Unable to pass the values to stored proc using presentation variable in OBI

Hi All,
Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
There is an OBIEE requirement whereby two prompts need to be defined.
1. Textbox prompt
2. Drop-down prompt
The dropdown values should be populated using textbox prompt. So, we have used presentation variable in textbox prompt and passing the same to select query of drop-down.
Until this step, the report works just fine.
Now, the value in both textbox and drop-down needs to be passed to stored proc.
While trying to pass the values by using the presentation variable, the following error comes-up saying
Session variable has no value definition.
Note:Although the corresponding session variable has been set to default value,still the error appears.
Please advise.
Regards,
Prasad

"Session variable has no value definition" I'm assuming typo error and it should be presentation variable.
Set default value for presentation variable that may work

Similar Messages

How to pass the values to stored proc using presentation variable in OBIEE

Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
There are 6 reports say ‘A’,’B’,’C’,’D’,’E’,’F’ in the same subject area.
The reports are being configured with prompts using either the repository/presentation variables.
One of the reports say ‘A’ has been configured to pass the values using presentation variables from the prompt in Advanced Tab of the report request to the stored procedure defined in the Execute Before Query section of the connection pool.
After running another report ‘B’ in the same subject area, upon visiting the report ‘A’ view display error is being seen ( Please have a look below screen shot for your reference) .
Speculate the issue is around presentation variables of report ‘A’ getting initialized even before running the report.
Appreciate your earliest advise as this is a prod issue.

Hi Prasad,
I got your note, you should not use Session variable syntax to call presentation variable.
you should use like @{AIC_PROJ_PLAT_SEQ_NO}
One more thing: first test the variable AIC_PROJ_PLAT_SEQ_NO value then try to pass to SP.
Hope this helps

Unable to pass the values from one report to another using navigation links

Hi All,
I am facing a strange issue where I have to pass a column value from one report to other.
I have kept navigation link in the 1st report and 'is prompted' option in the 2nd report
Issue was , I'm not getting the filtered result in the 2nd report (all the records are being displayed)
Can anyone advice where I was going wrong
Thank you,
AO

Hi,
The column which you have given navigation link and 'is prompted' column should same and exist in both the reports.You have to give the guided navigation in the value interaction of the column in the report1.
mark if helpful/correct.........
thanks,
prasanna

Unable to retrieve the values from stored procedure

Hi all
I written one procedure and when i am trying to invoke that store procedure from jdbc it is throwing the following error .
java.lang.ClassCastException: org.apache.tomcat.dbcp.dbcp.DelegatingCallableStat
ement
        at com.srit.hrnet.helpdesk.grievancemechanism.GrievanceComplaintDAO.getE
mployerGenDetails(GrievanceComplaintDAO.java:895)
        at com.srit.hrnet.helpdesk.grievancemechanism.GrievanceComplaintAction.d
eleteComplaints(GrievanceComplaintAction.java:1095)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchActio
n.java:276)
        at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:
196)
        at org.apache.struts.action.RequestProcessor.processActionPerform(Reques
tProcessor.java:421)
        at org.apache.struts.action.RequestProcessor.process(RequestProcessor.ja
va:226)
        at org.apache.struts.action.ActionServlet.process(ActionServlet.java:116
4)
        at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:397)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:173)
        at com.srit.hrnet.filter.SessionValidateFilter.doFilter(SessionValidateF
ilter.java:79)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:202)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:173)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:213)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:178)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:126)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:105)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:107)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
a:148)
        at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
:856)
        at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
ssConnection(Http11Protocol.java:744)
        at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpo
int.java:527)
        at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFol
lowerWorkerThread.java:80)
        at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:684)
        at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
        at com.srit.hrnet.helpdesk.grievancemechanism.GrievanceComplaintAction.d
eleteComplaints(GrievanceComplaintAction.java:1098)and my code is
store procedure is
============
create or replace procedure SP_HD_GRIEVANCE_DELETE_DETAILS(in_queryid IN number DEFAULT NULL,RC1      IN OUT globalPkg.RCT1)
as
queryId number(18,0);
BEGIN
SP_HD_GRIEVANCE_DELETE_DETAILS.queryId := SP_HD_GRIEVANCE_DELETE_DETAILS.in_queryid;
IF SP_HD_GRIEVANCE_DELETE_DETAILS.queryId = 1 THEN
         BEGIN
         OPEN RC1 FOR
        select HGRMCODE as compcode,emcode as applyEmpId,EMFNAME as assName,designame as desig,deptname as department ,to_char(HGRMOCCRDT,'DD/MM/YYYY') as occdate,
                    HGRMSLATYPE as category,HGRMSUBCAT as subcat,HGRMSLAPRIORITY as priority,HGRMSTATUS as status from EMP_MSTR,HD_GRIEVANCE_RM_MSTR,
                    dept_mstr,desig_mstr where EMCODE=HGRMAPPLYEMCODE and EMDEPTCODE=deptcode and desigcode=EMDESIGCODE order by HGRMCODE;
        END;
     END IF;
END SP_HD_GRIEVANCE_DELETE_DETAILS;and javacode is
==========
con = new DBConnection().getConnection();
java.sql.CallableStatement stmt = con.prepareCall("{call SP_HD_GRIEVANCE_DELETE_DETAILS(?,?)}");
                    stmt.clearParameters();
                    stmt.setInt(1,1);
                    stmt.registerOutParameter(2, OracleTypes.CURSOR);
                    stmt.execute();
                    cursor = ((OracleCallableStatement)stmt).getCursor(1);
list = new ArrayList();
                    while (cursor.next()) {
compTO = new GrievanceComplaintTO();
list.add(compTO);
}where GrievanceComplaintTO is formbean class
Please Guide me.
Thanks in advance.

Obviously, this
cursor = ((OracleCallableStatement)stmt).getCursor(1);fails because you don't get an OracleCallableStatement.

Passing array args into stored procs

Hi,
we are trying to use TopLink to perform the mapping of a pretty large schema (200+ tables). For the purpose UI presentation we only need a few different view types, not the full information in the schema, so we want to provide specific "view objects" mapped to the DB that can be batch read by their ids.
Defining views in the DB and mapping these to objects with TopLink doesn't work well because the views require joins and the tables are pretty large (the WHERE IN on the ids of the rows to read from the view is only applied after the entire view is instantiated).
Alternatively, we are trying to use stored procedures that take a VARRAY or TABLE OF INTEGER as input arg and return respective cursors. However, we couldn't figure out how to pass array infos into a stored proc using TopLink. Any suggestions?
Thx,
Olaf

I believe when you're doing it with an insert, you're saying "execute this insert statement a bunch of times, here's all the values in advance", which is different than passing an array to a stored procedure where you want it to execute once.
Oracle's ODBC driver doesnt support Associative Arrays (aka index-by tables).
Hope it helps,
Greg

Unable to capture the value of vbrk-vbeln value from VF02

Hi All,
am printing form from VF02 ,,,once i execute the VF02 , and select Billing Document -> Issue Output to option .., my printi program gets triggered ,......,
but in my print program am unable to capture the value of VBRK-VBELN which i have entered in the VF02 tcode..
any other table the value of VBELN is stored???
pls help me out with the alternatives...
thanks
john

Hi Dhiraj
One doubt how the value is populating in the NAST in the Print Program . While debugging i'm getting the Values from NAST but i want to know from where NAST is loading with these data.
Thanks
Bintu

How can I pass the value to another frame?

Hi all,
The following is part of my coding of a frame. Once i click on the jButton2, the selected value will be stored into a variable named NAME and the value will be displayed by a label in same frame. At the same time, a new frame named TESTING3 will be set to visible.
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt)
// TODO add your handling code here:
    String name = (String)jList1.getSelectedValue();
    jLabel1.setText(name);       //display the value in a label in same frame
    new testing3().setVisible(true);     //a new frame set to visible
}      Question: How can I pass the value to TESTING3 frame and display it on that frame?
Thanks,
ning.

just make an archive that save that variable and them get them from de clase were you save it
public class sav {
String n;
public sav {
n="";
public void addn(String x){
n=x;
public String shown(){
return n;
and them save it from the frame
sav sun = new sav();
sav.addn(f);
them call it from the other frame
sav sin = new sav();
String s = sin.shown();
label.setText(s);
and i think thats you want to do if its not please explain me better
bye

Button to call pl/sql stored proc using text box value as parameter

I need to create a portal page with an input text box and a button (or a clickable pl/sql item). A user will enter a value in the text box and click the button, a stored pl/sql procedure will be executed that takes the value of the text box as an input parameter. The procedure output (basically a success or an error message) must be printed in a new window which the user can close after checking the output. No redirection to another page is required.
I have no experience in developing portal pages and would appreciate if you point me in a right direction. Do I need to create an html form and obtain the value of the text box via p_session object? In this case what do I need to specify as ACTION for the form - the same page URL? Where should I place the call to the stored procedure? Or can I somehow use a pl/sql item?
Thank you for your help

Hi Arnaud
Thank you for the reply. Could you please give me dome more details. I have created a procedure:
create or replace procedure grant_roles (p_username varchar2) as
begin
<code>
htp.p('Grant succeeded for username is '||p_username);
exceptions when others then
htp.p('Grant failed. '||v_err_msg);
end;
and an html portlet:
<html>
<body>
<form name="input" action="/pls/portal/pls/portal_public.grant_roles_test?p_username=anna" method="get">
<input type="text" name="t_username" size="20">
<br>
<input type="submit" value="Grant">
</form>
</body>
</html>
Obviously this is not the right way to call my procedure as it does not work. And of course I want to pass the value of the t_username text box to the procedure not the string "anna". I am also not sure where a procedure prints its output. Is it possible to open a new window to display the output?
Thank you for your help,
Anna

How the values are stored in Claneder week/year internally

Hi BW Gurus,
Can any one please let me know in which format the values are stored in the Calender week.year time characterstic?
is it YYYYWW or WWYYYY or YYYY.WW or WW.YYYY or YYYY/WW or WW/YYYY?????
Thanks in Advacne,
Dilse...
Hash

Hi Bhanu & Alessanrdo,
Thanks for the prompt response. Actually I was trying to populate some values in to the calender week/year variable through the user exit.So, I got confused while updating the values in to the variable. I used the value format which you both had suggested. But no luck.
The olap control is passing out of my code successfully.
After the coming out of my inlcude program it entered in the function RRS_VAR_VALUES_EXIT_AFTER there the following if condition is met.
" IF -vartyp EQ rro04_c_vartyp-value". after that it raised the exceptions and the above message is displayed. Can you please look in to the issue.
and the message number that was shown is Message No: 00010004 with the following note :
"AError for variable in customer enhancement ZLASWK"
Can you suggest me why it went wrong and what needs to be done...?????
Thanks in Advance,
Dilse...
Hash

Job scheduling(passing the values to the child program)

when i'm trying to schedule a background job(using job_open job_submit and job_close) i'm passing the values of the selection screen(parent program) to my child program using set parameter id. And trying to get the values using get parameter id in the cild program.
But the values of the parent program are not being passed to the child program what may be the cause for it?

rathan,
Why con't you use
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
When you start an executable program, the standard selection screen normally appears, containing the selection criteria and parameters of both the logical database connected to the program and of the program itself (see Direct Execution - Reports). When you start an executable program using SUBMIT, there are various additions that you can use to fill the input fields on the selection screen:
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
These options have the following effects:
VIA SELECTION-SCREEN
The selection screen of the called executable program (report) appears. If you transfer values to the program using one or more of the other options, the corresponding input fields in the selections screen are filled. The user can change these values. By default, the system does not display a selection screen after SUBMIT.
USING SELECTION-SET <var>
This option tells the system to start the called program with the variant <var>.
WITH <sel> <criterion>
Use this option to fill individual elements <sel> of the selection screen (selection tables and parameters). Use one of the elements <criterion>:
<op> <f> [SIGN <s>], for single value selection
If <sel> is a selection criterion, use <op> to fill the OPTION field, <f> to fill the LOW field, and <s> to fill the SIGN field of the selection table <sel> in the called program.
If <sel> is a parameter, you can use any operator for <op>. The parameter <sel> is always filled with <f>.
[NOT] BETWEEN <f1> AND <f2> [SIGN <s>], for interval selection
<f1> is transferred into the LOW field, <f2> into the HIGH field, and <s> into the SIGN field of the selection table <sel> in the called program. If you omit the NOT option, the system places the value BT into the OPTION field; if you use NOT, the system fills OPTION with NB.
IN <seltab>, transferring a selection table
This addition fills the selection table <sel> in the called program with the values of the table <seltab> in the calling program. Table <seltab> must have the structure of a selection table. Use the RANGES statement to create selection tables.
WITH FREE SELECTION <freesel>, user dialog for dynamic selections
To use this option, the called program must be connected to a logical database that supports dynamic selections. In the calling program, use the function modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG. They allow the user to enter dynamic selections on a selection screen. One export parameter of these function modules has structure RSDS_TEXPR from the RSDS type group. Transfer the values of this export parameter by means of the internal table <freesel> of the same structure to the called report.
WITH SELECTION-TABLE <rspar>, dynamic transfer of values
You need an internal table <rspar> with the Dictionary structure RSPARAMS. The table then consists of the following six fields:
SELNAME (type C, length 8) for the name of the selection criterion or parameter
KIND (type C, length 1) for the selection type (S for selection criterion, P for parameter)
SIGN, OPTION, LOW, HIGH as in a normal selection table, except that LOW and HIGH both have type C and length 45.
This table can be filled dynamically in the calling program with all of the required values for the selection screen of the called program. If the name of a selection criterion appears more than once, the system creates a multiple-line selection table for that criterion in the called program. If the name of a parameter appears more than once, the system uses the last value. Note that LOW and HIGH have type C, so that the system executes type conversions to the criteria of the called program. This is important for date fields, for example. Before your program is used in a live context, you should check it using the VIA SELECTION-SCREEN addition.
Except for WITH SELECTION-TABLE, you can use any of the above options several times and in any combination within a SUBMIT statement. In particular, you can use the WITH <sel> option several times for one single criterion <sel>. In the called program, the system appends the corresponding lines to the selection tables used. For parameters, it uses the last value specified. The only combination possible for the WITH SELECTION-TABLE option is USING SELECTION-SET.
If the input fields on the selection screen are linked to SPA/GPA parameters, you can also use this technique to pass values to the selection screen (see Passing Data Between Programs).
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.
Pls. reward if useful...

Unable to see the values in detail block

Hello,
I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
Thanks
FM

IQ wrote:
I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
Does your non-database filed has associate any column ?
For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
FROM ACC_SUB_SUB_CONTROL
WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps

Unable to get the values from PAYLOAD

Hi,
i'm unable to get the values of payload. When i use
currentTask = client.getTaskQueryService().getTaskDetailsById(workflowContext, taskID);
Element payload = (Element)currentTask.getPayloadAsElement();
node = (Element)payload.getFirstChild();
System.out.println(node.getElementsByTagName("documentName").item(0).getNodeValue());
I get null but i instantiate the bpel process with a value and i have
- <payload>
- <ns1:DocumentReviewProcessRequest xmlns:ns1="http://xmlns.oracle.com/bpel/Review">
<ns1:documentTitle>vbvnmbvn</ns1:documentTitle>
<ns1:documentName>bvnbvnvn</ns1:documentName>
<ns1:URI>http://www.first.pt</ns1:URI>
<ns1:assignees>gestdoc</ns1:assignees>
<ns1:groups />
</ns1:DocumentReviewProcessRequest>
</payload>
if i use System.out.println(node.getElementsByTagName("HELLO").item(0).getNodeValue());
I get a normal erro 'cause this variable don't exist...
Can someone please help me?
Thanks!!

I think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
Like this:
com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
Please reward the points if this helps.

Help Creating A Link In An IR Report Passing The Value From A Different Col

Version 4.0.2.00.07
Hello,
I have an Interactive Report with a column that I need to create a link on but I need to pass the value of another column.
This report shows the Features of a particular Release. There is a select list for the Release that is selected and executes the report.
There is a column that indicates whether the Feature has a Commitment attached to it. If there is have that a link to another report that shows all the Commitments for that Feature by passing the FEATURE_ID which is also a column on the Feature report.
Query:
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
                                  ) THEN 'Yes' ELSE 'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....If "Commitment Exists" has a 'Yes', the 'Yes' is a link that will pass the FEATURE_ID to another report that will show the Commitments for that Feature. If the "Commitment Exists" has a 'No' then no link.
I was also wondering if the Commitment report could open in a seperate window and make it modal?
I hope this is clear and someone could help me.
Please let me know if it's not clear or more information is needed.
Thanks,
Joe

To accomplish this I would build the link as part of the value. So if Yes the Yes itself would be a link, if No is simply text as today.
It would look something like this:
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
       THEN
        '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
       ELSE
        'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....One problem with this approach is when you export the report (as a CSV for example). There are a few ways to handle this, one is to simply duplicate the column with clear text yes and no and set this column to be included on export and only visible on export. The other column, with the link, set it to no export.
The other option is to add another condition on the REQUEST value.
SELECT
      ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                   FROM customer_commitments cc
                                   WHERE ft.feature_id = cc.feature_id
       THEN
              decode(:REQUEST, 'CSV', 'Yes'
            , '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
       ELSE
        'No'
       END "Commitment Exists"
          ,ft.feature_id
FROM ....It seems that the link itself is getting replaced with a #. The link would look something like this:
'f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id
Hope this helps.
Oh and of course, in order for the link to display you need to change the Display Type to "Standard Report Column" otherwise the HTML will be escaped.
Thanks
-Jorge

Passing the values between two pages

hi all,
I am trying to pass the value from one page to another page. by referring the Link
http://www.youtube.com/watch?v=4eyzBiIf5MM&feature=related
I have created the code based on the demo. it is deployed without any issues. but when i press the hyperlink from the first page it is not moving to the second page.
Regards
C.Karukkuvel

Hi john,
My Requirement is to create a ADF page based on the Human Task with the Default payload. In that page when the user presses the empid link field, It will show all the information related to the employee id in a separate page.
so ,
1. i have created the View Object based on the Query with where clause
2. Create a bind variable for the where clause
3.Created s new page for displaying the employee details
4.drag and drop the both the pages (employee details, default page created by human task) into the adfcconfig file.
5.drag and drop the Execute with params into the adfcconfig file
6.wire it from human task page --> execute with params--> Employee details page
7.change the employee field in that human task page to a link field.
8.drag and drop the set property listener to that employee field.
Testing
Enter the input values for the Web service, logging to the BPM worklist, double click that task .it is showing the details when I press the employee id it is not navigating to the employee details page.
Thanks in advance
C.Karukkuvel

Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.R

Export your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'.

Unable to pass the values to stored proc using presentation variable in OBI

Similar Messages

Maybe you are looking for