Unable to post multiple files to the same receiver.

Hi Experts,
I am working on a file 2 file scenario.In which one file is divided into three different files and these three files are posted to the same receiver using different communication channels(because for all the files content conversion parameters are different) to the same directory with different file names.
The interface is working fine, no errors from PI side.
The problem is the content of these files is overwritten.

Hi Nithin,
Queue name can be anything, say TEST The significance iof having EOIO s all message will got to same QUEUE.Check the queue in moni and you can see that all messages have used the same queue.
>>I have given the Queue name as XBTI0002 and then provided the condition in the interface determination for all the receiver interfaces and checked the maintain order at runtime check box.
I meant four run here
1. Give Queue name, no condition and maintain runtime order is serlected ID
2. Give Queue name, first ID will not have condition for First Receiver interface and other two will have condition and maintain runtime order is selected ID : Result only one file is created (say A)
3. Give Queue name, first ID will not have condition for Second Receiver interface and other two will have condition and maintain runtime order is selected ID : Result only one file is created (say B)
4. Give Queue name, first ID will not have condition for Third Receiver interface and other two will have condition and maintain runtime order is selected ID : Result only one file is created (say D)
Regards
Suraj

Similar Messages

How can multiple files for the same genre be consolidated

I organize my iTunes files in genre folders for easy access. ITunes creates multiple folders for some genres and allows a single (preferred) genre file for other much larger files. How can I consolidate multiple files with the same genre?

Thanks. I've done what you selected. The problem is that despite all files being identified with the same genre, iTunes groups some genres in two separate folders. Thus, I have two "Country" folders, for example. More perplexing is that iTunes groups my largest genre folder, "Jazz", in a single folder.

HT1473 How do I get iTunes to download an entire album in one file versus splitting it into multiple files with the same Album Title?

I have added several CDs to my iTunes files, several Albums were added in the form of multiple files of the same Album title with random songs listed, but not the entire album in one file.
I have tried to reassemble the Album into one file, but could not find a way to do so.

Generally setting a common Album title and Album Artist will fix things.
For deeper problems see Grouping tracks into albums.
tt2

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

Load multiple files using the same data load location

has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
any pointers to possible solutions will be helpful

was able to resolve this. the implementation method is as follows
take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

Is it possible to upload multiple files at the same time?

Hi folks,
It seems pretty trivial to implement a file upload item, but is there some way to allow selection (upload) of multiple files at the same time? Seems like this has probably come up before, but I didn't find much for solutions in my search. Any links or insight would be appreciated.
Thanks!
-Adam vonNieda

Thank you both for your replies.
@Manish - That does allow for multiple file uploads without refreshing the page, but does not allow for multiple file uploads at the same time.
@Tony - That might be the way I end up going, although I probably should have been more specific. It would be really nice it there was a way to do a mutli-file select using the control or shift button like you can with a standard file selection dialog (if you want to copy multiple files, for example). Having a separate line for each file browser means there has to be a limit on the number that can be selected at the same time.
Has anyone implemented a method of selecting multiple files at once, and hitting an upload button once to get them into the database?
Thanks again Manish and Tony, very helpful.
-Adam

Question about auto-saving multiple files with the same template

Is there any way to do this? The template will never change - but I will need to save it as a new file each time I open it. Just want to know if there is an automatic way to do this when the template is opened each time? Preferably numeric, starting from any number. I suppose I can just save each file myself - but as it gets up into the thousands of files - I'm not going to want to.
It would be really cool if it could auto-save the file, assign it a number, and then place that number in the top corner of the saved document.
If anyone can help - let me know. C.

OK. First add a text field to the document, say "text1". You probably want it to be read-only. You can duplicate it to all pages if needed. Then open the template document, open the interactive JavaScript console (Ctrl+J), and enter the following code:
// Interactive Console JavaScript
// Get the folder this file is in
var folder = path.replace(documentFileName, "");
// Save multiple copies (from 1 to 9)
// with the number in the text field
for (var i = 1; i < 10; i += 1) {
getField("text1").value = i;
saveAs(folder + "template" + i + ".pdf");
After you paste the code, highlight the lines and press Ctrl+Enter (or the Enter key on the numeric keypad) and Acrobat will save multiple copies to the same folder as the template. Replace "text1" with the name of the field you've set up and "template" with the name you want the copies to have before the number.

How to read multiple files in the same folder?

Suppose I have 100 txt files in the same folder, and I want to read them one by one. (order is not important). File name is also part of the information I want.
How to do that?
Thanks

You need to use the directory to create a File (use the path name, w/o a file name). Then you need to ask for a list() (array of String containing name). To do that you'll need to implement the FilenameFilter interface, writing an accept() method that returns true if the file's name ends with ".txt".
If that's not perfectly clear, try the java.io API docs and return more specific questions.

How do you rename multiple files at the same time

how do you rename multiple photo files with a name at the same time?

This would be an excellent use of Automator. Here is a link to some instructions on how to do this using Automator.
http://www.youtube.com/watch?v=Ie6zGxo2D-o
If you don't like that then Google "Renmame multiple files Automator" and you will find many tutorials available.

How do i delete multiple files of the same video in the "all videos" folder?

i am running out of space on my computer so i went to the "all movies" folder to see if there were items there i could get rid of. when i went i discovered that there were many instances of the same video being there as many as 4 or 5 times. why is that? i tried to delete them but they still remain. how can i single it down to just one file?

try the script (version 3) in this post,
Remember last folder location lost with Mac Lion updates

Multiclip on FCP 7 with timecode: multiple files for the same camera have different Angle

I have FCStudio 7 with OS 10.6.8
I just filmed a concert with 6 cameras (Sony XDCAM). They are all timecode sync'd.
For various reasons there are multiple vid files for each camera (i.e. 172_003 thru 172_006 for camera 1).
I imported into FCP 7 using SonyXDCAM plug in with no problems. Each camera file group was given its camera number as the Reel Name (i.e. Camera 1) and that camera's number as its Angle Name (i.e. 1).
Now when I try and create a multiclip using all six cameras, instead of keeping all the files for a specific camera under a single angle name it treats each file as its own camera angle. It treats each file as an individual camera instead of having the files flow as a single clip from a single camera based on their timecode. In viewer I have 8 different angles for a single camera (because of 8 files). In the make media window for multiclip, the Angle Name is different for each clip but its position is still aligned to its timecode.
I worked the same project last year and the multiple files for each camera lined up fine, based on its timecode value and camera/reel name. I can't see what has changed.
I need each camera's files to sync under that camera Angle Name, and for the files to play in the same angle spot in viewer.
All advice welcomed as I'm in a major time crunch to complete the job.
Thanks.

Well why not just prebuild each angle in its own sequence with sequence timecode matching the source timecode? Export with current settings and import these files back into fcp and then create your multiclip.

After updating firefox today to 6.0, firefox is unable to load multiple tabs at the same time. When I try, firefox refuses to load any pages, and instead is stuck trying to connect to each page.

After I updated firefox to 6.0 today firefox has developed a problem loading multiple tabs. When I try to load 10+ tabs, either at the same time or by opening each tab separately, each tab is stuck trying to connect to the desired page. This continues if I close all the tabs and try to load a single page, the single page is unable to get pass connecting. In order to load a new page when this situation arises I must close down firefox and start again, and the program has no history of the previous session.

Other solutions
* https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_other-solutions
Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their databases before doing a scan.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Windows Defender Home Page -
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free - http://www.lavasoft.com/products/ad_aware_free.php
There are also specialized forums for Malware Removal such as those listed below, where you might be able to get more help:
* Bleeping Computer Forums - http://www.bleepingcomputer.com/forums/
* Spyware Warrior Forums - http://www.spywarewarrior.com/index.php
* SWI Forums - http://www.spywareinfoforum.com/
Check and tell if its working.

How do i rename multiple files at the same time on a MAC?

I have been a mac user since 4 years now yet i cannot figure out how to rename multiple files in mac. In Pc i used to slect all and rename one e:g "ab.jpg" and the restwould be "ab (1).jpg" automatically. but in the mac its way too hard to do this on the automator. ..
please advise asap!
~haniah

You can do it with Automator.
http://www.automator.us/examples-01.html
Or with a utilities like these:
http://www.publicspace.net/ABetterFinderRename/
http://renamer4mac.com/
You can also do it using the Terminal command line.
Matt

Multiple files with the same file name within the same folder

It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
Please advise.

Misio wrote:
It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
the extension is simply hidden. go to the get info panel for the file and uncheck the option to hide the extension.
Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
Please advise.
it sounds to me like you saved one file as 000.jpg and the other and 000.jpg.jpg.
check the info panels for the files for full names to verify if this is the case.

Unable create a target file with the same name

Hi,
I have to pick an attachment from a web service and place the attachment in
a folder, with the same name (Attached File Name). I tried this using SOAP to file
scenario. Using SOAP, I'm able to get the attachment inside PI with the same
name, but not able to generate the file in the receiver end.
Please let me know if this is possible or else is there any other way to do
it.
Regards,
Deepak Ravi

Check also:
Combining three different aspects of PI (ASMA, AF Module and variable substitution) in one shot
Dynamic Configuration vs Variable Substitution - The Ultimate Battle for the File Name
Regards

Unable to post multiple files to the same receiver.

Similar Messages

Maybe you are looking for