Unable to preview existing SSRS reports in VS2010 x64

I cannot preview any SSRS reports in VS2010, there are no errors, warnings or messages. Output window says "Build: 1 succeeded or up-to-date, 0 failed, 0 skipped."
The preview window reads:
An error occurred during local report processing.
An error has occurred during report processing.
No other messages are provided.
Clue. recently my PC was re-imaged to Win7 x64. Of course VS2010 Ultimate and SQL 2012 tools (with data tools) were installed then and updated from windows update. I just finished running a repair/reinstall on both back to original but that did
not help.
Thanks for any help!

Hi Mac,
According to your description, it seems that you are creating an application with ReportViewer control in Visual Studio, then you are getting error in both Local processing mode and Remote processing mode when debugging the application. If in this scenario,
we can refer to the steps below to troubleshooting this issue:
Delete the current ReportViewer control in the application, then insert a new ReportViewer control to ensure the properties for the control is set correctly.
Create a very simple report, for example, just a textbox with value 1 in the report without any data source and dataset. Then display it in the ReportViewer control with Local processing mode.
• If it works very well, the issue can be caused by report. Then we can display a report which works well on report server in the ReportViewer control with Remote processing mode to check this issue.
• If it failed, the issue can be caused by ReportViewer control. Then we can try to reinstall the ReportViewer control with the following link to check again:
http://www.microsoft.com/en-in/download/details.aspx?id=6442
Besides, we can try to view the detail event logs with
Windows Event Viewer. If the issue still existed, please provide us more information about the issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Unable to select the SSRS report parameters and execute the reports.

Hi All,
We have set of SSRS reports and are been published to SharePoint 2010.After that I have enabled Anonymous user access at SharPoint side,after enabling Anonymous user access no one is able to access the reports so I have removed Anonymous user access
and the reports are working as normal in IE (internet explorer) but not working thorugh CITRIX (before Anonymous user access provided reports are working normal in CITRIX too), able to open welcome page of sharepoint and unable to select any parameters and
unable to execute the rpeorts.
Could you please suggest if you have any solutio as it is very urgent for me.
Regards,
Santosh
Santosh

Have you tried the basics, such as clearing the browser cache? Note that depending on the version of SSRS in use, Anonymous is not supported with SSRS.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Lync 2013 custom SSRS reports from CDR

Trying to replicate canned Lync 2013 User Activity Report, but with more filtering capability, using SSRS. Necessary to do this way because we're adding details like user names, departments and locations from our Active directory.
Have been unable to ever find support on WHAT the query or stored proc IS behind the UA report. If I have that code I can incorporate that with our data.
Any help appreciated!
Jim Nelson
James Nelson

The CDR schema can be found here, which will be helpful for creating your reports:
http://technet.microsoft.com/en-us/library/gg398570.aspx
Most queries start from the SessionDetails Table:
http://technet.microsoft.com/en-us/library/gg398589.aspx
For hacking up existing SSRS reports to see what procedure or view they call, you'll have better luck asking in the SQL forums.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

SSRS Reports In IE 10.0.9200.17183

Hello,
I have a SSRS report deployed.
I'm unable to generate the SSRS report in IE 10. Is there any settings in SSRS Report or IE 10.
Thanks in advance
Regards,
Shraddha Gore

Hi,
Also please refer to these similar threads:
https://social.technet.microsoft.com/Forums/ie/en-US/168cd20d-a715-4462-9406-bff0c21e2290/ssrs-report-is-not-displaying-ie-10-and-above?forum=sqlreportingservices
http://forums.asp.net/t/1985989.aspx?SSRS+Report+is+not+displaying+IE+10+and+above
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cannot preview SSRS report in Visual Studio 2012 - assembly does not allow partially trusted callers

Hi,
I have an SSRS report that works fine in Visual Studio 2008 BIDS. This report references a .Net assembly namely:
System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
I use this assembly in some simple Code functions in the report. e.g.
System.Web.HttpUtility.UrlEncode(inURL).ToString
I have converted the SSRS project to 2012 and am trying to preview the report. However, I get an error relating to: "That assembly does not allow partially trusted callers". If i deploy the rdl to my local SSRS it renders fine, but
how do I fix Visual Studio to preview the report without error? This is highly annoying.
My Visual Studio version is:
Microsoft Visual Studio Professional 2012
Version 11.0.61030.00 Update 4
Microsoft .NET Framework
Version 4.5.51641
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3402.0
Any help is appreciated on this one.
Regards,
MrHH

Hi MrHappyHead,
According to your description, you used custom assembly in the report, when you run the report in Visual Studio 2008, the report works fine. When you run the report in Visual Studio 2012, the error message occurred: "That assembly does not allow partially
trusted callers". But the report works fine after you deployed it to report manager.
Only applications that are fully trusted by the runtime code access security system are allowed to access a shared managed code assembly that is not explicitly marked with the System.Security.AllowPartiallyTrustedCallers attribute. A partially trusted assembly
(one that is registered in SQL Server with the SAFE or EXTERNAL_ACCESS permission set) that attempts to access a strong-name signed assembly without this attribute causes a System.Security.SecurityException to be thrown. To troubleshoot the problem, please
refer to the following steps:
Add namespace system.security to AssemblyInfo.cs file
Add [assembly:allowpartiallytrustedcaller] to the file.
Set trust level to "Full" in web.config file
For more information, please refer to the following document:
http://support.microsoft.com/kb/2869522/en-us
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

SSAS report action to pass multi-value list of dimention key values to a SSRS report parameter

This was originally posted on StackOverflow and suggested I try here as well.
I want to create a report action in an SSAS OLAP cube that generates a list of formatted values to pass into an SSRS report parameter that accepts a multi-valued parameter list. This would be applied at the
cell level in the SSAS action. I have found a solution that gets me most of the way:
How to Pass Multiple Values from an SSAS Report Drill Through Action to an SSRS Multi-Value Parameter, but not quite. The action does appear in Excel and works
if I run the action from a cell that is at or below the dimension attribute I am generating the list for, in this case,
Account Key.
Below is a link to a screen capture (unable to embed it due to lack of reputation) showing the action and dimension structure in Excel. The action works as long as I run it at the
Account Key level or below. I want to be able to run it at higher levels, such as
Account Major and still have it generate all then related Account Key values for the SSRS report parameter. Running it at the higher
Account Major level does not trigger the report to run.
Excel Action Screen Shot:
http://i.stack.imgur.com/QCGSp.png
Below is the MDX I am using to generate the value for the report parameter:
UrlEscapeFragment(
GENERATE(
DESCENDANTS(
[Account].[Account Key].CurrentMember,
[Account].[Account Key].[Account Key]
[Account].[Account Key].CURRENTMEMBER.Name,
"&rp:Account="
I am hoping that I can somehow modify the MDX above to make it return all the
Account Keys for any attribute of the Account dimension when ran from any measure cell, not just when ran at self and children of
Account Key in the pivot table.
Also, if it helps, I can execute the following MDX query on the cube and get the results I am looking for.
WITH MEMBER [Measures].[Account Key List] as
GENERATE(
DESCENDANTS([Account].[Account].CurrentMember, [Account].[Account].[Account]),
[Account].[Account].CURRENTMEMBER.NAME,
"&rp:Account=")
SELECT {[Measures].[Account Key List]} on 0,
([Account].[Account Company Number].[Account Company Number],[Account].[Account Major].[Account Major]
) on 1
FROM [Company 10 Action Demo]
Below are partial results:
10.116&rp:Account=10.116.010
10.117&rp:Account=10.117.010&rp:Account=10.117.020
10.120&rp:Account=10.120.005&rp:Account=10.120.006&rp:Account=10.120.010&rp:Account=10.120.020&rp:Account=10.120.030&rp:Account=10.120.040&rp:Account=10.120.050&rp:Account=10.120.060&rp:Account=10.120.380&rp:Account=10.120.999
10.123
Questions
Any ideas what I might need to do to get Account Key to be returned for any attribute of the
Account dimension?
Would I possibly have to alter my Account dimension in the cube to get this to work?
Thanks in advance.
Edit 1 - Adventure Works Cube Version
I was unable to get the suggested answer with the "Exists" function to work. To better demonstrate this issue, I have recreated it using the Adventure Works Cube.
I will focus on the Customer dimension, specifically the Customer and
Education attributes. I created a report action called Test Report Action. Below is the XML created for it in the cube.
<Action xsi:type="ReportAction" dwd:design-time-name="f35ad5ee-5167-4fb8-a0e0-0a74cc6e81c6">
<ID>Report Action 1</ID>
<Name>Test Report Action</Name>
<TargetType>Cells</TargetType>
<Target></Target>
<Type>Report</Type>
<ReportServer>SQLSERVER</ReportServer>
<Path>ReportServer?/Test Report</Path>
<ReportParameters>
<ReportParameter>
<Name>Test Customer Existing</Name>
<Value>UrlEscapeFragment(
GENERATE(
EXISTING DESCENDANTS(
[Customer].[Customer].CurrentMember,
[Customer].[Customer].[Customer]
[Customer].[Customer].CURRENTMEMBER.Name,
"&rp:Customer="
)</Value>
</ReportParameter>
</ReportParameters>
<ReportFormatParameters>
<ReportFormatParameter>
<Name>rs:Command</Name>
<Value>Render</Value>
</ReportFormatParameter>
<ReportFormatParameter>
<Name>rs:Renderer</Name>
<Value>HTML5</Value>
</ReportFormatParameter>
</ReportFormatParameters>
</Action>
Below are the steps to re-create the issue.
Connect to the cube in Excel
Add dimension Customer -> More Fields -> Customer
Add measure Internet Sales -> Internet Sales Amount
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action" and see customer values created for URL
When the action is ran at this point with Customer, I see the values created in the URL shown message box (since there is no SSRS report server at location specified).
Now the part I'm unable to resolve
Remove the Customer dimension and add Customer -> Demographic -> Education
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action"
Nothing happens. If I ran the action on the cell next to "Bachelors", I would want it to build up all the list of all the "Customers" that make up the "Bachelors" in the
Customer dimension as part of the report parameter. If no attributes where used in the cube from the
Customer dimension for that cell, then I would like it to return "All Customers", or something similar to show that all customers are included in the aggregations.
I am not too MDX savvy, thus far. I think I need to somehow join the
Customers to Internet Sales Amount in the Generate function portion. I have tried several different combinations of the
Customer dimension and Internet Sales Amount, along with various functions to see if I could get this to work with no success. I am hoping that someone more knowledgeable the me will have a solution. If you need more details,
please ask and I will provide them.

Simon,
Thanks for you help with this. This morning I found a workaround. Below describes what that is.
What I ended up doing was getting a list of values from a degenerate dimension that I could use to pass to SSRS to get a list of transactions for a report. Below is how I did this, in relation to the Adventure Works cube using the degenerate dimension
Internet Order Details.
WITH MEMBER [Measures].[Order Param List] AS
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
SELECT {[Measures].[Order Param List], [Measures].[Internet Sales Amount]} ON 0
,([Date].[Calendar].[Date]) ON 1
FROM [Adventure Works]
This will get a list of Sales Order Number in a text string, separated by "&rp:OrderNum=" for each measure of
Internet Sales. This would allow me to create an SSRS report to bring back detail information for each
Sales Order Number. Below are some sample results.
May 16, 2007 SO50493&rp:OrderNum=SO50494&rp:OrderNum=SO50495&rp:OrderNum=SO50496&rp:OrderNum=SO50497&rp:OrderNum=SO50498&rp:OrderNum=SO50499&rp:OrderNum=SO50500 $12,157.80
May 17, 2007 SO50501&rp:OrderNum=SO50502&rp:OrderNum=SO50503&rp:OrderNum=SO50504&rp:OrderNum=SO50505&rp:OrderNum=SO50506&rp:OrderNum=SO50507&rp:OrderNum=SO50508 $13,231.62
May 18, 2007 SO50509&rp:OrderNum=SO50510 $4,624.91
With this, I can then create a Report Action in SSRS with a Parameter Value of
UrlEscapeFragment(
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
The way I was going about it before was flawed, as I was trying to get a list of the granular values from each dimension used to build the measure value and pass each one of those as separate parameters. I just needed to set something unique for each fact
measure transaction that represents the value and uses that in a query parameter for the SSRS report.

How to get value with two parameter fro sharepoint list in SSRS reporting

Hi
I am using Sharepoint list and fetching data in SSRS.
Using three parameter as Department,Section and subsection.
with filter everything working fine,but if i use category All and Sub category all for particular department,unable to get record.
please let me know how to implement.
Help will be appreciated.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Hasan,
Per my understanding you want to add mutilple value parameters to filter the data in the sharpoint list datasource report, right?
I have a test based on the step by step details information in below link and all works fine which will make the multiple value parameter works fine:
https://audministrator.wordpress.com/2014/02/17/sharepoint-list-add-distinct-parameter-value/
Add the custom code from above link
Parem1 is the parameter which get values from a query and with all the values(duplicate value),please setting as below:
Param2 is the parameter which will display in the report have done the deduplication, check the "Allow Multiple values" and then Specify the available value and default value using below expression:
=Split(Code.RemoveDups(JOIN(Parameters!Param1.Value, ",")), ",")
Add the filter and preview.
Similar thread below for your reference:
SSRS reporting with sharepoint list using Distinct and Multivalue
parameters
If i have some misunderstanding, please try yto provide more details information about your requirements.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to get period date of for a given month from a given date in mdx for SSRS report (mm/dd/yyyy)

I have a situation, where i need to write expression Period to date(PTD). i want to know how to get the period date. i want you to help in writing Period date or else is there any function to get period date for a given date(the date is given
from the parameter dynamically) in MDX for SSRS report
ram

Hi ram,
Per my understanding that you want to get the period date based on the month selected and the given date, right?
Could you please provide details information below to help us better understanding your requirements, thus we will be more effective to provide an solution:
What is the format of the period date you want to get, is this date in the DB and you want to filter it based on the month and the given Date?
Did the month and given date are two parameters in the report? if possible, could you please provide some sample data in the DB and also the snapshot of the report structure
I assume you want to get the period date(mm/dd/yyy) between the select month(e.g:Feb) and the given date (10/1/2014) and you should get the date between(02/01/2014-10/1/2014).
If so,and you also have two parameter "Month","EndDate"(EndDate is the given date), please reference to details information below:
You can create an new parameter "BeginDate" (Date/Time) which is the begin date of the period, you can use the expression to get the value based on the value of the month and the year value from the given date,finally hide this parameter:
Specify the available value:
Label:=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value)
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Specify the default Value:
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Add filter to the dataset as below:
Preview you will get all the date in the given Period:
If you still have any problem, please feel free to ask.
Regards
Vicky Liu

SSRS report with tabular model - MDX query to filter parameter data based on Tuple value.

Hello Everyone,
I am working on SSRS report in which a tabular model is being used as a backend.
I want to filter the report parameters which are dependent to other parameters. Like, country, state, and cities drop downs.
All are multi-select parameters. I am using MDX queries to filter the parameters data.
Based on selected one or more countries, the data of states needs to be filtered.
The point is the text which is being displayed in state dropdown for each state name is combination of 3 different members.
So, I created the following Tuple for the same and can see the expected display names in states dropdown.
"("+
[Location].[Code 1].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Code 2].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Descr].CURRENTMEMBER.UNIQUENAME +")"
Now, when I would like filter the cities data based on selected one or more states, I am unable to pass the multiple Tuples (more than one selected Tuples) as parameter for cities dropdown.
The following is my query for City parameter. It is working well when I select only one State from the dropdown.
However, when I select multiple states, it is unable to convert the Tuple into SET in ELSE part of IIF condition specified in following query.
Can anybody help me how to resolve the error that I am getting about STRTOSET function?
Or
Are there any other alternatives to achieve this requirement?
Any help would be much appreciated.
Query:
WITH MEMBER [Measures].[ParameterCaption] AS [City].[City Business].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS [City].[City Business].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS [City].[City Business].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS ,
[City].[City Business].Children ON ROWS
FROM (
SELECT ( STRTOSET(@State, CONSTRAINED) ) ON COLUMNS FROM [Model])
WHERE ( IIF( STRTOSET(@State).Count= 1,
STRTOTUPLE(@State, CONSTRAINED),
STRTOSET("{
("+
[Location].[Code 1].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Code 2].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Descr].CURRENTMEMBER.UNIQUENAME
+ ")
}",CONSTRAINED )) ) CELL PROPERTIES VALUE
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Hi,
I used following dynamic query in expression of dataset of parameter and it works like a charm.
"WITH MEMBER [Measures].[ParameterCaption] AS [City].[City Business].CURRENTMEMBER.MEMBER_CAPTION "&
"MEMBER [Measures].[ParameterValue] AS [City].[City Business].CURRENTMEMBER.UNIQUENAME "&
"MEMBER [Measures].[ParameterLevel] AS [City].[City Business].CURRENTMEMBER.LEVEL.ORDINAL "&
"SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , " &
"[City].[City Business].Children ON ROWS " &
" FROM [Model] WHERE ({"& join(Parameters!Location.Value,",") &"}) CELL PROPERTIES VALUE"
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

SSRS Report with mutli select values in parameters

Hi All,
I am creating a SSRS report and displaying the result in tablix. I want to make the report to filter by multi select values from the parameters.
I have 3 parameters. For all the three parameters, I have set "Default Values" and "Available Values". Also, modified my result dataset to get the values from parameters using "WHERE ID = @Parameter1" (example) and so
on..
3 Parameters types: 1. Yes or No
2. Date 3. Values with NULL in the DB
Problems:
1. When I am passing the default values "Yes" "No" - it is throwing errors because default values is passed as Yes "AND" No instead of "OR" condition. The value stored in the DB wil have either Yes or No but not both.
2. When I am querying the date values, it is a DateTime field in the DB. But I have queried like SELECT CONVERT(DATE, EXE_DATE) AS DATE FROM table which is giving only date in SQL but in SSRS displaying date with time.
3. When I pull the list of values for third Parameter from SQL, it has some NULL values. When I try to use it in SSRS, it is not displaying the NULL value as select option in the list of values
Any suggestions for the above three problems for SSRS with multi select values as filter will be helpful.
Maruthu | My Blog

Hi Maruthi,
Regarding the three things:
1.) I believe your first parameter is mutliselect , please convert it to single select.
Steps:
a.) Select the parameter, right click and go to parameter properties
b.) Under General Tab in DataType section remove the checkbox for Allow Multiple Value.
2.) Instead of returning as the date please return string. For example :
SELECT CONVERT(VARCHAR, GETDATE(),101)
Here is the list of conversion : http://www.sqlusa.com/bestpractices/datetimeconversion/
3.) As such there is no concept of null in SSRS. (Its a relational concept) . We do have nothing , which means empty. In Order to use null please select the Allow null option in the DataType section of the Parameter, This will add an checkbox for null in
the report preview. Its developer job to handle the null values in there query.
Regards Harsh

What is the best way to create a SSRS Report with Header Data and its associated child data

So I have Member Information...Member ID...Member Addressing...etc.. I want to display this in the top part of the report like...
Member Name:
Member ID:
Member Address Line 1:
And then below I want to report on all the claims associated with a Member ID that is chosen by the Parameter. Obviously the Claim Data will be in Table format. Do I necessarily have to associate the Member Information with the Claim Information or simply
use the same parameter? And what is the best Toolbox item to use to display the Member Information on top?
Any help or guidance is greatly appreciated by this newbie.
Thanks for your review and am hopeful for a reply.
ITBobbyP

Hi ITBobby,
According to your description, you want to display all Claim Data for each Member. Right?
In Reporting Services, we can use a table to display those Claim Data and make them group on Member ID. If you want to display the Member Information, we can put the data fields on parent group level. Then we can use create a parameter to filter the Member
ID we need. We have tested this scenario in our local environment. Here are steps and screenshots for your reference:
1. Create a DataSet(DataSet1) which contains the data fields of Member and Claim.
2. Create a table and drag the Claim data into the table.
3. In Row Group. Right click on Details and add a parent group.
4. Select Member_ID in Group by.
5. Right click on the textbox of Claim data. Select Insert Row->Outside of Group-Above. Drag the MemberName into the inserted row.
6. In Report Data, right click on Parameter-> Add Parameter.
7. Type Member_ID in Name and Prompt, select allow multiple values.
8. In Available Values, select get data from a query. Choose DataSet1, select Member_ID in values and label. You can also set this in Default Values if you need.
9. Save and preview.
Reference:
Understanding Groups (Report Builder and SSRS)
Report Parameters (Report Builder and Report Designer)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS report does not rendering properly in sharePoint 2013

Hi everyone,
I'm a newbie with the MSBI development tool, I've tried to create a testing SSRS reports and its layout showed correct when preview them in Visual Studio (2010 and 2012). Then I migrated the report in SharePoint 2013, but the layout do not rendering as I
expected, some data mix-up on the matrix table
The Ident on detail data (drill down) does not render properly compare the layout in when preview in Chrome or Visual Studio (SSRS)
The summation on second matrix table went wide on both browsers compare when preview thereport in Visual Studio
The export PDF (using the "action" button on the report in the browsers) showed the second matrix table is overlaps the first matrix table.
This report has 3 main queries (2 for the matrix tables and 1 for the chart) on a Dev environment:
Window server 2008 R2 with service pack 2
SQL server 2012 enteprise with service pack 2
SharePoint 2013 (no service pack) with integrated mode on the report service
Visual Studio 2010 development tools
I'm very appreciate for anyone can provide any solution to solve this issue.
Thank you so much,
Dac.
P.S.: I attached the preview of the report in both browsers (IE & Chrome) and its preview in Visual Studio.
An update: ... due to the setting space on"snap to grid" default to 20 and I've made the 2nd matrix table overlaps the 1st one, therefore the it showed overlaps when export to PDF file ... it's solved.
But the Indent on IE and summation still persist in both browsers.

Hi everyone,
The PDF's export has been solved due to the 2nd matrix table overlaps on the 1st table.
Also, I don't know why the summation (aka Row Total) went wide when data represented on the 2nd matrix table (see previous post on the row named as "Premium over 5000$" on both browser. So I've redesigned the 2nd table as normal table instead of
matrix table ... and the summation showed correct (it's so weird)
For the "Indent" issue showed in IE on both drill down of the 1st table and 2nd table which cannot be fixed, and the end user used only IE.
Could someone can enlighten me please?
Many thanks.

Issue while opening SSRS Report with Oracle as Datasource in Report Manager

I deployed SSRS report in Report Manager but I am unable to generate that report. Am getting following error.
Is it problem with datasource in report manager? I am not able to change the Data source type to Oracle. It is showing Microsoft SQL Server. How can I change it, no other options are coming except Microsoft SQL Server. Please help.
An
error has occurred during report processing. (rsProcessingAborted)
Cannot
create a connection to data source 'TEST_DS'. (rsErrorOpeningConnection)
For
more information about this error navigate to the report server on the local
server machine, or enable remote errors

When I deploy them in localhost, and try to run report in report manager, it is not showing any data source type in drop down list except MS SQL Server. I do not know why it is showing in BIDS and not in report manager!!!
Hello,
Based on my test, I can specify the data source type as Oracle after deploy the report to Report Manager and open the report Data source propertity page. If the report use the shared data source, you should check the specify data source at the Data Source
folder. Please refer to the following screen shot:
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

User Was Not Found when trying to run SSRS report!

I'm trying to run SSRS report (Custom Reports) for Dynamics CRM 2011. However, when I try to run the report from the Reporting Manager it errors out "User Was Not Found"!
Here's the complete error log:'
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DSMain'. (rsErrorExecutingCommand)
Microsoft.Crm.CrmException: An unexpected error occurred. System.ServiceModel.FaultException`1[[Microsoft.Xrm.Sdk.OrganizationServiceFault, Microsoft.Xrm.Sdk, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]:
User Was Not Found <OrganizationServiceFault xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/xrm/2011/Contracts"> <ErrorCode>-2147220969</ErrorCode> <ErrorDetails xmlns:d2p1="http://schemas.datacontract.org/2004/07/System.Collections.Generic">
<KeyValuePairOfstringanyType> <d2p1:key>CallStack</d2p1:key> <d2p1:value xmlns:d4p1="http://www.w3.org/2001/XMLSchema" i:type="d4p1:string"> at Microsoft.Crm.ServerLocatorService.GetCrmUserId(Guid organizationId,
String authenticationInfo) at Microsoft.Crm.Sandbox.SandboxHostSids.IsCallerAllowed(SandboxSdkContext requestContext, String& expectedSidSddlForm, String& callerSidSddlForm) at Microsoft.Crm.Sandbox.SandboxSdkListener.AuthenticateCaller(SandboxCallInfo
callInfo, SandboxSdkContext requestContext, String operation) at Microsoft.Crm.Sandbox.SandboxSdkListener.Execute(SandboxCallInfo callInfo, SandboxSdkContext requestContext, String operation, Byte[] serializedRequest)</d2p1:value> </KeyValuePairOfstringanyType>
</ErrorDetails> <Message>User Was Not Found</Message> <Timestamp>2014-05-09T21:37:02.5487525Z</Timestamp> <InnerFault i:nil="true" /> <TraceText i:nil="true" /> </OrganizationServiceFault>
An unexpected error occurred.
User Was Not Found

Hello,
Can you preview the report in Report Builder or Report Designer?
Based on the error message, the issue may related to a invalid user account for the report data source credentials.Please verify the user account is valid and has sufficient permission to access CRM data source.
You can refer to the following blog to troubleshooting CRM custom report rsProcessingAborted error:
http://blog.simpletrees.com/2013/04/mscrm-and-dreaded-rsprocessingaborted.html
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to change the message in a cell of a ssrs report to a hyperlink dynamically

Hi,
I am developing a ssrs report.
I want to change the message to hyperlink for a particular message and not all messages of a column.
and link it to another report.
for e.g-if a cell of the column has values A,B,C then I want to change only cell with values C as hyperlinks and not A and B

Hi fanu987,
According to your description that you want to conditional add the hyperlink according to different values in the fields, the link is to another report, right?
I have tested on my local environment and we have two method to do this: one method is to choose ”Go to report” and add expression to conditional add the link which will link to the subreport for the special values, another method is to create
an placeholder and add the HTML tag to conditional hyperlink to the URL of the Subreport in the Report Server.
Details information for your reference:
Method one: "Go to Report":
Right click the fields which will add the hyperlink and select the “Textbox Properties”, click the “Font” to add expression conditional add an underline for ”Text1” which have the hyperlink function and change its color to blue. (expression add to
"Effect" and "color"):
Effect:
=IIF(Fields!YourHyperlinkFields.Value="Text1","Underline","default")
Color:
=IIF(Fields!YourHyperlinkFields.Value="Text1","Blue","Black")
Click "Action" to select the "Go to Report" and using this expression in the "Select a report from the list" (If the value is "Text1" then link to Subreport or it will just refresh on the main report):
=IIF(Fields!YourHyperlinkFields.Value="Text1","SubreportName","mainReportName")
If have parameter delivery between main report and the subreport, add expression to omit this parameter for the fields which value is not "Text1":
=IIF(Fields!YourHyperlinkFields.Value="Text1",false,true)
Method two: Create Placeholder and using the HTML tags to conditional add the hyperlink which will link to the subreport URL in the Report Manager.
Double click the fields which will add the hyperlink and select the "Create Placeholder".
In the Placeholder properties window, add this expression in the Value to add hyperlink only to the "Text1" and check the "HTML- interpret HTML tags as style under the "Markup type" section:
=IIF(Fields!YourHyperlinkFields.Value="Text1", "<a href=""Subreport Link in the Report Manager"">" & Fields!YourHyperlinkFields & "</a>" ,Fields!YourHyperlinkFields.Value)
You can also add parameter in the URL if you have parameter delivery between main report and the subreport. Finally preview will have the report like below:
If you still have any problem, please provide us more details information.
Any problem, please feel free to ask!
Regards
Vicky Liu

Unable to preview existing SSRS reports in VS2010 x64

Similar Messages

Maybe you are looking for