Lync 2013 custom SSRS reports from CDR

Trying to replicate canned Lync 2013 User Activity Report, but with more filtering capability, using SSRS. Necessary to do this way because we're adding details like user names, departments and locations from our Active directory.
Have been unable to ever find support on WHAT the query or stored proc IS behind the UA report. If I have that code I can incorporate that with our data.
Any help appreciated!
Jim Nelson
James Nelson

The CDR schema can be found here, which will be helpful for creating your reports:
http://technet.microsoft.com/en-us/library/gg398570.aspx
Most queries start from the SessionDetails Table:
http://technet.microsoft.com/en-us/library/gg398589.aspx
For hacking up existing SSRS reports to see what procedure or view they call, you'll have better luck asking in the SQL forums.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Similar Messages

Custom SSRS report dev from Lync Server 2013

Trying to replicate canned Lync 2013 User Activity Report, but with more filtering capability, using SSRS. Necessary to do this way because we're adding details like user name, department and location from our Active Directory.
Have been unable to ever find support on WHAT the query or stored proc IS behind the UA report. If I have that code I can incorporate that with our data.
Any help appreciated!
James Nelson

Hi,
Check whether the SBC support REFFER if not disable REFFER from Lync Server Trunk configuration.
Please check if the SBC is supported with the help of the link below:
http://technet.microsoft.com/en-us/lync/gg131938
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Project Server User Security + Custom SSRS Reports Project List Parameter

Hello, below is the issue / challenge scenario:
I'mnt. We have to remove the smaller chunk of queries that are hitting the published database to get the user security permissions. I'm using custom SSRS reports that are pulling data from Reporting database and other custom financial SQL DB's. I need to
figure out a solution to get the list of accessible projects for a particluar user using PSI. I did find this technet article that addresses my issue in a way
http : // technet . microsoft . com/en-us/office/ee862408(v=office.14).aspx#pj2007_ta_SecurityInReports_DevelopingThePsiProxiesClassLibrary
the above solution means that I need to change many of my existing report queries (going to published DB)
Is there a simpler way to maintain a table that I can populate with the Project GUID's, name , user id, name using PSI? I can then refer the existing SQL's procs, TVF's to point to this table instaed of going to the published DB (unsupported method)
Any help/ direction is greatly appreciated
thanks,
SG

Hello,
The ReadProjectStatus PSI method defaults to Project for the Project Type, the value is 0. If you want other project types is gets slightly more complicated as you have to have multiple data sets for the ReadProjectStatus call, one for each project type
- each time specifying the default projType. For example for Projects (0) the query is:
<Query>
<Method Namespace="http://schemas.microsoft.com/office/project/server/webservices/Project/" Name="ReadProjectStatus">
<Parameters>
<Parameter Name="projType"><DefaultValue>0</DefaultValue></Parameter>
</Parameters>
</Method>
<SoapAction>http://schemas.microsoft.com/office/project/server/webservices/Project/ReadProjectStatus</SoapAction>
<ElementPath IgnoreNamespaces="true">ReadProjectStatusResponse/ReadProjectStatusResult/diffgram/ProjectDataSet/Project{PROJ_NAME,PROJ_UID,PROJ_TYPE}</ElementPath>
</Query>
For sub projects (5) it is:
<Query>
<Method Namespace="http://schemas.microsoft.com/office/project/server/webservices/Project/" Name="ReadProjectStatus">
<Parameters>
<Parameter Name="projType"><DefaultValue>5</DefaultValue></Parameter>
</Parameters>
</Method>
<SoapAction>http://schemas.microsoft.com/office/project/server/webservices/Project/ReadProjectStatus</SoapAction>
<ElementPath IgnoreNamespaces="true">ReadProjectStatusResponse/ReadProjectStatusResult/diffgram/ProjectDataSet/Project{PROJ_NAME,PROJ_UID,PROJ_TYPE}</ElementPath>
</Query>
You have to repeat this for all project types you want to include, create a hidden parameter for each project type then create a parameter to join them up and use the combined parameter to filter the data sets that get the data from the Reporting
database.
For other parameters in the ReadProjectStatus method see:
http://msdn.microsoft.com/en-us/library/gg210536(v=office.15).aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Lync 2013 Call Quality Reporting Time Intervals

Does anyone know the time interval used to report the metrics associated with the Lync 2013 call quality reports? If so, is there documentation that confirms that?
For example, Max Packet Loss Rate gives you a percentage. However, I haven't found any documentation that says how long a sample period is. Was that Max Packet Loss rate experienced for, at least, 1 second, 5 seconds, 30 seconds, 1 mintue etc?
I haven't found any conclusive information regarding how long of a period they may have experienced that max packet loss number, nor at what point during the call.
Thanks in advance for the help!

Hi,
The network health is expressed by the number of poor audio streams, where a poor stream is defined as having a packet loss rate over 1 percent and a maximum packet loss rate over 5 percent.
You can refer to the following two links to understand it easliy:
http://blogs.technet.com/b/jenstr/archive/2013/06/11/viewing-network-health-trends-using-qoe-data.aspx
http://blogs.technet.com/b/nexthop/archive/2012/12/10/troubleshooting-call-quality-locally-with-snooper.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error while Accessing SSRS reports From Sharepoint

We have recently implemented Kerberos authentication on SSRS web application in QA environment and experiencing some issues.
There are two Web Front End servers WFE1, WFE2
and one APP server in the environment. SSRS is configured in
WFE 2 Server.
When users browse SSRS reports from server WFE1, below error comes up, while report works fine from SSRS (WFE 2) server.
SSRS Error:
For more information about this error navigate to the report server on the local server machine, or enable remote errors.
Please provide us some assistance in troubleshooting/resolving this issue ( it’s became critical at this point).

The ULS logs are located on the Hive/14 file servers. The error message you encountered should have given a guid error message. If you search for this within the logs, can you copy the messages here for communal feedback.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Lync 2013 Crashes When Transferring From Response Group

Hello,
Seeing a very strange issue on a couple of our clients running Lync 2013. Whenever they transfer a call from their response group Lync will crash. Calls into their direct line will transfer just fine. Here are two of the event logs we have
seen from this.
Faulting application name: lync.exe, version: 15.0.4569.1503, time stamp: 0x52b0bd5c
Faulting module name: mso.dll, version: 15.0.4569.1506, time stamp: 0x52e0dcca
Exception code: 0xc0000005
Fault offset: 0x0000000001828520
Faulting process id: 0x1550
Faulting application start time: 0x01cf4766655f5ead
Faulting application path: C:\Program Files\Microsoft Office\Office15\lync.exe
Faulting module path: C:\Program Files\Common Files\Microsoft Shared\Office15\mso.dll
Report Id: cbd75420-b38c-11e3-ae5c-0026b9dd72ee
Faulting application name: lync.exe, version: 15.0.4569.1503, time stamp: 0x52b0bd5c
Faulting module name: LyncDesktopViewModel.dll, version: 15.0.4569.1503, time stamp: 0x52b0c3a2
Exception code: 0xc0000005
Fault offset: 0x0000000000119795
Faulting process id: 0xee0
Faulting application start time: 0x01cf4757f9b12418
Faulting application path: C:\Program Files\Microsoft Office\Office15\lync.exe
Faulting module path: C:\Program Files\Microsoft Office\Office15\LyncDesktopViewModel.dll
Report Id: 9db0d18d-b359-11e3-ae5c-0026b9dd72ee
We have tried a number of things this to get this working, but nothing has worked.
Installed Office 2013 SP1
Completely re imaged the client's computers
Deployed new Polycom Lync phones
Completely removed clients from their response group and the Lync server and added them back
I'm not sure where to go from here or what might be causing this. I would appreciate any thoughts you might have. Thank you!

By default, calls from Response Groups ignore call forwarding or simultaneous ring settings.
Lisa Zheng
TechNet Community Support

Creating Custom BI Reports from Oracle Agile PLM

Hi All,
Firstly apologies if this post is in the wrong forum, I struggling to find any real Oracle Agile Support.
I have been tasked with developing 3 custom BI reports for Oracle Agile. I have used BI Publisher in the past but only within Oracle E-Business Suite. From what I have seen so far Oracle Agile is a lot different.
What I need to understand is within Oracle Agile how do I create the XML Data file for the custom report, and then how do you then register the RTF template and run the report within Oracle Agile PLM.
Any help would be really appreciated.
Regards
Pete

Hi,
To develop custom report there are many way's. To discuss more Please send your contact details at [email protected]
Swayam Sevak.

Lync 2013 click to call from Outlook 2013 does not have the option for Lync call

Hello,
We are currently migrating from OCS 2007 r2 to Lync 2013. We are on office 365, but Lync is on premise. After migrating several users the option in Outlook to click to call someone only shows one option, which is to call the person's desk phone. Before there
was a dropdown where you could choose desk phone, mobile or Lync call. This issue isn't happening to everyone. We are using Office 2013 and Office 2010. Please let me know if you have suggestions or if you need more info.
Not sure if this is related, but some people have lost the option to view their contact's pictures.
Thank you in advance,
Mitch

Hi,
Please see the image below, are we talking about this?
If a contact doesn't have a phone number, we surely can't call him.
You can try updating the Offline Address Book to see the result:
http://www.howto-outlook.com/howto/oabupdate.htm
If I got anything wrong, feel free to post back.
Regards,
Melon Chen
TechNet Community Support

Lync 2013 custom meeting requests and the CustomFooterText attribute

Hi there,
I've been playing around custom meeting requests in Lync 2013. I need to automatically add some lines of text for a Lync Meeting request, and have been using the CustomFooterText attribute. Unfortunately, this doesn't seem to support carriage return
so all the text is dumped onto one line... and looks very messy.
I've read on one of the posts, that this field supports HTML, and have tried pasting in some HTML codes, but it's still rendered as text in Outlook.
The only way I've managed to do this is to save the desired output as an image, upload it to a web server, and use the -LogoURL switch instead, which essentially inserts a graphic... not ideal, but works.
Does anyone know of a way to insert carriage returns into the CustomFooterText?
Regards, James.
James Frost

Hi James,
I did some research and testing but found no way to add a carriage return to have this text respect the formatting as entered.
Best regards,
Eric

Reverse engineer custom Z reports from SAP in ODI

Hi all
We are in the process of integrating SAP to ODI. While reverse engineering, I can see only the SAP tables in the Metadata browser. Is it possible to reverse engineer the custom Z reports created by the customer? These reports typically access multiple tables.
Thanks
Sid

Did someone answer your question?

Ssrs report from ssas cube , driving me nuts now...

hi folks:
This is driving me nuts and I know it's gonna be some small stupid settings. The question is pretty simple, I want to users to be able to pick up a week from date hierarchy. If I specify a static week, mdx query will run and report shows with
correct data and format.
Now, in the dataset I've created using query designer, I've dragged data hierarchy into the filter and check the parameter box and also put a default value as well. Technically, when I run this report, I am supposed to see a dropdown list with all
the available dates but I did not see any dropdownlist and report still runs with default value.
Why is this happening?
Thanks
Hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Hi Hui,
Just as Gnanadurai said, a report auto runs when all parameters has their own default values. This scenario can also be occurred when there are no available values for the parameters. So if you want to see a drop-down list with all available dates when the
report runs, we should specify some available values for the parameter. For example, we can specify the available values come from a dataset field. Then the values in the field would be displayed in the drop-down list, we can select some of them to filter
the report.
Reference:
Adding Parameters to Select Multiple Values in a List (SSRS)
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Issues using HTTP Connection Manager to run SSRS reports from SSIS

In my package, I have a HTTP Connection Manager called "ReportServer". And I have two variables called "ReportURL" and "ReportFile". "ReportURL" is the URL for the report. I won't get into the details of this
URL because I don't think this is the issue. "ReportFile" is the complete path and name of the output file I want to generate from "ReportURL".
With these things in place, I have a script component that that looks like this.
Public Sub Main()
'Connect to http conn mgr
Dim httpConn As ConnectionManager = Dts.Connections("ReportServer")
Dim clientConn As HttpClientConnection = New HttpClientConnection(httpConn.AcquireConnection(Nothing))
'file name with path
Dim ReportFile As String = Dts.Variables("ReportFile").Value.ToString
'report url
Dim ReportURL As String = Dts.Variables("ReportURL").Value.ToString
clientConn.ServerURL = ReportURL
'Download PDFReport
clientConn.DownloadFile(ReportFile, True)
Dts.TaskResult = ScriptResults.Success
End Sub
I don't know too much about the inner workings of the above script. It's from a template I copied from somewhere and it's been working fine.
But, today all of a sudden, it started a mysterious behavior. Let me see if I can describe it to see if this sounds familiar to anyone.
For some reason, a run of this package failed at time T1, running with a certain value of "ReportURL" and "ReportFile". Now everytime I try to fun the package with the same "ReportURL" and "ReportFile", it fails because
it tries to write out two files with the same name, "ReportFile", one from the current one and another from the failed one at time T1. It looks like somehow, the connection is still open from the failed one in time T1 and it won't go away.... does
this sound like anything? Can you understand the problem I am describing?

May it be that this post is NOT SSIS related?
Arthur My Blog

SSRS reports from Lightswitch Html Client

I have created a Lightswitch desktop application that list the available reports that are stored in a table and also provides a button that when clicked launches the web browser to the URL for the report on the SQL server. My problem is now I'm trying to
create the HTML client for the application and have no experience with Java Script. Does anyone know how to accomplish the something that I did on the desktop application on the HTML client?
Below is the code that I used to open the URL in the browser in the desktop application.
Imports Microsoft.LightSwitch.Threading
Imports System.Runtime.InteropServices.Automation
Namespace LightSwitchApplication
Public Class ListReports
Private Sub RunReport_Execute()
' Write your code here.
Dim uri As New Uri(ReportsSet.SelectedItem.ReportAddress) 'website stored in the ReportsSet.ReportAddress field
If (AutomationFactory.IsAvailable) Then
Dim shell = AutomationFactory.CreateObject("Shell.Application")
shell.ShellExecute(uri.ToString)
ElseIf (Not System.Windows.Application.Current.IsRunningOutOfBrowser) Then
System.Windows.Browser.HtmlPage.Window.Navigate(uri, "_blank")
End If
End Sub
End Class
End Namespace

This may help:
Creating Reports in LightSwitch HTML Client
// Show Loading message
var LoadingDiv = $("<div></div>");
var Loading = $("<h1>    Loading Report...</h1>");
Loading.appendTo(LoadingDiv);
LoadingDiv.appendTo($(element));
// Get Report
var HTMLContent = $("<div></div>").html(
"<object width='650px' height='650px' data='../reports/ReportViewer.aspx?SurveyId="
+ contentItem.screen.SurveyId + "'/>"
// Make report appear on top of the Loading message
HTMLContent.css({
"margin-top": "-50px"
HTMLContent.appendTo($(element));
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

Can't find object ReportExecutionService when trying to execute SSRS report from C#/SSIS script task

I'm trying to work through the code sample at
http://msdn.microsoft.com/en-us/library/reportexecution2005.reportexecutionservice.render(v=sql.105).aspx but can't find the ReportExecutionService class. At first I tried to add a reference to a .NET namespace and it turned out that I needed
to add a service reference. I thought I was in the clear. Then I realized that I needed to include the namespace MyProjectName.ReportExecutionService_MyUniqueName, which was a namespace/class genereated by Visual Studio when I added the web service
reference.
Ok, so now I'm trying to find the class MyProjectName.ReportExecutionService_MyUniqueName.ReportExecutionService, just like the first line in the Main() method of the code sample. However, the class is not found. Intellisense (and error messages
when compiling) show that only a class called ReportExecutionServiceSoap and ReportExecutionServiceSoapChannel exist. I can't find any references to those in any MSDN samples and the structures of the classes don't seem to be the same (at least according
to Intellisense).
The project is set to compile for .NET 3.5.
Can anyone explain why I can't see the ReportExecutionService class or what my alternatives are?
Thanks!

Found out that there's a difference between adding a Service Reference and a Web Reference. In VS right click on References, Add Service Reference, then at the bottom there's an Advanced button. At the bottom of the next form there's a Add
Web Reference button. Use that instead of Service Reference.

SSRS reports inside SPO 2013 - Question about ADFS

Our SPO 2013 Tenant is secured by ADFS Claims Based.
I understand SSRS integrated is not available for SPO 2013.
We want to allow links from SPO 2013 to SSRS Reports that authenticate with the same ADFS tokens - so no prompting.
Possible? If so, what do we need?
Possible to provision the SSRS server in ADFS? What versions of SSRS will allow this?

Well, should we move this to the Power Query forum and try it there?
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Lync 2013 custom SSRS reports from CDR

Similar Messages

Maybe you are looking for