Unable to process the user defined Dimensions

Dear Experts,
When i am Create User defined Dimension and i fill the Dimension Members after this i am Processing the Dimension at that time i am getting the following errors.
Exception error has occured;check the log id=122 for more details
Call was rejected by callee.(Exception from hresult:0x80010001(rpc_e_call_rejected))
Could you please help me how to Solve this issue.
Thanks in Advance,
Regards,
Srinivasan.

Hi Srini,
Please check your log table in Appserver database.
Please check your log file in the Server with the ID.
The log file will have clear details of the errors faced.
Hope this helps.
Karthik AJ

Similar Messages

Numbers assigned to user defined dimensions

Dear Experts
I have created application set from APPSHELL and created three user defined dimensions viz., A, B and C
Then removed all not required dimensions including 'P_ACTIVITY' which was a User defined dimension.
System has assigned numbers as U4, U8 and U9 to these dimensions on its own (I do not know what is the logic system is following to assign numbers to these dimensions)
Questions:
1. What is the logic system is following for assignment of the numbers to User defined dimensions?
2. Can I change these numbers to U1, U2 and U3 (for ease in ad-hoc reporting). If YES how can I do that?
Thanks

Hi,
The userdefined dimensions are named Sequentially as they are created and these are not constant for them, the same dimension may have different names in different applications.
Also the user defined dimensions are named as Ua to Ux in NW.
For example, in App1 some dimension X may be named as Uc, the same dimension X in App2 may be named as Ud or some other.
We need to manually work betweeen "a to x" with the below macro to find the exact name for the user defined dimension in the application.
"MNU_eTOOLS_MEMBERSELECTOR_X"
Eg:
MNU_eTOOLS_MEMBERSELECTOR_Ua
Also as suggested in earlier replies i dont think this naming can be changed.
Hope this helps,
Regards,
G.Vijaya Kumar

User defined dimensions in planning

hi all can any one tell me where are the user defined dimensions in planning are stored in the backend realtional tables ? I am learning about the worlkflow of the backend tables and how will they react to any changes that are made in the front end. I got the tables where pre defined dimensions are stored but i created a dimension called "CUSTOM" and checked it in the HSP_OBLECT, HSP_DIMENSION tables but did not find it. Can any one tell me whats actually going on in the backend ??
thanks in advance,
Ranjith Kumar. P

You can find the dimension name in HPS_Object under Object_Name column and for the dimension Id you can check HSP_Dimension.
Something like:
Select Object_Name from HSP_OBJECT WHERE (Object_ID in (Select Dim_ID from HSP_Dimension))
and just for finding the object_id of dimension name "Custom":
Select * from HSP_OBJECT where Object_Name like 'Custom'
Here is more information on all the relational data-models:
http://docs.oracle.com/cd/E17236_01/epm.1112/epm_data_models_1112200.zip
Cheers..!!
Rahul S.

Need help: unable to change user defined dimension

Hi,
I have a problem with BPC. I installed BPC Server and BPC Client NW7.5 SP9. I can duplicate, create and modify all standard dimensions (Account, Category, Entity, Time) in my own application as also in appshell.
I can duplicate or create a user defined dimension, but I cannot modify that user defined dimension. I change the elements, then I process my changes. But after I have refreshed the dimension all changes are reverted.
I looked in UJFS and can see that .xls and .xlt are uploaded on NW correctly. Even on my local machine it is changed, but BPC does not recognize that.
Has anyone an idea what to do? I need not only the standard dimensions but also user defined dimensions.
Regards

We've got this problem on non-unicode system on SP08, as Frank. Corrected with SP09.
Maybe you have to check if all components patched well (NW, .Net and client):
- In NW Go to System-Status-Component Information. CPMBPC must have level 0009.
- On .Net Server check Server Version in Planning and Consolidation Server utility (.09)
- In client for Excel check ETools-About Planning and Consolidation (7.50.09).
If that's correct, first check, if new records occur in BW object for your dimension (in rsa1). Or maybe that info-object somehow become inactive.
And did you mark checkbox "Process members from member shett" during processing the dimension?
Edited by: Anton Kuznetsov on Oct 26, 2011 4:43 PM

User Defined Dimension

I am getting the following Error (when I try to Process members for an user defined dimension)
""Object reference not set to an instance of an object.""
I am creating the following User Definied Dimension : Dept
Deptname           25
Deptno                10
Evedescription     50
Scaling                  2
ID............     NEWID.....EVDESCRIPTION.......PARENTH1 ...SCALING     Deptno     ....Deptname
dept .........................accounts............................... .......                    ..........         10     ....      a
computers.................computer............... ....      dept     ...............................      20...           b
accounts     ............     accounting        ........ ............   dept..........      ........................            30.....           c
What am I doing wrong? Please help me. Thanks.
YV
Edited by: Yedi Viladin on May 14, 2009 3:20 AM

Hi,
This is a very generic Error.
u2022You can try re-booting the server.
u2022Prior to re-boot log-in to the server and verify that the +COM objects are working or all started
u2022You may also get this error if a dimension has not processed, which means the application is not processed
u2022Another problem that can cause this problem is that the password for the installation user has been changed or that the installation user is locked out.
u2022Do you see error in BPC Server Manager -> Diagnostic?
There are several SAP Notes also available for this Error u2013 1246092, 1223846
Regards,
Ankita

How to Manage index of user define dimensions

When I create a new rate application,The BPC system throw the message"Index was out of range:must be non-negative and less than the size of the collection parameter name :Index".
I searched oss notes:1323195 saying :"A user can change the index of user-defined dimensions by clicking a button named "Manage Index" in "Modify application". The button will be shown if**
*there are user-defined dimensions already assigned to an application or at*
*the moment of assigning a user-defined. If the button is clicked a windows*
*will popup, and the user can maintain a user-defined dimension index from*
*the window."*
But i can't find the menu "manage index" .
could someone tell me how to find it?
thanks

Just go trough Manage application and Modify application and use reindex and full process.
This normally should fix your issue.
Regards
Sorin Radulescu

The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?

Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33

"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz

Maximum number of User defined dimensions in Planning v11.1.2

Hi guys,
I am new to Hyperion Planning version 11.1.2, just wanted to clarify what is the maximum number of User defined dimensions that can be added in a planning application.
I've also learnt that the number of Alias tables is more than the previous versions. What is the maximum number of Alias tables in Planning version 11.1.2 ?
Regards.

Maximum number of alias tables is 10 including the default alias table
As for custom dimensions then I wouldn't expect you to hit a maximum unless you want to design a planning application destined to fail.
Cheers
John
http://john-goodwin.blogspot.com/

RICS0001:Internal Error,unable to process the collected data from the device.

Hi all,
I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
System is CW LMS 2.6
If I search the web I get the following Cisco document:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
'...in the log directory look for IC_Server.log.'
IC_Server.log:
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
[ Di Nov 16 15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
Thanks for your help!
Alex

Well known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).

PROMPT(SELECTINPUT, ...) and user defined dimensions

Hi,
I created a custom package that should enable the user to select members of the TIME, Account and Category dimensions and also members of some user defined dimension called "Costcent". After that, a scriptlogic file should be called.
I tried:
1)
PROMPT(SELECTINPUT, ... %TIME_DIM%%ACCOUNT_DIM%%CATEGORY_DIM%"Costcenter")
which doesn't work, bc. compiler doesnt seem to like %var%"fixedexpression"
2)
PROMPT(SELECTINPUT, ... "Costcenter")
PROMPT(SELECTINPUT, ... %TIME_DIM%%ACCOUNT_DIM%%CATEGORY_DIM%)
running the package only allows to select a costcenter, 2nd prompt ignored?
3) similar, the other way round.
Any ideas?
Moreover, I need to be able to access the selection of the Costcenter members in the script logic. For the std. dimensions, there is %TIME_SET%, %CATEGORY_SET% etc.I am using successfully, but how to define or access the set (or list) for the selected members of user-def. "CostCent" dimension ?
Thanks for your help!

Clear Bug: Using the DataManager to modify the .dtsx file sometimes modifies the prompt lines in an unpredictable way... So the file that is safed doesn't get the content it is intended to get... - Guess "this should never happen", but it is...

LMS 4.2.4 Error RICS0001:Internal Error,unable to process the collected data from the device.

Hi
LMS 4.2.4 inventory collection fails with Error RICS0001:Internal Error,unable to process the collected data from the device for few devices.
Can anyone help me out.
Regards
Laxmi

They are definately supported. However such issues are usually due to device packages, if unavailable or not installed.
Please do following :
1. Check Admin > software centre > device updates and check any devices packages available in Cisco.com and install it and recheck.
2. Please do a snmpwalk on problematic device on sysObjectID and share result. Following is the way to do snmpwalk :
GUI - Open the device in Device Centre (Inventory > Tools > Device Center) and open the device with IP and from tools select snmpwalk and do it for sysObjectID (1.3.6.1.2.1.1.2)
CLI : CD to NMSROOT/objects/jt/bin from command prompt. run command as per following syntax:
snmpwalk -v2c -c <snmp_community_string> 1.3.6.1.2.1.1.2
Example :
community string = test123
IP = 10.1.1.1
snmpwalk -v2c -c test123 10.1.1.1 1.3.6.1.2.1.1.2
3. Please check your device package, by clicking on the number of packages in front of Inventory, conifg and image management from :
Admin > System > Software Center > Device Update
Also, check device identity under edit identity option from :
Inventory > Device Administration > Add / Import / Manage Devices
Check my screenshots for details :
Please check and share results.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

I've usd RecMyFile to recover .JSON file but I get "Unable to process the backup file" be like Unknown format

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/887204]]</blockquote>
I've usd RecMyFile to recover .JSON file but I get "Unable to process the backup file" be like Unknown format
like this > http://goo.gl/pHTkr < Please help me Please

All worked very well - this is a good solution. The key was finding the Profiles in my Users folder.

Difference between UDA & User-Defined Dimension

Hi all,
I need to know what the difference between UDA and User-Defined Dimension and when can i use each one??
thanks in advance

UDAs are descriptive words that you can use to categories members of a dimension.
http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/uda_tab.html
Using UDA, For ex: in Customer Dim you can divide customers into CAT A, B or C and then can use these UDAs in calc scripts, query them later in reports etc.
User defined Dimension: Is any new dimension that you add to planning application apart from default ones.
http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch10s04s09.html

Unable to process the user defined Dimensions

Similar Messages

Maybe you are looking for