Unable to Query Table
Hi Folks,
I'm stuck in weird situation. User complaints fetching data from table A is timing-out ( as per application standards). I decided to collect latest statistics(dbms_stats) on index used by query which is running for more than 12 hours. Ideally which should not.It is partition table and got close to 10 millions records.
1) I checked dba_waiters - no rows
2) I checked v$locked_object/v$locks - no rows
3) I'm unable to run explain-plan for any criteria on that table
4) I'm unable to open table data-tab in Toad/ Sql developer.
5) I'm unable to query a single partition; no error but it keeps on running.
SQL> SELECT * FROM SSAM_TRANS_FACT PARTITION (P20101010S01);
Again, anything in alert.log? Any trace files? What happens if you issue:
select 1 from ssam_trans_fact where rownum = 1;What happens when you issue:
select 1 from ssam_trans_fact partition(P20101010S01) where rownum = 1;SY.
Similar Messages
-
Frm- 40505 Unable to query (table does not exist)
Hey,
I have a form which has two blocks that are master and detail blocks. On the form, there are 3 fields that allow the query. If there is record found in the master then it works fine. If nothing found, it shows "query causes no records" which is also fine. But afterwards, no matter what I type in to query, it always show frm-40505. Oracle error, unable to perform query. I click "display error", it shows:
SELECT ROWID,LOC,INV_NUMBER,RECNO,FACTOR,C_DESC,ADJ_TYPE,CODE,AMT FROM OE_INVOICE_ADJ
WHERE (LOC=:1) and (INV_NUMBER=:2) order by recno
frm - 09402:Table or view does not exist.
Here oe_invoice_adj is the detail table and it does exist. If I stop the form and run it again then it's fine. It only happens after "query causes no records".
Any ideas? thanks a lot in advance.Jay, Have you created public synonym for the tables so that the users don't have to refer the tables with the schema scott.xtable...
and have the users been given the SELECT privilege to those tables....
mb
I actually created the tables and views for my application by logging in as scott/tiger.Now the users I have created with due privileges are just able to log in but unable to perform any query or DML.The error message is FRM 40505'UNABLE TO PERFORM QUERY' which says table or view does not exist.How do I fix this problem?
Please get me a solution
Thanks
Jay -
Unable to Query Table Created Via Load/Unload Utility
I just created a table by doing a data load of an tab-delimited file via the Load/Upload Utility. The table was successfully created, and I can view it on the Object Browser, but I cannot do SQL queries on it, either via SQL*Plus or via the SQL Commands page. What's going on?
I got no error message at all from Firefox when I did the data Load, so it took me
a while to suspect that the browser compatibility was at fault.Moreover, you posted in your first post in this thread that you saw table in Object Browser!
Sounds as APEX bug to me... -
Unable to view table list in sql developer
I am able to connect to the database through sql developer but unable to view tables list.
Select query is displaying the contents though.
Any Help ???Using SQL Developer, I log in using the owner user id and password. I can see all but one of my materialized views. It was definitely created by the user id I'm logged in as. A query of user_objects in sql+ shows all MVs, including the one that's missing in SQL Developer. If I log in using the same credentials in TOAD, the MV is displayed in the current schema, as I'd expect. The super weird thing is that if I use the previous version of SQL Developer, I see that MV! Any thoughts?
Edited by: [email protected] on Feb 25, 2009 9:19 AM -
Unable to extend table SYS.yyy_xx1$ by 8192 in tablespace SYSTEM
While trying to compile a package with lots of objects i am getting the below error message.
Oracle 11gr2
ORA-00604: error occurred at recursive SQL level 1
ORA-01653: unable to extend table SYS.yyy_xx1$ by 8192 in tablespace SYSTEM
00604. 00000 - "error occurred at recursive SQL level %s"
*Cause: An error occurred while processing a recursive SQL statement
(a statement applying to internal dictionary tables).
*Action: If the situation described in the next error on the stack
can be corrected, do so; otherwise contact Oracle Support.
How can i resolve the issueResult of query
select -- file_name
blocks
, maxblocks
, status
, autoextensible
from dba_data_files
where tablespace_name = 'SYSTEM';
4194302
4194302
AVAILABLE
YES
4194302
4194302
AVAILABLE
YES
4194302
4194302
AVAILABLE
YES
262144
0
AVAILABLE
NO
524288
0
AVAILABLE
NO
524288
0
AVAILABLE
NO
524288
0
AVAILABLE
NO
524288
0
AVAILABLE
NO
524288
524288
AVAILABLE
YES
524288
524288
AVAILABLE
YES
518400
524288
AVAILABLE
YES
517120
524288
AVAILABLE
YES
655360
0
AVAILABLE
NO
655360
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO -
Hi,
I have taken export backup of table from 9.2.0.4 on AIX & trying to import in 11.1.0.7.0 on AIX
while importing im getting the following error.
ORA-01653: unable to extend table CUSTOM.CASA_TRAN_HIST_UPLD by 699912 in tablespace CUSTOM
As the table size is 37G , total free space in tablespace is 40G,
& no index on the table.
following are sum lines from import file
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V09.02.00 via direct path
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
. importing DATAMIG's objects into CUSTOM
. . importing table "CASA_TRAN_HIST_UPLD"
IMP-00058: ORACLE error 1653 encountered
ORA-01653: unable to extend table CUSTOM.CASA_TRAN_HIST_UPLD by 699912 in tablespace CUSTOM
IMP-00028: partial import of previous table rolled back: 62844421 rows rolled back
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT SELECT ON "CASA_TRAN_HIST_UPLD" TO "BSGUSER""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'BSGUSER' does not exist
Import terminated successfully with warnings.
is there any to resolve the issue.
how to change NCHAR set for import.
ThanksHello,
which & how i can set character set for import.About the Character Set, it's a setting at the Database creation. You may check it by using the following query on the Source and Target Databases:
select * from v$nls_parameters; The NLS_CHARACTERSET will give you the Character set of the Database.
It cannot be changed easily. It may imply a Database creation and export/import of data ( see Note *225912.1* ).
Else, when you export (with the Original Export/Import utility) it's recommended to set the NLS_LANG parameter.
The NLS_LANG parameter has 3 components:
- Language
- Territory
- Client Character Set
A wrong setting of the NLS_LANG may lead to conversion. However starting with *9i* most data is exported with the Character Set of the Database regardless the NLS_LANG setting. The following note may give you some details about it:
Export/Import and NLS Considerations [ID 15095.1]Hope this help.
Best regards,
Jean-Valentin -
Hello everybody,
I try to explain the problem I had, because I still didn't understand real causes.
Everything started when I got this error:
ORA-01653: unable to extend table DISPATCH.T_EVENT_DATA by 4096 in tablespace USERS
I'm using ASM.
This was the situation of the tablespace USER:
FILE NAME TB NAME SIZE (gb) STATUS
DATA/evodb/datafile/users.261.662113927 USERS 63,999969482421875 AVAILABLE
and this was the situation of the DATAS diskgroup:
GR # NAME FREE_MB USABLE STATE SECTOR SIZE BLOCKSIZE
2 DATA 60000 60000 MOUNTED 512 4096
That diskgroup is composed by 5 files:
PATH DISK# GR NAME FREE MB OS MB TOTAL MB NAME FAILGROUP
/dev/asm2 0 DATA 12000 48127 48127 DATA_0000 DATA_0000
/dev/asm3 1 DATA 12000 48127 48127 DATA_0001 DATA_0001
/dev/asm4 2 DATA 12000 48127 48127 DATA_0002 DATA_0002
/dev/asm5 3 DATA 12000 48127 48127 DATA_0003 DATA_0003
/dev/asm6 4 DATA 12000 48127 48127 DATA_0004 DATA_0004
This are the information about the table got from the dba_tables table:
OWNER DISPATCH
TABLE_NAME T_EVENT_DATA
TABLESPACE_NAME USERS
CLUSTER_NAME
IOT_NAME
STATUS VALID
PCT_FREE 10
PCT_USED
INI_TRANS 1
MAX_TRANS 255
INITIAL_EXTENT 4294967296
NEXT_EXTENT
MIN_EXTENTS 1
MAX_EXTENTS 2147483645
PCT_INCREASE
FREELISTS
FREELIST_GROUPS
LOGGING YES
BACKED_UP N
NUM_ROWS 532239723
BLOCKS 1370957
EMPTY_BLOCKS 0
AVG_SPACE 0
CHAIN_CNT 0
AVG_ROW_LEN 32
AVG_SPACE_FREELIST_BLOCKS 0
NUM_FREELIST_BLOCKS 0
DEGREE 1
INSTANCES 1
CACHE N
TABLE_LOCK ENABLED
SAMPLE_SIZE 532239723
LAST_ANALYZED 21/09/2009 22.45
PARTITIONED NO
IOT_TYPE
TEMPORARY N
SECONDARY N
NESTED NO
BUFFER_POOL DEFAULT
ROW_MOVEMENT DISABLED
GLOBAL_STATS YES
USER_STATS NO
DURATION
SKIP_CORRUPT DISABLED
MONITORING YES
CLUSTER_OWNER
DEPENDENCIES DISABLED
COMPRESSION DISABLED
COMPRESS_FOR
DROPPED NO
READ_ONLY NO
So, my question is:
Why did it happen?
Why the table was unable to allocate the space? From what I can see the space was there.
I alstro tried an ALTER TABLESPACE USER COALESCE, but with no luck.
To solve the problem, I had to create another tablespace and put there the T_EVENT_DATA table.
Looking forward to read some answer,
thanks in advance!There can be two reasons:
1.) Datafile is unable to extend as the auto-extend is set to NO.
2.) Datafile reached to the MAXSIZE provided at the datafile creation.
Query dba_data_files view and confirm this.
Regards. -
Hi,
In the alert log file it is occuring below error on some interval.The database version is 10.2.0.4.0.
ORA-1688: unable to extend table SYS.WRH$_ACTIVE_SESSION_HISTORY partition WRH$_
ACTIVE_506486335_9939 by 128 in tablespace SYSAUX
Thanks,
Quadri
Edited by: Quadri on Feb 6, 2010 6:52 AMHello,
You wrote:
Can i delete some rows to release the space from the SYS.WRH$_ACTIVE_SESSION_HISTORY table?To purge the Table SYS.WRH$_ACTIVE_SESSION_HISTORY, you may first query the Snapshot History
with the query below:
select snap_id, begin_interval_time from sys.dba_hist_snapshot order by snap_id;Then, you choose the range of snapshot you want to delete, and you execute the following Procedure:
exec dbms_workload_repository.drop_snapshot_range ( low_snap_id => snap_id_1, high_snap_id=> snap_id_2 );But, if the delete will free space inside the Table, it won't release space to the SYSAUX Tablespace.
You wrote:
For system tablespace can i add or resize the datafile if it needs?Yes as any Tablespace. But your error message was on the Tablespace SYSAUX. So this is the reason why it
was not necessary to extend the Tablespace SYSTEM.
Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Feb 6, 2010 6:33 PM -
REG:ORA-01653: unable to extend table SYS.OBJ$ by 128 in tablespace SYSTEM
Hi
My database is
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
I get the following error
ORA-00604: error occurred at recursive SQL level 1 ORA-01653: unable to extend table SYS.OBJ$ by 128 in tablespace SYSTEM
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-01653: unable to extend table SYS.OBJ$ by 128 in tablespace SYSTEM
When query the dba_data_files system tablespace
TABLESPACE_NAME AUTOEXTENSIBLE FILE_NAME MAXBYTES/1024/1024/1024 BYTES/1024/1024/1024 SYSTEM YES DATA/maq1/datafile/system.260.709848331 31.9999847412109375 0.65447998046875 SYSTEM NO DATA200/maq1/datafile/system.310.729819887 0 0.9765625
2 rows selected
Please adviceHello,
ORA-00604: error occurred at recursive SQL level 1 ORA-01653: unable to extend table SYS.OBJ$ by 128 in tablespace SYSTEM
TABLESPACE_NAME AUTOEXTENSIBLE FILE_NAME MAXBYTES/1024/1024/1024 BYTES/1024/1024/1024
SYSTEM YES +DATA/maq1/datafile/system.260.709848331 31.9999847412109375 0.65447998046875
SYSTEM NO +DATA200/maq1/datafile/system.310.729819887 0 0.9765625
If you have enough space on the Disk for the first Datafile to extend, it's a rather strange behaviour.
In this case, I suggest you to open a SR on My Oracle Support.
On Solaris, a similar bug was reported (in 9.2.0.8 release):
Bug 7196775: ERROR ORA-01653 OCCURS WHILE INSERTING RECORDS IN TABLE WITH DATAFILE AUTOEXTENDElse, you may try to extend manually the Datafiles so as to get enough free space inside the Tablespace SYSTEM.
Hope this help.
Best regards,
Jean-Valentin -
ORA-01653: unable to extend table SYS.ARGUMENT$ by 13 in tablespace SYSTEM
I have created new database manually.
when I am @?/rdbms/admin/catproc.sql putting this sql to run.
for sometime it says created, granted. but after some part it give me the error.
ORA-01653: unable to extend table SYS.ARGUMENT$ by 13 in tablespace SYSTEM
Please help me on this.
Thank you in advance.Your query does not provide SYSTEM tablespace size. It provides list of tablespaces. And it can't be a complete list since I do not see UNDO and TEMP tablespaces. In any case, based on the output you did not create any user tablespaces, so all tables you are creating went to SYSTEM tablespace and eventually you ran out of space. You need to create user tablespaces if you do not have any. You need to change non-system users and set default tablespace to non-system tablespaces. Even if you do have non-system tablespaces, tables will be created in user default tablespace unless you explicitly specify one. You need to move existing user tables/indexes to non-system tablespaces.
SY.
P.S. In order to get SYSTEM tablespace size you need to run:
select sum(bytes)/1024/1024 tablespace_size_in_mb
from dba_data_files
where tablespace_name = 'SYSTEM'; -
I am able to connect to the database through sql developer but unable to view tables list.
Select query is displaying the contents though.
Any Help ???I am on Windows XP using SQLDeveloper Build 5440 and I am having a similar problem (I think).
I am able to connect to the database, I am able to see a list of all the tables (as the owner) in the tree but i can not see anything under columns and am shown 5 all null rows under data. I am able to view statistics, DDL and I can query the table with a select and get results. I have tried reverting to an older versin of SQLDeveloper but that gave me the same result.
If this is the same problem then I am having it too. Any help would be appreciated. Thanks in advance.
Greg -
Selecting from Materialized Query Tables (DB2 UDB database)
When selecting what objects I wish to view in my Reports, I am unable to see any Materialized Query Tables in the list. I am able to see the "normal" Tables and Views, just not any Materilized Query Tables.
Please let me know what I need to set or customize in-order to see and then select fields from these.Thanks everyone.
I was able to find the answer.
For the new report, in the "Create New Connections"...choose "OLE DB (ADO)" --> then "Microsoft OLE DB Providers for ODBC Drivers" --> click on the "Next" button --> choose the database --> then user/password details (..and so forth). -
Navigation block and the Query Table Side by side in output
Hi
I am unable to get the navigation block and the query table side by side when i execute the WAD .Is it possible to place those 2 objects next to each other in the WAD output.In the WAD design those 2 are placed side by side.
Regards,PraI meant Html Table:
In WAD in menu you can choose Insert -> Table -> Insert Table
You need 1 row, 2 columns. In one of the column you should put navigation block and in the other table.
Regards
Erwin
Edited by: Erwin Buda on Feb 5, 2009 2:06 PM -
Cannot query tables in remote database
Hi, I have looked around for similar topics but have not found anything that would be close to my problem. I created a public link to a remote database from my portal database, it is a public link and I can query tables in the remote database just fine when I am on the sqlplus prompt. When I try to create a report, or a dynamic page, it lets me go through the wizard steps ok, however when I run it as a portlet or just run it as a report/page it does not seem to be able to see the query. Below is the response I get from running it as a portal. I am logged in as portal30.
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from C2K (WWV-11230)
Failed to parse as PORTAL30_PUBLIC - select * from populate@c2k (WWV-08300)
The preference path does not exist:
ORACLE.WEBVIEW.PARAMETERS.1320061995 (WWC-51000)
The preference path does not exist:
ORACLE.WEBVIEW.PARAMETERS.1320061995 (WWC-51000)
Error: Unable to execute query (WWV-10201)
Please help, I have tried everything from public to private synonyms for the linked tables and it just does not work. I am using the most recent version of portal that came with ias 1.0.2.2.0Actually I solved my problem, it looks like I should have used the db link utility with the portal, I linked the databases on the sqlplus command line and it seems like that was the issue.
-
ORA-1653: unable to extend table APPLSYS.FND_ENV_CONTEXT by 16
Database version : 10.2.0.2
When a Query is executed from an Oracle Application Self Service Page , we are hitting the following exception from JDBC
## Detail 0 ##
java.sql.SQLException: ORA-21710: argument is expecting a valid memory address of an object
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:216)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:966)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1062)
When checking the alert.log we are getting different error
ORA-1653: unable to extend table APPLSYS.FND_ENV_CONTEXT by 16
The above error was not coming till June 1st. we are initially getting error
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","select count(*) from sys.job...","sql area","tmp")
Kindly advise whether this is known issue or a bug. Any Pointers to known issues of specific DBMS Versions.
Thanks
JosephFind the tablespace where APPLSYS.FND_ENV_CONTEXT and see if you can add space to it.
Maybe you are looking for
-
We are in Croatia and are having trouble getting help for our problem. We have an Ipad and an Iphone 4S. I have been using the Iphone as a camera. The icloud has been transferring pictures to the ipad. Now, my iphone is full of pictures (180) and
-
I just wanted to ask,Im getting rid of my ipod shuffle and hoping to sell it.How do i wipe off any personal details the the name of my ipod?(it said make a name and i wrote coolios ipod)how do i get rid of that and ready to sell? Thanks.
-
I had to set the settings on Google to Do Not Use Google Instant in their search settings as no cursor was showing on the google search box. After the change it seems that the Google logo and search box seems higher on the Firefox page. I would like
-
SLOW MDX Query in an Environment but Fast in another
A query runs slow in one environment but fast another : here's what I looked for so far without any luck. It takes 2 seconds to execute the query below in QA vs 20 seconds in prod. QA cube size is 430.81 MB - 474.54 MB on PROD Cubes match in environm
-
Where to find the SQL text in v$ views?
Hi All, Oracle 11.2.0.3 on RedHat. I am trying to find out SQL activity on my database for a very narrow time window. Please see the SQLs I did SQL> select distinct user_id, sql_id 2 from v$active_session_history 3 where sample_time between to_