Unable to read dependencies of an included VI.

Hey all.
I am trying to build an executable for a project that I have been working on.
When I tell it to build I get the following error.
Unable to read dependencies of an included VI. Open all Startup/Exported/Dynamically called VIs, recompile them (Ctrl-Shift Click the run arrow), and save them to update their dependencies.
C:\Documents and Settings\du402c\Desktop\XPDR\Working Folder\XPDR_GUI_SELECT.vi
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller in Charge.
I can't for the life o fme figure out what is wrong. Everything runs fine when I just run it, but I can't actually build it.
I have gone inot the main GUI and done the CTRL-SHIFT Run Arrow bit, and it hasn't changed anything.
Any suggestions?
Thanks.
Any suggestions?

Ok, ignore this.
I created a new project from scratch and it worked fine.

Similar Messages

Trying for 3 days to get Bridge to work. Told me to unable ti read cache -- tired everything including deleting and reloading -- still getting same message. Pl;ease help I am on a deadline. Bob

Bridge unable to read cache
Trying for 3 days to get Bridge to work. Told me to unable ti read cache -- tired everything including deleting and reloading -- still getting same message. Restarted computer several times as well. Please help I am on a deadline. Bob

THANKS FOR REPLY,
No, I am on a Mac OS X 20.9.4
BOB

Error: Unable to read footer file

Hoping someone out there can help me. I get this error on
everypage in my site and have no idea how to stop it.
Error: Unable to read footer file
The error does not show up when I preview inside dreamweaver
but only rears its ugly head after I post the site up on the
internet. I have searched for hours through the Dreamweaver menus
and can not find these elusive footers and have no idea where they
are coming from or what footer file it is trying to read.. Please
help. This probably has a simple solution and I am just not able to
understand it. Thank you.

sdrouillard wrote:
> This probably has a simple solution and I am just not
able to understand
> it.
Possibly, but without a URL we can't comment. Post it, and
we'll see.
At a guess, sounds like an include file is missing. Are you
on some sort of
free hosting plan where the host puts some adverts in the
footer? If that
file is removed from your site directory you might get the
error you've
mentioned (at least, that was the case on the only other time
I've seen this
error)
Regards,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a s

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a stalled/locked program. I have tried restarting my machine multiple times and tried reconfiguring how the cache is managed. Do you have anyone who could walk me through each step to correct this problem which just started two days ago. I have owned this program for at least a year now...

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not a

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)

Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences.

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

When opening Bridge I get this message: Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in the cache preferences to correct the situation. I have tried this and still get this message. when I delete image

When opening Bridge I get this message: Bridge encountered a problem and is unable to read the cash. Please try purging the central cache in the cache preferences to correct this problem. I did this and still get this same message.Also now when deleting images they don't delete till I close and reopen Bridge. What can i do to fix this problem?

Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences.

XML Encoding from Business One - Unable to Read in a 3rd Party APP

Hi:
I have created an Add-On app that produces an XML document file when a new item is created or an existing item is updated. However, the 3rd party app that I am trying to integrate into is unable to read this XML. After doing some research, the following appears to be the issue.
SBO produces the data with UTF-16 which is a double byte encoding for XML's. The 3rd party app that I have appears to be able to handle only single byte encoding formats such as UTF-8 or ISO-8859-1.
I would like to know if there is a way in SDK to convert the output XML format to a single byte encoding such as ISO-8859-1. Can anyone please tell me how to achieve that in my Add-On code?
Thank you.
Kushal Dutta

Hi Kushal,
You can use a XLST transformation to convert from UTF-16 to UTF-8.
The coding goes something like this:
XmlReader xmlRdr = XmlReader.Create(new StringReader(sXML));
XmlWriterSettings xmlWtrSettings = new XmlWriterSettings();
xmlWtrSettings.Encoding = Encoding.Unicode;
XmlWriter xmlWtr = XmlWriter.Create(sOutFile, xmlWtrSettings);
XslCompiledTransform xslt = new XslCompiledTransform();
xslt.Load(sTransformFile);
xslt.Transform(xmlRdr, xmlWtr);
xmlWtr.Flush();
xmlWtr.Close();
xmlRdr.Close();
Where sXML is the XML string generated by the SBO GetAsXML method, sOutFile is the path and filename where the transformed XML will be created and sTransformFile is the path of the XLST file.
Assuming that you wish to retain the same XML structure as before, the XLST file should look something like the following:
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
     <BOM>
          <xsl:for-each select="BOM/BO">
          <BO>
               <AdmInfo>
                    <Object>
                         <xsl:value-of select="AdmInfo/Object"/>
                    </Object>
               </AdmInfo>
               <ORDR>
                    <xsl:for-each select="ORDR/row">
                    <row>
                         <DocEntry>
                              <xsl:value-of select="DocEntry"/>
                         </DocEntry>
                         <DocNum>
                              <xsl:value-of select="DocNum"/>
                         </DocNum>
                         <DocDate>
                              <xsl:value-of select="DocDate"/>
                         </DocDate>
                         <DocDueDate>
                              <xsl:value-of select="DocDueDate"/>
                         </DocDueDate>
                         <DocStatus>
                              <xsl:value-of select="DocStatus"/>
                         </DocStatus>
                         <Cancelled>
                              <xsl:value-of select="CANCELED"/>
                         </Cancelled>
                         <CardCode>
                              <xsl:value-of select="CardCode"/>
                         </CardCode>
                         <CardName>
                              <xsl:value-of select="CardName"/>
                         </CardName>
                         <NumAtCard>
                              <xsl:value-of select="NumAtCard"/>
                         </NumAtCard>
                    </row>
                    </xsl:for-each>
               </ORDR>
               <RDR1>
                    <xsl:for-each select="RDR1/row">
                    <xsl:sort select="LineNum" />
                    <row>
                         <LineNum>
                              <xsl:value-of select="LineNum"/>
                         </LineNum>
                         <ItemCode>
                              <xsl:value-of select="ItemCode"/>
                         </ItemCode>
                         <Dscription>
                              <xsl:value-of select="Dscription"/>
                         </Dscription>
                         <Quantity>
                              <xsl:value-of select="Quantity"/>
                         </Quantity>
                         <WhsCode>
                              <xsl:value-of select="WhsCode"/>
                         </WhsCode>
                         <BaseType>
                              <xsl:value-of select="BaseType"/>
                         </BaseType>
                         <BaseEntry>
                              <xsl:value-of select="BaseEntry"/>
                         </BaseEntry>
                         <BaseLine>
                              <xsl:value-of select="BaseLine"/>
                         </BaseLine>
                         <FreeTxt>
                              <xsl:value-of select="FreeTxt"/>
                         </FreeTxt>
                    </row>
                    </xsl:for-each>
               </RDR1>
          </BO>
          </xsl:for-each>
     </BOM>
</xsl:template>
</xsl:stylesheet>
The above example shows a XLST transform for the sales order document type. This example is for use with the xet_ValidNodesOnly setting for the XmlExportType company property. If you are using a different XmlExportType setting then the XLST will be slightly different but the principal is the same. For simplicity, I have shown only a cut-down list of the fields from the sales order but other fields and tables can be included (assuming that they are in the original XML from SBO).
Kind Regards,
Owen
P.S. Sorry for the lack of indentation on the XML file. It was there when I created this post but the forum removes the indentation.

OBIEE Writeback error - The system is unable to read the Write Back Templat

Hi all,
I'm trying to set up the write back feature for one of the reports. All the set up up including XML file in the custommessage folder is done.Ensured the webmessage name tag value (pmet_update) is same as the one used in the report write back template value etc.
Also the server is restarted after the latest XML file(as shown below) is copied after all type of debugging with similar threads on this matter.
But when i click on the update button in the report (button is highlighted), i'm getting the error
"The system is unable to read the Write Back Template 'pmet_update'. Please contact your system administrator."
here is the xml.
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="pmet_update">
<XML>
<writeBack connectionPool="PMTCOG">
<insert></insert>
<update> UPDATE XREF_PMET_URL SET URL= '@{c1}' WHERE API='@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Could you please help?

Hi,
I think that you have to spacify also an SQL statement for the update tag, for example:
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="pmet_update">
<XML>
<writeBack connectionPool="PMTCOG">
<insert> select null from dual</insert>
<update> UPDATE XREF_PMET_URL SET URL= '@{c1}' WHERE API='@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
The witeback wants for both the tags (<insert></insert> and <update></update>) an SQL Statement.
For me it works.
Let me know!
Gianluca Ancarani

Torch - Unable to read content of email

Not sure what happened - I was receiving email fine, able to open email and read them.
Now I am unable to read the content of the email. Page remains blank.
Can anyone help me resolve this problem?
Thanks

Hi and Welcome to the Forums!
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Intermittent 'Unable to read file' error when exporting/opening .html to .xls

Hi, hope someone can help.
I have an issue where I export a report from the Salesform platform to Excel. The file that is being exported is in html format and the report does not include any Pivot tables.
The 'Unable to read file' error occurs intermittently, when Excel is already open and you export/open it from Salesforce...
Have tried using Excel in safe mode with all the add-ins disabled and still no joy. The
Do not save encrypted paged to disk option has been un-ticked the in Internet Options -> advanced.
The issue happens in IE and other browsers, after raising the issue with Salesforce support they advised to raise the issue with MS instead, so here I am to see if anyone can help!
Any help would be much appreciated

Tools>Internet Options>Advanced tab, uncheck "Do not save encrypted files to disk"
check your GPO settings to see if you have configured this to be unchecked.
Thx.
Rob^_^

Zen Xtra (Nomad) - Unable to read from device error (have tried everythi

Recently, I've been having problems with my Creative Zen Xtra Nomad mp3 player. One day it started freezing and lagging massi'vely when I would enter nomad explorer. Now it's virtually impossible to drag and drop something from nomad explorer to my computer or vise versa (keep getting the unable to read from device error). However, sometimes I am able to get an mp3 or two after about 5 minutes of transfer time.
I have no idea why it is doing this. One day I'm transferring my data back and forth with no problem, and the very next day I am getting this freezing, lagging, and errors when trying to transfer. The only thing that changed was me formatting my computer in between it working and it not working, but I did reinstall the driver and nomad explorer once I formatted (I'm also using the same USB 2.0 cable, but it worked fine the day before, so I am pretty sure that's not part of the problem). I was using the mp3 player to store about 0 GB worth of data for when I formatted, and now I'm unable to retrieve virtually any of it. I've tried everything under the PC Connectivity link short of formatting the mp3 hard dri've (and that is not an option because I need the files). I took it to a friends house to try on his computer, but it acted the same way. I'm completely stumped. Is there anything I haven't ruled out? Also, I'm running Windows XP Pro SP2, and I was using SP2 before the format as well if that has any relevance.
Please let me know if I've left out any important information relevant to this issue. Any help would be very much appreciated.
Thanks in advance.
-Noah Patterson
Edit: I'm having the exact problem as this guy, but I didn't seem to find any answers on his thread.
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=6459&query.id=3264 5#M6459
Message Edited by talzok on 09-20-2005 08:03 AMMessage Edited by talzok on 09-20-2005 08:09 AM

Never use MP3 players to store important data, or as a single point of storage for any data (that includes keeping a backup of the player's audio tracks). You can have problems like this with accessing the data, as well as simply dropping the player and losing the lot.
There are a couple of methods I've seen that have worked to retrieve data:
. Driver update - either update to the latest drivers, or nonsensically downgrade to the drivers that come on the install CD.
2. Notmad Explorer - use the Xtreamer function in Notmad Explorer's trial version (which is free) to access the data and download it. It will be tedious, because I assume you have to download one file at a time.
As for your general problem, I would try using Creative's MediaSource instead of Nomad Explorer to access the player (people generally don't have good experiences with Nomad Explorer).
Also make sure you download the latest versions of the drivers (taking above into account), MediaSource, and the MediaSource plugin from Nomadworld.com downloads.
Once you have the data off (hopefully!) you might simply want to reformat it if none of the above hel
ps.

Unable to read TLD "META-INF/jsf_core.tld

Hi guys,
I have Tomcat 5.5.7 and jdk1.5.0_02 on Windows XP Pro ! I am using jsf-1_1_01. One of my page is as below:
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core" %>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html" %>
<f:loadBundle basename="com.stufftolet.view.bundle.selectcountry" var="msg"/>
<f:view locale="#{catalogBean.currentLocale}">
and I got the following error:
org.apache.jasper.JasperException: Unable to read TLD "META-INF/jsf_core.tld" from JAR file "file:/C:/Tomcat5/webapps/stufftolet/WEB-INF/lib/jsf-impl.jar": org.apache.jasper.JasperException: Failed to load or instantiate TagLibraryValidator class: com.sun.faces.taglib.jsf_core.CoreValidator
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:50)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:179)
     org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:181)
     org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:418)
     org.apache.jasper.compiler.Parser.parseDirective(Parser.java:483)
     org.apache.jasper.compiler.Parser.parseElements(Parser.java:1539)
     org.apache.jasper.compiler.Parser.parse(Parser.java:126)
     org.apache.jasper.compiler.ParserController.doParse(ParserController.java:211)
     org.apache.jasper.compiler.ParserController.parse(ParserController.java:100)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:146)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     com.stufftolet.view.util.SecurityFilter.doFilter(SecurityFilter.java:70)
     de.mindmatters.faces.spring.RequestHandledFilter.doFilter(RequestHandledFilter.java:117)
Appreciate if someone could give some help here, Thanks !
regards,
kmthien

Hi
I am also facing the same problem. But I am using tomcat 5.0.xx and i havnt included extra jsp-api in the lib. But getting the error
JSP Parsing Error:Failed to load or instantiate TagLibraryValidator class: com.sun.faces.taglib.jsf_core.CoreValidator
tried all the options...but yet not got where is the problem.
Please help.

SPRING App through JBOSS - error:Unable to read TLD

Hello,
First post for me, not 100% certain I am in the right forum, but here I go.
I am using Eclipse 3.1, JRE j2sdk1.4.2, spring-framework-1.2, and JBOSS 3.2.7 to follow this tutorial
http://www.springframework.org/docs/MVC-step-by-step/Spring-MVC-step-by-step-Part-2.html
on building a simple Spring MVC application.
I am using jstl.jar,standard.jar (among others) from the spring-framework-1.2 release. I noticed JBOSS starting to go nuts after adding these 2 jars specifically.
My project .war is deployed to JBOSS containg a WEB-INF/lib storing the .jars (standard.jar, jstl.jar ...) I do not have these .jars configured in JBOSS' classpath.
When I run my app and hit my my servlet followed by jsp page, JBOSS reports a runtime exception.
jsp...
<%@ include file="/WEB-INF/jsp/include.jsp"%>
<html>
<head>
<title>Hello :: Spring Application</title>
</head>
<body>
<h1>Hello - Spring Application</h1>
<p>Greetings, it is now <c:out value="${now}" /></p>
</body>
</html>
exception...
: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: /index.jsp(1,1) Unable to read TLD "META-INF/c.tld" from JAR file "file:/C:/java/jboss-3.2.7/server/default/tmp/deploy/tmp3725spring_app.war/WEB-INF/lib/standard.jar": org.apache.jasper.JasperException: Failed to load or instantiate TagLibraryValidator class: org.apache.taglibs.standard.tlv.JstlCoreTLV
at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
I confirmed that this standard.jar is deployed/accessible, and the tld is present.
any ideas?
Thanks,
Chris

Hi
I am also facing the same problem. But I am using tomcat 5.0.xx and i havnt included extra jsp-api in the lib. But getting the error
JSP Parsing Error:Failed to load or instantiate TagLibraryValidator class: com.sun.faces.taglib.jsf_core.CoreValidator
tried all the options...but yet not got where is the problem.
Please help.

Unable to read from Jukebox Need Urgent he

Need help, fast, Only got and a half day left to get my Creative Zen Touch to work, I have tons of important files in it and I need it badly!I'v been using my Zen touch as a storage device like a USB or sumthin, newaiz, I just upgraded the firmware to .0.03, from .00.06 to .0.03 to be more detailed. I have read some other posts relating to this kind of matter, I tried the ... Disc Clean Up solution, downloading the latest software except those CD burners program, I uninstalled all of my Creative Programs and installed an older version of the program and still didnt work then I upgraded those program and still wont work. Went to read the FAQs, couldnt find any answers. Can anyone please give me a useful response? I need it badly Please be fully detailed, I am not very familiar with shortcut details. Thanks

Sorry this is not an answer but I just posted this on the European boards and it might make solving this problem a bit easier:
Player: Nomad Jukebox Zen Xtra 30GB
Firmware: .20.08
Explorer: 3.0.0
Driver: .26.02
OS: XP SP2 updated
MB: MSI K8Neo Platinum (MS-7030) (AwardBIOS 6.00PG)
Processor: AMD Athlon64 3200+
Memory: GB Patriot 3200 DDR
Video: ATI Radeon 9600 Pro (DNA 3.4.4.) (Directx 9.0c)
Sound: Audigy Gamer (03030 driver)
HD: Maxtor 6Y60MO (60GB)
So I made the mistake of using my mp3 player as the sole backup device for 30 Gigs of my music. I used the motherboards included highspeed USB port by the way. So now that I have reformatted and reinstalled everything I try and copy it all back from the Data Library section of my player using Nomad Explorer and end up waiting a few minutes while the software decideds if it will freeze or not before ending up with an error of: "unable to read from jukebox device"
This is MOST DISTRESSING, I would really appreciate more help than the other 2 people who posted this problem got (read: none). So if anyone has any ideas besides reinstall nomad explorer (which I did) then I am all eyes.
Thank you for your time and help.
Nick T
Maybe if you could post your system specs we could see a similarity or two, like what type of USB port did you use...Message Edited by kalisto_9 on 0-02-2005 0:08 PM

Unable to read dependencies of an included VI.

Similar Messages

Maybe you are looking for