Unable to receive all fields at receiver

Hi,
I have simple scenario from file to file using file content conversion at both sides.
<b>Strucure of my file is</b>
MT_emp_profile
   Details
|_Records
          |_emp_no
          |_ emp_name
          |_ emp_dno.
My file is getting created at receiver end, but its showing only first field(i.e emp_no) other two fields are not shown..
Pl help!
<u></u>

Hi ,
Are you using mapping interface in this scenario ?
If you not using any file content conversion in File adapter communication channel configuration then check the data in SXMB_MONI transaction . Get the payload and check it.
Please provide us with your source and target Message types and Message interface details.
Nanda
Message was edited by: Nanda kishore Reddy Narapu Reddy

Similar Messages

Unable to show all fields from a table\view within a SSRS Report Model for user selection

I recently added a new view with a simple SELECT (with 3 fields) statement to our existing Report Model DSV. I then went ahead to the report model (.smdl) file proceeded with the auto-generation of the new attributes which of course ran with no issues.
I was seeing the three new fields as attributes. But when I went within the existing Perspective to add the newly added fields so that the users see them, one of the field is missing. It is just a VARCHAR field. What would it cause this field to not show up
within a Perspective?
Any help is greatly appreciated.Thanks,
Nimesh
NM

Hi NM,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

All of a sudden I am unable to receive e-mail through comcast on my PC. I am able to send e-mail. I can receive comcast e-mail on my phone and tablet

All of a sudden I am unable to receive e-mail through comcast on my PC. I am able to send e-mail. I can receive comcast e-mail on my phone and tablet. One help topic suggested I delete the password for my comcast mail and that I would be prompted to set up a new password. No such prompt appeared. I am wondering about help for this problem. I'm also wondering if I can delete the account nd add it again and what would be the ramifications of doing so.

check the settings in your mail settings, outgoing server. If your ipad is ok, compare the settings with the ones on the phone

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.
The internet goes out and I have to reset network setting each and every time. This is only a temporary solution which by the time I release the line with Spring or leave the apple store the issue is back. Sprint indicates that it is a know issue with the Iphone 5 and apple says it is a network issue as Sprint's network is not up to par with the Iphone and can not meet the expectations on the Iphone 5.
I have attached a few picture, as you can see it clearly says I have 5 bars and 3g available but I have no connections what so ever.
This issue affects all data and so I can not send or receive picture messages, use apps, or access the internet. The data goes in and out intermittently and it seems the phone chooses what I can and can't do.
For example I can watch Youtube or Vevo videos but I can not access Facebook or Instagram.
Is anyone else having this issue?
I will soon loose my patience....
I have reset my phone three time and have reset network and other setting mutltiple times.

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset.

TS3276 unable to receive and send mail

I have been having problem with mail. Unable to receive or send. Something is messed up. HELP

Please describe in detail what happened when you took all the applicable steps in the support article. That's the starting point for any further efforts to solve the problem.

Unable to receive special characters in XML using UTL_HTTP request from Other application

Hi Team,
We are using SOAP request in Oracle Application to Pull XML data from Other application.I am using below commands before receving response but still i am unable to receive special charcters/Spanish Charcters in XML.
utl_http.set_body_charset(v_http_req, 'UTF-8');
utl_http.set_header (v_http_req, 'Content-Type', 'text/xml');
Thanks and Regards,
Raghul

Hello,
Just when you think that you know everything, it is slammed in your face that you don't. The .Mac member name field in the System Preferences DOES NOT take your whole e-mail address. It only takes your user name or whatever comes BEFORE the "@" symbol. There was absolutely nothing wrong with my MacBook Pro (other than ther brain dead user).
Sorry for wasting your time...
If we learn from our mistakes, then I obtained my PhD years ago,
Dr. Z.

Mail attachement more than 5KB user is unable to receive

Hi All
We are trying to send the mail from SAP to Lotus notes with attachment, if more than 5KB user is unable to receive attached
mail, at the same time user is able to receive the mail if less the 5KB of SIZE.
where we need to change the setup to allow more than 5KB of Attachment mail from SAP.
Please help us to reslove the above issue.

Hi Matt Kangas
we have checked the mail server there is no issue in the SMTP Mail server as well as there is no restriction in SMTP Level.
Please clarify.
Regards
Edited by: Krishguna on Nov 18, 2009 6:35 PM

Unable to receive Queue Message Unable to create Queue in MDM 2.0.1

Hi All,
I am getting below exception when i am trying to read JMSQueue from weblogic server to MDM 2.0.1
Steps i configured as below:
Created XAI JNDI server : XAI JNDI Server(Demo), Provider URL(http://localhost:7001), Initial Connection Factory(weblogic.jndi.WLInitialContextFactory)
created XAI JMS Connection:XAI JMS Connection(DemoConn), XAI JNDI Server(Demo), JNDI Connection Factory(weblogic.jms.XAConnectionFactory)
created XAI JMS Queue: XAI Queue Name(DemoQueue), Queue Name(TestQueue), XAI JNDI Server(Demo)
created XAI Receiver DemoRx mapped with XAI Class JMSRCVR and with above configurations
MPL is creating intial context factory for jndi server properly and intializing queues properly.
But getting namenotfound exception at Receiver DemoRx
[Thu May 26 15:01:46 IST 2011] Receiver DemoRx - Read interval is 10 seconds.
[Thu May 26 15:01:47 IST 2011] Receiver "DemoRx" initialization failed:Unable to receive Queue MessageUnable to create Queue: javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '']; remaining name 'TestQueue'
com.splwg.mpl.receiving.ReceiverInitException: Unable to receive Queue MessageUnable to create Queue: javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '']; remaining name 'TestQueue'
     at com.splwg.mpl.jms.queue.JMSReceiver.prepareConnection(JMSReceiver.java:394)
     at com.splwg.mpl.jms.queue.JMSReceiver.init(JMSReceiver.java:266)
     at com.splwg.mpl.receiving.AsyncReceiverManager$1.call(AsyncReceiverManager.java:232)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
Please help me in this regard
Thanks in advance,
sukumar

Hi Suraj,
I would prefer to discuss the problems in the forum. There are maybe other that have the same problem and they could then participate from the discussion.
No back to your problem:
As fare as I know there is no build in function to read directly from file system.
MPL is no longer supported in this product and this was the only module for reading the file system.
You have to develop an application to fetch the files form the file system or you must use an Enterprise Service Bus
like OSB or ServiceMix.
To enable the system for the IMD import you have to publish a Business Object or Script via XAI Inbound service.
The recommended way is to use the D1-IMDSeeder BO.
There is a chapter in the MDM Configuration Guide, explaining how to setup the XAI Inbound service.
There is also a service script available. The advantage of the service script is, that you can import IMDs for more than on device (D1-IMDEvtUpl and DM-IMDEvtUpl). The DM-IMDEvtUpl is eventually only in the demo database available.
The disadvantage of the IMDSeeder is, that you have to setup a lot of configurations in the system. There is another thread in the forum explaining the setup.
My preferred way is to use the D1-InitialLoadIMDScalar or D1-InitialLoadIMDInterval BO but you have to do a lot of things by your own.
/Markus

APs unable to receive IP address from DHCP (core 6500 series switch)

Dear Friends,
a week ago I had stable wireless network APs were getting IPS from 6500 series switch (DHCP) but unfortunately some WISM got rebooted and now APs are unable to receive IP address from Core 6500 DHCP, to cater this issue I have another DHCP server configured on windows 2008 i created another subnet and and put APs in that vlan now all APs are are successfully receiving IPS from windows DHCP server I don't know why APs are not able to receive IPs from core 6500 series DHCP.
please advice
Thanks
Faysal

Thanks george for stepping up here is DHCP config
ip dhcp excluded-address 10.10.30.1 10.10.30.20
ip dhcp excluded-address 10.10.8.1 10.10.8.10
ip dhcp excluded-address 192.168.10.1 192.168.10.5
ip dhcp excluded-address 10.9.20.1 10.9.20.30
ip dhcp pool vlan_30
network 10.10.30.0 255.255.254.0
default-router 10.10.30.1
option 60 ascii """"""""""""""""""""""""CiscoAPc1250""""""""""""""""""""""""
option 43 hex f110.0a0a.1e0b.0a0a.1e0d.0a0a.1e0f.0a0a.1e11
dns-server 10.10.2.11
lease infinite
ip dhcp pool WiSM1_SP
network 192.168.10.0 255.255.255.248
default-router 192.168.10.1

Unable to receive emails from specific domains

Hi,
One user in our company is trying to send email in different domain but
recipient is unable to receive email from our side. Below mentioned is the NDR report:
[email protected]
The recipient's e-mail system isn't accepting messages now. Please try resending this message later or contact the recipient directly.
The following organization rejected your message: smtp.xxx.net
Kindly guide me how i can diagnose that there is no problem at our side because all other users are sending emails in different domain without any problem.
Thanks & Kind regards,
Osama Aftab.

That http://x.co/rblbounce URL redirects here
http://help.secureserver.net/article/3568#rbl . Scroll down, and you can see their explanations for the 554 status you are receiving. I've pasted them at the end. I'm going to
guess that if you type your domain name in here
http://mxtoolbox.com/blacklists.aspx
you'll find that you're listed at Spamhaus.
554 RBL Reject.
This IP address has been blocked from our internal RBL.
Follow the link provided in the bounceback to submit a request to remove this IP address.
554 Connection refused. This IP has a poor reputation on Cloudmark Sender Intelligence (CSI). IB103
This IP address has a poor reputation on Cloudmark Sender Intelligence (CSI).
Check Cloudmark Sender Intelligence to see the reputation of the sending IP.
554 Connection refused. This IP is listed on the Spamhaus Block List (SBL). IB104
This IP is listed on the Spamhaus Block List.
Check to see if the IP is listed on the
Spamhaus Block List.
554 Connection refused. This IP is listed on the Exploits Block List (XBL). IB105
This IP is listed on the Spamhaus Exploits Block List.
Check to see if the IP is listed on the
Spamhaus Exploits Block List.
554 Connection refused. This IP is listed on the Policy Block List (PBL). IB106
This IP is listed on the Spamhaus Policy Block List.
Check to see if the IP is listed on the
Spamhaus Policy Block List.
OWA For SmartPhone

Upgraded to Mountain Lion a week ago suddenly unable to receive incoming emails from Mail.6

Upgraded to Mountain Lion a week ago. Suddenly unable to receive incoming emails from Mail.6
Can successfully send outgoing messages.
Have completed following tasks to no avail:
1)          When click on "Take all accounts online" and entering password for gmail / looking at Mail Connection Doctor: Got Green light, Mail was able to connect to the Internet. But…
"Trying to log in to this Goggle Imap account failed. Verify username and password are correct."
I have verified username and password being correct.
2)          System Preferences > Mail, Contacts and Calendars typed in name, email address & gmail password and got this message.
"Unable to verify account name and password."
3)          Mail> preferences>account>password. Confirmed correct password, name, email address and imap "address" Then to Advanced & confirmed correct port . Restarted computer.
"lay person terms" appreciated.
Thanks!
Laila

Found solution, Yeay!   No coincidence. Mountain Lion (osx 10.8, upgraded) is not compatible with Gmail if one has 2-step verification set up on their gmail security settings.
There are 2 options to solving problem
1)   https://discussions.apple.com/message/19109209#19109209)
This will take you through the process to disable 2-step security feature on gmail security page. Thank You iPatA.
2)   http://support.google.com/accounts/bin/answer.py?hl=en&ctx=ch_b/0/SmsAuthConfig& answer=185833
This will take you through the process of assigning an "application specific password" to upgraded Mail 6.0 for successful communication between Mail 6.0 Mountain Lion while keeping a 2 step verification process if you prefer.
Thanks for you energy & effort rkaufmann87.
Sincerely, much appreciated.
I love this Apple community.

Why am I unable to receive incoming mail?

Why am I unable to receive e-mail but I can send it? Mail version 3.6 for Macbook.

I took it to the Apple store and it had them all stumped. They kept saying I had to have a "bad" e-mail that was preventing others from passing. They tried to erase all e-mails but it still wouldn't work. When they were just about ready to give up the man decided to wipe out anything having to do with e-mail-and start a new account, so I lost messages, but once he cleared all e-mail related items on the laptop, the mail went through!!!
I haven't had problems since- so....I hope that helps!!

I am unable to receive or send emails, have apple mail version 4.6 (1085) and snow leopard, OSX 10.6.8

I am unable to receive or send emails, have apple mail version 4.6 (1085) and snow leopard, OSX 10.6.8, MacBook Incoming mail server “mail.me.com” is greyed out How do I resolve this problem? All help appreciated [email protected]

Try these server settings.
Mail Server Information

Unable to receive emails on third party account

Hi
I have several email accounts all at the same domain. They have worked flawlessly for 2 years until today,
I am no longer able to receive mail on these accounts using BT Broadband however when I switch to my mobile broadband I am able to receive my mail as usual.
I contacted BT who remotely changed my Send details even though sending mail was working fine till the changes. I have returned the Send settings back to where they were.
Please does anyone have an idea what could be wrong.
Many thanks

Hi
No my email is with daily.co.uk and my mobile bb is TMobile.
I have reset all my settings and can send/receive using TMobile. I can send using mail.daily.co.uk but am unable to receive when using BT BB.
My mail was working fine this morning

One of my contacts is unable to receive my text messages since I updated my iPhone 4s?

Since updating my iPhone, a few of my contacts have been unable to receive my text messages? One of the contacts originally had an iPhone but changed device before I updated, I was able to send and they were able to receive text messages prior to the change, the problem has arisen since update? More recently another contact who also has an iPhone is now unable to receive my text messages? Has anyone else experienced this problem, and if so what did you do to resolve it? Thanks.

Hi susandlee,
Wow this definitely sounds like strange behavior and something we need to investigate further. I want to find out, on your iPhone 5, do you have any signatures set? When you send text messages, do you include any emoticans or special characters? These aren't compatible with all type of devices and networks so we want to eliminate any causes of the trouble. If you do have anything like this set please remove the items and test the texting communication again. We look forward to hearing back to get this resolved.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport

Unable to receive all fields at receiver

Similar Messages

Maybe you are looking for