Unable to recognize the server status in OEPE, shows error alert
Hi,
On windows 32 , I installed the WSL 10.3.3 + OEPE and the OSB 11g.
I have configured the a base_domain with a dtabse of 10g (10.3) Express edition.
When I try to start the server from OEPE (Eclipse), the server starts and the console show the server is RUNNING. Even I can connect to OSB Console from Browser.
However, the servers tab in the eclipse unable to recognize the status, and returns back to STOPPED with an Alert message "Server xxxx unable to start.
So I am not able to do anything in the OEPE, its urgent please, any help .
Thanks in advance.
-- Khaleel
Hi Ravi,
Thanks for the suggestion. Actually the server and domain all are running well. I can start and stop from the startup menus and command scripts.
The only issue is in the Eclipse (OEPE) when I try to connect the server. However I found the solution that I need comment the localhost entry in hosts file as below.
# 127.0.0.1 localhost
Now the server is connecting well. However I have another issue, that I am not able to shutdown the server from startup menus. I suspect the t3 protocal and HTTP protocal related. If you have any suggestions please help me.
Note: if still have issues then try by removing the LAN connection, or install the Microsoft Loopback Adapter.
But I am still looking for options without commenting the localhost in the hosts entry.
--Khaleel
Edited by: Khaleel Shaik on Dec 8, 2010 2:58 PM
Similar Messages
-
The server was unable to process the request due to an internal error.
Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=169433
-->
<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227
Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks ! -
Manged servers is not getting started (Unable to initialize the server)
Hi,
I have weblogic 7.0 is installed in solaris . I configured one of my managed servers on port 80 , while starting the managed server it's giving me the following error:
<May 27, 2009 12:20:05 PM IST> <Emergency> <WebLogicServer> <000350> <Unable to create a server socket on Channel Default for: 172.16.42.16, port: 80. java.net.BindException: Permission denied Perhaps the address 10.16.39.16 is incorrect or another process is using port 80.>
<May 27, 2009 12:20:06 PM IST> <Emergency> <Security> <090085> <Server failed to bind to any port such that it is not reachable from the console.>
<May 27, 2009 12:20:06 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal initialization exception>
ontext.java:2727)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:2700)
at weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:563)
at weblogic.servlet.internal.WebService.preloadResources(WebService.java:476)
at weblogic.t3.srvr.ServletInitRunner$1.run(ServletInitRunner.java:50)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.t3.srvr.ServletInitRunner.run(ServletInitRunner.java:46)
at java.lang.Thread.run(Thread.java:479)
<May 27, 2009 12:22:38 PM IST> <Emergency> <WebLogicServer> <000350> <Unable to create a server socket on Channel Default for: 172.16.42.16, port: 80. java.net.BindException: Permission denied Perhaps the address 172.16.42.16 is incorrect or another process is using port 80.>
<May 27, 2009 12:22:39 PM IST> <Emergency> <Security> <090085> <Server failed to bind to any port such that it is not reachable from the console.>
<May 27, 2009 12:22:39 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal initialization exception>
Please do needful to reslove the problem.
Rgds,
Krikar.Hi Krikar,
Make sure -
1. IP is correct.
2. Specified port is not in use
For getting the ports-in-use list, follow below link -
http://www.unix.com/sun-solaris/87330-list-tcp-ports-process.html
Regards,
Anuj -
Unable to initialize the server: Server failed to bind to the requested por
I am facing the error while starting the server. I see the following error.
<Sep 26, 2007 11:49:54 PM EDT> <Emergency> <WebLogicServer> <BEA-000350> <Unable to create a server socket on Channel Default for: 162.86.20.87, port: 8101. java.net.BindException: Address already in use Perhaps the address 162.86.20.87 is incorrect or another process is using port 8101.>
<Sep 26, 2007 11:49:54 PM EDT> <Emergency> <Security> <BEA-090085> <Server failed to bind to the configured port. The port may already be used by another process.>
<Sep 26, 2007 11:49:54 PM EDT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: Server failed to bind to the requested port. See preceeding log message for details.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.server.ServerLifecycleException: Server failed to bind to the requested port. See preceeding log message for details.'
Reason: Server failed to bind to the requested port. See preceeding log message for details.
If the port is already in use how to find which server is running on that port, how to find the process and kill it. I am using weblogic 8.1 sp4 in Solaris 8.Bruce:
It sounds like (as you already note) failed to shutdown WLS, that is why the
.loc file was held and why the port is in use, WLS process was still
running. To see why it failed to shut down, I would examine the
weblogic.log, aslo the servers std out and err. Additionally taking a
thread dump (if possible) on the "it wont shut down" wls java process should
show (maybe unless the VM is hosed), where/what is hanging on/around. Do
you happen to have native code running with wls, say a type 2 JDBC driver?
Otherwise it sounds like a VM bug. But more data is needed to be sure.
Cheers
mbg
"Bruce Bryan" <[email protected]> wrote in message
news:3ef08499$[email protected]..
I was shutting down the WLS server using the console shutdown and itfailed to shutdown completely. I then attempted to use the kill command on
the process which usually works. This time I was unable to kill the process
without using the kill -9 command. When I attempted to bring the server
back up I got a failure to get a lock on the embedded ldap. I removed the
.loc file and came further up but was unable to get further than the
listener ports which were still locked to the old process. Do you know of
anything I can do the get the WLS server back up without rebooting my
Solaris server????
netstat -an shows the port is in use but the only process that is alloweduse that port is WLS. -
I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?
how new is the Notebook ?
Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB -
Hello,
Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
Unknown Host
Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
Can anyone help me please, and the same website is accessible with my phone.
Help me please. :(
Regards
-Try http://www.transitbux.com/
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies" -
Messaging Server 4: WebMail login returns "unable to locate the server"
When I log into WebMail, the following error occurs:<BR>
<P>
Netscape is unable to locate the server <I>hostname</I>.
Please check the server name and try again.
<P>
<B>End User</B>
<P>
First verify that you cannot reach the hostname
server by using the ping
utility (Windows NT or Unix). If
you cannot reach the host, report this problem to the appropriate system
administrator or help desk.
<P>
However, if you can reach the host with ping
, then the problem may be a minor
networking issue that you can resolve. There is also the possibility that
the network has been configured to allow users to ping
unreachable systems. You can use the
following actions to rule out possible sources of the problem:<BR>
<P>
<OL>
<LI>Attempt to log in to WebMail again. If you can log in successfully, then
the problem with the WebMail server may have been temporary or is an
intermittent problem.
<P>
<LI>End the current browser session and then restart the browser and try to
connect to the WebMail server again. If you can log in successfully, then,
most likely, the browser had cached some old network information that was
reset when you exited the browser.
<P>
<LI>Verify the DNS configuration of your system and then restart the entire
system.
</OL>
<P>
If the above actions do not work, then you will need to contact the
system administrator or the help desk.
<P>
<B>Mail Server Administrators</B>
<P>
As the problem with connecting to the WebMail server is caused by configuration
or availability problems, make sure that users who report this problem have
HTTP network connectivity to the hostname. The following scenarios are
possible causes of connectivity problems:<BR>
<P>
<UL>
<LI>Users have the wrong proxy.
<LI>Users are being blocked by firewalls.
<LI>Users are connecting from the wrong network.
<LI>Users specify the incorrect DNS servers.
</UL>
<P>
In addition, users may also report that the server is down. As the login page
for WebMail does not contain URL links that are FQDNs or absolute path names,
it is possible that users may still be able to see the login window if it was
cached or loaded before the server stopped working.
<P>
In some cases, it may be necessary to access the hostname that is used in the
WebMail links. This hostname setting is stored in the configdb
parameter
service.smtp.messagehostname.
This configuration setting is not mentioned in the Messaging Server
documentation.
<P>
The messagehostname is a
configuration value that affects many server functions. For this reason, do
not make changes to this value without first considering the effects of such a
change on other WebMail settings, such as the postmaster group and user
mailhost values. Also, please note that changing messagehostname
is not supported from Console.
<P>
For more information on messagehostname
, please see "What is messagehostname?"
at<BR>
article 4250
<P>
You can also find documentation for configutil
in the Messaging Server Administrator's
Guide at the following URL:<BR>
<P>
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887
<P>
<B>Note:</B> You must stop and restart the HTTP service in order for changes to
the messagehostname to
take effect.When I log into WebMail, the following error occurs:<BR>
<P>
Netscape is unable to locate the server <I>hostname</I>.
Please check the server name and try again.
<P>
<B>End User</B>
<P>
First verify that you cannot reach the hostname
server by using the ping
utility (Windows NT or Unix). If
you cannot reach the host, report this problem to the appropriate system
administrator or help desk.
<P>
However, if you can reach the host with ping
, then the problem may be a minor
networking issue that you can resolve. There is also the possibility that
the network has been configured to allow users to ping
unreachable systems. You can use the
following actions to rule out possible sources of the problem:<BR>
<P>
<OL>
<LI>Attempt to log in to WebMail again. If you can log in successfully, then
the problem with the WebMail server may have been temporary or is an
intermittent problem.
<P>
<LI>End the current browser session and then restart the browser and try to
connect to the WebMail server again. If you can log in successfully, then,
most likely, the browser had cached some old network information that was
reset when you exited the browser.
<P>
<LI>Verify the DNS configuration of your system and then restart the entire
system.
</OL>
<P>
If the above actions do not work, then you will need to contact the
system administrator or the help desk.
<P>
<B>Mail Server Administrators</B>
<P>
As the problem with connecting to the WebMail server is caused by configuration
or availability problems, make sure that users who report this problem have
HTTP network connectivity to the hostname. The following scenarios are
possible causes of connectivity problems:<BR>
<P>
<UL>
<LI>Users have the wrong proxy.
<LI>Users are being blocked by firewalls.
<LI>Users are connecting from the wrong network.
<LI>Users specify the incorrect DNS servers.
</UL>
<P>
In addition, users may also report that the server is down. As the login page
for WebMail does not contain URL links that are FQDNs or absolute path names,
it is possible that users may still be able to see the login window if it was
cached or loaded before the server stopped working.
<P>
In some cases, it may be necessary to access the hostname that is used in the
WebMail links. This hostname setting is stored in the configdb
parameter
service.smtp.messagehostname.
This configuration setting is not mentioned in the Messaging Server
documentation.
<P>
The messagehostname is a
configuration value that affects many server functions. For this reason, do
not make changes to this value without first considering the effects of such a
change on other WebMail settings, such as the postmaster group and user
mailhost values. Also, please note that changing messagehostname
is not supported from Console.
<P>
For more information on messagehostname
, please see "What is messagehostname?"
at<BR>
article 4250
<P>
You can also find documentation for configutil
in the Messaging Server Administrator's
Guide at the following URL:<BR>
<P>
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887
<P>
<B>Note:</B> You must stop and restart the HTTP service in order for changes to
the messagehostname to
take effect. -
Script for Checking the Server Status
Hi All,
I just need the script for monitoring the server status through the WLST.My scenario:I have 2 server in Running State.If any one of the server get failed or in not RUNNING state then i use the script for starting that server automatically.I tried some of the script but it is not working properly .If any one have the sample script please share with me.
Regards,
Ove.Hi Syed,
Replication state is very easy to see in 4.x and earlier. The last changenumber in the supplier changelog is visible (on the root DSE IIRC), and each consumer suffix has an operational attribute "copiedfrom" that tells you the name of the supplier, the database generation id, and the last change replayed from the supplier.
So a script that compares the results of
ldapsearch -h <supplier> -s base -b "" "objectclass=*" lastchangenumber
and
ldapsearch -h <consumer> -s base -b <base_suffix> "objectclass=*" copiedFrom
will show you if a replica has fallen out of sync. It won't tell you more than how many changes behind the replica is, though, because pre-5.x changenumbers are sequential integers, not timestamps.
However, the change that corresponds to the changenumber is clearly visible under the "cn=changelog" suffix. So if you look at the change itself you can see the timestamp on it.
For more info on the status of replication, you should be able to query the agreements on the supplier. Those live under the "Netscape Machine Data Suffix", which you can also find on the supplier's root DSE:
ldapsearch -h <supplier> -s base -b "" "objectclass=*" netscapemdsuffix
And of course the error logs will usually tell you if replication is failing outright.
I may be off on some of the attribute names, but if you do some investigating along these lines, you should be able to figure it out. -
My adobe cc keeps telling me that its unable to reach the server
my adobe creative cloud keeps telling me that its unable to reach the server. It told me to check the firewall and i did but im still unable to download programs
Mybe,because you did not installed well,or because the server does not work propperly at that time!
-
Browser unable to update the service status bits
I am having an issue with my computer becoming non-working. After a period of time of inactivity and then I go to use the computer, I can move the mouse cursor around but can do nothing else. I have noticed that when moving the cursor around that when I move it to the task-bar I get the hour glass waiting icon. I checked the event viewer and in the applications log I have numerous errors which say "The browser was unable to update the service status bits" Can you explain this and are there any fixes? Thank you
Hi Avinash,
Yes, CTS_BROWSER service is active. It was working before when I click to test. Unfortunately, it started throwing error. We are on SP13 in SOLMAN. I'm using solman as an ABAP stack.
Thanks for your time. -
Microsoft exchange email worked fine, now iPad does not recognize the server
exchange was working fine until friday of last week, then it can no loger recognize the server or passwords. i reset it, rebooted, changed the password even. still does not recognize. any help? ideas?
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Hello,
I have Weblogic 9.2 server.
I was having one server domain installed and running fine on port 7006.
Yesterday I created a new domain on port 7106. The new domain got created successfully but after that I am not able to stop the server.
It gives following error.
Failed to connect to t3://138.240.37.57:7006: Destination unreachable; nested exception is:
java.net.ConnectException:No available router to destination
Please help.
Thanks,
Yatrikcan you share more details like What kind of Environment and all. Then we can understood more about This issue
Regards
Babu. -
Test-pstnoutboundcall failure 500, The server encountered an unexpected internal error
Hi,
We have a Lync 2013 pool, Front end colocated with Mediation server.
have trunk configured to CUCM. I'm able to receive PSTN calls, however cannot dial PSTN number.
While using test-CsPstnOutboundCall receive the following SRV record error.
Target Fqdn : lync2013pool.domain.com
Result : Failure
Latency : 00:00:00
Error Message : 500, The server encountered an unexpected internal error
Diagnosis : ErrorCode=1008,Source=sip.domain.com,Reason=Unable to resolve
DNS SRV record,domain=p
Microsoft.Rtc.Signaling.DiagnosticHeader
i can confirm that we have SRV record for _sipinternaltls._tcp.sipdomain.comHi AlinIliescu,
You can run the command with the Verbose parameter to get the detailed activity.
Please make sure you use an existed Lync account to test.
Make sure this user is Enterprise Voice enabled and assigned the related voice policy.
Best Regards,
Lisa Zheng
Lisa Zheng
TechNet Community Support -
Downloaded U2 free album. Unable to open the digital booklet. Adobe reader error shows up.
Same problem here using Preview: "The file 'Digital Booklet - Songs of Innocence.pdf' could not be opened. It may be damaged or use a file format that Preview doesn't recognize." Was also unable to open the file in Acrobat with similar. The file is corrupt.
-
I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474
Maybe you are looking for
-
Smart quotes driving me slightly nuts
I get copy sent in word documents. I've just moved my workflow from illustrator to indesign to speed things up. The font I use apparently does not contain the glyph for the smart quotes. When I paste into indesign I get little square boxes where th
-
Problem exporting .pdf to ANY OTHER FORMAT - is it me?!
Hello, The seasoned tech person will surely roll their eyes a dozen times while reading about my odyssey... It started as a project in Pagemaker 7 (I know, I know - I'll definitely be moving to InDesign CS4 after this!). I exported the .pmd file into
-
Can't open GMail in Firefox but can in I.E. - any suggestions?
HP Laptop running XP SP3 with FF4 default browser. ZoneAlarm firewall, but problem still occurs when this turned off. Gmail will not accept my username and/or password in FF but immediate access when switching to IE8.
-
I can't see what I'm editing.
I closed the screen and I don't know how to open it back up! Please help!!!!
-
I bought a film on apple tv and it does not appear in my itunes account on my computer
How do you transfer films bought on apple tv to your Mac?