Unable to review the resource access information

Hi,
I am new to portal. I am runing Oracle Portal Version: 10.1.2.3.0 (Build: 263).
I am able to review or edit my resource access information. However, I only see the blank information when I try to modify the other users. Could somebody let me know what privileges I miss? How do I assign the privileges to my portal group?
Thanks for your help,
Kam

Hi AMN,
Logn on as the portal user, I can see the information. Then I grant all the privileges to that particular user (User B). I still do not see the resource information after log as User B.
I have another user account (User A) that belongs to another admin group. If I log on as User A, I can see the resource information. Then I assign this admin group to User B. Log on as User B, I can see the resource information without any problem. I do not find any privileges differences between User B and the admin group.
I can find the basic information related to the particular admin group, user A and user B information in oiddas.
Could you show me what information I should look for? What priivileges I need to set in OIDDAS or in portal?
Thanks your help,
Kam

Similar Messages

How do you use Default Resource Access Information?

I have some 10g Forms & Reports that I want to use with SSO and they will all be connecting to the database with the same connection info. I know how to configure a Default Resource Access Information, but how do you use this with Forms & Reports?

Douglas,
the default Resource Access Infomation should be the connection information right? This is used in conjunction with SSO. You need to configure your F&R applications to delegate authentication to SSO by placing ssoMode=true in the config section of formsweb.cfg.
The Forms Servlet will connect to OID retrieve the Resource Access Information (descriptor) for a given user and automatically log them into the application.
Users will need a global identity in OID and SSO must be enabled to use resource access info with F&R
regards,
tt

Error while installing exchange2007 : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the

Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,

Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj

Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed

Each time I restart this exchange server, the Information Store and System Attendant don't start. If It try to manually start the services, I get the follow errors:
Event ID 5003:
Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed. This may be caused by a time change either in the client or the server machine, and may require a reboot of that machine. Other than that, verify that your domain is properly configured and is currently online.
Event ID 1005:
Unexpected error The clocks on the client and server machines are skewed. ID no: 80090324 Microsoft Exchange System Attendant occurred.
The clocks on the domain controllers and the exchange server are set to the same time zones. As well, all three clocks are in sync down to the second. Any ideas on what's causing this and how to fix it?

Run this Command from the Exchange Server
Net time \\ADServerName /Set
and confirm the action,
and then you need to restart the service
Microsoft Exchange Active Directory Topology Service
and confirm you are not getting the Error 4001 in the event Viewer.
Thank you, it resolved my issue after being sweating looking for solution.
How can I prevent this from happening? I cannot restart services on each server reboot nor lose 5 years of my life!!!
Sokratis Laskaridis MCP, MCTS, MCITP, Small Business Specialist Netapp ASAP, Symantec STS

Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f.

PLease help, I've rstored from backup three times with no success I'm getting the following error
"Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f. "
It's LDap related but i have no idea why :-(
Best Regards Bernhard

IPv6 had been disabled for months on my SBS 2008 Server running Exchange 2007 SP1. I ran 40 or so Windows Updates; subsequently, the next morning Exchange was no longer running; topology issues, event ID 2604, 2114 and 2601 were all over my Application
Log. After 12 hours of research I found this post; figured it was worth a shot and instantly all my services for Exchange fired up. Thanks for the tip; I have no idea which update changed what in regards to needing IPv6 enabled, but that silly
little check mark fixed it.
Thank you for sharing your solution!
Dan

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Unable to use the Assign Access Control feature in shared services

Hi,
When I try to right click on the essbase applicaiton in Shared Services to assign access control( to assign a new filter) I keep getting the following error
" Internet cannot display the webpage" message with the following
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
There might be a typing error in the address.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section
All the services are running file and I can create new users/ groups and also perform appication migration.
I'm using Hyperion 11.1.3.24 on windows 2003 r2.
Any help is appreciated. Thanks.
Regards

vs wrote:
John,
I tried the refresh button and nothing appears. I have created a group and gave it filter access. Now I'm trying to attach that filter to the group.
Appreciate your help.Can we replace backup .sec file for shared services?
For example: In planning if the .sec file corrupted then we replaced with old .sec file...rite...the same way can we do it in shared services?
I know if we replace the old sec in planning...it will take old securities only...
Edited by: Prabhas on Feb 12, 2013 9:27 PM

HT1918 I am unable to change the credit card information on my iTunes account

My old credit expired so I need to edit the credit card info...after trying with various different (and active) cards the iTunes window still tells me "Temporarily unable to process this request...please try again later"...I have done this for 2 days...The iTunes Help topics have no answers for this problem....it's been over 48 hrs since submitting my "help" request to Apple but still no follow-up. Perhaps the Apple support community has somene who knows what the problem (and fix) is? BTW, I'm really dissapointed at Apple lately: never-ending version control, redundant (annoying) security requests for login and really poor help menus. How about a FAQ for troubleshooting? Non-existent...I guess that's why people like us end up fending for ourselves in the "Community" help sewer, spending the night on Google looking for a real solution. Thanks Apple. You suck!

Spooky6243 has the solution for CC updates (it worked for me, anyway!): log in to the Apple Store on your web browser (http://http://store.apple.com/us) and then update your account inof there...credit card updates will appear on the iTunes application after making changes thru the website...I wonder why Apple never tells us this in the first place? Probably because it should work thru either application...good luck everyone!
P.S. - And make sure your iTunes app is closed before you make changes on the website (this may help you Geordon).

Unable to update the coverage area information on the device. USB 760

Hi all,
I am a new user of the USB760. Overall the device has been working very well.
I do get the error shown in the subject line though.
Can anyone offer any suggestions?
thanks !

Hi. I understand you have questions regarding your broadband device and I can certainly look into this for you. Where do you receive this error message? Does this happen when you are trying to connect or do you receive the error when you are already connected.
Waiting on your reply,
Thanks!

Unable to find the IP camera information.

Hi,
We have stacked switch WS-C2960S-24PS in which the IP camera is connected. I am not able to find the neighbour info of the camera, even after enabling the LLDP protocol. Can you help me in this..

Hi bw bw
It seems to be that particular Infopackage is not belongs to any process chain its
jus an ordinary loading i mean non process chain loading perhaps its an infopak
or individual..Do one thing go to the rsmo there u will find the load failure under
status red then under the header choose datatarget mange and then delete the
red request based on the eroor then finally go thae particular infopak start it
please make sure any job was scheduled if job was scheduled then rerun that
particular job..
Regards
R M K
**Assigning points ios the way of saying thanx in SDN**

Where can I code resource reference information in the WD?

J2EE Web Moudle Project
web.xml
 <resource-ref>
 <res-ref-name>
 jdo/defaultPMF
 </res-ref-name>
 <res-type>
 javax.resource.cci.ConnectionFactory
 </res-type>
 <res-auth>Container</res-auth>
 <res-sharing-scope>
 Shareable
 </res-sharing-scope>
 </resource-ref>
If a WD program should use the resource-ref,
How and Where can I write the resource-ref information?

Hi,
it does not work. You have to use the global JNDI Tree of the server. resource mapping is not supported.
You have to look in the jndi tree to find the jdo/defaultPMF. You can do this via telnet or in the visual administrator in the JNDI Registry service. Try a lookup there, the same lookup string should also work from WebDynpro application. But I have not recently tried to lookup the jdo PersistenceManager. It might have changed. Good luck.

How to automate iPPE Access Information filling in ie02

Hello users,
I am trying to automate the equipment creation using BAPI and BDC. I am able to create equipment using BAPI and BDC recordings for all the tabs in ie02 but not able to reacord the iPPE Access Information, where in there comes a popup Selection of iPPE Access which am not able to record in a BDC. Is there a better way to fill in the iPPE access information.

Hi Zabeen
This can be possible that you have made some changes to the recording code so transfer the recording to the program and execute it in foreground with any changes to that code, hope you will get the pop up window.
If that pop up is related to any message like warning or success then the BDC program will not take that into consideration.
Also use this option in SHDB.
option : simulate background mode.
while recording though BDC use the following option as ticked.
Default Size = X
Cont. after Commit = X
Not a Batch Input session = X
or try to change the equipment using BAPI_EQUI_CHANGE .There is a structure called DATA_SPECIFIC which is specific for Equipment related data.
For classification related changes, look at the FM's available in transaction BAPI
Cross Application Components -> Classification
Cheers
NZAB

HT201412 My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work, As long as I have this situation I can do nothing on

My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!

I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off?

Unable to find the IT Resource in Access Policy

Hi,
i have created the IT Resource in OIM11gR2 PS1. then i am trying to create the new access policy. i am unable to find the IT Resource in access policy. can someone please help on this.
Shyam

can you verify the access permissions. By default SYSTEM ADMINISTRATORS role should have read/write permission
or you can click ->Assign Role. then select ALL USERS role and provide read/write permission to it and see if this works.

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

Unable to review the resource access information

Similar Messages

Maybe you are looking for