Unable to save/write a CSV file to web portal

Hi All,
I am trying to save/write a file over the network(LAN) to web portal, currently running the my system on windows platform & the portal is located in unix box (in the network). Program runs fine & gives no error nor generates any warnings but its not saving/writing the file to the specified address. Could anybody please advise me why its not happening. Following is the code snipet:
URL url = new URL("http://IP:8080/a/b/c/d/e/a.csv");
URLConnection connection = url.openConnection();
//connection.connect();
connection.setDoOutput(true);
connection.setDoInput(true);
connection.setUseCaches(false);
BufferedOutputStream bos = new BufferedOutputStream(connection.getOutputStream());
bos.write(b,0,b.length);
bos.close();
I have tried to load a properties file also but its not parsing the path.
Thanks
Willy

You need Acrobat Pro, unless you have a Mac, and then you can "Save as PDF" from the print settings.

Similar Messages

How can I read, millions of records and write as *.csv file

I have to return some set of columns values(based on current date) from the database (could be million of record also) The dbms_output can accomodate only 20000 records. (I am retrieving thru a procedure using cursor).
I should write these values to a file with extn .csv (comma separated file) I thought of using a utl_file. But I heard there is some restriction on the number of records even in utl_file.
If so, what is the restriction. Is there any other way I can achive it? (BLOB or CLOB ??).
Please help me in solving this problem.
I have to write to .csv file, the values from the cursor I have concatinated with "," and now its returning the value to the screen (using dbms_output, temporarily) I have to redirect the output to .csv
and the .csv should be in some physical directory and I have to upload(ftp) the file from the directory to the website.
Please help me out.

Jimmy,
Make sure that utl_file is properly installed, make sure that the utl_file_dir parameter is set in the init.ora file and that the database has been re-started so that it will take effect, make sure that you have sufficient privileges granted directly, not through roles, including privileges to the file and directory that you are trying to write to, add the exception block below to your procedure to narrow down the source of the exception, then test again. If you still get an error, please post a cut and paste of the exact code that you run and any messages that you received.
exception
    when utl_file.invalid_path then
        raise_application_error(-20001,
       'INVALID_PATH: File location or filename was invalid.');
    when utl_file.invalid_mode then
        raise_application_error(-20002,
      'INVALID_MODE: The open_mode parameter in FOPEN was
       invalid.');
    when utl_file.invalid_filehandle then
        raise_application_error(-20002,
        'INVALID_FILEHANDLE: The file handle was invalid.');
    when utl_file.invalid_operation then
        raise_application_error(-20003,
       'INVALID_OPERATION: The file could not be opened or
        operated on as requested.');
    when utl_file.read_error then
        raise_application_error(-20004,
       'READ_ERROR: An operating system error occurred during
        the read operation.');
    when utl_file.write_error then
        raise_application_error(-20005,
            'WRITE_ERROR: An operating system error occurred
             during the write operation.');
    when utl_file.internal_error then
        raise_application_error(-20006,
            'INTERNAL_ERROR: An unspecified error in PL/SQL.');

Unable to save a 'smallest size file' pdf from illustrator 5.5

We recently insalled Adobe Standard 5.5
I often save PDF files from Illustrator using the built in PDF options available from the PDF drop down menu bar when saving files. Usually I will save a visual as a 'smallest file size' or make use of the 'high quality print' option for other files etc.
Why cant I do this on CS5.5?
In addition, the colour is not acurate at all!
Please help

Hi Scott - I found the following thread on the net. So I had a look on my time machine back-ups and copied the files from there, which I then pasted into my Settings folder as you suggested.
Ta da!! All working again!
Any idea how I could restore these settings from a backup?
Thanks!
The PDF presets reside in Root/Library/Application Support/Adobe/Adobe PDF/Settings/
After I had installed 10.6.5, 6 preset files were removed from the Settings folder. The folder tree itself remained, it was just that some of the contents of "Settings" were deleted. I have fixed the problem by copying the deleted settings files from a backup.
These are the files which were deleted:
Smallest File Size.joboptions
Press Quality.joboptions
PDFX4 2008.joboptions
PDFX3 2002.joboptions
PDFX1 2001.joboptions
High Quality Print.joboptions
These files were not deleted:
Standard.joboptions
PDFA1b 2005 RGB.joboptions
PDFA1b 2005 CMYK.joboptions
Oversized Pages.joboptions
Somebody at Adobe community support for Indesign directed me to restore these files from a backup, which solved the problem.
Re: Unable to save a 'smallest size file' pdf from illustrator 5.5

How to write a CSV file in OSB

Hi All,
can any one tell me How to write a CSV file in OSB?
Thanks.

Hey, I couldnot find any xsl usage inside pipeline pair in the links given by you. Do you have any links that gives a sample example.I could not find any links with examples. I will send you a simple config jar demonstrating the use of XSLT resources/transformations.
secondly should MFL doc replicate the name(s)of the nodes of the source xsd:I'm not sure If I understood your question.Can you please explain?
Ex: My database schema looks like:
<?xml version = '1.0' encoding = 'UTF-8'?>
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/AssetsPoll" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/AssetsPoll" elementFormDefault="qualified" attributeFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="CountriesCollection" type="CountriesCollection"/>
<xs:complexType name="CountriesCollection">
<xs:sequence>
<xs:element name="Countries" type="Countries" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="Countries">
<xs:sequence>
<xs:element name="countryId">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="countryName" minOccurs="0" nillable="true">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="40"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="regionId" type="xs:decimal" minOccurs="0" nillable="true"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
and the corresponding MFL that I have created gives this output
<?xml version="1.0" encoding="windows-1252"?>
<countriesCollection1>
<Countries>
<counrtyId>counrtyId</counrtyId>
<country_name>country_name</country_name>
<regionId>regionId</regionId>
</Countries>
<Countries>
<counrtyId>counrtyId</counrtyId>
<country_name>country_name</country_name>
<regionId>regionId</regionId>
</Countries>
</countriesCollection1>
Why I am asking this beacuse there is an error that i am getting:
Jun 19, 2009 5:50:50 PM IST> <Error> <JCATransport> <BEA-381951> <JCA inbound r
quest only invocation failed, exception: java.security.PrivilegedActionExceptio
: com.bea.wli.sb.transports.TransportException: Binary to XML mfl transformatio
failed for the MFL Resource Database-Jms-File/Database-File/MFLSample : null
ava.security.PrivilegedActionException: com.bea.wli.sb.transports.TransportExce
tion: Binary to XML mfl transformation failed for the MFL Resource Database-Jms
File/Database-File/MFLSample : null..................................................
Any help?
Regards
PS

Read and write a .CSV file contains cirillic characters issue

Hi guys,
I am a developer of a web application project which uses Oracle Fusion Middleware technologies. We use JDeveloper 11.1.1.4.0 as development IDE.
I have a requirement to get a .csv file from WLS to application running machine. I used a downloadActinLinsener in front end .jspx in order to do that.
I use OpenCSV library to read and write .csv files.
Here is my code for read and write the .csv file,
public void dwdFile(FacesContext facesContext, OutputStream out) {
System.out.println("started");
String [] nextLine;
try {
FileInputStream fstream1 = new FileInputStream("Downloads/filetoberead.CSV");
DataInputStream in = new DataInputStream(fstream1);
BufferedReader br = new BufferedReader(new InputStreamReader(in,"UTF-8"));
CSVReader reader = new CSVReader(br,'\n');
//CSVReader reader = new CSVReader(new FileReader("Downloads/ACTIVITY_LOG_22-JAN-13.csv"),'\n');
List<String> list=new ArrayList();
while ((nextLine = reader.readNext()) != null) {
if(nextLine !=null){
for(String s:nextLine){
list.add(s);
System.out.println("list size ; "+list.size());
OutputStreamWriter w = new OutputStreamWriter(out, "UTF-8");
CSVWriter writer = new CSVWriter(w, ',','\u0000');
for(int i=0;i<list.size();i++){
System.out.println("list items"+list.get(i));
String[] entries = list.get(i).split(",");
writer.writeNext(entries);
//System.out.println("list items : "+list.get(i));
writer.close();
} catch (IOException e) {
e.printStackTrace();
say the filetoberead.CSV contains following data,
0,22012013,E,E,ASG,,O-0000,O,0000,100
1,111211,LI,0,TABO,B,M002500003593,,,К /БЭ60072715/,КАРТЕНБАЙ
2,07,Balance Free,3
1,383708,LI,0,BDSC,B,НЭ63041374,,,Т /НЭ63041374/,ОТГОНБААТАР
2,07,Balance Free,161
It reads and writes the numbers and english characters correct. All cirillic characters it prints "?" as follows,
0,22012013,E,E,ASG,,O-0000,O,0000,100
1,111211,LI,0,TABO,B,M002500003593,,,? /??60072715/,?????????
2,07,Balance Free,3
1,383708,LI,0,BDSC,B,??63041374,,,? /??63041374/,???????????
2,07,Balance Free,161
can somone please help me to resolve this problem?
Regards !
Sameera

Are you sure that the input file (e.g. "Downloads/filetoberead.CSV") is in UTF-8 character set? You can also check it using some text editor having a view in hex mode. If each Cyrillic character in your input file occupies a single byte (instead of two), then the file is not in UTF-8. Most probably it is in Cyrillic for Windows (CP1251).
If this is the case, you should modify the line
BufferedReader br = new BufferedReader(new InputStreamReader(in,"UTF-8"));toBufferedReader br = new BufferedReader(new InputStreamReader(in,"windows-1251"));Dimitar

Updating Database From csv File in Web Dynpro Java

Hi Gurus,
I'd like to write an WDJ where the (super-)user can upload a csv file and delta-update the content of this file witch an external database.
Could you please give some me hints & examples.
Thanks in advance,
Farid
ps. answers will be rewarded with points, of cource.

Hi Farid:
From your question it seems like you want to write a WDJ application which writes a CSV file after connecting to a database and everytime you do so, updates the file with the new record from the DB.
For this, I wouldnt think to write an application in WebDynpro since its an over kill, unless you want to host this appln in a portal environment and want it accessible for a set of people.
Ideally you could use the JDK api to open a connection to the database and then then file api to write to files. You would need to use an identifier somewhere to know the last record read and written to the file.
Incase you put in the type of db you want to connect to, i could be of more help
Thanks,
LioneL

Error: java.lang.OutOfMemoryError when uploading CSV files to web server

Hi experts,
I have made a JSP page from which clients load csv files to web server. I am using Tomca 4.1 as my web server and JDK 1.3.1_09.
The system works fine when uploadiing small csv files, but it crashes when uploading large CSV files.
It gives me the following error:
java.lang.OutOfMemoryError
     <<no stack trace available>>
This is the code that I used to load files....
<%
String saveFile = "";
String contentType = request.getContentType();
if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0))
     DataInputStream in = new DataInputStream(request.getInputStream());
     int formDataLength = request.getContentLength();
     byte dataBytes[] = new byte[formDataLength];
     int byteRead = 0;
     int totalBytesRead = 0;
     while (totalBytesRead < formDataLength)
          byteRead = in.read(dataBytes, totalBytesRead, formDataLength);
          totalBytesRead += byteRead;
     String file = new String(dataBytes);
     saveFile = file.substring(file.indexOf("filename=\"") + 10);
     saveFile = saveFile.substring(0, saveFile.indexOf("\n"));
     saveFile = saveFile.substring(saveFile.lastIndexOf("\\") + 1,saveFile.indexOf("\""));
     int lastIndex = contentType.lastIndexOf("=");
     String boundary = contentType.substring(lastIndex + 1,contentType.length());
     int pos;
     pos = file.indexOf("filename=\"");
     pos = file.indexOf("\n", pos) + 1;
     pos = file.indexOf("\n", pos) + 1;
     pos = file.indexOf("\n", pos) + 1;
     int boundaryLocation = file.indexOf(boundary, pos) - 4;
     int startPos = ((file.substring(0, pos)).getBytes()).length;
     int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length;
     String folder = "f:/Program Files/Apache Group/Tomcat 4.1/webapps/broadcast/file/";
     //String folder = "10.28.12.58/bulksms/";
     FileOutputStream fileOut = new FileOutputStream(folder + saveFile);
     //out.print("Saved here: " + saveFile);
     //fileOut.write(dataBytes);
     fileOut.write(dataBytes, startPos, (endPos - startPos));
     fileOut.flush();
     fileOut.close();
     out.println("File loaded successfully");
//f:/Program Files/Apache Group/Tomcat 4.1/webapps/sms/file/
%>
Please can anyone help me solve this problem for me...
Thanx...
Deepak

I know it may be hard to throw away all this code, but consider using the jakarta fileupload component.
I think it would simplify your code down to
// Create a factory for disk-based file items
FileItemFactory factory = new DiskFileItemFactory();
// Create a new file upload handler
ServletFileUpload upload = new ServletFileUpload(factory);
// Parse the request
List /* FileItem */ items = upload.parseRequest(request);
// Process the uploaded items
Iterator iter = items.iterator();
while (iter.hasNext()) {
    FileItem item = (FileItem) iter.next();
    if (item.isFormField()) {
        processFormField(item);
    } else {
        // item is a file. write it
        File saveFolder = application.getRealPath("/file");
        File uploadedFile = new File(saveFolder, item.getName());
        item.write(uploadedFile);
}Most of this code was hijacked from http://jakarta.apache.org/commons/fileupload/using.html
Check it out. It will solve your memory problem by writing the file to disk temporarily if necessary.
Cheers,
evnafets

Import data from excel/csv file in web dynpro

Hi All,
I need to populate a WD table by first importing a excel/CSV file thru web dynpro screen and then reading thru the file.Am using FileUpload element from NW04s.
How can I read/import data from excel / csv file in web dynpro table context?
Any help is appreciated.
Thanks a lot
Aakash

Hi,
Here are the basic steps needed to read data from excel spreadsheet using the Java Excel API(jExcel API).
jExcel API can read a spreadsheet from a file stored on the local file system or from some input stream, ideally the following should be the steps while reading:
Create a workbook from a file on the local file system, as illustrated in the following code fragment:
          import java.io.File;
          import java.util.Date;
          import jxl.*;
         Workbook workbook = Workbook.getWorkbook(new File("test.xls"));
On getting access to the worksheet, once can use the following code piece to access individual sheets. These are zero indexed - the first sheet being 0, the second sheet being 1, and so on. (You can also use the API to retrieve a sheet by name).
          Sheet sheet = workbook.getSheet(0);
After getting the sheet, you can retrieve the cell's contents as a string by using the convenience method getContents(). In the example code below, A1 is a text cell, B2 is numerical value and C2 is a date. The contents of these cells may be accessed as follows
Cell a1 = sheet.getCell(0,0);
Cell b2 = sheet.getCell(1,1);
Cell c2 = sheet.getCell(2,1);
String a1 = a1.getContents();
String b2 = b2.getContents();
String c2 = c2.getContents();
// perform operations on strings
However in case we need to access the cell's contents as the exact data type ie. as a numerical value or as a date, then the retrieved Cell must be cast to the correct type and the appropriate methods called. The code piece given below illustrates how JExcelApi may be used to retrieve a genuine java double and java.util.Date object from an Excel spreadsheet. For completeness the label is also cast to it's correct type. The code snippet also illustrates how to verify that cell is of the expected type - this can be useful when performing validations on the spreadsheet for presence of correct datatypes in the spreadsheet.
String a1 = null;
Double b2 = 0;
Date c2 = null;
                    Cell a1 = sheet.getCell(0,0);
                    Cell b2 = sheet.getCell(1,1);
                    Cell c2 = sheet.getCell(2,1);
                    if (a1.getType() == CellType.LABEL)
                       LabelCell lc = (LabelCell) a1;
                       stringa1 = lc.getString();
                     if (b2.getType() == CellType.NUMBER)
                       NumberCell nc = (NumberCell) b2;
                       numberb2 = nc.getValue();
                      if (c2.getType() == CellType.DATE)
                        DateCell dc = (DateCell) c2;
                        datec2 = dc.getDate();
                       // operate on dates and doubles
It is recommended to, use the close() method (as in the code piece below)   when you are done with processing all the cells.This frees up any allocated memory used when reading spreadsheets and is particularly important when reading large spreadsheets.
          // Finished - close the workbook and free up memory
          workbook.close();
The API class files are availble in the 'jxl.jar', which is available for download.
Regards
Raghu

To read & save data from serial port (write to .csv file), and plot data as waveform

Hi,
I've been stuck with this problem for weeks and really need some help. I've been searching a lot but I can't find a proper solution.
I am trying to use Labview to plot and display some parameters of a data acquisition system for a project.
The data acquisition system is connected to a computer via serial connection through COM 1 port.
The data acquisition system sends a serial stream of data (ASCII string with baud rate 19200), as shown below (from HyperTerminal),
01:00:26,933.24,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
01:00:27,931.54,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
The serial data stream consists of a time stamp (as 1st data), followed by 16 individual channel data, separated by comma "," and each stream ending in return "\n". Each value of the data ranges from 1 to 6 digits (value of -5000 to 15000).
I have no problem reading this values correctly using HyperTerminal, but I have problem to plot and display individual parameters of this serial string in Labview. I want to save the entire data in a “.csv” file corresponding to all the 16 channels with time stamp and plot each individual channel parameter in a graph with time on X-axis.
I am relatively new to Labview hope I can learn a lot from your help.
　Thank you

Thank you Dennis.........
Now I had modified the program incorporating1D array for gauge display.....but currently I have a new problem. The program is running updating the file, waveform graph and Gauge very slowly. Approximately once in every 15 seconds 16 data streams are getting updated in a bunch with gauge sticking to the last value rather than indicating real time value.
eg.
12:33:41,-3728.78,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:42,-3730.47,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:43,-3729.81,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:44,-3733.80,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:45,-3733.57,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:46,-3729.27,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:47,-3725.97,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:48,-3730.14,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:49,-3733.20,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:50,-3733.60,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:51,-3732.24,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:52,-3734.51,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:53,-3728.07,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:54,-3732.54,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:55,-3732.24,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
12:33:56,-3731.58,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,
gets updated in a bunch after 15 seconds, rather than in every second. I thought the problem is with while loop but, i realised there is no delay associated with it..... Can u kindly help me in modifing the program so as it can update the waveform, file data and gauge in real time? (I have attached the modified VI file "suitcase new.vi" and the data gathered after executing the same as in "Trail.txt".)
Thank You,
Rahul
Attachments:
trail.txt ‏85 KB
suitcase new.vi ‏44 KB

How to get sql query data and write into csv file?

I am writing to seek help, in how can I create bat. script which can execute the following logic:
connection to the database
run sql query
create CSV file
output query data, into CSV file
save the CSV file
osql
-S 84.18.111.111
-U adw
-P rem
-i "c:\query.sql"
send ""
sed -e 's/,\s\+/,/g' MCI_04Dec2014.csv > localNoSpaces.csv
-o "c:\MCI_04Dec2014.csv"
This what i have so far, and I am little struggling with the logic after creating CSV file. I am unable to get the above script to work, please advice further, where I may be going wrong.
Can you create if statement logic within window's script, to check for null parameters or data feeds?
Any hints would be most appreciated.

Thank you for your reply.
Apology for posting the code irrelevant to the forum, as I am still novice scripting user.
My goal is to create window's script which can compute the above logic and send the final output file (csv), to FTP folder.
Can this logic be implemented via bat. script, if so, is there a example or tutorial i could follow, in order to achieve my task.
Any help would be much appreciated.

Have file save dialog configure csv file type

I am saving a program recipe file in csv format.
I can save and retrieve the file without problems.
What I would like to do is have the save file dialog box show a file type of *.csv instead of the default all file types *.* and then depend on the user to enter file.csv
Does anyone know a way to do this programitically?
Solved!
Go to Solution.

Hi Clark,
the FileDialog has some "pattern label" inputs. Have you used them or read the context help for that function?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Table unable to read data from CSV file

Dear All,
I have created a table which have to read data from external CSV file. The table is giving error if the file is not there at the specified location,but when i put the file at that location there is no error but no rows are returned.
Please suggest what should i do???
Thanks in advance.

No version.
No operating system information.
No DDL.
No help is possible.
I want to drive home the point here to the many people that write posts similar to yours.
"My car won't start please tell me why" is insuffiicent information. Perhaps it is out of gas. Perhaps the battery is dead. Perhaps you didn't turn the key in the ignition.

Unable to save ANY types of files in Elements 5.0

Today I was working with Elements, creating a photomanipulation. This involved several layers, including a background of a beach, a horse, and some text. I've done this before with this exact same program on this exact same computer and not had too many problems. But not today.
Today when I try to save my creation, in ANY format, I get this message:
Could not save as
"C:\Users\User\...\Untitled-1.jpg" because the file is already in use or was left open.
GAHH!!!! Well of COURSE the stupid file is open, I'm working ON IT and trying to save my work!!! If I try to close the file, I get the standard question:
Save changes to the Adobe Photoshop Elements document "Untitled-1" before closing?
to which if I say yes, I get the same old crap:
Could not save as
"C:\Users\User\...\Untitled-1.jpg" because the file is already in use or was left open.
Now if I select save as *PSD or *PDD, *SOMETIMES* it acts like it has saved my work, (Instead of just saying it can't) but when I look for what I saved, all I find are a bunch of crap files that can't be opened. Example:
Cannot open 'C:\Users]User\Pictures\Photo Manips\~ps2AA0.tmp' because it is the wrong type of file.
Please note that I never actually chose to save ANY files called ~ps2aa0.tmp at any point in this process.
So I am stuck in a vicious cycle where before everything was working just fine. And it's not just editing photos or doing manipulations. I can take a brand new blank canvas, scribble a line on it with a paintbrush, and I am completely and totally unable to save even the simplest thing in ANY format whatsoever.
I tried uninstalling Elements and reinstalling it and that did absolutely nothing, except cause me to lose all the special effect brushes I spent hours downloading. And when I started it back up, I was right where I was before, it even had the same custom color preloaded on the palette, as if it did not truly uninstall AT ALL. (Just the special brushes were missing, thanks for nothing!)
My computer is maybe 8 months old now, a nice Hewlitt Packard with Vista. I specifically bought this computer so I could do more things with my art and more photos, and the first thing I loaded on it was the Bamboo tablet by Wacom, which came with Photoshop Elements 5.0 free. I've been using it ever since with hardly a problem and now today, I can't save the simplest little thing, and it is really aggravating me to death.
ANY light that anyone could shed on this would be most appreciated. I'm sure it's something extremely stupid, like I found the secret invisible "do not save anything ever again" button and somehow managed to press it. Whatever it is, I can not for the life of me figure out how to make it work like it's SUPPOSED to work. Somebody please help me before I go stark raving mad.

Further note: I have uninstalled this stupid program now THREE different times, including using a registry cleaner, which then deleted my DVD drive, thankyouverymuch. And even after I got the DVD drive back so I could reinstall the program, it was like I'd never uninstalled it (with the exception of the custom brushes still being missing) right down to the canvas size and paint color I had been using when all this started.
So uninstalling it does nothing, resetting preferences does nothing... I can not save my work, period. I've been fighting with this for about 8 hours and I am so frustrated I could just throttle someone with my bare hands for putting me through this crap.
For a product that came bundled with a $200 graphics tablet, it sure isn't worth a damn. Anybody got any ideas? I'm at my wits' end here.

Can any version of Excel save to a CSV file that is either UTF-8 or UTF-16 encoded (unicode)?

Are there any versions of Excel (chinese, japanese, russian... 2003, 2007, 2010...) that can save CSV files in Unicode (either UTF-8 or UTF-16)?
If not, is the only solution to go with tab-delimited files (save as Unicode-text option)?

Hi Mark,
I have the same problem. Trying to save my CSV file in UTF8 encoding. After several hours in searching and trying this also in my VSTO Add-In I got nothing. Saving file as Unicode option in Excel creates file as TAB separated. Because I'd like to save the
file in my Add-In application, the best to do is (for my problem) saving file as unicode tab delimited and then replacing all tabs with commas in the file automatically.
I don't think there is a direct way to save CSV as unicode in Excel. And I don't understand why.

How to write to csv file - Whats wrong with this???

Hi ALL,
I created a view that does all sorts of calculations, now I need to write the output in csv file. How do I do this thru a procedure? Sorry I've never had to create a csv file before and this is my first time.
Thanks!
Edited by: user5737516 on Nov 18, 2009 9:47 AM

What is wrong with this?? Am I supposed to do something else before I could run this?
CREATE OR REPLACE DIRECTORY PAYROLL as 'c:\';
Directory created.
grant read, write on directory PAYROLL to my_user;
Grant succeeded.
CREATE OR REPLACE PROCEDURE baninst1.PAY_CSV(p_year NUMBER, p_qtr NUMBER) AS
CURSOR c_data IS
    SELECT pay_period,
           pay_group,
           p_qtr,
           check_date,
           SUM(soc_sec_gross) as SOC_SEC_GROSS,
           SUM(medicare_gross) as MEDICARE_GROSS,
           SUM(TOTAL_DEDUCTIONS) as Total_Deductions,
           SUM(NET_PAY) as Net_Pay
    FROM   baninst1.pzvdedn
    WHERE pay_year = p_year
    AND        p_qtr = p_qtr
    GROUP BY pay_period, pay_group, check_date, pay_qtr
    ORDER BY pay_period, pay_group, check_date, pay_qtr;
v_file UTL_FILE.FILE_TYPE;
BEGIN
v_file := UTL_FILE.FOPEN('PAYROLL',
                           'pay_csv.csv',
                           'w',
                           max_linesize => 32767);
FOR cur_rec IN c_data LOOP
    UTL_FILE.PUT_LINE(v_file,
                      cur_rec.pay_period    || ',' ||
                      cur_rec.pay_group    || ',' ||
                      cur_rec.check_date     || ',' ||
                      cur_rec.soc_sec_gross      || ',' ||
                      cur_rec.medicare_gross || ',' ||
                      cur_rec.total_deductions    || ',' ||
                      cur_rec.net_pay);
END LOOP;
UTL_FILE.FCLOSE(v_file);
EXCEPTION
WHEN OTHERS THEN
    UTL_FILE.FCLOSE(v_file);
END;
Procedure created.
SQL> exec baninst1.PAY_CSV(2009,1);
BEGIN baninst1.PAY_CSV(2009,1); END;
ERROR at line 1:
ORA-20003: File could not be opened or operated on as requested.
ORA-06512: at "BANINST1.PAY_CSV", line 45
ORA-06512: at line 1Edited by: user5737516 on Nov 18, 2009 9:16 AM
Edited by: user5737516 on Nov 18, 2009 9:18 AM
Edited by: user5737516 on Nov 18, 2009 9:20 AM
Edited by: user5737516 on Nov 18, 2009 9:35 AM

Unable to save/write a CSV file to web portal

Similar Messages

Maybe you are looking for