Unable to see BCC list in Sent Item

I have Outlook 2013 in Windows 7 Pro. I have sent a number of messages addressed to multiple addressees in the BCC field. However, when I open the Sent email, I am unable to see the BCC field and the addressees. I know they have received the message. Double
clicking the message doesn't help. How can I see the list of addressees?

Hi,
Do you have other accounts configured in Outlook? If yes, do they display the Bcc field?
As Diane mentioned in the earlier post, please add Bcc column in the VIEW and check if the Bcc information is stored by your account:
Open the Sent Items folder, go to VIEW tab -> Current View -> Change View -> Select "Preview".
Then right click on the top bar of the email list, select "Field Chooser", choose "Address fields" in the dropbox, and drag "Bcc" to the top bar.
If the Bcc information was actually stored, you will find the "Bcc" information in the column. If you don't even find the Bcc information under that column, it seems that your account type doesn't store the Bcc information, it happens with some
account types.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

I am unable to see bcc addresses in sent message

bcc addresses do not show in Mail sent messages. Recommended solutions from other posts have not solved the issue.

I have the same problem. It was working before. I sent a message with addresses in BCC in November, and I can still see those addresses. I sent one this week and I cannot see any.
I sent one email without any address in the TO just a bucnh of addresses in BCC. I can see only one of the addresses in the BCC, and it is not even the first one in the list.
After I updated to Mail 7.2 I tested it again. The previous emails were sent using a gmail account (IMAP). I tested with the same gmail account and another non-gmail IMAP account. Now I can see the BCC addresses in the gmail but not the other.
It seem sto be erratic and frustrating.

In Apple mail, the attachment symbol does not appear in the list of sent items

In Apple mail, the attachment symbol does not appear in the list of sent items. So you cannot sort sent emails based on whether or not they have an attachment. Is there a way to fix this?

I think my question wasn't clear. I know how to display the attachment header (I use classic layout) but the problem is that the paperclip icon does not appear against the messages that contain attachments. See screenshot below. The attachment column is displayed but is blank. These are my sent items and I know for a fact that most of them have attachments. Can you help?

Unable to see field list in Excel 2013

Unable to see a list of fields to choose from when creating a pivot table. I only see the field table.
I have tried this ActiveWorkbook.ShowPivotTableFieldList =True and received the following message
We found a problem with this formula, We couldn't find a range reference or a defined name.

Hi,
Did the issue occur in the special file or all the Excel 2013 file?
If the issue occur in the special file, it might be caused by the file self, I recommend you copy/paste it to a new/blank file to test.
If the issue occur in all the Excel 2013 file, it might be caused by the Excel15.xlb corrupted. It is located in your Windows user profile which varies with OS (Documents and Settings or Users).
C:\Documents and Settings\Username\Application Data\Microsoft\Excel
C:\Users\UserName\AppData\Roaming\Microsoft\Excel.
Rename the file (Please note: If you don't backup it, you will lose any custom settings you may have made for Excel.) and then Excel will recreate it the next time Excel is opened.
If the issue still exists, please try to share us a sample file through One Drive, I want to test it.
Regards,
George Zhao
TechNet Community Support

I am unable to see Object list selector in SE80 TCode in SAP 4.7

I am unable to see Object list selector in SE80 TCode in SAP 4.7. i'll be thankful if someone can help me out in this regards.
Thanks in Avd.
Edited by: Azeez Azam on Aug 30, 2010 2:14 PM

If you are still experiencing problems after checking your settings, you may need to update your SAP GUI patch. This solved my problem when I couldn't see the object list selector.

AHow long does the Cloud hold info on the calendar? I am unable to see appointments listed on calendar in previous calendar year. Is there a way to access those appointments or should I have printed them at the end of each calendar year?

How long does the Cloud hold info on the iPad2 calendar? I am unable to see appointments listed for previous year (2011). Is there a way to access these appointments? If so, how would I do it? Or should I have printed a hard copy for my record keeping?

> How long does the Cloud hold info on the iPad2 calendar?
As far back as you tell it to in Settings > Mail, Contacts, Calendars > [Scroll down to Calendars] > Sync > [Choose how far back to sync]

Content editor webpart- unable to see the list data if given the url in the content link?

HI,
In content editor webpart,unable to see the list data
when try to give the list url in the content link?
please help on the above issue.
and also want to see the styles to the list.
how to add the styles to the list row by row.

Hi sudhir,
If you click the ellipsis beside the content link, it will pop up a window for you to input the file link. No list option will be offered to be chose.
When I add a content editor web part to a list, I usually save the code into a Notepad file and save it to a document library. Then copy the url of the document and then paste it into content link.
Also, you could click Edit HTML Source, then directly add code into the popup window. It works as the same as the above method.
Regards,
Rebecca Tu
TechNet Community Support

TS3899 I have upgrade my to iOS7 and my company recently upgrade to Exchange 2010. My emails are not synching to my inbox. I can see all of my sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

I have upgrade my phone to iOS7 and my company recently upgraded to Exchange 2010. My emails are not synching to my inbox. I can only see my Sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

You need to have a different Apple ID for each of the other devices.

How to see bcc recipients in sent mail, AppleMail 5.3?

Cannot locate the list of hidden recipients under "sent" mail in Applemail 5.3. When I go to "View," and go to "message," there is no option that will call up the list of "bcc" recipients. How can I check a recipient list if one that I used when sending an email remains hidden?

Wish I could be king. But you described the problem perfectly and I am still but a pawn. All I can say is that I trashed the mail preferences (com.apple.mail.plist) on my Mac Mini, and now my MacBook seems to work right.
Sorry. :>) But that is the truth... The MacBook now has actually sometimes displayed pasted text in its actual, different, font and style as I paste it into a partially composed new mail message.
In other (more rational) words, the problem seems to be tied to pasting only certain types of text. I have not been able yet to pinpoint what. Yes, frustrating indeed. The only work-around has been to re-train my fingers to command-option-shift V, for "paste and match style" (like you, I do not want to always use only plain text). Maybe someone else will eventually weigh in with a real solution. The solution I want is just to be able to consistently see any font variations within my message before I send the email.
The info about the different ppi scales between Windows and Mac is interesting, although not relevant to this particular problem. It does explain the apparent overall size differences I have seen before.

Unable to see company list in client

Hello,
I have a server running SAP B1 8.8 PL5 with SQL2005. I do not see the company list from the client. I see the SBODemoUS database on SQL server. How can I get the company to show up in the client?
Thanks and Regards,
Sheetal

Hello, one assumption, you did not specify the connection values for SBO 8.8
Run SAP B1 Service Manager
- Select Service for license Manager
- Button Settings, a new dialog "general settings" shows up.
- There you will find another button "configure security"
- Using this button you will be asked for the valid password for the B1SiteUser
(when installing B1 8.8 you have specifiy this password)
Press OK
- After successful entry of the password you see another dialog.
--> Connection Settings
--> Here you specify the correct connection parameter for normal users.
Keep in mind that security options changed in SBO 8.8, in before you specified connection parameters on the client, now, in 8.8 these connection parameters are provided by SBO.
Hope it helps
Kind Regards

Unable to see files in iTunes File Sharing

I'm using the latest version of iTunes, and have both an iPad and iPad2, both fully upto date with the latest version of IOS. Everything I now write about applies to both iPads.
Basically, I'm unable to see files that are sent to iTunes from the iPad. The ipad is connected to the PC, I select the file I want to send from the appropriate app, and then "send to iTunes". The file never appears under the app that sent if from the file sharing section of the device in iTunes. Even forcing another sync doesn't help either.
Here's the strange thing, if I unplug the iPad, then reconnect it, go back to file sharing page in iTunes, and click on the appropriate app, the files show. However, if I click onto another app in the file sharing list and back to the original one, the files have disappeared.
By way of example:
I connect my iPad to iTunes, after it automatically syncs, I select the iPad, choose the apps menu and scroll down to the file sharing window.
On my iPad, I open Pages, select a document and send it to iTunes.
Back on my PC, the file doesn't show under the Pages app in the file sharing window.
I resync the iPad, still no change.
I disconnect the iPad, reconnect and let it automatically sync again.
I navigate back to the file sharing section and click on the Pages app. Low and behold, the file is now showing.
I click onto any other app that is listed in the file sharing section, then click back to the Pages app. The file no longer shows.
It will remain like that until I unplug the ipad, and connect/sync again.
Exactly the same thing will happen regardless of which app I choose that supports file sending to iTunes.
Finally, just to confuse matters further, the reverse is also true. Adding a file to the file sharing section doesn't appear in the list, and the iPad can't see it - until I unplug and reconnect again. After that, same issues happen as already described.
Any assistance would be appreciated.

This is a bug in the Windows version of iTunes which I reported to Apple nearly a year ago (back when iTunes 10 came out), but they refuse to fix. I see the problem with my iPhone 3GS and iPad 2.
Basically file sharing stops working if you click on more than two or three apps in the file sharing list. The work around is to disconnect the iOS device and reconnect it. Then make sure to click only the app you want to transfer to/from. If the document list goes blank, disconnect and reconnect again.
It's really annoying and I wish Apple would fix it. Supposedly it was also broken for the Mac version of iTunes and was quickly fixed there, but not for Windows.

GoDaddy IMAP issue with "Sent Items"

There's some long standing issues with GoDaddy IMAP and Apple Mail. GoDaddy is using Courier-IMAP 3.1.0.5. The worst of the issues seems to be the fact that if you store your Sent Items on the Server, your log gets spammed with these two message (I'm removed the call stack) over and over and it also seems to degrade performance while Mail tries to traverse the folder hierarchy even though on the surface everything seems to be working. Mail is spending an inordinate amount of time trying to create this "Sent_Items" mailbox and then failing... over and over...
Aug 11 09:32:04 seven Mail[9613]: *** Assertion failure in -[IMAPAccount _IMAPMailboxForMailboxUid:name:createIfNeeded:], /SourceCache/Message/Message-1244.3/Accounts.subproj/IMAPAccount.m:1336
Expected mailboxUid for Sent_Items
Aug 11 09:32:04 seven Mail[9613]: *** Assertion failure in -[IMAPAccount _IMAPMailboxForMailboxUid:name:createIfNeeded:], /SourceCache/Message/Message-1244.3/Accounts.subproj/IMAPAccount.m:1344
Didn't create IMAPMailbox for (null)
Seems to me the reason this is happening has something to do with the fact that the "Sent Items" system folder is internally referenced as "Sent_Items" and they are being treated as synonyms for each other on the IMAP side while Apple Mail is seeing them as 2 different folders and failing when it thinks it needs to create the Sent_Items folder on the server.
I'm willing to accept that I could be completely wrong about this, or I could be right, but neither GoDaddy or Apple side seems interested in looking into it and it's very frustrating. Here's why I think it might have something to do with it:
[ben@seven][~]$ telnet imap.secureserver.net 143
Trying 72.167.82.19...
Connected to imap.where.secureserver.net.
Escape character is '^]'.
* OK [CAPABILITY IMAP4rev1 UNSELECT STARTTLS ID CHILDREN NAMESPACE IDLE] Courier-IMAP ready. Copyright 1998-2004 Double Precision, Inc. See COPYING for distribution information.
1 LOGIN [email protected] password
1 OK LOGIN Ok.
2 LIST "*" "*"
* LIST (\NoInferiors) "/" "INBOX"
* LIST (\NoInferiors) "/" "Bulk Mail"
* LIST (\NoInferiors) "/" "Drafts"
* LIST (\HasNoChildren) "/" "Email_Templates"
* LIST (\NoInferiors) "/" "Send_Later"
* LIST (\NoInferiors) "/" "Sent Items"
* LIST (\NoInferiors) "/" "Trash"
2 OK Success
3 STATUS "Sent Items" (UIDVALIDITY)
* STATUS "Sent_Items" (UIDVALIDITY 1109891090)
3 OK STATUS completed.
4 STATUS "Sent_Items" (UIDVALIDITY)
* STATUS "Sent_Items" (UIDVALIDITY 1109891090)
4 OK STATUS completed.
5 LOGOUT
* BYE IMAP server shutting down
5 OK LOGOUT completed
Connection closed by foreign host.
If you login to the GoDaddy webmail system and bring up the properties of the "Sent Items" folder, it's referenced as "INBOX.Sent_Items" and it's the only folder whose internal name doesn't match the name given in the LIST command.
I really wish that someone from Apple or someone from GoDaddy would take a look at this seemingly simple thing to fix and just make it work. It appears to not be an issue for other IMAP clients, or on the iOS devices, though I suppose that my iPhone could be logging all this same stuff internally.
Hopefully GoDaddyGuy will come to the rescue once again and get this resolved. If anyone has been able to actually store their Sent Items in the Sent Items system folder and not get this message over and over, let me know. This has nothing to do with the IDLE command or "Use this mailbox for..." or IMAP prefix (which if you run the NAMESPACE command isn't defined) or any other suggestions that have been given previously. I've already exhausted all the different combinations.
Sincerely,
Ben Morin
CTO
Sevence, LLC

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Unable to see data in Table in smartform

Hi all,
I need to create a smartform where I have to print the header details at the start and then below that details for all line items for a particular document.
so i have data ;ike :
Header data :
field 1 : field 2:
Field3 : field4:
field5: field6:
Item data :
field1 field2 field3 field4 --> Item 1
field1 field2 field3 field4 -->Item 2
field 1 field2 field3 field4 -->Item3
For the Header data,Im planning to use a template in a secondary window.
However for the item data,i need to use a table (As i know the no of records only at runtime).Also another reason for usng table would be that I dont need the header on each flloowing page but only the Line item details on the following pages.
Now my ques is :
1.I hav ecreated the form and put some constant /texts to just test the form.I am able to see the texts/data in the header data.However Im unable to see the data for the Item i.e. in the TABLE.
I have used template for Header details which I can see.
I dont know what Im doing wrong.Is it because in the DATA tab under TABLES,I have given an interna table but there is no data in the table?
I have defined only 1 line type in my table an dthat has 4 cells (as I need to print 4 item fields under the Item data)
PLease let me know what I am doig wrong because of which Im unable to see the item data in table form.
Thanks!

Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks

Group Owner unable to see members

Hello All,
I posted this question a while back but never got an answer so I thought I'd repost it. I've run into an issue where when a security group owner logs into the FIM portal they see the groups they are managing but are unable to see a list of
members of the group. However when I log in as an FIM administration and I look at the same group I see all members. How do I allow the group owner to manage his own group by granting him access to read the membership. Is there a specific Search Scope or MPR
that needs to be enabled besides the following.
MPR's that are enabled
Security group management: Owners can read selected attributes of group resources
Security group management: Owners can update and delete groups they own
Navigation Bar Resources that are enabled as BasicUI
Security Groups (SG's)
My SGs
My SG Memberships
Home Page Resources that are enabled as BasicUI
Security Groups (SG's)
My SGs
My SG Memberships
Search Scopes that have BasicUI
My Security Groups
My SG Memberships

Default values here:
Half-seen attributes are: Manager; MiddleName; Mobile Phone; Time Zone
Is this user a part of this group as well? If so maybe try to enable MPR named User management: Users can read attributes of their own
also?
Another way to check what should be enabled is:
In Management Policy Rules view, click Explore.
On Find tab, leave first option selected.
On Criteria tab, select: Read resource, Only permission granting...; Include disabled ...; Requestor: owner. Target Resource: group
Check MPRs listed and check which of them are disabled :)
Security group management: Owners can read selected attributes of group resources
Security group management: Users can read selected attributes of group resources
Group management: Group administrators can read attributes of group resources
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Sent items on Blackberry

Hi,
Can anyone help.
I have a Blackberry Torch and cannot see or synchronise any sent items that were sent from BT Yahoo Mail as they do not show on the blackberry.I have spoken to BT but they are not very forthcoming on this issue.
Many thanks
Nick

Make sure that the e-mail account on the phone is setup to use IMAP, and not POP3. IMAP enables folder synch.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Unable to see BCC list in Sent Item

Similar Messages

Maybe you are looking for