Unable to set FMBB Layout  and fix Distribution Key

Hi Gurs
        Subject :  ECC 6.00  Fund Management BCS configuration & Issue in Layout for FMBB  - reg.
While giving Budget in FMBB,  it askes Distribution Key ( DK ). Then  I selected SAP standard DK No 1 for "Equal Distribution".
When i save the budget- in FMBB, the Distribution Key coloumn is vanished.   I am advised to check the Layout to rectify it.
Now I  have been trying to set the LAY OUT with Menu Bar ->  EXTRAS -> CHANGE  BUDGETING WORKBENCH LAYOUT.
There are  5 Lay out.
Whatever lay out selected,  that DK is vanished while save FMBB.
Klyy  advice and correct me ...
regs /  Devi aparna

Hi Alex Ice,
Applied  notes as specified by you..
Now, in Layout "FMLA"  put the Distribution Key as  7  ( ie. DK 7 stands for Distribution the budget as per dates of period )
Which is available in FMBB.   ok.
In FMBB, I have been trying to select " All " in order to distribute the all the 12 period.
But, it takes the period of 2 and is not distributing the budget for all period.  ( Remember i selected the " Auto Release" ) .
Don't know where  i missed out the settings.   Kly  guide to proceed further....
regs / Devi Aparna

Similar Messages

  • Unable to set network time and date

    My Applet TV2 is unable to set the network time and date making it so I cannot login to my itunes account so not Netflix or anything making it pointless. I have tried adjusting my router settings (although I've used the same router for over and year and this just started randomly) I have ensured Port's 123 are open, I've restored the ATV2 4 times and have reset my router. I've seen links showing how to use SSh to set the time but I'm unsure if that will work. Any help is appreciated as I'm at a loss at this point

    Welcome to the Apple Community.
    Of the things I've seen work for people in the community you seem to have done most of them, but did you try these.
    Restart Apple TV by removing ALL the cables for a moment or two.
    Ensure that the DNS address's used by the Apple TV and the router are the same and are the address recommended by your ISP.

  • Unable to set up,syn and charge

    unaable to set  up,syn and charge i touch 8gb

    If the iPod does not appear in itunes on yur computer see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    If the iPod is "dead" see:
    iPod touch: Hardware troubleshooting

  • [CLOSED] Unable to set keyboard layout from /etc/X11/xorg.conf.d/

    This is my /etc/X11/xorg.conf.d/10-keyboard.conf:
    Section "InputClass"
    Identifier "keyboard-layout"
    MatchIsKeyboard "on"
    Option "XkbLayout" "cz,us"
    Option "XkbOptions" "grp:alt_shift_toggle"
    EndSection
    I wrote the according to the wiki recommendations, but it doesn't work. Issuing setxkbmap -layout "cz,us" -option "grp:alt_shift_toggle" automatically after logging in serves as a temporary solution, but I'm highly interested in fixing the primary issue. I would greatly appreciate if someone helped my find the error in my config file and/or posted their way to change the xorg keyboard layout in order to compare it with my way and find the error. Also note that I'm using Awesome WM so desktop environment ways of setting the keyboard layout aren't applicable in my case.
    Last edited by C5OK5Y (2012-12-28 15:01:25)

    @chris_l: Thank you for your /etc/X11/xorg.conf.d/01-keyboard-layout.conf.
    I have found out that the actual problem isn't in the configuration file but in the actual keyboard (more accurately xorg) - the keyboard gets incorrectly identified and xorg seems to think that it's a pointer (mouse). When I connect a different keyboard, the layout gets set correctly, xorg just isn't setting the keyboard layout correctly to the keyboard that I use. I have filed a bug report so this thread can be considered closed.
    Last edited by C5OK5Y (2012-12-29 12:58:44)

  • Set Finder Layout and Size - Silly Question

    Hi Guys and Happy Late Valentine's Day!
    I have a really easy question regarding the size of the finder window. Every time I open a new window in the Finder, it is too small for my liking, so I have to resize it. Do you know how I can set a size for the window so that every time I open Finder, it is the size of my liking?
    ~Christoph

    You are right, that is exactly what happens. Unfortunately, this is how Leopard works. I personally liked the pre-leopard versions of Finder windowing. Sizes, position and views stuck. I have actually never really used the Finder icon for opening a new window. I'm a big fan of keyboard commands. Alt-Tab to switch between applications, in Finder: Command-N for new window, Command-Shift-A for the Applications window, Command-Shift-H for your home folder etc. With keyboard shortcuts, the windowing behavior will work like you want it to.
    There is no 'fix' for this, since this is how Finder is supposed to work. There might be a setting somewhere deep in the Finder application itself to change the default size. I don't know where it would be though.
    Sorry, I can't help any further. Maybe someone else will post on my idea in the last paragraph.
    D.

  • Unable to set default layout variant in POWL

    Hi Experts
    We have performed below activity in POWL_QUERY to assign default layout variant.
      1.  Choose Layout variant.
      2.  A browser window for the POWL_MASTER_QUERY appears.
      3.  Change the sap-config-mode from "X" to "config" within the URL.
      4.  Now you can define your layout variant and save your changes.
      5.  Log on to the Customizing client and start transaction POWL_QUERY.
      6.  Assign your created layout variant in the Layout selection field.
    But Still I am not able to see selected layout.
    I am using NWBC 4.0 and  NW - 7.02.
    Please advice.
    Regards,
    Yogesh

    Hi!
              We have same problem!
             The layout can be selected in application, but it is not taken as default.
         We appreciate your feedback
    Best Regards.
    Angelica

  • Does setting multi currency and fixed foreign currency make a difference ?

    Hi all,
    My customer deals in foreign currency say USD, where as local currency is INR.
    Now I want to know that what all difference SBO will make if in one scenario I set the Inventory GLs currency as Multi currency and in second scenario I set the Inventory GLs currency as USD ?
    Regards,
    Samir Gandhi

    Hi Samir,
    in essence, an account/BP that is set up as multicurrency (MC) is local currency (LC) in disguise. All transactions are held in the application in LC, the display is merely informational according to the exchange rate defined for the posting date. The reconciliation currency is LC.
    A foreign currency (FC) account/BP will only accept transactions in this FC. The LC equivalent is automatically calculated, but the reconciliation currency is FC. Exchange rate differences are used to adjust LC according to the rate at the execution date.
    If you use a particular bank account for trading with a particular foreign country, the account currency & the BP currency should be set to a single FC. If a particular bank account is used to deal with various BPs using various currencies, that account should be set up as MC, yet we would recommend you set the BP as single FC.
    There are some relevant Expert Empowerment Sessions available in the archive:
    [Exchange Rate|http://service.sap.com/~sapidb/011000358700000315572008E.zip]
    [FC & SC are the same, why don't they match?|http://service.sap.com/~sapidb/011000358700000326672008E.zip]
    Also, please have a look at the Expert on Phone Newsletter May2008:
    [How to reconcile a foreign currency only journal entry for a multi-currency Business Partner|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=25494259]
    All the best,
    Kerstin

  • Why do users get "unable to set template properties" message?

    Hi there,
    I am trying to administer a new site that was created with DW and has a .dwt (Templates/ locatedat the site root). I'm creating "Publisher" role connection keys so users can edit their subsections of the site. Users should be able to modify template properties when they edit/create new pages.
    While testing the keys, the users report that they can connect and edit pages. However, when they try to modify template properties on either a new or existing page, they get this message "Unable to set template properties" and are prevented.
    I've tried redefining the site and starting all over, tried CS3 vs. CS4 to see if it was a compatibility issue, looked at forum after forum but can't find any answers. I am experienced with DW but new to Contribute administration so I don't know what else to try. Hoping that someone will have encountered this before and can suggest a solution.
    Thanks in advance!
    ps- Let me know if there's other info I can provide to help troubleshoot.

    I did find this April 9, 2009 post from majtom2grndctrl that suggests the issue is how contribute treats https:// sites. My site is set up as majtom2grndctrl described and I am having the same problem.
    "I've got a problem with not being able to edit Template Properties on our test sites we host on HTTPS servers. I've narrowed down the problem to Contribute CS4 ignoring the website root configuration when it looks for the Templates folder. For example, say you have a site hosted at the following address:
    https://www.yourdomain.com/yourfolder/
    Contribute is configured to know your site is in /yourfolder/, but for whatever reason, when you open or create a page, and Contribute reads the InstanceBegin template="/Templates/file.dwt" tag at the beginning of HTML documents, it looks for a Templates folder at the HTTP server root, not in /yourfolder/. This prevents Contribute from loading the template while editing a document, and any attempt to edit Template Properties will yield the infamous "Unable to set template properties" dialog box."

  • I am unable to control page up and page down in JdbTextField

    I am unable to control page up and page down keys in JdbTextField if I press these keys in that field, above that I have one table(jdbTable) the focus going to the table through the rows and when I page up/down.

    If you close all the windows and quit word, next time you restart, DO NOT check "Reopen windows on login".
    Also, check your login items for your user account.

  • Wrong distribution key in profit center planning 7KE1

    I have entered the profit center budget in Transaction 7KE1 for profit centet and account using appropriate profile and layout. 
    The distribution key appearing is "2" however the cost distribution is as per distribution key "1" (equal distribution).   Even we tried to change the distribution key from 2 to 1, sap is not saving this changes and shows "2".
    Following is our profile configuration"
    Planning Area            currency distribution key    Qty distribution key             Doc type
    Costs/Revenue                            01                                   01                               PO 
    Statistical Key Figures                 02                                   02                               PO 
    Inventories                                   02                                   02                               PO 
    Distribution key filed is there in planning layout. There is no other place default distribution key.  Overwrite field is selected in layout.
    Please send reply why this is happening.
    Thanks,
    abhay

    Hello,
    The following example is given for cost center planning. However, you can go to Profit Center ==> Planning. Remaining are same except 7KE1. If you configure in this way, you can upload the plan data through excel for profit center.
    This is controlled by planning are in your planning profile. You need to use "Cost ctrs: Cost element/activity inputs" planning area for this purpose.
    Hope you are conversant with Integrated excel upload.
    To do integrated excel upload of cost center plan data.
    IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Manual Planning User Defined Layouts - Create your own layout or copy from standard layout and change it.
    IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Define User Defined Planner Profiles
    Copy the SAPALL to ZSAPALL. You cannot change SAPALL as it is standard.
    In ZSAPALL planner profile, select proper planning area and enter your layout.
    Tick Integrate Excel.
    Once the popup for KP06 comes, you need enter the data and save it. It would generate the file name.
    With the same file name you need upload the plan data by using KP06.
    In KP06
    Extras ==> Excel Planning ==> Upload
    Select the file as prepared in accordance with format at the time of generating the file name.
    Hope this solves your problem.
    Please let me know if you need futher help.
    Regards,
    Ravi

  • Remap Left and Right Command Keys as Different Buttons?

    Hello,
    I'm suffering from the dreaded emacs pinky (yes, I've already changed the caps-lock key to ctrl) and I want to know if it is possible to set the left and right command keys to different options.
    For example, to keep the right command key as command, but have the left function as ctrl.
    Thanks for any help.

    I think the answer is the same as last year.  Don't know of any way to do that.
    Captfred

  • Unable to set columns under Layout Margins and Columns

    On certain pages in my 40 page document, I am unable to set the number of columns by using Layout>Margins and Columns. The columns option is dimmed out. I have tried to set them on a blank page and pages where columns were previously set (I can see the guides). I am using a single Master for page numbering and it is applied to every page in the document. There are pages where I can set the columns. I've done some page comparison and can't find the setting that might control this. Using InDesign CS6 on Windows. Thank you.

    Why are you not using multiple column text frames instead of 2 text frames with columns on the master page? This would give more flexiblity.

  • Setting up, populating and printing a fixed layout sheet from the prowser

    HI Gentlemen:
    Can you help me in my problem? Given a fixed, customer-defined form layout with boilerplate text intermixed with variables, I have to generate it, populate it from my relational Oracle tables and print it locally on the customer's printer. Every component is precisely positioned with font type, size and color prescribed as well. I have never had this kind of task, which resembles to an Oracle Report definition. Please say where can I find further instructions and probably a working example.
    Thank you, kind regards from
    Miklos HERBOLY

    The steps for creation of an AcroForm are as follows:
    1) Install Adobe Acrobat at your workstation. A new menu call "Adobe PDF" will appear in MS Word/Excel/Powerpoint. Use Word/Excel to design your layout and print it to PDF using the menu item "Adobe PDF->Convert to Adobe PDF";
    2) Open the generated PDF document in Adobe Acrobat and add the necessary form fields, buttons, etc. Read the topic "Forms" in the Acrobat's help first. (N.B. Do not use the Adobe LifeCylcle Designer as it will create not an AcroForm but another type of form, use the menu item "Forms->Add or Edit Fields ..." instead);
    3) Use the Adobe FDF Toolkit in a servlet to create a FDF response in order to activate the form from a Web application. (See this simple example).
    Some useful links:
    - Developing Acrobat Applications Using Javascript (Read the chapter "Using Javascript in Forms").
    - Acrobat Javascript API Reference
    - Adobe FDF Toolkit

  • I'm unable to send an email, i get username or password incorrect despite being correct. Has anyone had this problem before and fixed it?

    I'm unable to send an email, i get username or password incorrect despite being correct. Has anyone had this problem before and fixed it?

    Are you sure the settings are correct? Did you check the outgoing mail server setting? Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • I've uploaded Acrobat XI Pro and it freezes when I'm using it.  I uninstalled and re-installed.  When I login, it says that it is unable to validate the account and has an option to use the trial.  How do I fix this?

    I've uploaded Acrobat XI Pro and it freezes when I'm using it.  I uninstalled and re-installed.  When I login, it says that it is unable to validate the account and has an option to use the trial.  How do I fix this?

    This is an open forum, not Adobe support... you need Adobe staff support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for