Unable to set the header - Message-Id in MimeMessage

Hi all,
I'm facing problem in setting the header -> Message-Id
for my MimeMessage.I tried setting the header using
MimeMessage.setHeader() , also I tried with
MimeMessage.addHeader() both the methods didn't
work.
I've also excuted the MimeMessage.saveChanges()
after setting the header.
I tried to display the message after using the above
with getHeader("Message-Id").
But it seems like the values I have set are not being
reflected.
Can anyone suggest why this is happening?
Any help will be great!!!
dannyy

Hi,
I'm getting the header after I do MimeMessage.saveChanges(); and before sending the mail.
I want to change the message-id that was generated as
you have mention below. Since I'm trying to automate
a part of my mail. I'm sending a request to a mail robot
which need the user name in specfic format
ex: [email protected] But its attaching my
local machine name at the end like : dannyy.fischer@localhost. Is there a way to change this part in the message id.
Please let me know.
thanks
dannyy

Similar Messages

  • Unable to open windows using boot camp.  Get message "The bless tool was unable to set the current boot disk."  Any thoughts, Thank you.

    Unable to open windows using boot camp.  Get message "The bless tool was unable to set the current boot disk."   I am using an Imac , Lion operating system, and Windows 7.  It worked a few days ago.  Any thoughts, Thank you.

    Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
    If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

  • JMS Adapter setting the header data of MQ message

    Hi All,
    I need to set the properties in JMS adapter for setting the header data of MQ message.
    JMS_IBM_MQMD_Format = MQFMT_NONE.
    Thanks in advance
    Ravijeet

    Hi All,
    I am stuck in a typical XI issue.......I have a scenario where my input to XI is IDoc and output is xml message going to IBM MQ.
    The IDoc is sending some chineese character which is fine is SXMB_MONI Integration server and also fine in the payload of message monitoring, so feel the message is going fine from XI to MQ.
    But the receiver EDI system which is picking the message from MQ queue says the chinese characters are getting corrupted. They say that you need to set the additional properties in MQ header data
    JMS_IBM_MQMD_Format = MQFMT_NONE.
    How do I do this in communication channel for jms adapter ? How to I set the MQ header data in jms communication channel ?
    Thanks in advance
    Ravijeet
    Edited by: RAVIJEET DAS on May 12, 2009 8:27 AM
    Edited by: RAVIJEET DAS on May 12, 2009 8:27 AM

  • Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

    Hi!
    We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
    manage mobile devices with Intune.
    Error message on Intune Portal:
    "Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
    Repeated: 19 times.
    Class: (System) Policy
    Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
    2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
    That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
    Br.
    Jukka

    Hi Jukka,
    Mobile policy doesn't apply to clients using the Full Client download.  Please open a support case so the team can assist in further troubleshooting.
    Thanks,
    Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

  • ORA-27047: unable to read the header block of file

    My Windows 2003 crashed which was running Oracle XE.
    I installed Oracle XE on Windows XP on another machine.
    I coped my D:\oracle\XE10g\oradata folder of Win2003 to the same location in WinXP machine.
    When I start the database in WinXP using SQLPLUS i get the following message
    SQL> startup
    ORACLE instance started.
    Total System Global Area 146800640 bytes
    Fixed Size 1286220 bytes
    Variable Size 62918580 bytes
    Database Buffers 79691776 bytes
    Redo Buffers 2904064 bytes
    ORA-00205: error in identifying control file, check alert log for more info
    I my D:\oracle\XE10g\app\oracle\admin\XE\bdump\alert_xe I found following errors
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    starting up 4 shared server(s) ...
    Oracle Data Guard is not available in this edition of Oracle.
    Wed Apr 25 18:38:36 2007
    ALTER DATABASE MOUNT
    Wed Apr 25 18:38:36 2007
    ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
    ORA-27047: unable to read the header block of file
    OSD-04001: invalid logical block size (OS 2800189884)
    Wed Apr 25 18:38:36 2007
    ORA-205 signalled during: ALTER DATABASE MOUNT...
    ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
    ORA-27047: unable to read the header block of file
    OSD-04001: invalid logical block size (OS 2800189884)
    Please help.
    Regards,
    Zulqarnain

    Try to install win 2003 server software, do the fresh installation of oracle software, now copy the datafiles and controlfiles to same locations as you did on winxp.
    get back to us, if still not out of the woods. I still doubt that a simple restore would do the trick, since you doing it across different platforms, might be I can be wrong, but this is what I personally feel, you not able to start the database on winxp.
    hare krishna
    Alok

  • How to set the header of the file to excel type when writing it?

    Hello,
    I am using POI API to read an excel file that I have previously written using Java, but not using POI (I've written the file using Microsoft office xml and then writing it using FileOutputStream with an xls extension).
    The problem is that when I read back the file I am getting this error:
    The system was unable to upload the file: Invalid header signature; read 7311066695147732796, expected -2226271756974174256.
    which means that the header of the file is not excel typed.
    If I manually open the file and save it as excel POI is able to read it but I don't want to do this as this entire process of writing/reading the file should be automated. I don't want to use POI for writing the file because POI cannot provide me everything that I need when Microsoft office xml can.
    So, my question is simple: Is there a way, using java, to set the header of a file to excel so that POI will recognize it as such?

    hi roy,
    @see: http://poi.apache.org/hssf/index.html
    "HSSF is the POI Project's pure Java implementation of the Excel '97(-2007) file format. It does not support the new Excel 2007 .xlsx OOXML file format, which is not OLE2 based."
    maybe jexcelapi supports you in writing your xls:
    http://jexcelapi.sourceforge.net/
    hth, jens

  • Error deploying EJB on weblogic: Unable to set the transaction attribute

    Hi,
    I'm trying to deploy an application in WL10.3.2 and an error occurred during activation of changes.
    Here is the error message from the log file:
    <Jun 6, 2011 1:28:27 PM MDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'serverEAR-2' due to error weblogic.application.ModuleException: Exception preparing module: EJBModule(serverEJB-2.8.0.jar)
    Unable to deploy EJB: C:\oracle\Middleware\user_projects\domains\base_domain\servers\Server_3\tmp\_WL_user\serverEAR-2\1zw7ao\serverEJB-2.8.0.jar from serverEJB-2.8.0.jar:
    Unable to set the transaction attribute for method 'saveActionGroup(EditableActionGroup)' on EJB 'ViewBean'. No matching method could be found. Please verify the method signature specified in the ejb-jar.xml file matches that of your Remote interface for this EJB.
    weblogic.application.ModuleException: Exception preparing module: EJBModule(serverEJB-2.8.0.jar)
    Unable to deploy EJB: C:\oracle\Middleware\user_projects\domains\base_domain\servers\Server_3\tmp\_WL_user\serverEAR-2\1zw7ao\serverEJB-2.8.0.jar from serverEJB-2.8.0.jar:
    Unable to set the transaction attribute for method 'saveActionGroup(EditableActionGroup)' on EJB 'ViewBean'. No matching method could be found. Please verify the method signature specified in the ejb-jar.xml file matches that of your Remote interface for this EJB.
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:59)
         Truncated. see log file for complete stacktrace
    Caused By: weblogic.ejb.container.deployer.DeploymentDescriptorException: Unable to set the transaction attribute for method 'saveActionGroup(EditableActionGroup)' on EJB 'ViewBean'. No matching method could be found. Please verify the method signature specified in the ejb-jar.xml file matches that of your Remote interface for this EJB.
         at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.processCTs(MBeanDeploymentInfoImpl.java:1502)
         at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.processSpecificMethodCTs(MBeanDeploymentInfoImpl.java:1472)
         at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.initializeTransactionAttribute(MBeanDeploymentInfoImpl.java:773)
         at weblogic.ejb.container.deployer.MBeanDeploymentInfoImpl.<init>(MBeanDeploymentInfoImpl.java:259)
         at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1190)
         Truncated. see log file for complete stacktrace
    Please help me...Thanks.

    In your ejb-jar.xml you are referring to a method saveActionGroup(EditableActionGroup) which is not defined in your remote interface.
    Maybe you have made some typo in the configuration. Check your transaction section, i.e.,
    <container-transaction>
                <method>
                    <ejb-name>ViewBean</ejb-name>
                    <method-name>saveActionGroup</method-name>
                    <method-params>
                        <method-param>package.EditableActionGroup</method-param>
                    </method-params>
                </method>
                <trans-attribute>Required</trans-attribute>
    </container-transaction>or something similar. See if the defined methods are corresponding to the methods defined in the remote interface.

  • Unable to set the colorIndex Property of the Interior Class

    HI
    Iam trying to Update the Accound Dim with New Property 'CostAcc" IN SAP BPC.
    i entered the text and lenth of the property then i clicked on Modify The Dim Property. then its giving a warning message"Unable to set the colorIndex Property of the Interior Class"
    BPC Experts pls send me a  sollution
    Thanks in advance
    Regards
    NarsiP
    SAP BPC Consultant
    OutLookSoft SA

    Did you process your account dimension before to add you property?
    Are you sure that your account dimension was working before to apply your modification?
    Did you add just one property ore more properties?
    Did you delete any existing properties?
    Did you try to do modify account dimension without adding any porperties to see if that dimension is fine?
    Regards
    Sorin Radulescu

  • Unable to set the selected value for a ADF LOV

    Hi,
    I am developing an application using jdeveloper 10.1.3 and Struts.
    I have created a ADF LOV on my JSP Page as given below:
    <html:select property="lob" onchange="javascript:selectLOB(this.form)">
    <html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
    </html:select>
    When i submit the form, i am able to get the value of the selected Value in the List.
    JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
    Row r = (Row) listBinding.getSelectedValue();
    String SoLob = (String) r.getAttribute("LobLob");
    But i am unable to set the selected value back in the list when i return to the form again.
    I tried the following:
    int x = listBinding.getSelectedIndex();
    listBinding.setSelectedIndex(x);
    It would be really helpful if some one could let me know what needs to be done.
    Thanks,
    Subashini

    Gyan,
    I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
    "Rendered" on the field so that based on search parameters we can hide result table column.
    After searching online, I modified the controller code as follows
    1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
    2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
    3. Modified the controller code as follows :
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
            OADBTransaction txn = am.getOADBTransaction();
            if (testvo != null)
              OARow row = (OARow)testvo.first();
                if (a.equalsIgnoreCase("Approved"))
                     row.setAttribute("Testrender", Boolean.FALSE);
                else
                     row.setAttribute("Testrender", Boolean.TRUE);
            } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
    Its using only the value of one search parameter but not the second one .
    The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
    So can you please let me know how to proceed from here ?

  • How to set the header variables in weblogic

    Hi,
    We have a following set up in our environment.
    We have weblogic and on the top of it we have apex listener deployed which redirects Oracle Apex.
    My Issue:
    How can we set up the header variables in weblogic once the user is authenticated against weblogic server.
    We are struck here, not knowing how to set the header variables in weblogic server. Its fairly straight forward for Oracle Access Manager or others..
    Thanks
    Ramesh P.

    maybe you are looking for the routing options
    http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1125348

  • Setting the header of a Column group in a Advanced table dynamically

    Hi All,
    There is a requirement to set the Header of a column group in a Advanced table dynamically by fetching the values from a view attribute.
    Code :
    OAAdvancedTableBean spiderTbl1 ;
    Problem:
    It is not able to set the value for the header inspite of getting the handle of the bean.
    Analysis:
    the same piece of code works for
    1) Setting the text of the advanced table
    2) Setting the header of a column in a column group
    Please let me know if there is anything more that needs to be done for setting the prompt of a column group header.
    Thanks in advance!

    I have posted it without giving the complete code by mistake. Below is the code:
    OAAdvancedTableBean spiderTbl1 ;
    OASortableHeaderBean spiderHdr1;
    spiderTbl1 = (OAAdvancedTableBean)webBean.findChildRecursive("SpiderCatTbl1RN");
    if (spiderTbl1!=null){
    spiderHdr1= (OASortableHeaderBean)spiderTbl1.findChildRecursive("AnalogHdr");
    if (spiderHdr1!=null) {
    spiderHdr1.setAttributeValue(OAWebBeanConstants.PROMPT_ATTR,
    new OADataBoundValueViewObject(spiderHdr1,
    "SpiderCategory1",
    "ProjRegPVO1"));
    }

  • How to set the header for second page

    Hello all,
    I'm trying to set different header for first page and page number should starts from second page.
    Below is the sample code to set the header for each and every page.
    DECLARE
    hApplication OLE2.OBJ_TYPE;
    hWindow OLE2.OBJ_TYPE;
    hPane OLE2.OBJ_TYPE;
    hView OLE2.OBJ_TYPE;
    hDocuments OLE2.OBJ_TYPE;
    hDocument OLE2.OBJ_TYPE;
    hSelection OLE2.OBJ_TYPE;
    hParagraphFormat OLE2.OBJ_TYPE;
    hRange OLE2.OBJ_TYPE;
    hFields OLE2.OBJ_TYPE;
    hFont OLE2.OBJ_TYPE;
    args OLE2.LIST_TYPE;
    wdAlignParagraphLeft CONSTANT number(3) := 0;
    wdAlignParagraphCenter CONSTANT number(3) := 1;
    wdAlignParagraphRight CONSTANT number(3) := 2;
    wdSeekCurrentPageHeader CONSTANT number(3) := 9;
    wdSeekCurrentPageFooter CONSTANT number(3) := 10;
    wdSeekMainDocument CONSTANT number(3) := 0;
    wdFieldPage CONSTANT number(3) := 33;
    wdFieldNumPages CONSTANT number(3) := 26;
    wdPageBreak CONSTANT number(3) := 7;
    wdStory CONSTANT number(3) := 6;
    myTab CONSTANT varchar2(1) := chr(9);
    myBlue CONSTANT number(8) := 16711680; --FF0000
    myGreen CONSTANT number(8) := 65280; --00FF00
    myRed CONSTANT number(8) := 255; --0000FF
    myDkGreen CONSTANT number(8) := 32768; --008000
    myBlack CONSTANT number(8) := 0; --000000
    myText varchar2(2000);
    BEGIN
    hApplication:=OLE2.CREATE_OBJ('Word.Application');
    OLE2.SET_PROPERTY(hApplication, 'Visible', 1);
    hDocuments := OLE2.GET_OBJ_PROPERTY(hApplication, 'Documents');
    hDocument := OLE2.INVOKE_OBJ(hDocuments, 'Add');
    -------- Create Header and Footer --------
    hWindow := OLE2.GET_OBJ_PROPERTY(hApplication, 'ActiveWindow');
    hPane := OLE2.GET_OBJ_PROPERTY(hWindow, 'ActivePane' );
    hView := OLE2.GET_OBJ_PROPERTY(hPane, 'View' );
    ---- Header Section ---
    OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageHeader);
    hSelection := OLE2.GET_OBJ_PROPERTY(hApplication, 'Selection');
    hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
    OLE2.SET_PROPERTY(hFont, 'Name', 'Times New Roman');
    OLE2.SET_PROPERTY(hFont, 'Size', 10);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
    OLE2.SET_PROPERTY(hFont, 'Color', MyBlue );
    hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
    OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
    OLE2.RELEASE_OBJ(hParagraphFormat);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'This is a');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.INVOKE(hSelection, 'TypeParagraph');
    OLE2.SET_PROPERTY(hFont, 'Size', 16);
    OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
    OLE2.SET_PROPERTY(hFont, 'Color', MyDkGreen );
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'Test Header');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    ---- Footer Section ----
    OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageFooter);
    hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
    OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
    OLE2.RELEASE_OBJ(hParagraphFormat);
    hFields := OLE2.GET_OBJ_PROPERTY(hSelection, 'Fields');
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'Page ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG_OBJ(args, hRange);
    OLE2.ADD_ARG(args, wdFieldPage);
    OLE2.INVOKE(hFields, 'Add', args );
    OLE2.DESTROY_ARGLIST(args);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, ' of ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG_OBJ(args, hRange);
    OLE2.ADD_ARG(args, wdFieldNumPages);
    OLE2.INVOKE(hFields, 'Add', args );
    OLE2.DESTROY_ARGLIST(args);
    OLE2.RELEASE_OBJ(hRange);
    OLE2.RELEASE_OBJ(hFields);
    OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekMainDocument);
    OLE2.RELEASE_OBJ(hView);
    OLE2.RELEASE_OBJ(hPane);
    OLE2.RELEASE_OBJ(hWindow);
    -------- Insert Text --------
    hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
    OLE2.SET_PROPERTY(hFont, 'Name', 'Arial');
    OLE2.SET_PROPERTY(hFont, 'Size', 12);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE );
    OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
    OLE2.INVOKE(hSelection, 'TypeParagraph');
    myText := myTab || 'This text is on the ';
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, myText);
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
    OLE2.SET_PROPERTY(hFont, 'Color', myRed);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'first ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
    OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'page.');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, wdPageBreak);
    OLE2.INVOKE(hSelection, 'InsertBreak', args);
    OLE2.DESTROY_ARGLIST(args);
    ----page 2
    myText := myTab || 'This text is on the ';
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, myText );
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
    OLE2.SET_PROPERTY(hFont, 'Color', myBlue);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'second ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
    OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'page.');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    ---- go to the top of the first page
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, wdStory);
    OLE2.INVOKE(hSelection, 'HomeKey', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.RELEASE_OBJ(hFont);
    OLE2.RELEASE_OBJ(hSelection);
    OLE2.RELEASE_OBJ(hDocument);
    OLE2.RELEASE_OBJ(hDocuments);
    OLE2.RELEASE_OBJ(hApplication);
    END;
    Please help me out
    Thanks,
    Bhavana

    Click on --
    Edit link for Page> Click "Edit Default" link on Banner >
    Under the "Banner Links"
    provide value something like this:
    Label = Help
    URL = /pls/portal30/docs/myhelp.html
    Icon = U can upload any icon here.
    For Application Components = See the Second Last tab on "Edit Component".
    Thanx,
    Chetan.

  • Unable to set the ip address for hosted network client after creating WIFI hotspot

    Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
    HI all
    I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
    so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
    but the problem I am facing is slight different
    I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
    when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
    but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
    as soon as I close the window, the ip address also disappears
    when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
    when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
    so what cause the failure in internet connectivity but success in hotspot connectivity?
    check the screen shots...
    can u help me..
    its little complicated

    Hi,
    Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
    If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
    Roger Lu
    TechNet Community Support

  • Why am I unable to use the text message feature on my Honda CRV with my iphone 6?

    Am I unable to use the text messaging feature on my 2014 Honda CRV with my Iphone 6?

    mspacmn wrote:
    Am I unable to use the text messaging feature on my 2014 Honda CRV with my Iphone 6?
    Yes, you are unable to use text messaging feature with your iPhone.
    -> http://owners.honda.com/vehicles/information/2014/CR-V/features/SMS-Text-Message -Function/3
    "The system is currently compatible with select Blackberry® phones with Bluetooth"

  • Error Deployer BEA-149231 Unable to set the activation state to true

    Hi Friends ,
    We are using weblogic 10.3.5.0, one of the deployment module is in failed status.
    In the application logs we could see the following error
    ERROR Util: Initial Spring Application Context creation failed: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'datasource' defined in class path resource [spring.xml]: Invocation of init method failed; nested exception is javax.naming.NoPermissionException: User &lt;anonymous&gt; does not have permission on comp.env.cpt to perform lookup operation
    in the weblogic server logs we could find the follow error
    <24-Jan-2013 08:47:43 o'clock CET> <Warning> <HTTP> <BEA-101162> <User defined listener org.apache.myfaces.webapp.StartupServletContextListener failed: java.lang.ExceptionInInitializerError.java.lang.ExceptionInInitializerError
    at com.db.cpt.biz.Utilities.Util.<clinit>(Util.java:114)
    at com.db.cpt.web.listener.MyPhaseListener.<clinit>(MyPhaseListener.java:26)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    Truncated. see log file for complete stacktrace
    Caused By: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'datasource' defined in class path resource [spring.xml]: Invocati
    on of init method failed; nested exception is javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation.
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1170)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:427)
    at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:249)
    at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:155)
    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:246)
    Truncated. see log file for complete stacktrace
    Caused By: javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.xxx to perform lookup operation.
    at weblogic.jndi.internal.ServerNamingNode.checkPermission(ServerNamingNode.java:443)
    at weblogic.jndi.internal.ServerNamingNode.checkLookup(ServerNamingNode.java:423)
    at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:180)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
    Truncated. see log file for complete stacktrace
    >
    <24-Jan-2013 08:47:43 o'clock CET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'xxx'.
    weblogic.application.ModuleException:
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    Truncated. see log file for complete stacktrace
    Caused By: javax.naming.NoPermissionException: User <anonymous> does not have permission on comp.env.cpt to perform lookup operation.
    at weblogic.jndi.internal.ServerNamingNode.checkPermission(ServerNamingNode.java:443)
    at weblogic.jndi.internal.ServerNamingNode.checkLookup(ServerNamingNode.java:423)
    at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:180)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
    Truncated. see log file for complete stacktrace
    Can you please advise us how can we resolve this issue which with i am struggling
    Raja

    Kumar,
    thanks for the update.
    we fixed the issue,
    for a particular user we didnt add his membership in a group in security realm, we added the user to a particular group, and then restarted weblogic, and deployed the module, and then status of deployment becomes successful.
    Raja

Maybe you are looking for