Unable to sort the content of the jTable

Hi all ,
I m using this code for sorting in the Jtable
JTable table = new JTable(new MyTable());
        table.setPreferredScrollableViewportSize(new Dimension(500,500));
        table.setFillsViewportHeight(true);
        table.setAutoCreateRowSorter(true);Where MyTable --> is the AbstractTableModel.
Im using LookAndFeel -- com.birosoft.liquid.
With this lookandfeel , when I click the columnheader , it is not sorting :(
But when I change the lookandfeel as default it is working.
Can anybody tell what Im doing wrong. or is there any method through which I can sort with com.birosoft lookandfeel
Thanks and regards
Anshuman Srivastava

Thaks for advice .
I have checked their API , theere is some bug for sorting it.
So what I have done . this JTable I opened in a Jdialog , for which I have made the lookandfeel as default.
This code when I making the JDialog
try{
               UIManager.setLookAndFeel(UIManager.getCrossPlatformLookAndFeelClassName());
          catch(Exception e){}
          panel = new JPanel();Now when closing the JDialog , Im making resetting the lookandfeel
@Override
               public void windowClosing(WindowEvent e) {
                    // TODO Auto-generated method stub
                    try{
                         UIManager.setLookAndFeel("com.birosoft.liquid.LiquidLookAndFeel");
                         SwingUtilities.updateComponentTreeUI(parent);
                         parent.pack();
                         parent.repaint();
                    catch(Exception ecc){}
               }where in this parent is the frame over which I have opened the JDilaog.
But after it didnt reset the lookandfeel for the other component
Thanks and regards
Anshuman Srivastava

Similar Messages

  • Setting tooltip when the content of the cell is not visible in jtable

    hello,
    i want to set a tooltip when the content of the cell is not visible in jtable
    please guide me.
    thanks
    daya

    thanks for your replay,
    i did in this way
    final TableColumn colTableColumn = getColumnModel().getColumn(vColIndex);
                        if (colTableColumn.getWidth() < this.getPreferredSize().width)
                            setToolTipText(value.toString());
                        else
                            setToolTipText(null);
                        }thanks
    daya

  • Cisco SSL VPN "The following error occurred while attempting the file operation: Unable to view the contents of the Domain/Workgroup. "

    Hey People, 
    Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
    le box, but when i click browse network and select the network name i get the following message
    "The following error occurred while attempting the file operation:
    Unable to view the contents of the Domain/Workgroup. "
    Has anyone come accross this before?
    Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing. 
    The connection goes WAN->BROADBANDROUTER>CISCO2821
    Any helo would be much greatly appreciated. 
    Thanks in advance! 

    Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Unable to delete the contents of the Cube.

    Hi All,
      I am trying to delete the contents of the cube selecting the option<b>(Delete Data</b>) from the context menu of the cube.
    I am getting the error message as
    Database Table /BI0/F0PA_C01 Could not be deleted or recreated.
    is there a way to solve this issue.
    Thanks & Reegards
    Chetana. S

    Hello Chetana,
    If you have to delete the data from the cube and then again schedule full updates, following are the steps:
    (please dont bother about the present error and go ahead with the following steps):
    1. right click on cube-> Manage. In the requests tab, select all requests and click on the delte icon below.
    click on refresh till you dont see any requests on this screen.
    2. if you had some initialisation loads done before in this cube, go to the infopackage for the init loads.
    In the infopackage change screen, go to the menu scheduler-> initialisation options for source system-> delete the request(if any).
    3. the above steps will ensure that all data is deleted from the cube. you can then go ahead and load full update data loads on the same( if you are sure you want to go ahead with the full update option).
    Hope this helps..
    thanks,
    (dont forget to assign points for helpful answers...)

  • ITunes Reports "iTunes Cannot read the contents of the iPod...."

    This morning I connected my 2 week old iPod Classic to my laptop via the USB cable and iTunes came up and displayed a message saying "iTunes cannot read the contents of the iPod MHAM'S IPOD". It suggested a restore, which I have not tried yet. I have faithfully used the "Eject" function in iTunes to disconnect. After reading some other posts in the forums, it appears that others are having a similar issue. I'm concerned that this is normal operating behavior for this product. Given that this is my first Apple brand purchase, I'm a little turned off to the brand. Does anyone have a suggestion that doesn't involve me wiping this thing clean and starting over? And is this something that I should just expect? I ran a diagnostic and the results are below.
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Latitude D620
    iTunes 7.4.3.1
    iPodService 7.4.3.1 is currently running.
    iTunesHelper 7.4.3.1 is currently running.
    Current user is an administrator.
    The current local date and time is 2007-10-16 07:04:02.
    Connected Storage Devices:
    Disk drive, Hitachi HTS541080G9SA00, Bus Type ATA, Bus Address [0,0]
    Disk drive, Apple iPod USB Device, Bus Type USB
    Disk drive, RIM BlackBerry SD USB Device, Bus Type USB
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No IEEE 1394 Host Controller found.
    The iPod Service Logging Information:
    [SERVICE: 0xF88,06:40:36 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Tue Oct 16 06:40:36 2007)
    [SERVICE: 0xF88,06:40:36 INFO] ##### iPodService starting as a service, version: 7.4.3.1
    [SERVICE: 0xFD0,06:40:36 INFO] Adding iTunesHelper to session 0
    [SERVICE: 0xF98,06:40:36 INFO] Got signaled to go ahead... Starting device manager!
    [SERVICE: 0x114,06:40:36 INFO] Listener Window created
    [SERVICE: 0x114,06:40:57 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:41:40 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:44:25 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:48:13 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:13 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x114,06:57:13 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x114,06:57:13 INFO] device is an iPod
    [SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x114,06:57:13 INFO] [-1] set waiting to mount = 1
    [SERVICE: 0x114,06:57:13 INFO] [1] Assigning session 0
    [SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
    [SERVICE: 0x114,06:57:13 INFO] [1] added state machine 1 to m_objDeviceIdMap
    [SERVICE: 0x114,06:57:13 INFO] [1] added device number 2 to m_objDeviceNumberMap
    [SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
    [SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:13 INFO] [1] input #0 from src #0
    [SERVICE: 0xEC,06:57:13 INFO] [1] input #0
    [SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:13 INFO] [1] input #1 from src #0
    [SERVICE: 0x11C,06:57:13 INFO] [1] input #1
    [SERVICE: 0x114,06:57:13 INFO] [VolumeArrive] mask = 0x20
    [SERVICE: 0x114,06:57:13 INFO] looking up device # for \\.\F:
    [SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x114,06:57:13 INFO] iTunes device #2 found with drive letter F, mask 0x20
    [SERVICE: 0x114,06:57:13 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x114,06:57:13 INFO] [1] input #2 from src #0
    [SERVICE: 0x128,06:57:13 INFO] [1] input #2
    [SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:57:13 INFO] [1] input #3 from src #0
    [SERVICE: 0x118,06:57:13 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x118,06:57:13 INFO] [First Connect] Creating connect event for device 1
    [SERVICE: 0x118,06:57:13 INFO] [1] set waiting to mount = 1
    [SERVICE: 0x118,06:57:13 INFO] [1] input #4 from src #0
    [SERVICE: 0xEC,06:57:13 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
    [SERVICE: 0xEC,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,06:57:14 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
    [SERVICE: 0x11C,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
    [SERVICE: 0x128,06:57:14 INFO] ** CItunesDevice::HandleHardwareInput()
    [SERVICE: 0x128,06:57:14 INFO] [1] input #3
    [SERVICE: 0xEC,06:57:14 INFO] [1] input #4
    [SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
    [SERVICE: 0x128,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 INPUT #4] - (HDW) Interface Arrival
    [SERVICE: 0xEC,06:57:14 INFO] [1] progress state is 2, Waiting to mount = 1
    [SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
    [SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
    [SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
    [SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 ACTIONS] - {Connected}
    [SERVICE: 0xEC,06:57:14 INFO] [1] SCSI Inquiry attempt #0
    [SERVICE: 0xEC,06:57:14 INFO] VendorId: Apple
    [SERVICE: 0xEC,06:57:14 INFO] ProductId: iPod
    [SERVICE: 0xEC,06:57:14 INFO] revision: 1.62
    [SERVICE: 0xEC,06:57:14 INFO] vendor bytes:
    [SERVICE: 0xEC,06:57:14 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
    [SERVICE: 0xEC,06:57:14 INFO] [1] firmware version: 1.62 (0x13E)
    [SERVICE: 0xEC,06:57:14 INFO] [1] Power State: Powered
    [SERVICE: 0xEC,06:57:14 INFO] [1] Checkpoint attempt #0
    [SERVICE: 0xEC,06:57:14 ERROR] Did not find first letter of stage
    [SERVICE: 0xEC,06:57:14 INFO] got HotPlugState 0
    [SERVICE: 0xEC,06:57:14 INFO] [1] serial number 000A27001547056B
    [SERVICE: 0xEC,06:57:14 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
    [SERVICE: 0xEC,06:57:14 INFO] [1] *** CONNECTED - Sending event out, device session 0.
    [SERVICE: 0x118,06:57:14 INFO] [First Connect] Creating mount event for device 1
    [SERVICE: 0x118,06:57:14 INFO] [VolumeArrive] mask = 0x7C
    [SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\G:
    [SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x118,06:57:14 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\F:
    [SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x118,06:57:14 INFO] iTunes device #2 found with drive letter F, mask 0x20
    [SERVICE: 0x118,06:57:14 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x118,06:57:14 INFO] [1] input #5 from src #0
    [SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\E:
    [SERVICE: 0x11C,06:57:14 INFO] [1] input #5
    [SERVICE: 0x118,06:57:14 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x118,06:57:15 INFO] looking up device # for \\.\D:
    [SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x0 partition 0x3
    [SERVICE: 0x118,06:57:15 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
    [SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
    [SERVICE: 0x11C,06:57:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 ACTIONS] - {Mounted}
    [SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,06:57:15 ERROR] Did not find first letter of stage
    [SERVICE: 0x11C,06:57:15 INFO] got HotPlugState 0
    [SERVICE: 0x11C,06:57:19 INFO] [1] OS says filesystem is FAT32
    [SERVICE: 0x11C,06:57:19 INFO] [1] ===== iPod with Video =====
    [SERVICE: 0x11C,06:57:19 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,06:57:19 INFO] 6:57:19, year 2007, day of yr. 288, GMT offset -20 isDST 1
    [SERVICE: 0x11C,06:57:19 INFO] [1] progress is now 0
    [SERVICE: 0x11C,06:57:20 INFO] [1] *** MOUNTED - Sending event out, device session 0.
    [SERVICE: 0x11C,06:57:20 INFO] [1] Auto-launch iTunes ENABLED
    [SERVICE: 0x11C,06:57:20 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
    [SERVICE: 0xF90,06:57:21 INFO] Getting iTunesHelper for session 0
    [SERVICE: 0xF90,06:57:21 INFO] launching iTunes.
    [SERVICE: 0x90C,06:57:25 INFO] <0x4> Got Serial #
    [SERVICE: 0x90C,06:57:25 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xFD8,06:57:25 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,06:57:25 INFO] Mounted
    [SERVICE: 0xFD8,06:57:25 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:57:25 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:57:25 INFO] Mounted
    [SERVICE: 0x90C,06:57:25 INFO] [1] already mounted!
    [SERVICE: 0x90C,06:57:25 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x90C,06:57:26 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xFD8,06:57:26 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,06:57:26 INFO] Mounted
    [SERVICE: 0xFD8,06:57:26 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:57:26 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:57:26 INFO] <0x4> COM request for device 1 drive letter - F
    [SERVICE: 0x90C,06:57:27 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,06:57:27 INFO] Mounted
    [SERVICE: 0x90C,06:57:27 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,06:57:27 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,06:57:27 INFO] Mounted
    [SERVICE: 0xFD8,06:57:27 INFO] [1] already mounted!
    [SERVICE: 0xFD8,06:57:27 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0xFD8,06:57:40 INFO] Mounted
    [SERVICE: 0xFD8,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:57:40 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,06:57:40 INFO] Mounted
    [SERVICE: 0x90C,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:58:19 INFO] <0x4> Got Serial #
    [SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,06:58:19 INFO] Mounted
    [SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:58:19 INFO] Mounted
    [SERVICE: 0x90C,06:58:19 INFO] [1] already mounted!
    [SERVICE: 0x90C,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,06:58:19 INFO] Mounted
    [SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:58:19 INFO] <0x4> COM request for device 1 drive letter - F
    [SERVICE: 0x90C,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,06:58:19 INFO] Mounted
    [SERVICE: 0x90C,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,06:58:19 INFO] Mounted
    [SERVICE: 0xFD8,06:58:19 INFO] [1] already mounted!
    [SERVICE: 0xFD8,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0xFD8,06:58:23 INFO] Mounted
    [SERVICE: 0xFD8,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,06:58:23 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,06:58:23 INFO] Mounted
    [SERVICE: 0x90C,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,06:58:26 INFO] [1] input #6 from src #4
    [SERVICE: 0x128,06:58:26 INFO] [1] input #6
    [SERVICE: 0x128,06:58:27 INFO] [MACHINE 1 INPUT #6] - (APP) Unmount
    [SERVICE: 0x128,06:58:27 INFO] [1] Begin...
    [SERVICE: 0x128,06:58:27 INFO] [1] Mounted state
    [SERVICE: 0x128,06:58:27 INFO] total locks = 1, caller = 296, caller locks = 1
    [SERVICE: 0x128,06:58:27 INFO] [1] Begin Unmounting...
    [SERVICE: 0x128,06:58:27 INFO] [1] progress is now 3
    [SERVICE: 0x128,06:58:27 INFO] total locks = 2, caller = 296, caller locks = 2
    [SERVICE: 0x128,06:58:27 INFO] Ejecting media
    [SERVICE: 0x128,06:58:27 INFO] SUCCESS
    [SERVICE: 0x128,06:58:27 INFO] Volume lock success!
    [SERVICE: 0x128,06:58:28 INFO] total locks = 3, caller = 296, caller locks = 3
    [SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW stop
    [SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:29 INFO] [1] input #7 from src #0
    [SERVICE: 0xEC,06:58:29 INFO] [1] input #7
    [SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:29 INFO] [1] input #8 from src #0
    [SERVICE: 0x11C,06:58:29 INFO] [1] input #8
    [SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW took 625 ms
    [SERVICE: 0x128,06:58:29 INFO] total locks = 2, caller = 296, caller locks = 2
    [SERVICE: 0x128,06:58:29 INFO] total locks = 1, caller = 296, caller locks = 1
    [SERVICE: 0x128,06:58:29 INFO] [1] Finished Unmounting with status 1
    [SERVICE: 0x128,06:58:29 INFO] total locks = 0, caller = 296, caller locks = 0
    [SERVICE: 0x128,06:58:29 INFO] [1] Ext app unmount request finished!
    [SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
    [SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,06:58:30 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
    [SERVICE: 0x11C,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x114,06:58:30 INFO] [VolumeRemoved] existing mask 0x20, arrive mask 0x20
    [SERVICE: 0x114,06:58:30 INFO] [1] value = 1
    [SERVICE: 0x114,06:58:30 INFO] [1] input #9 from src #0
    [SERVICE: 0x128,06:58:30 INFO] [1] input #9
    [SERVICE: 0x114,06:58:30 INFO] [InterfaceRemoved]
    [SERVICE: 0x114,06:58:30 INFO] [1] value = 0
    [SERVICE: 0x114,06:58:30 INFO] removed device number 2 from m_objDeviceNumberMap
    [SERVICE: 0x114,06:58:30 INFO] [1] input #10 from src #0
    [SERVICE: 0xEC,06:58:30 INFO] [1] input #10
    [SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 INPUT #9] - (HDW) Volume Unmount
    [SERVICE: 0x128,06:58:30 INFO] [1] progress is now 3
    [SERVICE: 0x128,06:58:30 INFO] [1] Setting progress to 3
    [SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Connected}
    [SERVICE: 0x128,06:58:30 INFO] [1] *** UNMOUNTED - Sending event out, device session 0.
    [SERVICE: 0x128,06:58:30 INFO] [1] !!!!! DoConnectStateAction() INTERRUPTED.
    [SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #10] - (HDW) Interface Removal
    [SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Unknown}
    [SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 ACTIONS] - {Unknown}
    [SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xEC,06:58:30 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
    [SERVICE: 0xEC,06:58:30 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
    [SERVICE: 0xEC,06:58:30 INFO] [1] progress is now 0
    [SERVICE: 0xEC,06:58:30 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,06:58:38 INFO] [1] input #11 from src #0
    [SERVICE: 0x11C,06:58:38 INFO] [1] input #11
    [SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,06:58:38 INFO] [1] input #12 from src #0
    [SERVICE: 0x128,06:58:38 INFO] [1] input #12
    [SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
    [SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,06:58:38 INFO] [1] input #13 from src #0
    [SERVICE: 0xEC,06:58:38 INFO] [1] input #13
    [SERVICE: 0x11C,06:58:38 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
    [SERVICE: 0x11C,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x128,06:58:38 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
    [SERVICE: 0x128,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0xEC,06:58:38 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
    [SERVICE: 0xEC,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #14 from src #0
    [SERVICE: 0x11C,07:02:24 INFO] [1] input #14
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #15 from src #0
    [SERVICE: 0x128,07:02:24 INFO] [1] input #15
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #16 from src #0
    [SERVICE: 0xEC,07:02:24 INFO] [1] input #16
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #17 from src #0
    [SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x114,07:02:24 INFO] [1] input #18 from src #0
    [SERVICE: 0x11C,07:02:24 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
    [SERVICE: 0x11C,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x128,07:02:24 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
    [SERVICE: 0x128,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xEC,07:02:24 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
    [SERVICE: 0xEC,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xEC,07:02:24 INFO] [1] input #17
    [SERVICE: 0x11C,07:02:24 INFO] [1] input #18
    [SERVICE: 0xEC,07:02:25 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
    [SERVICE: 0xEC,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:25 INFO] [MACHINE 1 INPUT #18] - (HDW) CheckDevNode
    [SERVICE: 0x11C,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x114,07:02:27 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 1
    [SERVICE: 0x114,07:02:27 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
    [SERVICE: 0x114,07:02:27 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
    [SERVICE: 0x114,07:02:27 INFO] [1] added state machine 1 to m_objDeviceIdMap
    [SERVICE: 0x114,07:02:27 INFO] [1] added device number 2 to m_objDeviceNumberMap
    [SERVICE: 0x114,07:02:27 INFO] [1] input #19 from src #0
    [SERVICE: 0x128,07:02:27 INFO] [1] input #19
    [SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:27 INFO] [1] input #20 from src #0
    [SERVICE: 0xEC,07:02:27 INFO] [1] input #20
    [SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:27 INFO] [1] input #21 from src #0
    [SERVICE: 0x11C,07:02:27 INFO] [1] input #21
    [SERVICE: 0x114,07:02:27 INFO] [VolumeArrive] mask = 0x20
    [SERVICE: 0x114,07:02:27 INFO] looking up device # for \\.\F:
    [SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x114,07:02:27 INFO] iTunes device #2 found with drive letter F, mask 0x20
    [SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x114,07:02:27 INFO] [1] input #22 from src #0
    [SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
    [SERVICE: 0x114,07:02:27 INFO] [1] input #23 from src #0
    [SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #19] - (HDW) Interface Arrival
    [SERVICE: 0x128,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
    [SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
    [SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
    [SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Connected}
    [SERVICE: 0x128,07:02:28 INFO] [1] SCSI Inquiry attempt #0
    [SERVICE: 0x128,07:02:28 INFO] VendorId: Apple
    [SERVICE: 0x128,07:02:28 INFO] ProductId: iPod
    [SERVICE: 0x128,07:02:28 INFO] revision: 1.62
    [SERVICE: 0x128,07:02:28 INFO] vendor bytes:
    [SERVICE: 0x128,07:02:28 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
    [SERVICE: 0x128,07:02:28 INFO] [1] firmware version: 1.62 (0x13E)
    [SERVICE: 0x128,07:02:28 INFO] [1] Power State: Powered
    [SERVICE: 0x128,07:02:28 INFO] [1] Checkpoint attempt #0
    [SERVICE: 0x128,07:02:28 ERROR] Did not find first letter of stage
    [SERVICE: 0x128,07:02:28 INFO] got HotPlugState 0
    [SERVICE: 0x128,07:02:28 INFO] [1] serial number 000A27001547056B
    [SERVICE: 0x128,07:02:28 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
    [SERVICE: 0x128,07:02:28 INFO] [1] *** CONNECTED - Sending event out, device session 0.
    [SERVICE: 0xEC,07:02:28 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
    [SERVICE: 0xEC,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #21] - (HDW) CheckDevNode
    [SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:28 INFO] [1] input #22
    [SERVICE: 0x128,07:02:28 INFO] [1] input #23
    [SERVICE: 0xFD8,07:02:28 INFO] <0x4> Got Serial #
    [SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
    [SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
    [SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
    [SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Mounted}
    [SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x128,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,07:02:28 ERROR] Did not find first letter of stage
    [SERVICE: 0x11C,07:02:28 INFO] got HotPlugState 0
    [SERVICE: 0x11C,07:02:33 INFO] [1] OS says filesystem is FAT32
    [SERVICE: 0x11C,07:02:33 INFO] [1] ===== iPod with Video =====
    [SERVICE: 0x11C,07:02:33 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x11C,07:02:33 INFO] 7:2:33, year 2007, day of yr. 288, GMT offset -20 isDST 1
    [SERVICE: 0x11C,07:02:33 INFO] [1] progress is now 0
    [SERVICE: 0xFD8,07:02:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,07:02:33 INFO] Mounted
    [SERVICE: 0xFD8,07:02:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,07:02:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,07:02:33 INFO] Mounted
    [SERVICE: 0x90C,07:02:33 INFO] [1] already mounted!
    [SERVICE: 0x11C,07:02:34 INFO] [1] *** MOUNTED - Sending event out, device session 0.
    [SERVICE: 0x11C,07:02:34 INFO] [1] Auto-launch iTunes ENABLED
    [SERVICE: 0x11C,07:02:34 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
    [SERVICE: 0x90C,07:02:34 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0xFD8,07:02:34 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0x90C,07:02:34 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x90C,07:02:34 INFO] Mounted
    [SERVICE: 0x90C,07:02:34 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,07:02:34 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,07:02:34 INFO] <0x4> COM request for device 1 drive letter - F
    [SERVICE: 0xFD8,07:02:35 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,07:02:35 INFO] Mounted
    [SERVICE: 0xFD8,07:02:35 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,07:02:35 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,07:02:35 INFO] Mounted
    [SERVICE: 0x90C,07:02:35 INFO] [1] already mounted!
    [SERVICE: 0x90C,07:02:35 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0xF8C,07:02:35 INFO] iTunes already running in current session.
    [SERVICE: 0x90C,07:03:51 INFO] Mounted
    [SERVICE: 0x90C,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x90C,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xFD8,07:03:51 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xFD8,07:03:51 INFO] Mounted
    [SERVICE: 0xFD8,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xFD8,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x90C,07:03:51 INFO] <0x4> GetFormatType() returned unknown format 0
    The iPod updater logging file cannot be found.

    I had this same exact issue happen to me this morning, and I lost 40 gigs worth of transferring in restoring it. I put a few albums on for the day, and when I tried connecting again this evening, the same thing happened. It hit me when it happened the second time that both times I had the iPod locked when it connected it to the computer. I'm pretty sure I've never accidentally connected it while locked before. My guess it that it is unable to read the content since the iPod is locked, and somehow this causes some sort of corruption that prevents it from seeing the files until a restoration is done. I would think Apple should be able to release an update which would detect if the iPod was locked and tell you to unlock it rather than to go through this process of losing all your music from the iPod. It scares me to think this could happen again simply if I am absent-minded in the future and forget to check whether it is locked or not before I connect it.

  • "iTunes cannot read the contents of the ipod", How can I fix this?

    Hello everyone, I am having trouble with my iPod touch 32GB and getting iTunes to detect it. I'm using Windows 7.
    When plugging it in tonight, I got the message "iTunes cannot read the contents of the iPod (Name). Go to the summary tab in the iPod preferences and click restore to restore this iPod to factory settings". I attemped to do this, but I then got an iTunes error "3184" and was unable to install the iPod software.
    I've tried...
    - Using a different computer
    - Using a different USB cable
    - Rebooting the iPod
    Nothing seems to work. I've read a solution as to delete one of the iTunes files on the iPod, but the iPod doesn't show up in my Windows Explorer, so I am unable to do this. The computer does however charge the battery when I have the iPod plugged in. I'm also able to still listen to music on the iPod as well.
    One other note, I had the same thing happen to my previous iPod touch. I got my original iPod touch back in December 2010. In October 2011, the iPod just died one day and I was not able to turn it on at all or charge it. When I'd plug it into the computer, I got the exact same errors and was unable to restore the iPod. I sent it in to Apple as it was still under warrenty and they sent me a replacement. Now 3 months later it's happened again. Of course the warrenty starts from the day you purchase the original, so this is no longer under warrenty despite having it for only 3 months. The only difference this time is that the battery still charges and I can still turn it on and listen to music.
    Any ideas?
    Thanks

    hi Angie!
    hmmm. is there an Apple Store convenient where you can take the ipod for a check-up?
    love, b

  • I can see my external Hard Drive on AEBS and the folders on it but not the contents of the folders

    I have a MacBook Pro running OS X 10.7.2 connected to my wireless and wired network through my AEBS.  Connected through a USB hub I have a printer and Digital Research external HDD.  When I click on the shared folder I see my HDD and can even click on it to see the folders but am unable to see the contents of any folders.  I have checked permissions on all folders when connected directly to the laptop and all seems fine.  When connected directly to the laptop I can view all files on the HDD.  I can view the contents of all the folders from my iPad when using FileBrowser but not through the MacBook.
    Does anyone have any ideas as to why the contents of the folders are not showing when accessing through AEBS?
    Help is appreciated.

    Did you map the drive? It won't show up in Explorer automatically like a jump drive or an external drive plugged directly into the PC will.
    You didn't mention the OS you're running, but what you want to do is choose "Map a network drive" and you'll see the router listed as a network device. Click on it and you should see the external drive listed. You can map it from there. 

  • Ok to Delete the Contents of the Render Files Folder?

    Hello Hello
    I remember from using various PC Video Editing programs that each program established for itself a 'Render Folder', or sometimes called an 'Auxiliary Folder'.
    This folder contained the contents of the previously rendered files as they related to a particular DVD burned project. Once rendered, the files were there to sort of help reduce the process time, (render time), required to burn another DVD disc.
    In FCE HD, there is also a folder called 'Render Files', and also another folder called 'Audio Render Files'. Naturally the contents of these folders could easily amount to 2 gigs or more depending upon the project size.
    Well - (aside from increasing Re-Rendering Time in regard to a new DVD burn), is it safe to delete the contents of the 'Render Folder' in an effort to free up hard drive space?
    Thanx
    Mike

    Hi Mike,
    You may have a couple of things mixed up.
    In FCE the Render Files and Audio Render Files folders hold the render files produced by FCE. FCE uses those render files when you play the timeline, print to video or export a movie. You can delete them at any time because you can always re-render in FCE. However, you do need to be careful at the point when you export a movie from FCE (for example, to use in iDVD)
    If you export to a QT Self-Contained movie, all the media for the movie you export (including rendered video & audio) is incorporated into the resulting QT movie file. Assuming a successful export, you no longer need the FCE render files.
    However, if you export to a QT Reference movie, you need to keep the FCE render files available when you import your project into iDVD and build your DVD structure. When iDVD encodes & multiplexes to burn your DVD, it will use the QT Reference movie, which in turn uses the FCE render files (and your original media).
    In iDVD, after you burn your DVD, you have the option of keeping the 'rendered assets'; these are iDVD render files and are inside your iDVD project file; they are not the FCE render files.
    If you really want to save time burning subsequent DVDs, in iDVD you should Save As Disk Image (instead of Burn DVD), which gives you a completely finished, fully encoded & formatted DVD disk image. You can then use the Finder, Disk Utility or Toast to burn additional DVDs for only the burn time, you won't have to go through iDVD's menus & re-rendering just to burn an additional DVD.

  • How to display the contents of the database values which are retrived.

    how to display the contents of the database values which are retrived in servlets and i am able to display the contents in the servlets and if forward to jsp using requestdespatcher,the values are to be shown in jsp one below the other.please suggest me in these........the servlet code is as shown
    while(rs.next()){
                        buffer.append(rs.getString(1));
                        buffer.append(rs.getString(2));
                        buffer.append(rs.getString(3));
                        buffer.append(rs.getString(4));
                        buffer.append(rs.getString(5));
                        buffer.append(rs.getString(6));
                        buffer.append(rs.getString(7));
                        buffer.append(rs.getString(8));
                        buffer.append(rs.getString(9));
                        buffer.append(rs.getString(10));
                        request.setAttribute("result1",buffer);
                        RequestDispatcher rq=request.getRequestDispatcher("/results.jsp");
                        rq.forward(request,response);
    in jsp iam using the getAttribute to retrieve the values as shown
    <% StringBuffer sb=(StringBuffer)request.getAttribute("result1"); %>
    <%= sb %>
    but getting the results in the stretch,i need to display the result one below the other.

    if you load it all into the buffer that is going to be very difficult. I would suggest loading it into some sort of collection. I like using an ArrayList.
    Then pass the arraylist.
    you will then on the jsp iterate through the arrayList using what every you want.. el, logic tags, scriplets.
    so something like
    ArrayList arrayList = new ArrayList();
    while(rs.next()){
    arrayList.append(rs.getString(1));
    //or possibly an arrayList of String arrays
    //maybe using nested for loops.  Inner for loop adds result to string[] then //outer adds string[] to arrayList.
    //can be done any number of ways based on your expected result set.

  • I have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code?

    i have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code? thank you!

    i inherited the website. It’s for a non-profit and is not very
    sophisticated, and neither am I in webdesign. It currently has multiple
    pages that are identical except for that body section, so whenever i change
    the navigation (in the sidebar) I have to update every html page.  I want
    to have one basic page, and just call in the different body content based
    on the link the user selects from the nav bar. How can i do that using a
    script? i am using Dreamweaver.
    ~ in love and light ~
    Jeannie
    On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

  • I am having problems with mail after upgrading to snow leopard. When I send an email to somebody, I would get a reply from them but the content of the reply were old emails from months ago. Any ideas what's going on?

    For ex. The subject of my email was "List of kids dancing this weekend". Then i would compose my email and send it to the recepient. They responded to my email with the same subject "List of kids dancing this weekend" but the content of the email was the email I received from somebody else months ago. This "phenomenon" happened serveral times already. Please help!

    Check this post out
    http://hints.macworld.com/article.php?story=20110516152604993
    Turns out the auto-complete database is a SQLite DB stored in this folder.  Probably the ownership and/or permissions are messed up on your system.  Mine (under Snow Leopard) show  ownership by me and rw privilege for all files in that directory, including MailRecents....

  • I have one out of five email address's with coxmail that opens with a blank inbox but other browsers show the content of the same inbox

    Question
    I have one out of five email address's with coxmail that opens with a blank inbox. Other browsers like opera or IE show the content of the same inbox. I've contacted cox but they tell me the problem is on my computer. I've used three different anti virus/malware scanners to eliminate all the bugs they can find. I need a firefox guru with suggestions. Thanks, Charles

    You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
    (1) Page Info > Permissions tab
    While viewing a page on the site:
    * right-click and choose View Page Info > Permissions
    * Alt+t (open the classic Tools menu) > Page Info > Permissions
    (2) about:permissions
    In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
    Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
    Any luck?

  • Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!

    Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
    Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!

    I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
    Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
    I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
    But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem.

  • Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

    Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.  

    The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
    It isn't possible to partition the TC although you can create a image area.
    The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
    Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
    http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
    Read carefully the speed of the USB drive plugged into the TC.

  • How do I combine my content from 3 external hd's and my 1 Mac Mini to my new Time Capsule (which is connected to my Mac Mini) and not have to use my external hd's again? My Mac Mini wont hold all the content on the external hd's.

    My 3 external hd's are 500GB (total 1.5TB) and my Mac Mini is 500GB (Time Capsule is connected to this). I want to be able to have all the content from all these sources stored on my Time Capsule as if I only had 1 external drive. Is this possible? It is my understanding that when Time Machine backs up my Mac Mini I have to have my external drives connected since my Mac Mini does not have enough space on it to hold all the content on the exgternal hd's. I can only connect 1 external hard drive at a time and I want to get rid of them and consolidate.
    And having to go back in time to search for files on 1 external hard drive and then back in time for the other external hard drive is not the most efficient thing to do. I would like it all in one place.
    Thank you for your help!!

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Application Support/SyncServices
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I got some books from the itunes store and put them into my library.  I created a playlist so that I could burn them to cds.  The title is there but no contents.  It won't even play the playlist.  How do I get the contents of the book?

    I got some books from the itunes store and put them into my library.  I created a playlist so that I could burn them to cds.  It won't even play the book, there are no contents.  How do I get the contents of the book?

    I'm guessing this is a problem unique to me as there have been no replies at all...  Thanks a bunch folks

Maybe you are looking for

  • Hp LaserJet 1005: drivers for Windows 7 64bits

    Hi, I recently reinstalled my windows 7  x64 Bit operating system. I tried again installing my LaserJet 1005 (not M1005), but it's not possible. I tried everything but I am not able to install the printer. Its very frustrating since I spent so much f

  • C2901, SSL_VPN and iPad/iPhone problem

    Hello, I've got C2901SEC/K9 and SSL-VPN licence. I've got problem with connectin to SSL-VPN from iPad via AnyConnect Secure Mobility Client 2.5.5112. In log II've got message: Apr 24 2012 10:27:55.563: %SSLVPN-5-SSL_TLS_ERROR: vw_ctx: UNKNOWN vw_gw:

  • The downloads window does not open

    I am running Beta 4.0b7 and whilst I am able to download files I cannot see the downloads window. I have tried selecting the window via tools and downloads but it does not appear. However, after doing this it is listed in the 'window' menu, although

  • AD Authentication across forests

    We are working with an environment with 2 AD domains, each in their own forest.  The BOE server is installed in DOMAIN1 (BOE 3.1 FP3.1, Tomcat 5.5, Windows 2003 SP2) and can authenticate DOMAIN1 AD users without issue.  We can also SSO users in DOMAI

  • How to ugrade Aperture 2.1.4 to 3.3.4?

    Hello I have Mac OS X Mountain Lion. Seeing that the Aperture Magnifier loup doesn't work anymore since my upgrade from Lion to Mountain Lion, I decided to upgrade to Aperture 3.3.4. This new version doesn't start complaining that I may not have the