Unable to specify Paper Type (i.e. Special Paper) with CR for VS2010

Hi there
I am printing a Crystal Report through code using the Crystal SDK for VS2010.
The report is sent to a specific tray and I need to also set the Paper Type as the printer tray is configured as Special Paper.
The report is first loaded as a ReportDocument, then I find and set the PaperSource via the PrintOptions.CustomPaperSource property.
I then print via PrintToPrinter.
The report is sent to the correct tray but user intervention is required on the printer for every print job to confirm that this tray can be used as the paper type sent to the printer is 'Plain Paper' and the printer tray is configured as 'Special Paper'.
I've not been able to figure out how to set the Paper Type on the report.
Does anyone know how to do this?
Regards
Edu

Hi Edu,
The short answer is you need to specify a Printer in your Add/Remove Printer list with the custom paper tray and then set the Printer to use it for the report.
Another option may be to use the PrintOutputController to handle the custom printer options.
Search using "PrintOutputController" and all of this year or possibly last year and you'll find various posts on how to adjust...
Don

Similar Messages

Arbitrary object types in PL/SQL call with OCI for Oracle 9.2

Hi,
i'm trying to develop a generic library that is able to execute a call to a pl/sql with a generic list of types.
If the objects are native (i.e. number, varchar2...) works fine, but i cannot understand how to do the same with a generic user defined object.
For example:
CREATE OR REPLACE TYPE A AS object (
     B     VARCHAR2(40),
     C          CLOB
CREATE OR REPLACE TYPE D AS object (
     E     A
And the pl/sql:
CREATE OR REPLACE PACKAGE PLSQL_EX IS
     PROCEDURE exempl (inInfo IN OUT D);
END PLSQL_EX ;
Do you have an example of how to do this ??, obviously i dont whant to use the OTT, because i want the maximum level of flexibility. I think i have to use the OCIObjectNew functions and the related ones, but i don't know how.
thanks.
Best regards,
Stefano.

Hi,
i'trying to solve the problem with this code (just use of set Object attribute and get object Attribute) , but it doesn't work:
#define SQLCA_NONE
#define ORACA_NONE
EXEC SQL BEGIN DECLARE SECTION;
     sql_context sqlCtx;
     char* dbName = "dbName";
     char* oraPwd;
     char* oraConnection;
     char* oraUsr;
EXEC SQL END DECLARE SECTION;
#include <iostream.h>
#include <stdlib.h>
#include <string>
#include <sql2oci.h>
extern "C" {
     #include <orid.h>
sword checkErr(sword status, OCIError * error)
     text errbuf[512];
     sb4 errcode = 0;
     int     errorCode = 0;
     string     errorDesc;
     switch (status) {
          case OCI_SUCCESS:
               break;
          case OCI_SUCCESS_WITH_INFO:
               OCIErrorGet((dvoid *)error, (ub4) 1, (text *) 0, &errcode, errbuf, (ub4) sizeof(errbuf), OCI_HTYPE_ERROR);
               errorDesc = (char *)errbuf;
               cout << "error: " << errorDesc << endl;
               break;
          case OCI_NEED_DATA:
               cout << "warning: NEED DATA"<< endl;
               break;
          case OCI_NO_DATA:
               cout << "warning: NO DATA" << endl;
               break;
          case OCI_ERROR:
               OCIErrorGet((dvoid *)error, (ub4) 1, (text *) 0, &errcode, errbuf, (ub4) sizeof(errbuf), OCI_HTYPE_ERROR);
               errorDesc = (char *)errbuf;
               cout << "error: " << errorDesc << endl;
               break;
          case OCI_INVALID_HANDLE:
               cout << "error: INVALID HANDLE" << endl;
               break;
          case OCI_STILL_EXECUTING:
               cout << "error: STILL EXECUTING" << endl;
               break;
          case OCI_CONTINUE:
               cout << "error: CONTINUE" << endl;
               break;
          default:
               cout << "error: ???" << endl;
               break;
     return status;
int main ()
     OCIType *           tdo;
     dvoid *           objectPointer;
     dvoid *          null_struct =(dvoid*) 0;
     OCIString *          message4AB= (OCIString *)0;
     OCIInd                ind4AB = OCI_IND_NOTNULL;
     ub4 len[] = {1};
     const char *attrName[] = {"B"};
     dvoid *               attr_null_struct =(dvoid* ) 0;
     OCIString*           newString = (OCIString*) 0;
     OCIType *          attr_tdo;
     OCIInd                newIndMessage = OCI_IND_NULL;
     OCITypeCode           typecode ;
     OCIEnv *     mEnvHandler;
     OCISvcCtx *      mSvcEnv;
     OCIError *     mErrorHandler;
     oraUsr = (char*) "gpridb";
     oraPwd = (char*) "gpridb";
     oraConnection = "ic9su002";
     sqlca sqlca;
     EXEC SQL CONTEXT ALLOCATE :sqlCtx;
     EXEC SQL CONTEXT USE :sqlCtx;
     EXEC SQL CONNECT :oraUsr IDENTIFIED BY :oraPwd AT :dbName USING :oraConnection;
     if (SQL_ERROR == SQLEnvGet(sqlCtx, &mEnvHandler) ) {
          cout << "Error during creation of environment Handler"<< endl;
          exit (1);
     if (SQL_ERROR == SQLSvcCtxGet(sqlCtx, (text *)dbName, (ub4) strlen(dbName), &mSvcEnv )) {
          cout << "Error during creation of svc Environment"<< endl;
          exit (1);
     if (SQL_ERROR == OCIHandleAlloc( mEnvHandler, (dvoid **) &mErrorHandler, (ub4) OCI_HTYPE_ERROR, 0, (dvoid **) 0)){
          cout << "cannot initialize error handler" << endl;
          exit (1);
checkErr (OCITypeByName ( mEnvHandler,mErrorHandler,mSvcEnv,(text *) 0,(ub4) 0,
               (const text *) "A", (ub4) strlen ("A"),
               (const text *)0, (ub4) 0,OCI_DURATION_SESSION,OCI_TYPEGET_ALL, &tdo),mErrorHandler);
checkErr( OCIObjectNew ( mEnvHandler, mErrorHandler, mSvcEnv,OCI_TYPECODE_OBJECT,tdo, (dvoid*)0,
               OCI_DURATION_SESSION,true ,&objectPointer),mErrorHandler);
checkErr(OCIObjectGetInd (mEnvHandler, mErrorHandler,
objectPointer, &null_struct ),mErrorHandler);
checkErr(OCIStringAssignText (mEnvHandler,mErrorHandler, (text *) "INVIO",
strlen ("INVIO") ,&message4AB),mErrorHandler);
cout << "Value in string: " << (char *) OCIStringPtr(mEnvHandler, message4AB) << endl;
checkErr(OCIObjectSetAttr (mEnvHandler, mErrorHandler, objectPointer, null_struct,
tdo, (const text **) attrName , len, (ub4) 1,(ub4 *) 0,
(ub4)0, ind4AB, &attr_null_struct,
(dvoid *) message4AB),mErrorHandler);
checkErr (OCIObjectGetAttr(mEnvHandler, mErrorHandler, objectPointer, null_struct, tdo,
               (const text **) attrName, len, 1, (ub4 *)0, (ub4)0, &newIndMessage,&attr_null_struct,
               (void **) &newString, &attr_tdo),mErrorHandler);
typecode = OCITypeTypeCode(mEnvHandler, mErrorHandler, attr_tdo);
if (newIndMessage == OCI_IND_NULL) {
          cout << "null"<< endl;
} else {
     cout << "indicator: " << newIndMessage << endl;
     switch (typecode)
     case OCI_TYPECODE_DATE : /* fixed length string */
          cout << "date" << endl;
          break;
     case OCI_TYPECODE_RAW : /* RAW */
          cout << "raw" << endl;
          break;
     case OCI_TYPECODE_CHAR : /* fixed length string */
     case OCI_TYPECODE_VARCHAR : /* varchar */
     case OCI_TYPECODE_VARCHAR2 : /* varchar2 */
          cout << "vc" << endl;
          break;
     case OCI_TYPECODE_SIGNED8:
          cout << "sign" << endl;
          break;
     case OCI_TYPECODE_UNSIGNED8:
          cout << "uns" << endl;
          break;
     case OCI_TYPECODE_OCTET:
          cout << "octet" << endl;
          break;
     case OCI_TYPECODE_UNSIGNED16: /* UNSIGNED SHORT */
     case OCI_TYPECODE_UNSIGNED32: /* UNSIGNED LONG */
     case OCI_TYPECODE_REAL: /* REAL */
     case OCI_TYPECODE_DOUBLE: /* DOUBLE */
     case OCI_TYPECODE_INTEGER: /* INT */
     case OCI_TYPECODE_SIGNED16: /* SHORT */
     case OCI_TYPECODE_SIGNED32: /* LONG */
     case OCI_TYPECODE_DECIMAL: /* DECIMAL */
     case OCI_TYPECODE_FLOAT: /* FLOAT */
     case OCI_TYPECODE_NUMBER: /* NUMBER */
          cout << "num" << endl;
          break;
     default:
          cout << "defaut" << endl;
          break;
     char p = (char ) OCIStringPtr(mEnvHandler, newString);
     cout << " read from object (" << typecode << "): " << (char *) OCIStringPtr(mEnvHandler, newString) << endl;
the output is:
Value in string: INVIO
indicator: 0
vc
read from object (9): @|

How to specify the type of table in the form parameters

How to specify the type of table in the form parameters. for example, how to specify the type of table "vacancies".
FORM getcertainday
                   USING
                   vacancies TYPE STANDARD TABLE
                   efirstday LIKE hrp9200-zfirst_day
                   lfristday LIKE hrp9200-zfirst_day.

Hi
Are you asking about subroutine program to declare a variable for perform statement etc
if it so check this coding
DATA: NUM1 TYPE I,
NUM2 TYPE I,
SUM TYPE I.
NUM1 = 2. NUM2 = 4.
PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
NUM1 = 7. NUM2 = 11.
PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
FORM ADDIT
       USING ADD_NUM1
             ADD_NUM2
       CHANGING ADD_SUM.
ADD_SUM = ADD_NUM1 + ADD_NUM2.
PERFORM OUT USING ADD_NUM1 ADD_NUM2 ADD_SUM.
ENDFORM.
FORM OUT
       USING OUT_NUM1
             OUT_NUM2
             OUT_SUM.
WRITE: / 'Sum of', OUT_NUM1, 'and', OUT_NUM2, 'is', OUT_SUM.
ENDFORM.
If your issue is some other can u explain me clearly
Regards
Pavan

Unable to save ANY types of files in Elements 5.0

Today I was working with Elements, creating a photomanipulation. This involved several layers, including a background of a beach, a horse, and some text. I've done this before with this exact same program on this exact same computer and not had too many problems. But not today.
Today when I try to save my creation, in ANY format, I get this message:
Could not save as
"C:\Users\User\...\Untitled-1.jpg" because the file is already in use or was left open.
GAHH!!!! Well of COURSE the stupid file is open, I'm working ON IT and trying to save my work!!! If I try to close the file, I get the standard question:
Save changes to the Adobe Photoshop Elements document "Untitled-1" before closing?
to which if I say yes, I get the same old crap:
Could not save as
"C:\Users\User\...\Untitled-1.jpg" because the file is already in use or was left open.
Now if I select save as *PSD or *PDD, *SOMETIMES* it acts like it has saved my work, (Instead of just saying it can't) but when I look for what I saved, all I find are a bunch of crap files that can't be opened. Example:
Cannot open 'C:\Users]User\Pictures\Photo Manips\~ps2AA0.tmp' because it is the wrong type of file.
Please note that I never actually chose to save ANY files called ~ps2aa0.tmp at any point in this process.
So I am stuck in a vicious cycle where before everything was working just fine. And it's not just editing photos or doing manipulations. I can take a brand new blank canvas, scribble a line on it with a paintbrush, and I am completely and totally unable to save even the simplest thing in ANY format whatsoever.
I tried uninstalling Elements and reinstalling it and that did absolutely nothing, except cause me to lose all the special effect brushes I spent hours downloading. And when I started it back up, I was right where I was before, it even had the same custom color preloaded on the palette, as if it did not truly uninstall AT ALL. (Just the special brushes were missing, thanks for nothing!)
My computer is maybe 8 months old now, a nice Hewlitt Packard with Vista. I specifically bought this computer so I could do more things with my art and more photos, and the first thing I loaded on it was the Bamboo tablet by Wacom, which came with Photoshop Elements 5.0 free. I've been using it ever since with hardly a problem and now today, I can't save the simplest little thing, and it is really aggravating me to death.
ANY light that anyone could shed on this would be most appreciated. I'm sure it's something extremely stupid, like I found the secret invisible "do not save anything ever again" button and somehow managed to press it. Whatever it is, I can not for the life of me figure out how to make it work like it's SUPPOSED to work. Somebody please help me before I go stark raving mad.

Further note: I have uninstalled this stupid program now THREE different times, including using a registry cleaner, which then deleted my DVD drive, thankyouverymuch. And even after I got the DVD drive back so I could reinstall the program, it was like I'd never uninstalled it (with the exception of the custom brushes still being missing) right down to the canvas size and paint color I had been using when all this started.
So uninstalling it does nothing, resetting preferences does nothing... I can not save my work, period. I've been fighting with this for about 8 hours and I am so frustrated I could just throttle someone with my bare hands for putting me through this crap.
For a product that came bundled with a $200 graphics tablet, it sure isn't worth a damn. Anybody got any ideas? I'm at my wits' end here.

Procurement Type 'X' and Special Procurement Type

Hello all,
Need some advice over this topic.
Material with procurement type 'X' can either be procured externally or manufactured in-house. The problem is :
#1. If a special procurement type that corresponds to external procurement say for example '30' is set in Material master. I don't find an option to have this converted into a process/production order.
#2. Whereas If a special procurement type that corresponds to in-house production say for example '52' is set in the Material Master. I have almost every possible function's visible.
How do i get to the view process/production order for case 1 in the 'Additional Data for MRP Element' screen of MD04 ?
Please do help out.
Regards,
Rahul

Rahul,
Please re-read the SAP help related to special procurement key.
I know for sure the answer lies in there!
Here is what the F1 help says:
Use
You use special procurement when you want to be able to override the procurement type in the material master or define the procurement type more precisely.
If the procurement type is in-house, you can nevertheless force the system to ignore the BOM and routing, and process the material as if it were externally procured, by specifying the special procurement as external.
Now please check OMD9 configuration for the SP Keys that you are testing, it will be clear.
Good luck!
Rajen

N79 (Error message :Unable to open .File type not ...

Dear nokia service manager,,
Iam sivakumar using the nokia N79 handset.Iam getting the message like this (Error message :Unable to open .File type not supported)when i was trying to open the video file shooted by some other camera.I have tried changing the format of the file..but no use ..i dont get ant suitable software converter in the internet.So kindly look into this matter as i need this very uregently...
hope its a mandatory feature as laptop and mobile interface are simple task nowadays in mobile...
pls reply me..its very urgent...thanku..

You could try Videora (http://www.videora.com/) - the downside here is that they have specific versions for specific phones, and sometimes it will makea file that plays perfectly in the desired phone but can't be shared to other models. The don't show a version for the N79, but try the N96 one because the N96 is the most similar OS to yours that they offer.

E5 - unable to open. object type not supported

hi.
2 Month back i brought Nokia E-5 Mobile and after few weeks i upgraded the Memory from 2Gb to 8GB. After copying all files from 2gb to 8gb am not able to open or install any existing programs and files. Even maps are not working. When trying to open or install the files am getting this erro " unable to open object type not supported " . Kindly help on this error.
Thanks
Velavan

I have never attempted what you did, so can't say for certain, but I don't think memory card data is meant to be copied from one card to another (unless we're talking about data files like pictures or mp3's). I don't understand what you mean by being unable to install files. Are you trying to reinstall the programs that aren't working? If your 2GB card still works normally, I suggest you format the 8 GB card, reinstall the programs to the empty card, and re-download the maps data. If the programs still give you trouble, you may need to uninstall them from the 2 GB card first, but I don't think that should be necessary. I hope that helps.

SBO Mailer Error - The specified resource type cannot be found in the image file

Hi Experts,
I have created an alert in SBO and selected email and internal option for same. I get internal message however email is not getting delivered, I checked the Event Viewer of Windows and below error is shown for SBOMail.
The description for Event ID 62 from source SBOMail cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Failed to mark records error [-1]
The specified resource type cannot be found in the image file
I can send email from sbo for other documents but the alert is not delivering email.
Please advise.
Thanks
Deepak

Hi Deepak..
Check with these threads...
http://scn.sap.com/thread/966957
http://scn.sap.com/thread/1295818
SBOMail Application log error
SBOMail error in event log
Hope Helpful
Regards
Kennedy

Java.io.IOException: unable to find the type mapping resource file

Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web service and
was able to deploy it sucessfully. I am trying to access the web service through
a jsp page. I am the error posted below on my server and " error:505 internal
server error" on the browser. Can any one please help me out with the problem.
My jsp page just displays the float value i am returing from the session bean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400> <Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Hi Manoj,
Thanks a lot for your hepl. I tried as you said and its working now.
Ramya
"manoj cheenath" <[email protected]> wrote:
Make sure that you put the client jar file generated by
clientgen in the lib directory of the jsp web app.
It looks like the runtime is unable to load
<service>.xml type mapping file. This xml file
should be in the classpath (web-inf/lib or
web-inf/classes).
-manoj
"Ramya" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web serviceand
was able to deploy it sucessfully. I am trying to access the web servicethrough
a jsp page. I am the error posted below on my server and " error:505internal
server error" on the browser. Can any one please help me out with theproblem.
My jsp page just displays the float value i am returing from the sessionbean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400><Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page
ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Unable to Find the Type Mapping Resource File (Two web services)

Hello,
I am using BEA weblogic 7.0 to deploy my applications. I have a web service and was able to deploy it sucessfully. I am trying to access this web service from another web service previously succesfully deployed too. When I call the second one, I have the next problem:
java.io.IOException: unable to find the type mapping resource file for:tuoprec.sinsesion.TuOPRecService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegistry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at tuoprec.sinsesion.TuOPRecService_Impl.<init>(TuOPRecService_Impl.java
I put the client jar file (2nd web service) obtained from the <clientgen> in the class path of the ear file (1st web service), but I have the same error.
Can anybody help me?,
jose luis

Hello,
I am using BEA weblogic 7.0 to deploy my applications. I have a web service and was able to deploy it sucessfully. I am trying to access this web service from another web service previously succesfully deployed too. When I call the second one, I have the next problem:
java.io.IOException: unable to find the type mapping resource file for:tuoprec.sinsesion.TuOPRecService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegistry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at tuoprec.sinsesion.TuOPRecService_Impl.<init>(TuOPRecService_Impl.java
I put the client jar file (2nd web service) obtained from the <clientgen> in the class path of the ear file (1st web service), but I have the same error.
Can anybody help me?,
jose luis

Hi, dear friends, I have a big problem: Since I installed OS 10.9.3 MAV (Maverick), I am unable to use Adobe CS6. Each opening Photoshop attempt, the system tells me an error of type 6 or 16. Thank you for your help, Guys, Marius SANNA

Hi, dear friends,
I have a big problem:
Since I installed OS 10.9.3 MAV (Maverick), I am unable to use Adobe CS6. Each opening Photoshop attempt, the system tells me an error of type 6 or 16.
Thank you for your help, Guys,
Marius SANNA

Which version of Photoshop do you have? The current version is 13.0.6.

Re:No Special GL are defined for A/c.Type K

Dear Experts,
Good Morning to you,
I have a issue can anybody solve me please.
Issue: Cannot make deposit payment due to error message : NO Special GL are defined for account type K special GL indicator A for reconciliation account:12345.
So friend pls guide how to close this issue.
Awaiting for your golden replies & Have a nice day, points will be assign for useful answers.
Thanks in advance,
KUMAR.

Kumar,
It is not in OBXR it is belongs to OBYR.
While creating spl gl indicator we have to give alternative recon a/c and give link between recon to alternative recon a/c i hope you missed that configuration.
please check it it is uesful assign the points....
Raj.

Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)

I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error
Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)
upon Import.
Can anyone shed some light for me on this cryptique error message?
Thanks for your review and am hopeful for a reply.

If you have the SSIS and SSDT (BIDS) installed then
I believe the DTS assemblies got derigistered, a typical outcome of corrupted software, so a full re-install would be the best option. VS +SQL Server + more
Otherwise, as a quick fix try to
reference the SSIS assemblies, like Microsoft.SQLServer.ManagedDTS.dll + more.
They are by default in C:\Program Files\Microsoft SQL Server\<number>\SDK\Assemblies.
Arthur
MyBlog
Twitter

Unable to create the type with the name 'ODATA'

On a test server with VS 2012 and SQL 2012 installed, I have created an SSIS project in project deployment mode. In the packages of the project I use the Odata source for SSIS. The packages run fine in VS 2012. But when I deploy the package to the Integration
Services catalog on the same server as where I am running VS 2012 I get a deployment error:
‘Failed to deploy project. For more information, query the operation_messages view for the operation identifier '25084'. (Microsoft SQL Server, Error: 27203)'
When I read this message from the SSISDB database, I see the problem with ODATA.
use SSISDB
go
select * from catalog.operation_messages where operation_id = 25084
--Failed to deploy the project. Fix the problems and try again later.:Unable to create the type with the name 'ODATA'.
As I said: the packages with the Odata run without error when tested from within VS2012 on the SAME server. When I deploy the project from Visual Studio I get the error.
For completeness: I have also tried deployment from VS2012 to another server where the SSIS Odata source has bene deployed. Also to no avail.
Jan D'Hondt - SQL server BI development

The next possiblity for me was to convert the project to Package deployment and see what the result I get. I have converted my project with package connections from project deployment to Package deployment. Then I deployed the package on the server in MSDB
catalog from SSIS. I.e. I connect with SSMS to Integration Services as an administrator and under the MSDB folder I added a new folder for my package. I then imported the dtsx into the mdsb package store. The Import worked. Still from within SSMS and connected
to the Integration Services, i right-clicked on the package in the MSDB store and selected 'Run package'. In the Execute Package dialog window, I clicked on 'Execute' and the package actually ran. The Odata connector was opened, it read the data and imported
into my database.
This experience made me realize what the real culprit was: The OData connector is a 32-bit connector in SQL Server 2012.
To prove this: with SSMS I connected to the SQL database server and in the Integration services catalog, i right-clicked on the package that was deployed in Project deployment mode, then selected 'Execute...'. In the execute dialog windo in the 'Advanced'
tab I checked 32-bit runtime. And the package ran.
To wrap it all up:
The Project deployment will work, but not with the Odata source as project connection. The Odata connection must be defined in each package as a package connection.
Run the deployed packages in 32-bit mode on the server
Jan D'Hondt - SQL server BI development

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

Unable to specify Paper Type (i.e. Special Paper) with CR for VS2010

Similar Messages

Maybe you are looking for