Unable to test MPEG-4 files using fmscheck.exe

I am trying to run fmscheck.exe to test server status
i am using bat file with code:
set /A counter = 0
:start
start /B fmscheck.exe --host localhost --app vod --play sample 0 all --timeout 360 --logfile output_log.txt
set /A counter = %counter% + 1
IF %counter% LEQ 9 goto :start
I have sample.flv and sample1_1500kbps.mpeg-4 file in my application\vod\media folder.
When i run sample file using code given above it runs successfully
But when i input
start /B fmscheck.exe --host localhost --app vod --play sample1_1500kbps 0 all --timeout 360 --logfile output_log.txt
it gives error: File NOT found
I tried this command:
start /B fmscheck.exe --host localhost --app vod --play mp4:sample1_1500kbps 0 all --timeout 360 --logfile output_log.txt
it gives error: File NOT found
What is the problem here?

I was making a mistake.
Correct command  is
start /B fmscheck.exe --host localhost --app vod --play mp4:sample1_1500kbps.f4v 0 all --timeout 360 --logfile output_log.txt
thanks.

Similar Messages

  • Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

    Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

    Hi,
    Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
    Thanks,
    Shakti K

  • Unable to load/play sound files using SoundEngine_LoadEffect

    Hi All,
    I am able to load/play sound files using SoundEngine_LoadBackgroundMusicTrack but unable to load/play sound files using SoundEngine_LoadEffect on iPhone Simulator. I am using the SoundEngine.h/cpp from Crash Landing. Oddly enough sound effects load and play succesffully when i start the app with 'Start with Performance Tool'. Does anyone know what is actually going on.
    Also i would like to know what is the difference between playing sound files using these two methods. What are the restrictions on individual sound file types for each method.
    Thanks

    I was able to load/run the sound effects after using Simulator - iPhoneOS 2.1 in the Active Target/Build drop down on Xcode toolbar. Both Active SDK, and Active Executable should be 2.1 in order to play the sound effects.

  • Unable to see the uploaded file using gos object

    Hi Experts,
    I uploaded the file to server by using the below code. But I am unable to see the uploaded file. Please help me out hot to view the uploaded files (list the file name and view the content) (i want to upload the file by getting the url as input and by clicking the button)
    Code to upload the file.
    DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
      DATA: l_attachment        TYPE swo_typeid.
      DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
      obj-objkey  = req_num.
      obj-objtype = objtype.
      CREATE OBJECT lo_gos_service.
      CALL METHOD lo_gos_service->create_attachment
        EXPORTING
          is_object     = obj
        IMPORTING
          ep_attachment = l_attachment.
    I tyied with this to view the files but the attachement link is disabled. (i want to view the files by clicking the icon-GOS icon in tool bar)
      DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
      DATA: l_attachment        TYPE swo_typeid.
      DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
      obj-objtype = objtype.
      obj-objkey = req_num.
      CREATE OBJECT manager
        EXPORTING
          is_object = obj
        EXCEPTIONS
          OTHERS    = 1.
    Please help me out how to view the file and list.
    thanks & regards
    T.Tamodarane
    Edited by: T.Tamodarane on Oct 23, 2009 9:55 AM
    Edited by: T.Tamodarane on Oct 23, 2009 9:56 AM

    Hi,
    Please post ur thred below:
    PL/SQL
    Regards
    Meher Irk

  • Unable to see D800 raw files - using Lightroom 3.6 & CS4

    Hi,
    I have just purchased a Nikon D800 and I am unable to see the .NEF files within either Lightroom 3.6 or CS4. Can anyone help me? I have read on other forums that you need to install ACR6.7 but those users were all using newer versions of software.  I have downloaded ACR 6.7 - are my programme versions compatible and will LR & Bridge pick up the new version automaticaaly or do I need to do anything? I am running Windows 7.
    I'm not sure if this will make any difference but within my camera menu I chose NEF (RAW) recording to be Lossless Compressed.
    Thanks
    Jo

    ACR 6.7 can only be used with PS CS5. You will have to use one of the following options.
    1. Use the latest Adobe DNG converter 6.7 to convert your .NEF files to dng (retain a copy of the .NEF's) then you can import into LR 3.6.
    2. Consider upgrading to LR 4, you can download the LR 4.1 RC2 and run for the trial period untill the Final LR 4.1 is released.

  • Premiere CS3 - unable to open MPEG-4 files

    Hi!
    I have footage from 2 different cameras. Project involved combining these 2 for DVD as end destination. Half of the footage is in quicktime format and the other half is MPEG-4. I am unable to import the MPEG-4 files into Premiere - I get the error Unsupported format or damaged file. Any suggestions? Thanks.

    Any suggestions on these lines?
    First, take Harm's, and then Jim's advice to heart. G-Spot will tell you all about these files.
    Also, exploration of some of the other H.264 CODEC's might yield better results (look closely at Jim's comments first). Some find that Apple's works best, some like Lead's better and others have better results from MainConcept's H.264. Remember, look at Jim's comments, as AVCHD will be a different animal.
    Good luck,
    Hunt

  • HT3775 mpeg-2 file using OS 10.8.2 and Quicktime Player 10.2

    I'm trying to open an mpeg-2 file with Quicktime Player 10.2 and OS 10.8.2. Apple says the playback component for earlier versions of Quicktime is already built in to this version, but I'm getting video only--no audio. My Sony blue ray player has no trouble playing the same file via a flash drive and the USB port. Is there a component or an update that I need?

    Try VLC Player
    http://www.videolan.org/vlc/download-macosx.html
    Cheers
    Pete

  • Issue with building solution file using devenv.exe

    Hi,
    I am facing an issue while building my solution file (developed in Visual Studio 2010) using devenv.exe from command line. The error is as below.
    C:\Code\trunnk\common\Controller\Controller.vcxproj : error  : The expression "[System.IO.Path]::Combine(C:\Code\trunk\common\Controller\, "C:\Code\trunk\out/Release/x64"\Controller.exe)" cannot be evaluated. Illegal characters in
    path.  C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets
    Could you please help me in understanding the above error and fixing it.

    Thanks for all the information. Currently i've tried to use both modules (TextCodepageConversionBean and XMLAnonymizerBean) in my Sender File Adapter, but for now without any result...
    To describe the situation: i am using flatfiles which i am fetched from the file system (NFS) by the Sender File Adapter. To translate the characters to the XML strucutre, the File Content Conversion protocol is been used.
    The content conversion defines the structure base on the first two characters on each row in the flat file. This worked fine till one of our suppliers is delivering BOM characters like "EF BB BF" in the beginning of the file.The content conversion is not able to recognize my header characters in this situation, which will normally start with "01".
    Any suggestions?

  • When trying to open .xps file, I told Firefox to AUTOMATICALLY open all .xps files using xpsviewer.exe & now it opens MANY tabs once I double click on .xps file! How do I stop this?

    When trying to open an .xps file, I told Firefox to AUTOMATICALLY open all .xps files in the future using xpsviewer.exe & now it opens MANY, MANY tabs FAST and continually once I double click on .xps file! How do I stop this? How do I UNselect the AUTOMATIC feature? I do not see where to do this. Also, How DO I open a .xps file successfully in Firefox once this first problem is solved?

    See:
    *https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

  • Unable to create a pdf file using the print routine

    Hey all,
    Recently, i've been unable to create a pdf using the print routine from quickbooks, word, outlook, etc... using the print routine and the adobe pdf driver....
    I have vista and cs3... Any thoughts?
    Thanks,
    Murph
    [email address deleted by host]

    If you are trying to print to the Adobe PDF printer and that fails, try using print-to-file. Then open the file in Distiller. If the result is the desired PDF, then check for AcroTray running as a background application. Sometimes it has to be restarted, but should be in your startup (you can check msconfig from the start>run menu to see if AcroTray is there).

  • Unable to Test Idoc to File scenario

    Hi All,
    I am doing Idoc to file scenario.But dont know how to test this scenario.
    I have done all the configuration in Backend and XIServer system.
    Please help me out.
    Thanks in Advance.
    Regards,
    Vikas

    HI
    Chech that these steps have been done
    SAP R/3
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (We21)
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Create Partner Profile (WE20)
    a) Create New
    b) Create the Partner no. name as same the logical system name of the destination system.
    c) Select Partner type LS
    d) Enter details for Type: US/USER, Agent, and Lang.
    e) Click on the + button to select the message type.
    f) Select Partner no. and LS which ever create above.
    g) Select Message type
    h) Select Process code related to the Message type.
    I) save.
    One these are done
    1) U can trigger the the IDOC by scheduled job in BD87 immediately after the       document is saved in R/3
    2) Using transactions like bd10 and bd12 u can trigger IDOC for master data
    3) While creating the partner profile there is a option “trigger immediately” . By enabling this option the idoc gets triggered.
    4) Using the transaction WE19 u can trigger the IDOC mannually
    Regards
    Santhosh

  • Unable to print a PDF file using the BI Publishing server

    Hi,
    I have a BI publisher server version 10.1.3.4.2 on W2K3 43 bit.
    I can access through the url that server.
    From my desktop I access through an url my Oracle APEX application.
    It has been configures with:
    Report Printing:
    Print Server Protocol: Advanced (requires Oracle BI Publisher)
    Print Server Protocol: HTTP
    Print Server Host Address: the IP address of my BI Publisher server
    Print Server POrt: 9704 (from instllation of BI)
    Print Server Script: /xmlpserver/convert
    On the page I want to print, it is configured with:
    Download:
    PDF option is checked.
    When I click on Action -> Download -> PDF for this page, I get the error:
    <file>. pdf file can not be opened because the file type is not supported or because it is damaged (because, for example as an e-mail attachment is not sent and correctly decoded)
    Does someone has an idea what the problem is and where I should investigate further?
    Thanks by advance for tips.
    Kind Regards.

    If you are trying to print to the Adobe PDF printer and that fails, try using print-to-file. Then open the file in Distiller. If the result is the desired PDF, then check for AcroTray running as a background application. Sometimes it has to be restarted, but should be in your startup (you can check msconfig from the start>run menu to see if AcroTray is there).

  • Unable to open newly created files using a specific font.

    Hello everyone!
    All of a sudden, I am not able to open newly created files in Acrobat Pro 9.0 that use a specific font. It seems to be localized to files that are created in Microsoft Words, as I tried to create a document in Pages and was able to open that PDF (using the same font) in Acrobat. I'm not sure what to do at this point...Any ideas?

    Hi,
    If you have recently upgraded to Mac OS X 10.6.7, then have a look here:http://forums.adobe.com/message/3593533#3593533, where Steve Werner had the solution.
    Niall

  • Unable to programmatically rename a file using rename()

    I'm using a Javascript that will export as JPG a series of images from an AI file (that part is working fine), then rename them (that part isn't working). Writing and troubleshooting with Extendscript.
    Trying to eliminate as many possible places to go wrong, I came up with the following:
    myfile = new File; myfile = myfile.openDlg();
    var newName = "NEW.ai";
    myfile.rename(newName);
    When run targeting Illustrator, it does nothing.
    When run targeting ExtendScript, for some reason this blasts the file into oblivion, never to be found again.

    Hmmm, although I split the creation of a new file object into two steps, I wouldn't expect that to result in the file dissappearing on the rename step. Must be the difference between openDlg and openDialog...ah! According to the Javascript Reference, openDlg() returns an array while openDialog() returns the file.
    So I was renaming an array of files (even if there was only one file in the array), but since the old script didn't return an error when it ran (it just disappeared the file), it must have successfully written incomplete name data. I probably have a hidden file somewhere for each time the old script errored.
    Mark, it's always wonderful to learn something from you.

  • Missing Plugins.  Unable to open InDesign CS4 file, using CS3.

    There are various updates InDesign CS3 available;
    Adobe InDesign 5.0.2, 5.0.3, and 5.0.4.dmg etc, plus 'Digital Editions'.
    Which one provides correct plugins to allow opening of a CS4 originated file in CS3?
    Alternatively, is there a link which provides a utility which will automatically detect which
    plugins you require to update from CS3>CS4?
    Thanks very much.

    My script in this thread: http://forums.adobe.com/message/4071273 will identify with what version of ID a file is created, which may be helpful at times. (Aside, you may be the first to try it with CS3 -- so it might not work.)
    Nothing to be ashamed of on your side, really. That infernally misleading "upgrade your plugins" 'error' dialog has been confusing first-time users from the very first time some lazy programmer at Adobe opted for a quick shortcut in programming and be at home before rush hour.

Maybe you are looking for