Unable to trace JButton event

hello there,
iam creating a JButton on which iam setting an imageicon .
instead of the image path to the constructor of jbutton iam passing the
byte array of that image.
now the problem is when i click on that button, iam unable to trace in the actionperformed method that this particular button was clicked.
any help in this regard is mostly appreciated.
bye

sorry. a small correction to the above sentence
iam creating that image through the byte array which is passed to the constructor of the ImageIcon. now this imageicon object is passed to the constructor of the jbutton.

Similar Messages

How can we trace the event

Hello Expert,
We have a lot of process chain which was trigger by one event with different variant. However, since the last two days, the process chain did not run. it seems the event was not triggered.
How can we trace the event? I mean, if it is triggered or not within one day.
As I checked the process chain, some of the process chain was successfully triggered by the same event. it is really weird...
Thanks
XY
Edited by: xy chen on Nov 6, 2008 3:24 AM
Edited by: xy chen on Nov 6, 2008 3:30 AM

Hi......
Copy the event...........then go to SE16 >> RSEVENTHEAD............there in the event field give the event name.........then execute............from there you will get the event collector name................
If you don't get it here then search in table RSEVENTCHAIN.........
Copy the event and go to RSA1OLD(if you are in 7.0)............otherwise go to RSA1...............from there go to the Event collector........give the event collector name and check whether it registered or not............if registered when last it was registered.............if you are unable to find this event in these two chains............then go SM37................from there choose the event..........and in the Job field write BI_PROCESS_TRIGGER..............from there check when this job last triggered for this event.............
Hope this helps.........
Regards,
Debjani........
Edited by: Debjani Mukherjee on Nov 6, 2008 4:44 AM

How to trace an event

Hi,
I want to trace an event. I goto transaction swels and switch on and I create a material using MM01 and then I goto transaction swels and switch off. There after I execute transaction swel. But I get trace on and trace off only. Material creation event I am not getting.
What may be the problem. Please suggest.
Thanks and regards,
Venkat
Edited by: VENKAT RAMAN on Aug 12, 2009 9:58 AM

Hello,
If your requirement is to start a workflow for the creation of a material, please make an entry in the tcode SWECwith the following inputs,
Change doc. object = MATERIAL
Object Type = BUS1001006 or the BO that you are going to use, but make sure that the key fields of the change document object and the business object are same.
Event = Event of the BO.
check the 'On Create' radio button for Triggering event.
Hope this will help.
Thanks,
Samson

Unable to Edit any event in iCal

I am unable to edit any event in I cal, the only options I have available to me is to accept or decline the event, Help

Ok cool, I have changed the time displayed to Military 24H in Time and Date setting ... while keeping my International region to Canada ... and iCAl still seems to be working well! Great!
Again thank you very much! I have recently transitioned from WIN to MAC and this was making me crazy!
- a.

Unable to create new events in iCal

I updated my iPhone 4 to iOS7, and now when I try to create a new event in iCal, nothing happens. I am able to tap the "+" and enter the event information, but when I tap "Done", no new event appears in the calendar.
If I, instead, create the event in the Calendar on my PC, the phone syncs with Outlook, and the event appears on the phone's iCal app.
Why am I suddenly unable to create new events on my phone in iOS7, and how can I fix this issue?

Thanks! I've noticed the phone has been a bit "clunky" since the update too. Did you experience the same thing & did the hard restart help?

Unable to open the events in Iphoto or transfer photos to create a book?

Unable to open the events in Iphoto or transfer photos to create a book. The events are there but I am when double clicking they are not opening up. Also I am unable to drag photos to create a book. Any suggestions??

Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder Window should open with the file selected. Does it?
Regards
TD

Unable to view the events saved on my iPhone on my MacBook's calendar/iCloud

Unable to view the events saved on my iPhone on my MacBook's calendar/iCloud
When looking through my calendar via my MacBook/iCloud, I am only seeing people's birthdays from my contacts and not seeing any events saved from my iPhone4s. Is there any logical explanation for this? My settings perhaps? I've been trying, but to no avail.

varunsharmaapplefan
http://support.apple.com/kb/ht5209 might help you. An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror. If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music. You should have no problem playing your iTunes over airplay though.
This may also help http://support.apple.com/kb/HT4437
Regards
Jules

User unable to create recurring events on public calendar.

As the title says, I have a user that is unable to create recurring events on a public calendar.
I have given full rights to the user even as owner and it still will not create recurring events.
I'm convinced its a permissions issue, but have no idea where to look any more. I've temporarily added the user in domain admins just to test, and it works! Why would this fix it? Why is being set as owner of the calendar not enough?
She just keeps getting "You do not have permission to modify some or all of these items in this folder."

What rights does she have on the folder? You might try revoking her rights, then adding them back.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
Rights were set to Publishing Editor.
I changed the permissions to none and even removed folder visible. Confirmed she had no access and added them back. Still fails.
Then removed user account from permissions list, confirmed, added back, tested, failed.

Data Access Service is unable to log audit events to the security event log

Hi,
Scenario: SCOM 2012 R2 UR4. (Windows 2012 R2)
Today SCOM have generated 4 alerts Data Access Service is unable to log audit events to the security event log.
The service account for "System Center Data Access Service" service is "Local System".
The users at "Generate security audits" are: LOCAL SERVICE and NETWORK SERVICE.
The question is:
how to resolve this alert? (Where look for to obtain more information to resolve this problem)
Thanks in advance!

Local system account is differet to local service account. Fo detail description of these accounts, pls. refer
LocalService Account
http://msdn.microsoft.com/en-us/library/windows/desktop/ms684188(v=vs.85).aspx
LocalSystem Account
http://msdn.microsoft.com/en-us/library/windows/desktop/ms684190(v=vs.85).aspx
Generate security audits which is under Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment of Group policy, determines which accounts can be used by a process to add entries to the security log. This user right
is defined in the Default Domain Controller Group Policy object (GPO) and in the local security policy of workstations and servers. By default, only the LocalSystem account has the privilege to be used by processes to generate security audits.
For identified the SDK account
1) open services.msc
2) From the system Center Data Access Service, you can see the SDK logon on as account
Roger

Hello my name is jordan arthur, I had an iphone 4s and was stolen and was unable to trace it by searching my iphone, would you track them through your system?

hello my name is jordan arthur, I had an iphone 4s and was stolen and was unable to trace it by searching my iphone, would you track them through your system?

This is a user-to-user technical support forum. You cannot communicate with Apple in this forum. But to answer your question, Apple cannot track a phone for you. Only you can track it, and only if Find my iPhone was enabled on it, and only them if it is powered on and connected to a cellular or WiFi network.

N9 update: Unable to trace installation package de...

Hello
I got an issue updating PR1.2 for N9. I have developer packages installed. Two remaining packages were not updated otherwise the update was succesful.
devtools-memory
devtools-debug
Packages give me messages
Can't install
Unable to trace installation package dependencies
Files in /etc if they are any help:
$ ls -l /etc/apt/
total 40
drwxr-xr-x 2 root root 4096 Mar 4 19:17 apt.conf.d
drwxr-xr-x 2 root root 4096 Jun 30 2011 preferences.d
-rw------- 1 root root 0 Aug 31 2011 secring.gpg
drwxr-xr-x 2 root root 4096 Aug 31 2011 sources.list.d
-rw------- 1 root root 1200 Aug 31 2011 trustdb.gpg
-rw------- 1 root root 9025 Aug 31 2011 trusted.gpg
drwxr-xr-x 2 root root 4096 Jun 30 2011 trusted.gpg.d
-rw------- 1 root root 7849 Aug 31 2011 trusted.gpg~
$ ls -l /etc/apt/sources.list.d/
total 8
-rw-r--r-- 1 root root 222 Mar 4 19:13 aegis.ssu-keyring-001.list
-rw-r--r-- 1 root osa 22 Mar 4 19:18 osa.list
$ cat /etc/apt/sources.list.d/aegis.ssu-keyring-001.list
deb https://[email protected]/harmattan/001 ./
deb https://[email protected]/harmattan/apps ./
deb https://[email protected]/harmattan/tools ./
$ cat /etc/apt/sources.list.d/osa.list
deb-exec /usr/bin/osa
Any hint for workaround or is there update batch coming?
Jalomann

I would like to get at least some kind of statement should I reinstall all the devtools packages or is there something wrong with the dependencies. See following printout:
~ # apt-get install devtools-memory
Reading package lists...
Done
The following packages have unmet dependencies: devtools-memory:
Depends: valgrind but it is not going to be installed
E: Broken packages
~ # apt-get install valgrind
Reading package lists...
Done
The following information may help to resolve the situation:
The following packages have unmet dependencies: valgrind:
Depends: libc6-dbg but it is not going to be installed
E: Broken packages
~ # apt-get install libc6-dbg
Reading package lists...
Done
The following information may help to resolve the situation:
The following packages have unmet dependencies: libc6-dbg:
Depends: libc6 (= 2.10-0maemo18.1+0m6) but 2.10-0maemo20+0m7 is to be installed
E: Broken packages

Unable to trigger my event

dear experts,
                        I need to add some extra features to title bar of my alv report.i got some documents and iam trying on that.Here in my program its displaying the newly created icon but when i click on that icon its not displaying or teriigering my event -
class lcl_event_receiver definition deferred.
TYPE-POOLS: ICON.
data: con type ref to cl_gui_custom_container,
      gr_alvgrid type ref to cl_gui_alv_grid.
DATA: ITAB_EXCLUDE TYPE UI_FUNCTIONS.
DATA: WA_EXCLUDE TYPE UI_FUNC.
data: it_toolbar TYPE stb_button.
data: begin of itab occurs 0.
        include structure mara.
data: end of itab.
data: event_receiver TYPE REF TO LCL_EVENT_RECEIVER.
select * from mara into table itab.
call screen 1000.
      CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    class-methods: handle_toolbar for event toolbar of cl_gui_alv_grid importing e_object e_interactive,
    handle_menu_buttons for event menu_button of cl_gui_alv_grid importing e_object e_ucomm,
    handle_USER_COMMAND for event user_command   of cl_gui_alv_grid importing e_ucomm.
ENDCLASS.                    "lcl_event_receiver DEFINITION
      CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver implementation.
method handle_toolbar.
    move 'DETAIL-TAIL' TO IT_TOOLBAR-FUNCTION.
    MOVE ICON_DETAIL TO IT_TOOLBAR-ICON.
    MOVE 2 TO IT_TOOLBAR-BUTN_TYPE.
    APPEND IT_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
ENDMETHOD.                    "handle_toolbar
METHOD HANDLE_MENU_BUTTONS.
    IF E_UCOMM = 'DETAIL'.
      CALL METHOD e_object->add_function
        EXPORTING
          fcode = 'DISPLAY'
          text = 'DISPLAY'.
    ENDIF.
ENDMETHOD.                    "HANDLE_MENU_BUTTONS
METHOD handle_user_command.
    CASE e_ucomm.
      WHEN 'DISPLAY'.
        MESSAGE 'Menu Clicked' TYPE 'I'.
    ENDCASE.
ENDMETHOD.                           "handle_user_command
ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION
MODULE STATUS_1000 OUTPUT
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CREATE OBJECT CON
    EXPORTING
   PARENT                      =
      CONTAINER_NAME              = 'CO_CON'
   STYLE                       =
   LIFETIME                    = lifetime_default
   REPID                       =
   DYNNR                       =
   NO_AUTODEF_PROGID_DYNNR     =
EXCEPTIONS
   CNTL_ERROR                  = 1
   CNTL_SYSTEM_ERROR           = 2
   CREATE_ERROR                = 3
   LIFETIME_ERROR              = 4
   LIFETIME_DYNPRO_DYNPRO_LINK = 5
   others                      = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT GR_ALVGRID
    EXPORTING
    I_SHELLSTYLE      = 0
    I_LIFETIME        =
      I_PARENT           = CON
    I_APPL_EVENTS     = space
    I_PARENTDBG       =
    I_APPLOGPARENT    =
    I_GRAPHICSPARENT =
    I_NAME            =
    I_FCAT_COMPLETE   = SPACE
EXCEPTIONS
    ERROR_CNTL_CREATE = 1
    ERROR_CNTL_INIT   = 2
    ERROR_CNTL_LINK   = 3
    ERROR_DP_CREATE   = 4
    others            = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WA_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_MAXIMUM.
APPEND WA_EXCLUDE TO ITAB_EXCLUDE.
WA_EXCLUDE = CL_GUI_ALV_GRID=>MC_mb_SUM.
APPEND WA_EXCLUDE TO ITAB_EXCLUDE.
CALL METHOD GR_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
   I_BUFFER_ACTIVE               =
   I_BYPASSING_BUFFER            =
   I_CONSISTENCY_CHECK           =
      I_STRUCTURE_NAME              = 'MARA'
   IS_VARIANT                    =
   I_SAVE                        =
   I_DEFAULT                     = 'X'
   IS_LAYOUT                     =
   IS_PRINT                      =
   IT_SPECIAL_GROUPS             =
      IT_TOOLBAR_EXCLUDING          = ITAB_EXCLUDE
   IT_HYPERLINK                  =
   IT_ALV_GRAPHICS               =
   IT_EXCEPT_QINFO               =
   IR_SALV_ADAPTER               =
    CHANGING
      IT_OUTTAB                     = ITAB[]
   IT_FIELDCATALOG               =
   IT_SORT                       =
   IT_FILTER                     =
EXCEPTIONS
   INVALID_PARAMETER_COMBINATION = 1
   PROGRAM_ERROR                 = 2
   TOO_MANY_LINES                = 3
   others                        = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command
              event_receiver->handle_menu_buttons
              event_receiver->handle_toolbar FOR ALL INSTANCES. "*Calling the interactive toolbar method of ALV
CALL METHOD GR_ALVGRID->set_toolbar_interactive.
ENDMODULE.                 " STATUS_1000 OUTPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE USER_COMMAND_1000 INPUT.
ENDMODULE.                 " USER_COMMAND_1000 INPUT

hi marcin, thanks a lot for your help..i have coded but still unable to trigger user_commaned method.Could you check this in your machine-
class lcl_event_receiver definition deferred.
TYPE-POOLS: ICON.
data: con type ref to cl_gui_custom_container,
      gr_alvgrid type ref to cl_gui_alv_grid.
DATA: ITAB_EXCLUDE TYPE UI_FUNCTIONS.
DATA: WA_EXCLUDE TYPE UI_FUNC.
data: it_toolbar TYPE stb_button.
data: begin of itab occurs 0.
        include structure mara.
data: end of itab.
data: event_receiver TYPE REF TO LCL_EVENT_RECEIVER.
select * from mara into table itab.
call screen 1000.
      CLASS lcl_event_receiver DEFINITIONL
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    class-methods:
    handle_menu_buttons for event menu_button of cl_gui_alv_grid importing e_object e_ucomm,
    handle_USER_COMMAND for event user_command   of cl_gui_alv_grid importing e_ucomm,
handle_toolbar for event toolbar of cl_gui_alv_grid importing e_object e_interactive.
ENDCLASS.                    "lcl_event_receiver DEFINITION
      CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver implementation.
method handle_toolbar.
    move 'DETAIL-TAIL' TO IT_TOOLBAR-FUNCTION.
    MOVE ICON_DETAIL TO IT_TOOLBAR-ICON.
    MOVE 2 TO IT_TOOLBAR-BUTN_TYPE.
    APPEND IT_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
ENDMETHOD.                    "handle_toolbar
METHOD HANDLE_MENU_BUTTONS.
    IF E_UCOMM = 'DETAIL-TAIL'.
      CALL METHOD e_object->add_function
        EXPORTING
          fcode = 'DISPLAY-TAIL'
          text = 'DISPLAY'.
    ENDIF.
ENDMETHOD.                    "HANDLE_MENU_BUTTONS
METHOD handle_user_command.
    CASE E_UCOMM.
      WHEN 'DISPLAY-TAIL'.
        MESSAGE 'THESE IS TEST EVENT' TYPE 'I'.
        ENDCASE.
        ENDMETHOD.
        ENDCLASS.
MODULE STATUS_1000 OUTPUT
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CREATE OBJECT CON
    EXPORTING
   PARENT                      =
      CONTAINER_NAME              = 'CO_CON'
   STYLE                       =
   LIFETIME                    = lifetime_default
   REPID                       =
   DYNNR                       =
   NO_AUTODEF_PROGID_DYNNR     =
EXCEPTIONS
   CNTL_ERROR                  = 1
   CNTL_SYSTEM_ERROR           = 2
   CREATE_ERROR                = 3
   LIFETIME_ERROR              = 4
   LIFETIME_DYNPRO_DYNPRO_LINK = 5
   others                      = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT GR_ALVGRID
    EXPORTING
    I_SHELLSTYLE      = 0
    I_LIFETIME        =
      I_PARENT           = CON
    I_APPL_EVENTS     = space
    I_PARENTDBG       =
    I_APPLOGPARENT    =
    I_GRAPHICSPARENT =
    I_NAME            =
    I_FCAT_COMPLETE   = SPACE
EXCEPTIONS
    ERROR_CNTL_CREATE = 1
    ERROR_CNTL_INIT   = 2
    ERROR_CNTL_LINK   = 3
    ERROR_DP_CREATE   = 4
    others            = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WA_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_MAXIMUM.
APPEND WA_EXCLUDE TO ITAB_EXCLUDE.
WA_EXCLUDE = CL_GUI_ALV_GRID=>MC_mb_SUM.
APPEND WA_EXCLUDE TO ITAB_EXCLUDE.
CALL METHOD GR_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
   I_BUFFER_ACTIVE               =
   I_BYPASSING_BUFFER            =
   I_CONSISTENCY_CHECK           =
      I_STRUCTURE_NAME              = 'MARA'
   IS_VARIANT                    =
   I_SAVE                        =
   I_DEFAULT                     = 'X'
   IS_LAYOUT                     =
   IS_PRINT                      =
   IT_SPECIAL_GROUPS             =
      IT_TOOLBAR_EXCLUDING          = ITAB_EXCLUDE
   IT_HYPERLINK                  =
   IT_ALV_GRAPHICS               =
   IT_EXCEPT_QINFO               =
   IR_SALV_ADAPTER               =
    CHANGING
      IT_OUTTAB                     = ITAB[]
   IT_FIELDCATALOG               =
   IT_SORT                       =
   IT_FILTER                     =
EXCEPTIONS
   INVALID_PARAMETER_COMBINATION = 1
   PROGRAM_ERROR                 = 2
   TOO_MANY_LINES                = 3
   others                        = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_menu_buttons
              event_receiver->handle_toolbar
              event_receiver->handle_user_command
              FOR ALL INSTANCES.
CALL METHOD GR_ALVGRID->set_toolbar_interactive.
ENDMODULE.                 " STATUS_1000 OUTPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE USER_COMMAND_1000 INPUT.
ENDMODULE.                 " USER_COMMAND_1000 INPUT

Unable to stop the event logs on access point console

Hi team,
I have an AIR-LAP1131AG-E-K9 access point having ios c1130-k9w8-mx.124-21a.JHB1.
When I am trying to take the console of it there are many logs generated like LWAPP ...Go join the controller, Discover controller etc. and the ap is unable to register to the controller(2112 with ios version 6.0.199.4). I'm trying to enter the command but there are many event msg generated....How do i stop this event log. I tried entering the command no debug all. but still there are many logs...
I want to enter the the following commands
#lwapp ap ip address <ip addr>.
#lwapp a pip default-gateway <gateway ip addr>
#lwapp ap controller ip addr <controller ip>
#wr me
Revert me back on urgent basis
Thanks in advance..

Thanks Rashika,
Now the access point got registered to the controller..This happened becuse of country Code..
I have changed the country code to UK, Belgium it started working fine.
Initially when it was IN the access point was not getting register..
But now the problem which arised is that the user is unable to get authenticated to the radius server.
Radius server is reachable and we have done every changes required for radius server authentication.
Users are getting rejected.
Customer is saying that the radius server is in IN domain and the WLC/access point is in UK,BE and hence the users are unable to connect..
Is it so??
Rply
Thanks in advance...

Unable to raise button Event in BlackBerry Emulator

Hi All,
I've created a WebDynpro Application which invokes a BAPI on click of a button(or Link to Action). This Application s running fine on IE.
I wanted t port this on a Blackberry device. I'm testing on a BlackBerry emulator. The first view is getting displayed properly, but I'm unable to click the Button which is displayed.
How to raise this event on the BlackBerry Emulator?
Thanks and regards
RK

Hi,
Thanks for looking at my post.
@Heidi: I had already gone thru the link.
@Stefanie: I am using BlackBerry Emulator for model 7520/7920. There is no wheel(I guess I didn't understand you properly). Yes I clicked on enter button.
I'm a bit confused with the Button. In manual they said that the property 'Design' is ignored for Mobile Devices and at the same time they say if the Design is emphasized then you will get a softkey. I tried with Design Standard(which is default) and also Emphasized. I dont see any Softkey. I really don't know how a softkey looks like. I guess there will be a extra icon or button on the screen. But I don't see any.
Thanks and regards
RK

How to follow/trace an event in Xcode

How do you trace a Cocao event/message? For example, how do you follow a touch event on a UITableView cell on the iPhone screen up to the tabbleView:didSelectRowAtIndexPath: callback of a UITableViewController based class?
If I put a breakpoint in the tabbleView:didSelectRowAtIndexPath: callback I can see a call stack. How can I put breakpoint within the Cocoa/Core/Library stuff ? It seems like I can only see source code for either bottom end ( int main(int argc, char *argv[]) or top end ( didSelectRowAtIndexPath ... ) It does not seem possible to put a breakpoint on th Cocoa/core/library functions in in between.
I did figured out I could add breakpoints for something like the global 'sendEvent' but that is quite low level and still pretty far from an actual target object. How can I trace objects in between?

OOPS!!
I posted my question in the wrong community

Unable to trace JButton event

Similar Messages

Maybe you are looking for