Unable to type the maximum limit in scientific notation in a plot

Hi,
I am trying to plot some data that I measured in scientific notation (2E-19, etc) and I have tried everything to manually set the maximum/minimum limits of my plot in either axis without success. I have typed 2E-19 and even the number will all the preceding zeros, but I keep getting a "0" in the field. Does anyone know how to do this?
Thank you!

Thanks for the reply. Here is an example. I need to set the maximum limit of the y axis to 4E-19 (box highlighted in blue in the format bar of the screen shot)

Similar Messages

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

http://support.apple.com/kb/HT4627

The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin

Hi There,
When i try to view info-path form item getting warning (This issue is not with all items but for some of them...)
"The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin............."
Thanks in advance!!
Regards
Vikas Mishra
Vikas Mishra

HI Vikas,
to resolve this do this from central admin
Ensure to follow the below steps.
                                         i.    Open
the central administration
                                        ii.    Go
to General Application Settings
                                       iii.    InfoPath
Form Services
                                      iv.    Configure
InfoPath Form Services
                                       v.    Click
on Data Connection Response Size
                                      vi.    By
default it is 1500 kilobytes
                                     vii.    Change
the Response Size in kilobytes (Increase the number).
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

My keyboard is not working, especially the letter a. I need to set up a new password but i'm unable to type the letter a. is there any way we can do it online to get access to my documents?

my keyboard is not working, especially the letter a. I need to set up a new password but i'm unable to type the letter a. is there any way we can do it online to get access to my documents?

my passwors begins with the lettera

What happens when the maximum limit of DataBase partitiong is reached

Hello,
We are using SQL server 2012 which allows 15000 partitions per table.
We are partitioning tables on the primary ID (e.g. periodID) of one of the tables.
As of now we have data for all the period in the DB. I am wondering that if we reach the maximum partition limit allowed by SQL server then what is the suggested approach?

Hi Rachana,
I have not tried it myself so I do not know. I suppose, it would just fail to create new partition. However, I heard some stories about performance issues, mainly related to subotimal execution plan choices in the systems with a few thousands partitions.
Frankly, I would not be surprised to see such problems. Under the hood, every partition becomes "individual table" with data in clustered and aligned nonclustered indexes sorted on partition scope. In any case, I would consider systems with thousands
of partitions are the edge cases. You rarely find them in the real life and some inefficiencies and problems could slip through the cracks in the test plans.
I would also suspect that number of partitions in DW systems is less important than in OLTP due to the query patterns - scans vs. seeks.
With all being said, I would consider such designs as impractical. Partitioning is management feature, which helps to address a few challenges, such as improving system availability with piecemeal restore; implementing tiered storage; improve concurrency
during ETL processes; implementing sliding window scenario; etc. I can see very little benefits of creating large number of partitions. Obviously, in some cases it could be beneficial to have a few dozens of operational (actively accessed and volatile) data
partitions. However, you rarely have the case to implement large number of partitions on historical/old data. Administrative overhead could easily outweight any benefits here.
For example, if I needed to architect partitioning on the large OLTP table that stores data for several years, I would partition operational data (weekly, monthly - depends on the requirements); partition previous-year data on quarterly or yearly basis and
keep older data in the single partition. Tiered storage and availability SLAs would become the most critical factors in the decision.
In fact, I would consider to combine both, partitioned views and partitioned tables together keeping recent data in the separate tables to improve accuracy of index statistics and old data in partitioned tables using partitioned views on top of that. But
it is the subject of another discussion.
Thank you!
Dmitri V. Korotkevitch (MVP, MCM, MCPD)
My blog: http://aboutsqlserver.com

Need help regarding the maximum limit for data type

Hi,
this is Sravan. for my application am inserting the bulk data in XML format into a column of Database table.
the sample inserted XML data will be in format... like
'<ACC count = "10">
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
<Acc ac_no = "1111111111" cn_nr = "US" eflag = "Y" />
</ACC>'
this data in XML can have more than 1000 accounts.
now, i need to take a Parameter value from XML node and write into a file. for this i have written a procedure by looping the Nodes from XML data and building Dynamic Query like..
if nvl(v_int, 0) > 0 then
v_sql := '';
     for v_count in 1..v_int
     loop
     if v_sql is null then
          v_sql := 'select extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@ac_no'')||extractvalue(empdetails, ''/ACC/Acc' || v_count
||'/@cn_nr'')||extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@eflag'') string from sample1';
     elsif v_sql is not null then
               v_sql := v_sql || ' union all select extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@ac_no'')||extractvalue(empdetails, ''/ACC/Acc' || v_count
||'/@cn_nr'')||extractvalue(empdetails, ''/ACC/Acc' || v_count ||'/@eflag'') string from sample1';
          end if;
     end loop;
end if;
i will get this variable "v_int" from <ACC count = "10"> ACC count Attribute, here 10 is the value for v_int variable but in real time the variable value can be more than 1000.
at the time of Building Dynamic Query I make using the Variable v_SQL which is of Data Type "Long",
this variable stores dynamic query which is build at the time of executing procedure but this v_sql Variable is throughing Exception that ....
"numeric or value error Character String Buffer is Too Small"... but Long Data type will store upto 2GB..
this variable cant able to hold much data which is dynamically build.
will you please help me to resolve this issue Or will u suggest me another method to pick the data from XML column.
thanks,
sravan.

user11176969 wrote:
i changed the code, now its working fine.
direct assigning the dynamic query to a Clob variable raised error.
for dynamic query building i used another variable and assigned this variable value to actual query variable.Nice!

I had sound control locked in previous IOS but now in IOS 7 I am unable to change the volume limit in settings and there is no ability to enter my password

I locked the volume control on halfway for my daughter's Iphone but when we update to IOS 7 it seems to have permanently locked it in at this level with no options to enter my password to change it (the slide bar is greyed out)

Have you turned the iPad off then back on? That often helps with problems.

On iPhone 4S, how can I change the calculator display to scientific notation?

I know how about the horizontal display. Is there a way to change from fixed point display to scientific or engineering display?

No, but there are LOTS of calculator apps in the app store.

What is the maximum size limit for a KM document to be uploaded?

Hi,
1. I have a requirement, wherein the user wants to upload a document which is more than 448MB in KM.
I am not sure what is the maximum limit that standard SAP provides by default, which I can advice the user at the first place.
2. what if we want to increase the max limit of the size?Where do we do that, can you suggest me the path for the same?
Thanks in advance.
Regards
DK

Hello,
CM Repository in DB Mode:
If there is a large number of write requests in your CM usage scenario, set up the CM repository in database mode. Since all documents are stored in the database, this avoids unintentional
external manipulation of the data.
CM Repository in FSDB Mode:
In this mode, the file system is predominant. If files are removed from or added to the file system, the database is updated automatically.
If you mainly have read requests, choose a mode in which content is stored in the file system. If this is the case, make sure that access to the relevant part of the file system is denied or
restricted to other applications.
What is the maximum size of the document that we can upload in a CM (DB) and CM (FSDB) without compromising the performance ?
There are the following restrictions for the databases used:
· Maximum number of resources (folders, documents) in a repository instance
   FSDB: No restriction (possibly limited by file system restrictions)
   DBFS and DB: 2,147,483,648
· Maximum size of an individual resource:
   FSDB: No restriction (possibly limited by file system restrictions)
   DBFS: 8 exabytes (MS SQL Server 2000), 2 GB (Oracle)
   DB: 2 GB
Maximum length of large property values (string type):2,147,583,647 byte
What is the impact on the performance of Knowledge Management Platform and on Portal Platform when there are large number of documents that are in sizes somewhere from 100 MB to 500 MB or more.
The performance of the KM and Portal platform is dependent on the type of activity the user is trying to perform. That is a heavy number of retrievals of the large documents stored in the repository for
read/write mode decreases the performance of the patform. Searching and indexing in the documents will also take a propertionate amount of time.
For details, please refer to,
http://help.sap.com, Goto "KM Platform" and then,
Knowledge Management Platform   > Administration Guide
System Administration   > System Configuration
Content Management Configuration   > Repositories and Repository
Managers    > Internal Repositories   > CM Repository Manager
Technically speaking the VM has a restriction according to plattform. W2k is somewhere around 1,2G and Solaris, I believe, 4G.
Say for instance I was on a W2k box I allotted 500+ for my J2EE Engine that would leave me with the possiblity to upload close to 600mb documents max.
See if the attached documents (610134, 634689, 552522) can provide you some guidance for setting your VM to meet your needs.
SUN Documentation
Java HotSpot VM Options
        http://java.sun.com/docs/hotspot/VMOptions.html
How to tune Garbage collection on JVM 1.3.1
        http://java.sun.com/docs/hotspot/gc/index.html
Big Heaps and Intimate Shared Memory (ISM)
        http://java.sun.com/docs/hotspot/ism.html
Kind Regards,
Shabnam.

Maximum limit of total length of all the characters for a custom OM infotyp

Hi,
Can anyone let me know whats the maximum limit of total character length for a OM infotype.
I need to create an OM infotype using PPCI Tcode.
When I am defining the HRI Structure....when total length of all the field is exceeding 900 I am unable to create infotype....I want to confirm whether it is some configuration problem or whether max limit set by SAP is 900 ?

Hi,
The max length of infoobject is 60
for more info
Re: Creating OM infotype
/people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
Thanks!
Edited by: M Prasanth on Jan 19, 2009 1:01 PM

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB

Dear sir/madam
I installed exchange server 2013
my clients want to attache more than 10 MB
when they attache more than 10 MB they got this massage "The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB"
so how can you help me to increase the attachment size and the way to do that
how can I change the default 10 MB
Please can you help me as soon as
Rawa Zangana

Hi Rawa,
You can use EAC or EMS to set the MaxSendSize. The default value of MaxSendSize is 10 MB.
If you use EAC, here is the steps:
Logon to EAC -> Mail flow -> Receive connectors -> settings-> type the Maximum send message size you want to set
If you use EMS, please use the cmdlet Rajith provided.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

What is the Maximum Size limit for a Mailbox?

Hi,
I am a newbie to mac, before i use pc and Ms Outlook for the email application.
Can anyone help me on these question:
A. What is the maximum limit of a mailbox size?
(in Ms Outlook, the max size of the .pst file is 2gb, we will have problem when our email mailboxes getting close to 2gb.)
B. If the mailbox reaches the max. limit, how can we archives the old email?
Thanks &Regards,
Prasti.
061122
macbookpro Mac OS X (10.4.8)

Hi Prasti.
I believe the following article answers your questions:
Overstuffed mailbox is unexpectedly empty

Maximum limit of characters in the "IN" caluse

Hi,
Could any one please tell me what is the maximum limit of characters I can use in the âINâ clause?
I am getting the error when executing the query by using more than 1000 items ids in "IN" clause:
"SELECT * from test where item_id IN ('4a00dec880003900', '4a00dec88000259a','4a00dec88000259a','4a00dec880000518â, ............................., up to more than 1000 item ids)â
Thanks in advance.
Regards,
Ashok

You are limited to 1000 elements. There is no character limit, other than the one imposed by the limit on the number of elements.
If you have more than a couple dozen elements, I would generally suggest throwing them in a table and doing
WHERE item_id IN (SELECT item_id FROM <<new table>>)which can have an unlimited number of elements.
Additionally, note that when you start having a large number of elements, you are often better served using an EXISTS clause rather than an IN clause.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How can i increase the maximum size of a text column in Access

hello,
i am inserting data in the MS-Access database through my servlet and am getting the exception whenever the length of the text data is more than 255 characters as in Access the maximum size for character data column is 255 can anyone tell me if there is any way by which i can increase the maximum limit of the column size in Access ,i.e. to make it more than 255.

A text field in Access has a maximum size of 255 characters. If you want to store text information in Access larger than 255, you need to use the memo rather than text data type. There are special considerations for using an Access memo data type and accessing it through JDBC. Specifically, I believe it must be accessed as a binary object (BLOB), rather than text when using the JDBC-ODBC bridge. There are lots of discussions within these forums regarding how to manage, and the issues with using the Access memo data type.
Good luck!

ORA-22290: operation would exceed the maximum number of opened files or LOB

i am getting this error in a procedure.
ORA-22290: operation would exceed the maximum number of opened files or LOBs
22290, 00000, "operation would exceed the maximum number of opened files or LOBs"
// *Cause: The number of open files or LOBs has reached the maximum limit.
// *Action: Close some of the opened files or LOBs and retry the operation.
NAME TYPE VALUE
session_max_open_files integer 10
Procuedure:
CREATE OR REPLACE PROCEDURE WMSOWN."PROC_WMS_XML_READ"
P_EVENT_KEY IN VARCHAR2,
X_STATUS_MSG OUT VARCHAR2,
X_STATUS OUT NUMBER
)AS
l_parser dbms_xmlparser.Parser;
domdoc xmldom.DOMDocument;
nodelist XMLDOM.DOMNODELIST;
node XMLDOM.DOMNODE;
n_child XMLDOM.DOMNODE;
elements XMLDOM.DOMELEMENT;
name_node_map XMLDOM.DOMNAMEDNODEMAP;
parent_seg varchar2(4000);
tag_name_bkp varchar2(4000); -- LOOK OUT BRAD IS CODING AGAIN
chile_seg VARCHAR2(4000);
p_seg VARCHAR2(4000);
p_seg1 VARCHAR2(4000);
p_seg2 VARCHAR2(30);
p_int_name VARCHAR2(50);
col_value VARCHAR2(100):=NULL;
len1 NUMBER;
cnt NUMBER;
seg_id_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
sequence_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_sequence NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_seq_set VARCHAR2(3); --brad coding
parent_id number; ---brad coding
valid_seg NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
data_status VARCHAR2(10);
v_main_seg VARCHAR2(50);
v_seq_no NUMBER;
V_CLOBLOCATOR CLOB;
V_FILELOCATOR BFILE;
v_amount_to_load NUMBER;
dest_offset NUMBER := 1;
src_offset NUMBER := 1;
lang_context NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
warning NUMBER;
v_event_name USR_OUB_FILE_PROCESS_DETAILS.EVENT_NAME%TYPE;
v_file_name USR_OUB_FILE_PROCESS_DETAILS.FILE_NAME%TYPE;
DIRECTORY_PATH_INVALID EXCEPTION;
PRAGMA EXCEPTION_INIT(DIRECTORY_PATH_INVALID,-22285);
NO_PRIVILEGES EXCEPTION;
PRAGMA EXCEPTION_INIT(NO_PRIVILEGES,-22286);
INVALID_DIRECTORY EXCEPTION;
PRAGMA EXCEPTION_INIT(INVALID_DIRECTORY,-22287);
FILE_NOT_FOUND EXCEPTION;
PRAGMA EXCEPTION_INIT(FILE_NOT_FOUND,-22289);
P_DIRECTORY VARCHAR2(50) :='WMS_XML_DIR_OUB';
v_whid poldat_view.wh_id%type;
BEGIN
--NAME : PROC_WMS_XML_READ.PLS
--DESCRIPTION :
-- Procedure PROC_WMS_XML_READ search XML files from remote location.
-- Open,Parse and Read XML files. Store all XML values into tables.
-- Developed by Dharmesh Patidar(jw782)
-- History: New condition is added i.e. p_seg:=parent_seg to maintain PARENT and CHILD relationship
-- by Vishwanath Dubey(jl246) on 17-June-2011
-- BRAD_XML_DEBUG table removed for CLEANING Activity by DHARMESH PATIDAR(JW782) ON 29-JUNE-2011.
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID START*/
BEGIN
SELECT event_name,file_name,WAREHOUSE_ID
INTO v_event_name, v_file_name,v_whid
FROM usr_oub_file_process_details
WHERE event_id=p_event_key
AND process_flag='U';
EXCEPTION
WHEN NO_DATA_FOUND THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Record is not available in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN TOO_MANY_ROWS THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : More than one Records found in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN VALUE_ERROR THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Varibale length is small or data type mismatch while selecting event id and event name in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting event name and event id ';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID END*/
/*LOGIC TO READ XML FROM REMOTE LOCATION START*/
DBMS_LOB.CREATETEMPORARY(V_CLOBLOCATOR, TRUE);
V_FILELOCATOR := BFILENAME(P_DIRECTORY,V_FILE_NAME);
DBMS_LOB.OPEN(V_FILELOCATOR,DBMS_LOB.FILE_READONLY);
V_AMOUNT_TO_LOAD := DBMS_LOB.GETLENGTH(V_FILELOCATOR);
DBMS_LOB.LOADCLOBFROMFILE(V_CLOBLOCATOR,
V_FILELOCATOR ,
V_AMOUNT_TO_LOAD,
DEST_OFFSET,
SRC_OFFSET,
0,
LANG_CONTEXT,
WARNING);
dbms_lob.close(V_FILELOCATOR);
/*LOGIC TO READ XML FROM REMOTE LOCATION END*/
/*Temporary Code to help with debug Clear the table before populating it with new data*/
--delete table BRAD_XML_DEBUG;
cnt:=1;
seg_id_bkp:=0;
data_status:='N';
v_seq_no:=0;
prev_seq_set:='NO';
/*create new parser.*/
l_parser := dbms_xmlparser.newParser;
dbms_xmlparser.parseClob(l_parser, replace(V_CLOBLOCATOR,'&','1x2x3x4x5'));
/*Parse the document and create a new DOM document.*/
domdoc :=dbms_xmlparser.getDocument(l_parser);
/* get all elements in the DOM*/
nodelist := XMLDOM.getElementsByTagName(DOMDoc, '*');
len1 := XMLDOM.getLength(nodelist);
/* loop through elements of the DOM */
FOR j in 1..len1-1 LOOP --MAIN LOOP START
BEGIN
/*below sql will fetch Node from table to travel xml data*/
BEGIN
SELECT int_name,tag_name
INTO p_int_name, p_seg1
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND seq_no =cnt;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN OTHERS THEN
NULL;
END;
IF cnt=1 THEN
v_main_seg:=p_seg1;
END IF;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN no_data_found THEN
null;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting interface name and tag name'||sqlerrm;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*LOGICS TO READ XML START*/
node:=XMLDOM.item(nodelist, j);
elements:=XMLDOM.makeElement(node);
parent_seg:=(xmldom.getTagName(elements));
tag_name_bkp:=(xmldom.getTagName(elements));
name_node_map:=xmldom.getAttributes(node);
n_child:=xmldom.getFirstChild(node);
col_value:=xmldom.getNodeValue(n_child);
/*get the sequence number from the interface hierarchy table */
SELECT count(1)
INTO valid_seg
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
if valid_seg>0 then
begin
SELECT seq_no
INTO sequence_bkp
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
seg_id_bkp:=seg_id_bkp+1;
p_seg:=parent_seg;--Modified by Vishwanath Dubey dated 16-jun-2011
end;
end if;
if prev_seq_set = 'NO' then
begin
prev_sequence := sequence_bkp;
prev_seq_set := 'YES';
end;
end if;
if sequence_bkp < prev_sequence then --you just moved up level(s) in the message structure
begin
select max(seg_id)
into parent_id
from usr_wms_global_xml_det
where seg_sequence = sequence_bkp-1;
prev_sequence := sequence_bkp;
end;
end if;
if sequence_bkp > prev_sequence then --you just moved down a level in the message structure
parent_id := seg_id_bkp-1;
prev_sequence := sequence_bkp;
end if;
/*end getting the hierarchy table sequence */
/*LOGICS TO READ XML END */
IF (parent_seg =p_seg1) or (parent_seg=p_seg2) THEN
if parent_seg=v_main_seg then
v_seq_no:=v_seq_no+1;
end if;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,parent_seg,seg_id_bkp,sequence_bkp,parent_id,'','','',J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END ;
p_seg:=parent_seg;
p_seg2:=P_SEG1;
cnt:=cnt+1;
ELSE
chile_seg:=parent_seg;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,p_seg,seg_id_bkp,sequence_bkp,parent_id,'',chile_seg,replace(TRIM(Col_Value),'1x2x3x4x5','&'),J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
END IF;
END LOOP; --MAIN LOOP END
dbms_xmldom.freeDocument(DOMDoc);
x_status:=0;
EXCEPTION
WHEN DIRECTORY_PATH_INVALID THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ DIRECTORY PATH IS INVALID';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN FILE_NOT_FOUND THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ INVALID XML FILE NAME OR FILE DOES NOT EXISTS';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN NO_PRIVILEGES THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ Insufficient privileges on file or directory NAME- '||p_directory||' to perform FILEOPEN operation.';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ '|| SQLERRM;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(DOMDoc);
RETURN;
END PROC_WMS_XML_READ;
Edited by: user13427480 on Feb 8, 2013 7:08 PM

when you post sql statement use also similar threads :
ORA-22290: operation would exceed the maximum number of opened files or LOB
https://kr.forums.oracle.com/forums/thread.jspa?messageID=10842417

Unable to type the maximum limit in scientific notation in a plot

Similar Messages

Maybe you are looking for