Unable to update client on multiple machines

Hi All,
I am completly new to ARD and trying out it features. I have ARD with unlimited clients. I was able to see all the machine (G5) and their client and then I tried select all the clients and selected task to "Upgrade client" which did not work at all. Then I tried selecting individual client and upgrade was successful. Can anyone tell me if I need anything special in order to run task on multiple machines at once?
Thanks,

I have just installed it today, I had the same experience. I couldn't update multiple clients at the same time, even had a problem updating some individual clients. I put it down to the client being busy at the time, it eventually did update after several tries.

Similar Messages

  • Fast Method to Install Oracle Client in multiple machines

    Hi all,
    I need to install Oracle Data Provider for NET (and all depending Oracle client SW components) in multiple client machines.
    Exist any other options (faster) without installing oracle client on each of the machines?
    Many thanks in advance.

    Hi,
    Really what i need to know is if is possible to install Oracle Data Provider for NET (and all depending Oracle client SW components) first in one client machine and then using it as "template", copy the folders of the installation of oracle and adding the appropriate registry entries in the rest client machines would be sufficient.
    I do not know if this is possible. This would greatly facilitate installation on multiple machines that i need (i have to say that the machines are in different domains).
    Someone could help me?

  • Unable to Install Mobile Client on my machine

    Hi,
    I am trying to install MSA on my machine but i am unable to do so . I have  got following installed on my machine
    JRE Version -   j2re1.4.2_09
    JSDK Version - j2sdk1.4.2_09
    SQL Server 2005 with TCP/IP protocol enabled on it .
    MSA  Version -- CRM 5.0 SP07
    Now if i  try to install the Mobile Client on my machine, it installs all the related tools like Client Console, Conntrans, IPC ,Support Centre, but does not install MSA or MSV .
    I was able to install the MSA earlier on the same machine, but when i am trying to uninstall and reinstall its not working .
    I tried removing relevant registry entries , uninstalling SQL Server and reinstalling it . Couple of restart of the machine between this , but it does not seems to work .
    Please someone let me know if you have faced this problem and a solution for the same
    Regards
    Hemant Gujrati

    Hi Hemant,
    It could be possible that not all the registry entries are removed. Please try the following:
    1. Take a backup of your registry in case we need it later
    2. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall. You will see many keys with product guids as names.
    3. Scroll through each one of them to see if any key has a value as MSA or MSV. If yes, then delete this key.
    4. Now try to run the installation of SAP CRM Mobile Client. This time, the setup should run fine.
    Hope this helps.
    Niranjan

  • How do I automatically update/distribut files to multiple machines at once?

    We use Vectorworks (CAD software) in my office and it includes, within its own application folder, a library of objects and templates.
    What I'd like to be able to do is update the files within this folder on each machine at the click of the button, preferably using my own machine as a master.
    Any ideas on how achieve this?
    We're running Mac OS X 10.4 on all machines (about a dozen) and have a server running Mac OS X Server 10.4. We also have Apple Remote Desktop.

    You can update file(s) on multiple machines using Apple Remote Desktop. Create a list (File > New List) and add the machines you want to update. Then use the "Copy" tool (Manage > Copy Items) to distribute the updated files from your machine to the target machines. There are several options for "Copy" and it depends on which version of ARD you're running.

  • SCCM 2012: update client machine policy via powershell?

    Hi,
    Does SCCM 2012 R2 have powershell command built-in to trigger update actions of SCCM client (update machine policy etc)?
    J.
    Jan Hoedt

    To update client machine using Power Shell, you can check below link
    http://blogg.alltomdeployment.se/2014/02/howto-force-remote-clients-to-update-their-sccm-clients-machine-policy-retrieval-evaluation-cycle-via-powershell/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • CLIENT UNABLE TO UPDATE from WSUS SERVER

    Dear all
    we have a WSUS server installed on windows server 2012, the clients is no longer able to download updates, getting error WindowsUpdate_80072EE2" "WindowsUpdate_dt000"
    here is the client log file
    2014-02-17 18:20:13:346 1024 f98 Misc WARNING: Send failed with hr = 80072ee2.
    2014-02-17 18:20:13:346 1024 f98 Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)>
    Bypass List used : <(null)> Auth Schemes used : <>
    2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://rwf-1:8530/selfupdate/wuident.cab>.
    error 0x80072ee2
    2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed.
    error 0x80072ee2
    2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2014-02-17 18:20:13:358 1024 f98 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2014-02-17 18:20:13:363 1024 f98 Misc Microsoft signed: Yes
    2014-02-17 18:20:13:365 1024 f98 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2014-02-17 18:20:13:371 1024 f98 Misc Microsoft signed: Yes
    2014-02-17 18:20:13:379 1024 f98 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2014-02-17 18:20:13:385 1024 f98 Misc Microsoft signed: Yes
    2014-02-17 18:20:13:400 1024 f98 Setup Determining whether a new setup handler needs to be downloaded
    2014-02-17 18:20:13:400 1024 f98 Setup SelfUpdate handler is not found.  It will be downloaded
    2014-02-17 18:20:13:400 1024 f98 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
    2014-02-17 18:20:13:403 1024 f98 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
    is already installed.
    2014-02-17 18:20:13:403 1024 f98 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
    2014-02-17 18:20:13:414 1024 f98 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
    is already installed.
    2014-02-17 18:20:13:414 1024 f98 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
    2014-02-17 18:20:13:432 1024 f98 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
    is already installed.
    2014-02-17 18:20:13:432 1024 f98 Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2014-02-17 18:20:13:723 1024 f98 PT +++++++++++  PT: Synchronizing
    server updates  +++++++++++
    2014-02-17 18:20:13:723 1024 f98 PT  + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL
    = http://rwf-1:8530/ClientWebService/client.asmx
    2014-02-17 18:20:13:858 1024 f98 PT WARNING: Cached cookie has expired or new PID is available
    2014-02-17 18:20:13:858 1024 f98 PT Initializing simple targeting cookie, clientId = 5c40eee5-ae54-4cbd-8758-a694a59ade20,
    target group = ROLMAN, DNS name = it.rolmanworld.com
    2014-02-17 18:20:13:858 1024 f98 PT  Server URL = http://rwf-1:8530/SimpleAuthWebService/SimpleAuth.asmx
    2014-02-17 18:21:14:006 1024 f98 Misc WARNING: Send failed with hr = 80072ee2.
    2014-02-17 18:21:14:006 1024 f98 Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)>
    Bypass List used : <(null)> Auth Schemes used : <>
    2014-02-17 18:21:14:006 1024 f98 PT  + Last proxy send request failed with hr = 0x80072EE2, HTTP status
    code = 0
    2014-02-17 18:21:14:006 1024 f98 PT  + Caller provided credentials = No
    2014-02-17 18:21:14:006 1024 f98 PT  + Impersonate flags = 0
    2014-02-17 18:21:14:006 1024 f98 PT  + Possible authorization schemes used = 
    2014-02-17 18:21:14:006 1024 f98 PT WARNING: GetCookie failure, error = 0x80072EE2, soap client error = 5, soap
    error code = 0, HTTP status code = 200
    2014-02-17 18:21:14:006 1024 f98 PT WARNING: PTError: 0x80072ee2
    2014-02-17 18:21:14:006 1024 f98 PT WARNING: GetCookie_WithRecovery failed : 0x80072ee2
    2014-02-17 18:21:14:006 1024 f98 PT WARNING: RefreshCookie failed: 0x80072ee2
    2014-02-17 18:21:14:006 1024 f98 PT WARNING: RefreshPTState failed: 0x80072ee2
    2014-02-17 18:21:14:006 1024 f98 PT WARNING: Sync of Updates: 0x80072ee2
    2014-02-17 18:21:14:006 1024 f98 PT WARNING: SyncServerUpdatesInternal failed: 0x80072ee2
    2014-02-17 18:21:14:006 1024 f98 Agent  * WARNING: Failed to synchronize, error = 0x80072EE2
    2014-02-17 18:21:14:009 1024 f98 Agent  * WARNING: Exit code = 0x80072EE2
    2014-02-17 18:21:14:009 1024 f98 Agent *********
    2014-02-17 18:21:14:009 1024 f98 Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-02-17 18:21:14:009 1024 f98 Agent *************
    2014-02-17 18:21:14:009 1024 f98 Agent WARNING: WU client failed Searching for update with error 0x80072ee2
    2014-02-17 18:21:14:024 1024 d9c AU >>##  RESUMED  ## AU: Search for updates [CallId = {B6B4993C-E64D-41EE-BB3B-4C0259522B34}]
    2014-02-17 18:21:14:024 1024 d9c AU  # WARNING: Search callback failed, result = 0x80072EE2
    2014-02-17 18:21:14:024 1024 d9c AU  # WARNING: Failed to find updates with error code 80072EE2
    2014-02-17 18:21:14:024 1024 d9c AU #########
    2014-02-17 18:21:14:024 1024 d9c AU ##  END  ##  AU: Search for updates [CallId = {B6B4993C-E64D-41EE-BB3B-4C0259522B34}]
    2014-02-17 18:21:14:024 1024 d9c AU #############
    2014-02-17 18:21:14:024 1024 d9c AU Successfully wrote event for AU health state:0
    2014-02-17 18:21:14:024 1024 d9c AU AU setting next detection timeout to 2014-02-17 19:21:14
    2014-02-17 18:21:14:024 1024 d9c AU Successfully wrote event for AU health state:0
    2014-02-17 18:21:14:025 1024 d9c AU Successfully wrote event for AU health state:0
    2014-02-17 18:21:19:010 1024 f98 Report REPORT EVENT: {37C49AAA-0782-441A-85BD-BC86F384B332}2014-02-17 18:21:14:009+0400 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80072ee2AutomaticUpdates Failure Software
    Synchronization Windows Update Client failed to detect with error 0x80072ee2.
    2014-02-17 18:21:19:060 1024 f98 Report CWERReporter::HandleEvents - WER report upload completed with status
    0x8
    2014-02-17 18:21:19:060 1024 f98 Report WER Report sent: 7.6.7600.256 0x80072ee2 00000000-0000-0000-0000-000000000000
    Scan 101 Managed
    2014-02-17 18:21:19:060 1024 f98 Report CWERReporter finishing event handling. (00000000)
    I've tried all the ways, restarting the services, file permissions, and many other
    PLEASE HELP
    thank you

    thank you for your reply, 
    I tried so many ways but couldn't solve it, then I removed the WSUS rule, and re-install it
    then after installing the rule i'm getting error when configuring the WSUS  ERROR : http://i.imgur.com/eqm9ViT.png
    Post install is starting
    Fatal Error: Failed to start and configure the WSUS service
    and here is the log file
    2014-02-20 08:37:47  Postinstall started
    2014-02-20 08:37:47  Detected role services: Api, UI, WidDatabase, Services
    2014-02-20 08:37:47  Start: LoadSettingsFromParameters
    2014-02-20 08:37:47  Content local is: True
    2014-02-20 08:37:47  Content directory is: E:\WSUS
    2014-02-20 08:37:47  SQL instname is: 
    2014-02-20 08:37:47  End: LoadSettingsFromParameters
    2014-02-20 08:37:47  Start: Run
    2014-02-20 08:37:47  Configuring content directory...
    2014-02-20 08:37:47  Configuring groups...
    2014-02-20 08:37:48  Starting group configuration for WSUS Administrators...
    2014-02-20 08:37:48  Found group in regsitry, attempting to use it...
    2014-02-20 08:37:48  Searching for existing group...
    2014-02-20 08:37:48  Existing group was found
    2014-02-20 08:37:48  Writing group to registry...
    2014-02-20 08:37:48  Finished group creation
    2014-02-20 08:37:48  Starting group configuration for WSUS Reporters...
    2014-02-20 08:37:48  Found group in regsitry, attempting to use it...
    2014-02-20 08:37:48  Searching for existing group...
    2014-02-20 08:37:48  Existing group was found
    2014-02-20 08:37:48  Writing group to registry...
    2014-02-20 08:37:48  Finished group creation
    2014-02-20 08:37:48  Configuring permissions...
    2014-02-20 08:37:48  Fetching content directory...
    2014-02-20 08:37:48  Fetching ContentDir from registry store
    2014-02-20 08:37:48  Value is E:\WSUS
    2014-02-20 08:37:48  Fetching group SIDs...
    2014-02-20 08:37:48  Fetching WsusAdministratorsSid from registry store
    2014-02-20 08:37:48  Value is S-1-5-21-495251104-1553465597-2720485832-1634
    2014-02-20 08:37:48  Fetching WsusReportersSid from registry store
    2014-02-20 08:37:48  Value is S-1-5-21-495251104-1553465597-2720485832-1635
    2014-02-20 08:37:48  Creating group principals...
    2014-02-20 08:37:49  Granting directory permissions...
    2014-02-20 08:37:49  Granting permissions on content directory...
    2014-02-20 08:37:49  Granting registry permissions...
    2014-02-20 08:37:49  Granting registry permissions...
    2014-02-20 08:37:49  Granting registry permissions...
    2014-02-20 08:37:49  Configuring shares...
    2014-02-20 08:37:49  Configuring network shares...
    2014-02-20 08:37:49  Fetching content directory...
    2014-02-20 08:37:49  Fetching ContentDir from registry store
    2014-02-20 08:37:49  Value is E:\WSUS
    2014-02-20 08:37:49  Fetching WSUS admin SID...
    2014-02-20 08:37:49  Fetching WsusAdministratorsSid from registry store
    2014-02-20 08:37:49  Value is S-1-5-21-495251104-1553465597-2720485832-1634
    2014-02-20 08:37:49  Content directory is local, creating content shares...
    2014-02-20 08:37:49  Creating share "UpdateServicesPackages" with path "E:\WSUS\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications) published on this WSUS system."
    2014-02-20 08:37:49  Deleting existing share...
    2014-02-20 08:37:49  Creating share...
    2014-02-20 08:37:49  Share successfully created
    2014-02-20 08:37:49  Creating share "WsusContent" with path "E:\WSUS\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
    2014-02-20 08:37:49  Deleting existing share...
    2014-02-20 08:37:49  Creating share...
    2014-02-20 08:37:49  Share successfully created
    2014-02-20 08:37:49  Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
    2014-02-20 08:37:49  Deleting existing share...
    2014-02-20 08:37:50  Creating share...
    2014-02-20 08:37:50  Share successfully created
    2014-02-20 08:37:50  Finished creating content shares
    2014-02-20 08:37:50  Configuring WID database...
    2014-02-20 08:37:50  Configuring the database...
    2014-02-20 08:37:50  Establishing DB connection...
    2014-02-20 08:37:50  Checking to see if database exists...
    2014-02-20 08:37:50  Database exists
    2014-02-20 08:37:50  Switching database to single user mode...
    2014-02-20 08:37:53  Loading install type query...
    2014-02-20 08:37:53  DECLARE @currentScriptVersion   int
    DECLARE @currentDBVersion       int
    IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
    BEGIN
        SELECT 1
    END
    ELSE
    BEGIN
        SET @currentScriptVersion = (9200 + 16384)
        SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
        IF @currentDBVersion < 926
        BEGIN
            SELECT 3
        END
        ELSE IF @currentDBVersion < @currentScriptVersion
        BEGIN
            SELECT 2
        END
        ELSE IF @currentDBVersion = @currentScriptVersion
        BEGIN
            SELECT 0
        END
        ELSE
        BEGIN
            SELECT 4
        END
    END
    2014-02-20 08:37:53  Install type is: Reinstall
    2014-02-20 08:37:53  Creating logins...
    2014-02-20 08:37:53  Fetching account info for S-1-5-20
    2014-02-20 08:37:53  Found principal
    2014-02-20 08:37:53  Found account
    2014-02-20 08:37:53  Got binary SID
    2014-02-20 08:37:53  Fetching WsusAdministratorsSid from registry store
    2014-02-20 08:37:53  Value is S-1-5-21-495251104-1553465597-2720485832-1634
    2014-02-20 08:37:53  Fetching account info for S-1-5-21-495251104-1553465597-2720485832-1634
    2014-02-20 08:37:53  Fetching account info for S-1-5-21-495251104-1553465597-2720485832-1634
    2014-02-20 08:37:53  Found principal
    2014-02-20 08:37:53  Found account
    2014-02-20 08:37:53  Got binary SID
    2014-02-20 08:37:53  Setting content location...
    2014-02-20 08:37:53  Fetching ContentDir from registry store
    2014-02-20 08:37:53  Value is E:\WSUS
    2014-02-20 08:37:53  Swtching DB to multi-user mode......
    2014-02-20 08:37:56  Finished setting multi-user mode
    2014-02-20 08:37:56  Writing DB settings to registry...
    2014-02-20 08:37:56  Marking PostInstall done for UpdateServices-WidDatabase in the registry...
    2014-02-20 08:37:56  Configuring IIS...
    2014-02-20 08:37:56  Start: ConfigureWebsite
    2014-02-20 08:37:56  Configuring website on port 8530
    2014-02-20 08:38:48  2014-02-20 08:38:10  Info      IISCustomAction    Performing Setup Action, Command /Install 
    2014-02-20 08:38:46  Info      IISCustomAction    Command /Install Succeeded
    2014-02-20 08:38:48  End: ConfigureWebsite
    2014-02-20 08:38:48  Configuring performance counters...
    2014-02-20 08:38:48  Configuring Stats.NET perf counter...
    2014-02-20 08:38:48  Configuring reporting perf counter...
    2014-02-20 08:38:48  Configuring client webservice perf counter...
    2014-02-20 08:38:48  Configuring server sync webservice perf counter...
    2014-02-20 08:38:48  Configuring API remoting perf counter...
    2014-02-20 08:38:48  Bringing services online...
    2014-02-20 08:38:48  Checking initialization status... 
    2014-02-20 08:38:48  StartServer starting...
    2014-02-20 08:38:48  Generating encryption key to write to the registry...
    2014-02-20 08:38:48  Generating encryption key to write to the database...
    2014-02-20 08:38:48  Generating encryption key succeeded...
    2014-02-20 08:38:48  Setting WSUSService to autostart...
    2014-02-20 08:38:48  WSUSService is set to autostart.
    2014-02-20 08:38:48  Starting WSUSService...
    2014-02-20 08:38:48  Failed to start WsusService. Exception: System.InvalidOperationException: Cannot start service WSUSService on computer '.'. ---> System.ComponentModel.Win32Exception: An instance of the service is already running
       --- End of inner exception stack trace ---
       at System.ServiceProcess.ServiceController.Start(String[] args)
       at Microsoft.UpdateServices.Setup.StartServer.StartServer.StartAndConfigureService()
    2014-02-20 08:38:48  Importing default detectoids.
    2014-02-20 08:38:48  Importing CriticalUpdates.xml...
    2014-02-20 08:38:49  Importing Drivers.xml...
    2014-02-20 08:38:49  Importing FeaturePacks.xml...
    2014-02-20 08:38:49  Importing MicrosoftCorporation.xml...
    2014-02-20 08:38:49  Importing SecurityUpdates.xml...
    2014-02-20 08:38:49  Importing ServicePacks.xml...
    2014-02-20 08:38:49  Importing Tools.xml...
    2014-02-20 08:38:49  Importing UpdateRollups.xml...
    2014-02-20 08:38:49  Importing Updates.xml...
    2014-02-20 08:38:49  Importing Windows.xml...
    2014-02-20 08:38:49  Importing Windows2000family.xml...
    2014-02-20 08:38:49  Importing WindowsServer2003DatacenterEdition.xml...
    2014-02-20 08:38:50  Importing WindowsServer2003Family.xml...
    2014-02-20 08:38:50  Importing WindowsXPfamily.xml...
    2014-02-20 08:38:50  Importing LocalPublisher.xml...
    2014-02-20 08:38:50  Importing LocallyPublishedPackages.xml...
    2014-02-20 08:38:50  Importing Applications.xml...
    2014-02-20 08:38:50  Importing Exchange.xml...
    2014-02-20 08:38:50  Importing Office.xml...
    2014-02-20 08:38:50  Importing SQL.xml...
    2014-02-20 08:38:50  Importing Exchange2000Server.xml...
    2014-02-20 08:38:50  Importing ExchangeServer2003.xml...
    2014-02-20 08:38:50  Importing OfficeXP.xml...
    2014-02-20 08:38:50  Importing Office2003.xml...
    2014-02-20 08:38:50  Importing SQLServer.xml...
    2014-02-20 08:38:50  Importing WindowsXP64BitEditionVersion2003.xml...
    2014-02-20 08:38:50  Importing DefinitionUpdateSusXml.xml...
    2014-02-20 08:38:50  Importing ClientServicingApiDetectoid.xml...
    2014-02-20 08:38:50  Importing default detectoids succeeded.
    2014-02-20 08:38:52  FixSubscriptionCategories failed. Exception: System.Net.WebException: The request failed with HTTP status 400: Bad Request.
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.UpdateServices.Internal.ApiRemoting.GetServerVersion()
       at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.GetServerVersion()
       at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.CreateUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
       at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer..ctor(Boolean bypassApiRemoting)
       at Microsoft.UpdateServices.Setup.StartServer.StartServer.FixSubscriptionCategories()
    2014-02-20 08:38:52  StartServer encountered errors. Exception=The request failed with HTTP status 400: Bad Request.
    2014-02-20 08:38:52  Microsoft.UpdateServices.Administration.CommandException: Failed to start and configure the WSUS service
       at Microsoft.UpdateServices.Administration.PostInstall.Run()
       at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
    PLEASE HELP
    BEST REGARDS

  • Unable to install Client on Device

    When I attempt to push a client out, I get the below log, with the notable entry being:
    ---> Unable to connect to WMI (root\ccm) on remote machine "106-K", error = 0x8004100e.
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    I've updated the schema, the account has domain admin access, windows firewall is disabled on the server and client.    No idea why I can't install the client.
    ======>Begin Processing request: "2097152126", machine name: "106-K"
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:17 PM
    1176 (0x0498)
    Execute query exec [sp_IsMPAvailable] N'BC1'
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:17 PM
    1176 (0x0498)
    ---> Trying each entry in the SMS Client Remote Installation account list
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:17 PM
    1176 (0x0498)
    ---> Attempting to connect to administrative share '\\106-K\admin$' using account 'bcon\sccm.agent'
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:17 PM
    1176 (0x0498)
    ---> Connected to administrative share on machine 106-K using account 'bcon\sccm.agent'
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:17 PM
    1176 (0x0498)
    ---> Attempting to make IPC connection to share <\\106-K\IPC$>
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:17 PM
    1176 (0x0498)
    ---> Searching for SMSClientInstall.* under '\\106-K\admin$\'
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:17 PM
    1176 (0x0498)
    ---> System OS version string "6.1.7601" converted to 6.10
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    ---> Unable to connect to WMI (root\ccm) on remote machine "106-K", error = 0x8004100e.
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    ---> Creating \ VerifyingCopying exsistance of destination directory \\106-K\admin$\ccmsetup.
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    ---> Copying client files to \\106-K\admin$\ccmsetup.
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    ---> Copying file "C:\Program Files\Microsoft Configuration Manager\bin\I386\MobileClient.tcf" to "MobileClient.tcf"
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    ---> Copying file "C:\Program Files\Microsoft Configuration Manager\bin\I386\ccmsetup.exe" to "ccmsetup.exe"
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    ---> Updated service "ccmsetup" on machine "106-K".
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    ---> ERROR: Unable to start service "ccmsetup" on machine "106-K", error = 1068.
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    ---> Failed to install CCM Client Bootstrap component on client (1068)
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    ---> Deleting SMS Client Install Lock File '\\106-K\admin$\SMSClientInstall.BC1'
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    Execute query exec [sp_CP_SetLastErrorCode] 2097152126, 1068
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    Stored request "2097152126", machine name "106-K", in queue "Retry".
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152126, 2
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    Execute query exec [sp_CP_SetLatest] 2097152126, N'03/20/2015 20:44:18', 24
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)
    <======End request: "2097152126", machine name: "106-K".
    SMS_CLIENT_CONFIG_MANAGER 3/20/2015 3:44:18 PM
    1176 (0x0498)

    I'm seeing now that it does install the ccmsetup service on the PC, but the service is not able to start.   When I attempt to manually start it, I get:
    Windows could not start the ccmsetup service on Local Computer.
    Error 1068: The dependency service or group failed to start.

  • Unable to view client logs from sccm console

    Hi
    unable to connect to ccm and unable to view client logs from console. Console installed is on another server that is not site server
    Regards Sushain KApoor

    Hi
    SCCM right click tools adds multiple ‘Client Tools’ entries
    are comming when i right click on the clients. when i check for logs it shows client logs written only. More over when i try to connect to C$ i am able to connect to from console right click tools but when i go for connecting ccm folder it says no directory
    found admin$\system32\ccm, but my machine is of 64 bit OS hence it should go to syswow64. any ideas how to resolve the same.
    i am planning to go with
    http://blog.danovich.com.au/2010/11/16/sccm-right-click-tools-adds-multiple-client-tools-entries/ this option
    Regards Sushain KApoor

  • Unable to update my Office for mac 2011

    I am unable to update my office for mac, it says that i have to type the product key. 
    Afterwords it tells me that it is wrong, but i am sure it is the right one. 

    Hi Simon,
    Although you've stated that "i am sure it is the right one", I'd like to suggest you check on this again. Verify that you are typing the product key and that you are not typing one of these other numbers:
    The CD set number
    The disc assembly number
    The part number
    A 27-character PIN
    The product key contains 25 characters. If there are 27 characters, then you have a PIN and not a product key. To obtain the 25-character product key, visit the following website, and use the 27-character PIN:
    http://www.microsoft.com/mac/getkey
    If issue persists after above check, then I'd suggest you check out this KB article and continue the troubleshooting to ensure the issue isn't caused by your machine:
    http://support.microsoft.com/kb/2390862
    Please also note that this is the forum to discuss questions and feedback for
    Windows-based Microsoft Office client. Since your query is directly related to
    Office for mac, I would suggest you to post in the forum of
    Office for Mac, where you can get more experienced responses:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Installation of different versions of GUI clients on same machine

    Hi All,
    Is there any document about how to install different versions of MDM GUI clients on same Machine.
    we have different version of MDM server in Sandbox and Developement environment. I know we can install different versions of GUI Clients by specifying different locations. But i am looking for some standard document / SAP note. Please if anyone has this information, it will be very helpful.
    Thanks and Regards,
    Shiv

    Hi Shiv,
    You can find this information regarding different Version of GUI Clients on same machine from Standard SAP Installation Guide on Page 51
    5.1 Maintaining Multiple Versions of MDM it tells that you can install multiple versions of MDM 5.5 on one host and switch between the versions.This may be useful, for example, when updating the patch level.
    Please refer to SAP Installtion guide,
    https://websmp201.sap-ag.de/~sapidb/011000358700001119842007E
    Also Check SAP Note: 1283687
    Best Regards,
    Mandeep Saini

  • Unable to load Client print control

    I know this question has been asked and I have read all of the responses.  But, I seem to have a unique problem. 
    I am using Server 2008 r2 sp2 with ie8. And my problem is getting the error Unable to Load Client Print Control on the client machine for reporting services.
    The standard answer here is that the RSClientPrint.cab needs to be loaded on the client machine and installed with a click of the print icon with admin rights.  I have done that as a administrator and the print icon works fine as an adminstrator. 
    However, when I log as a non-admin user, that is when I get the error.  The rsclientprint.dll shows up in the registry, but it just does not work for a non-admin user.
    I have a open ticket with a MSDN tech at Microsoft, but he seems to be at a loss and is not trying very many things that lead me to believe that this can be resolved.
    I am wondering if some else out here has had this problem and got it to work.
    Thanks for any help.

    Hi KeithTexas,
    It seems that the non-Administrator users don't have sufficient permissions on the “Downloaded Program Files” folder where the RSClientPrint control is stored. So, please grant to the user:
    1.Open C:\Windows, right-click on the “Downloaded Program Files” folder and click “Properties”.
    2.Switch to the “Security” tab, click “Edit”.
    3.In the “Security” window, click “Add” and add the specific user to the list.
    4.Check the “Allow” box for “Read & execute” permission and click “OK”.
    Regards, 
    Mike Yin
    TechNet Community Support

  • Unable to update iphoto or imovie Apps

    I'm unable to update my iphoto and imovie Apps, after I uptaded
    to Mavericks OS. I didn't change my Apple ID account
    and I'm getting the following error:
    "This update is for an app downloaded with a different Apple ID. Sign in with that Apple ID and try again."
    any suggestions ?

    Log out and log back in with the Apple ID you used to either set up your machine or buy the apps.

  • Managing sole iTunes library with multiple machines on-the-go with database&media on external drive?

    Hi fellows. Trying to organize & revamp my iTunes library & wish to achieve a configuration but lack the expertise to achieve it. My objectives are:
    Objectives
    +1. for my multimedia content to be stored/accessed from an external hard disk+
    +2. to keep the entire iTunes multimedia & all necessary operating files as self-contained as possible,+
    +3. Allow multiple machines to manage import of new content into library, i.e. download new episodes of podcasts, rip new music & movies into the library, sync-ing of iPod even when said machine is nowhere near my external hard disk (this is the tricky one)+
    _Justification for my objectives_
    For objective #3, it's not that I'm trying to be funny. My use case is I've 1 laptop (main machine & always at home) & 1 netbook (brought to school daily). Most of my iTunes usage will be via the stay-at-home laptop; but I may wish to add/manage new content onto my iTunes library/iPod while I'm outside (hence, decoupled from my external hard disk at home).
    I'm not trying to be funny for objective #1 either. I wish to have a streamlined process of retaining & re-instating my iTunes library meta-data across system re-format, i.e. where the iTunes library db files' location may be changed (most obvious being the new "My Music" folder path in Win7 from WinXP)
    _What I'm well aware of_
    I understand that storing/re-locating multimedia on external hard disk is no-kick to iTunes veteran. I also understand that after a new installation of iTunes, I can move the fresh copy of "iTunes_library.itl" & "iTunes_library.xml" files to my external volume & point iTunes to their new address from the 2nd launch onwards. I also understand any new machines I introduce into my environment can be directed to that exact copy of iTunes library database files when I install iTunes & pressing "Shift" key upon their launch. Lastly, I also understand that I will have no access to my multimedia files (for playback) while I'm outside, but I can still add new content, & download new podcasts & remove old content from my library/iPod
    _The question_
    However, what I have difficulty achieving, is launching iTunes on my on-the-go machine(s), without a local copy of the iTunes library database files. I doubt iTunes will be able to launch at all, & if I create a new library (just to launch iTunes), it will not possess content from my main media collection & likely to wipe out my iPod.
    _My novice attempt & its inadequacies_
    My 1st instinct, is to have the iTunes library database files stored in the cloud. More specifically, I can store them files in my DropBox folder/account, & have every machine update to a single latest version of iTunes library database files upon Internet connection. However, this method depends on:
    +* the DropBox application to exist forever,+
    +* assumed the installation path of DropBox (or any applications for that matter) to persist/remain unchanged across future versions of operating systems,+
    +* Will corrupt any un-sync-ed version of my iTunes library database files when I launched iTunes without 1st updating the local cached copy of them database files (suppose I manage my iPod playlists via iTunes on a plane)+
    _Open for recommendations_
    So here I'm, all ears to any fine recommendations you iTunes veterans have to offer. Thanx in advance.

    In case anyone is interested in these sorta thing:
    UPDATE #4: Unfortunately, if you discover you tagged something wrong after importing the songs, even when you correct the tags, iTunes will not re-organize the folder hierarchy, as long as “Keep iTunes Music folder organized“ is UNchecked, even if the songs were imported via the “Automatically add to iTunes folder” channel.
    Example: I imported a folder of Andy Lau songs into my library, unbeknownst to me, some of the songs had their “Artist” tagged as “Andy Lau“, while some had theirs tagged as “Liu De Hua“. Naturally, the 1st time round I imported them, 2 separate folders were instantiated as to iTunes, those were names of 2 distinct artists (this is expected, & acceptable behaviour). The downside is, even if I re-tagged all those songs with “Andy Lau” as the artist, iTunes will no longer re-organize & consolidate all them songs into a single “Andy Lau” artist folder (because I’d “Keep iTunes Music folder organized” UNchecked remember?)
    Well, you may suggest that I check that option when managing my future library & uncheck it right before launching/using my main, current library. The thing is, iTunes preferences persist across libraries, & one day I will forget to uncheck that option, launch my main library & lose all my current music folder structure to iTunes’ re-organization (which I don;t want, as of yet). Which brings me to another update:
    UPDATE #5: My future iTunes library has “I:/iTunes_Media” as iTunes’s “Home” folder. This setting persists even when I switch back to my main, current library. Which means, if I’d my external volume connected while launching/using my main, current library, all new content will end up in that folder on the external volume! Which messes up the whole scheme of things! Arghz!
    UPDATE #6: Here’re some updates with regards to ID3 tags:
    * the “Album Artist” in Windows (7) Explorer = the “Album Artist” field in iTunes 9
    * Modifying a ID3 tag field using Windows (7) Explorer will update BOTH the v1 & v2.3 version of the ID3 tags on the song (if the song has both versions of tags embedded & if the field exists in both tag versions). If you update the tags via iTunes, only the v2.3 tags get updated. This is surprising.
    * the “Contributing Artist” field in Windows (7) Explorer = the “Artist” field in iTunes 9 & the “Artist” field in ID3v1 tags (changes in tany of the 3 fields will affect the other 2 respectively)
    o However, iTunes Media folder organization will only adhere to the value saved in the “Album Artist” field [if you change the value of "Contributing Artist" in Windows (7) Explorer, the "Artist" field in iTunes or the "Artist" field in a song's ID3v1 tags, no folder re-organization will occur]
    UPDATE #7: Some updates with regards to workflow:
    Decided to retain all non-music content within a sub-folder named “non-music” beneath the main album folder (& take strict precautions to import songs only). The exception is “m3u” playlist files. Have read elsewhere if you import a folder of songs & there’s an “m3u” playlist inside, your library may have duplicates and/or the tags of those songs you just imported could be screwed, etc.

  • Resolution to error - Unable to update Database Statistics

    OK, If there's one thing i hate most about SAP, its the dreaded installation, I am always so paranoid, as to something will definitely go wrong,
    Lately i realized that it aint my mind , but the damn installation itself is pretty damn stupid. Why cant SAP leave the installation packaging to professionals like installshield...
    Unfortunately SAP doesnt think of it as a better idea, so until then lets try to resolve as many errors as possible thru these forums..
    Here's one error resolution ,i am pretty sure, many are checking for..
    Use the following procedure to resolve error
    <b>Warning - "loading of sql client library oci.dll failed"
    Error - Unable to update Database Statistics, Check BRCONNECT.log</b>
    The problem seems to be with the SAP Patch Collection InstallMaster disc Material No.(<b>51032143_13</b>).
    To resolve the problem, here's what needs to be done,
    1)Install DB Instance as usual.Then after the installation errors out due to loading of sql
    client library oci.dll ..
    2)I unsar the downloaded DBATOOLS.sar (Thanks for the Link Andreaz!!!)
    log into sapnet (eg. service.sap.com) with your user-id/pwd:
    -> downloads -> support packages and patches -> entry by application group -> additional
    components -> sap kernel -> now chose either 32 or 64 bit; either unicode or non-unicode ->
    sap kernel 6.40 -> windows server -> oracle -> download the package DBATOOLS Package for
    Oracle 9.2.x ... brconnect is part of that package...
    3)Copy the files in the Unsar'd package, as follows
         overwrite br*.exe to S:\usr\sap\R31\SYS\exe\run
         overwrite initSID.sap to S:\usr\sap\R31\SYS\exe\run & 
    S:\usr\sap\R31\SYS\exe\nuc\NTI386
         overwrite libsbt.dll to S:\usr\sap\R31\SYS\exe\run &
    S:\usr\sap\R31\SYS\exe\nuc\NTI386
         overwrite sapdba_role.sql to S:\usr\sap\R31\SYS\exe\run &
    S:\usr\sap\R31\SYS\exe\nuc\NTI386
    4) Retry the installation again & Guess what!! it works....
    Warning-: I initially tried a shortcut by replacing DBATOOLS.sar on the installmaster disc, rather than following above steps, but that doesnt seem to work, the installation fails as as soon as Tablespace creation starts. So the shortcut aint a good one..

    Well, it looks like you resolved your problem yourself.
    you can send feedback to SAP directly instead of posting this here in a forum.

  • Unable to update to Edge Animate 2014.1.1

    I am unable to update to the latest version of Edge Animate. I've tried using the cleaner tool, uninstalling then re-installing, signing out then in again, re-installing creative cloud, updating via the 'Upgrade Now' button in EA and more. Can Adobe staff please provide another means of updating to the latest version? I do note that Creative Cloud seems insistent that it is version 1.8.1.451 even though I've also re-installed CC several times in a number of ways.

    The latest is Creative Cloud Help | Creative Cloud app for desktop | Release Notes Version 1.8.0.447 released on October 6, 2014
    Try uninstalling the current Desktop app through your OS uninstall methods.
    Restart machine, then re-download the Desktop app here: Creative Cloud Help | Creative Cloud for desktop
    hth
    Darrell

Maybe you are looking for

  • Runtime error: CX_SHM_OUT_OF_MEMORY

    Hello Experts, I have opened one program in SE38 in Quality system which  contains so many routines.I need to check the source code of a routine say ZTEST. For that i have double clicked on the name of routine(eg. Perform ZTEST).But am getting below

  • How to use the update mechanism in Photoshop CS10 for Camera Raw?

    Good Evenning! I would like to open .NEF files with Adobe Photoshop CS10 (RAW for Nikon D5200) but my version of Camera Raw is too old. I need at least the 7.3 version. When I try to download it, I have this message: Please use the update mechanism i

  • Create external window with webdynpro application

    Hi, is it possible to create an external window with another application? The method if_wd_window_manager~create_window_for_cmp_usage would be great. But this method create only a modal popup. Greetings Marcus

  • Remove Delivery Block - ORDCHG - INBOUND

    Hi, I'm trying to remove the delivery block set in sales order ( vbak-lifsk ) using the inbound ORDCHG message idoc. i'm populating E1EDK01-LIFSK = ''. This doesnt remove delivery block from the order. ( if we try to set delivery block E1EDK01-LIFSK

  • MM Account Determination Exits

    Greetings to all Experts - We're trying to fix an issue here with inter-company processing and want account assignment for cost of sales for inter-company orders to flow to a separate cost of sales account than trade sales.  The problem is that we do