Unbound form with checkboxes
I have a 'Crossover Table' that links the following fields: ID(Autonumber), ItemID (foreign key - Number), FieldA(Text) , FieldB (Text), Field C (checkbox).
I want to create a form that will show one ItemID at a time. Like a crosstab, but not quite:
Data A Data B Data C
Datapt1 chkbx chkbx chkbx
Datapt2 chkbx chkbx chkb
Datapt3 chkbx chkbx chkbx
Code for chkbx=IIf([Data A] = "cat" AND [Datapt1] = "hamburger" AND FieldC = -1, -1, 0)
I have tried putting the table name in front of the FieldName as well.
Can this even be done.
If it can, i want to use it on a subform that will then link thru the ItemID.
My problem right now is, that it shows 9 records. If i scroll thru the 9 the chkbx shows appropriately, but i want it all on one page.
Thanks for any help you can offer.
This sounds like something for Excel spreadsheet!
If form is unbound what do you expect to be accomplished once you have clicked the desired checkboxes?
Build a little, test a little
Similar Messages
-
Hi All,
I have a form with checkboxes that I finally got to work
partially. However, there is one problem. If you forget to check
the checkbox, (Yes or No), you get the error Element is Undefined.
If you check the checkbox there is no problem and the form goes
through email. How can I correct the error if the checkboxes are
not checked. Any help would be appreciated,
Best,
JoyJoy,
checkboxes do not pass a value unless they are checked.
You can do it two ways that I know.
One way is to set a default so the page does not error:
<!--- set default so page does not error --->
<cfparam name="FORM.myCheckbox" default="" type="any">
The other way is to see if it was checked and do something
then.
<!--- If the checkbox is checked do this --->
<cfif isDefined("FORM.myCheckbox")>
do something
<!--- If the checkbox is NOT checked do this --->
<!--- don't need this cfelse if you don't want to do
anything --->
<!--- if it is not checked --->
<cfelse>
do something else
</cfif>
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"JRLobdell" <[email protected]> wrote in
message news:fb6hic$s7a$[email protected]..
> Hi All,
> I have a form with checkboxes that I finally got to work
partially. However,
> there is one problem. If you forget to check the
checkbox, (Yes or No), you
> get the error Element is Undefined. If you check the
checkbox there is no
> problem and the form goes through email. How can I
correct the error if the
> checkboxes are not checked. Any help would be
appreciated,
> Best,
> Joy
> -
How to submit a form with checkboxes in a page flow?
I'm having some trouble with a form that contains several checkboxes, and
how to submit this form within a page flow...
I have a JSP page containing a form with N checkboxes. The value and
checked/unchecked status of each checkbox is generated from parsing an XML
document. Here is the (simplified) code:
<%@ taglib uri="http://java.sun.com/jstl/xml" prefix="x" %>
<netui:form action="doUpdate">
<x:forEach select="...">
<input type="checkbox" name="id"
<x:if ...>checked</x:if> value="<x:out ... />">
</x:forEach>
<netui:anchor formSubmit="true" action="doUpdate">Submit</netui:anchor>
<netui:anchor action="doCancel">Cancel</netui:anchor>
</netui:form>
When this form is submitted, the checkbox values are lost -- the following
code (in the action) produces an empty array:
String[] prefs = this.getRequest().getParameterValues("id");
I looked at the <netui:checkbox> tag, but it does not appear to give me a
way to set the state and value (unless I've missed something).
Can I submit a form without using a form bean? If I do use a form bean, can
I set the state and value from my JSP?
Any suggestions on how to do this (or insights into what I'm doing wrong)
are welcome...
-- CraigI am new to this, but I think this may solve your problem:
I am not sure if this is what you are looking for, but you can create a LinkedHashMap
with the req key/value pairs in the page-calling action in the pageflow and then
pass that via a getRequest().setAttribute("myCheckboxes",myCheckboxHashMap);
You can then access it in code using the optionsDataSource portion of the netui:checkBoxGroup
- ie
<netui:checkBoxGroup dataSource="{actionForm.thisCheckbox}" optionsDataSource="{request.myCheckboxes}">
Hope this helps!
m
"Craig Coffin" <craig+1268fbec@nfld-dot-com> wrote:
I'm having some trouble with a form that contains several checkboxes,
and
how to submit this form within a page flow...
I have a JSP page containing a form with N checkboxes. The value and
checked/unchecked status of each checkbox is generated from parsing an
XML
document. Here is the (simplified) code:
<%@ taglib uri="http://java.sun.com/jstl/xml" prefix="x" %>
<netui:form action="doUpdate">
<x:forEach select="...">
<input type="checkbox" name="id"
<x:if ...>checked</x:if> value="<x:out ... />">
</x:forEach>
<netui:anchor formSubmit="true" action="doUpdate">Submit</netui:anchor>
<netui:anchor action="doCancel">Cancel</netui:anchor>
</netui:form>
When this form is submitted, the checkbox values are lost -- the following
code (in the action) produces an empty array:
String[] prefs = this.getRequest().getParameterValues("id");
I looked at the <netui:checkbox> tag, but it does not appear to give
me a
way to set the state and value (unless I've missed something).
Can I submit a form without using a form bean? If I do use a form bean,
can
I set the state and value from my JSP?
Any suggestions on how to do this (or insights into what I'm doing wrong)
are welcome...
-- Craig -
Need help with PHP form with checkboxes, radio buttons and file attachment
Hi guys,
I'm having a nightmare with this PHP form where a user can fill it in, attach a doc/pdf and submit. After trying to sort it out with previous code I've used, I've stripped it out and think I should just start again in the hope you geniuses can help!
Here is the HTML of contact.php:
<form action="" method="post" name="contact" id="contact">
<p>Job Title:*<br />
<input name="position" type="text" /></p>
<p>Nationality:*<br />
<select name="nationality">
<option value="">-- select one --</option>
<option value="Afghan">Afghan</option>
<option value="Albanian">Albanian</option>
<option value="Algerian">Algerian</option>
<option value="Zambian">Zambian</option>
<option value="Zimbabwean">Zimbabwean</option>
</select>
</p>
<p>Which country are you currently living in?*<br />
<select name="country">
<option value="">-- select one --</option>
<option value="United Kingdom">United Kingdom</option>
<option value="Afghanistan">Afghanistan</option>
<option value="Africa">Africa</option>
<option value="Zambia">Zambia</option>
<option value="Zimbabwe">Zimbabwe</option>
</select>
</p>
<label class="radio" for="checkRight">Yes/No question?</label><br />
<input class="radio" type="radio" name="right" value="Yes" /> Yes
<input class="radio" type="radio" name="right" value="No" /> No
<input class="radio" type="radio" name="right" value="N/A" /> Not applicable
<p>Yes/No question?<br />
<select name="continue">
<option value="">-- select one --</option>
<option value="Yes">Yes</option>
<option value="No">No</option>
</select>
</p>
<p>Select your resorts:<br />
Resort 1<input name="res1" type="checkbox" value="Resort 1" />
Resort 2<input name="res2" type="checkbox" value="Resort 2" />
Resort 3<input name="res3" type="checkbox" value="Resort 3" />
Resort 4<input name="res4" type="checkbox" value="Resort 4" />
Resort 5<input name="res5" type="checkbox" value="Resort 5" />
Resort 6<input name="res6" type="checkbox" value="Resort 6" />
</p>
<p>Don't send form unless this is checked:* <input type="checkbox" name="parttime" value="Yes" /></p>
<p>Date of arrival: <input name="arrive" id="datepick" /><br />
Date of departure: <input name="depart" id="datepick2" /></p>
<script type="text/javascript" src="assets/scripts/datepickr/datepickr.js"></script>
<link href="assets/scripts/datepickr/datepickr.css" rel="stylesheet">
<script type="text/javascript">
new datepickr('datepick');
new datepickr('datepick2', {
</script>
<p>Name:*<br />
<input name="name" type="text" /></p>
<p>E-mail:*<br />
<input name="email" type="text" /></p>
<p>Telephone:*<br />
<input name="telephone" type="text" class="ctextField" /></p>
<p>Upload CV (Word of PDF formats only):<br />
<input type="file" name="cv" class="textfield"></p>
<p><input name="submit" value="Submit Enquiry" class="submitButton" type="submit" /><div style="visibility:hidden; width:1px; height:1px"><input name="url" type="text" size="45" id="url" /></div></p>
</form>
By the way, the date boxes work so excuse the Javascript in there!
To prevent SPAM I've used a trick where there's a hidden URL field which must be left blank for the form to submit which you can see in the PHP.
Below is where I'm at with the PHP which is placed above the header of contact.php...
<?php
if (array_key_exists('submit', $_POST)) {
$position = $_POST['position'];
$arrive = $_POST['arrive'];
$nationality = $_POST['nationality'];
$parttime = $_POST['parttime'];
$depart = $_POST['depart'];
$name = $_POST['name'];
$email = $_POST['email'];
$telephone = $_POST['telephone'];
$to = "[email protected]";
$subject = "Recruitment Application";
$message = $headers;
$message .= "Name: " . $_POST["name"] . "\r\n";
$message .= "E-mail: " . $_POST["email"] . "\r\n";
$headers = "MIME-Version: 1.0\r\n";
$headers .= "Content-type: text/html; charset=iso-8859-1\r\n";
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
$headers .= 'From: My Website <[email protected]>' . "\r\n";
$message= "
$url = stripslashes($_POST["url"]);
if (!empty($url)) {
header( 'Location: http://www.go-away-spam-robots.com' );
exit();
if (!isset($warning)) {
mail($to, $subject, $message, $headers);
header( 'Location: http://www.mywebsite.co.uk/sent.php' );
?>
I would like to make pretty much all the field compulsory so if a field is left empty (other than the hidden URL field), a warning message is displayed next to that field.
Also I would like the file upload field to attach to the email that is sent to me and have the results come through to me in a table format.
Can anyone help me get my form working?
Thank you and I hope to hear from you!
SMHi Nancy,
Great stuff, thank you for the reply.
I've managed to get the Formm@iler working and running as I need it to.
The only thing I'm struggling with is when the user clicks submit, they are taken to a page of whatever results the form returned but it is just a white background with Times New Roman text.
How can I have it so the user is taken to the form results in the websites' page layout?
I tried sending them to a generic 'thank you' page by adding the following code but it just took them there whatever the results of the form so that's no good...! I have a feeling it's a bit more complicated than that...
header( 'Location: http://www.nofussbus.co.uk/test/sent.php' );
Thank you for your help! -
Using dynamic referencing in PDF Form with Checkboxes
I have created a checklist that contains approx 60-70 steps. About 20 of them are to have a checkbox that fills an adjacent field with the date, and another with the user name. I have already got this functioning as a stand alone process.
aaa = checkbox
aaadate = field for date
aaaname = field for name
[code]
function test() {
var one = this.getField("aaa");
var two = this.getField("aaadate");
if (one.value == 'Yes') {
if (two.value == "") {
this.getField("aaadate").value = util.printd("dd-mmm-yy",new Date());
this.getField("aaaname").value = identity.name;
}} else if (one.value == 'Off') {
this.getField("aaadate").value = "";
this.getField("aaaname").value = "";
[/code]
I do not want to write a piece of code for each checkbox so I am trying to figure out how to use dynamic referencing so that when i check on a checkbox, the code takes the checked checkboxes' name (aaa) and is able to determine the two other fields name by appending/concatenating (name + "date" = aaadate)
I have tried various methods and done tremendous research; I'm not sure if I lack the knowledge to incorporate what I've found properly, if I just have been looking in the wrong places for the wrong things. It seems like this should be possible in a PDF form...
Please helpYou need to inject the part of the field name that changes as a variable. So your code would be something like this:
function test(base) {
var one = this.getField(base);
var two = this.getField(base+"date");
if (one.value == 'Yes') {
if (two.value == "") {
this.getField(base+"date").value = util.printd("dd-mmm-yy",new Date());
this.getField(base+"name").value = identity.name;
} else if (one.value == 'Off') {
this.getField(base+"date").value = "";
this.getField(base+"name").value = "";
And you would call it like so:
test("aaa");
test("bbb");
etc. -
Need Help creating form with checkboxes
I am using Acrobat Standar 9, and I am trying to create a form that has a bunch of checkboxes on it. First off, the PDF that I am workin with (before I try to input form stuff) is a check list that has spots for marking (if it was printed out). Acrobat will recognize all of those places as spots for a form tool, but it always inserts textboxes. I want it to insert check boxes. So far all I can do is delete all of the textboxes that were inserted and manually, one by one, insert check boxes in all of the locations.
Is there a way to make the wizard input checkboxes instead of text boxes? If not with the wizard, is there any way to do that? (I am not familier with programming languages.. fyi)
thanksThanks for getting back to me. What I have is a pricing page. The feedback form is so we can see who views or is interested in services. We want only people who fill out this form to be able to view it. I have created simple contact forms that are sent to an email and directed to another page. The problem I am having is trying to figure a way to where hopefully if the same person comes back they won't have to fill out the form again. I know if they fill out the form and create a user name/login it could be a possible fix but I am trying to make it simple. I am just starting to learn PHP/XML (which I have copied from another sources) and haven't written my own. Maybe creating a cookie that is checked once the page is loaded? I have no idea how to do that either though... I am a front end "designer" and a lot of this is greek to me.
-
I'm creating a Flash Form and I have a group of 4 checkboxes,
and the value part of the input statement is as follows:
<cfif
Isdefined('Form.whatever1')>1<cfelse>1</cfif>
<cfif
Isdefined('Form.whatever2')>1<cfelse>1</cfif>
<cfif
Isdefined('Form.whatever3')>1<cfelse>1</cfif>
<cfif
Isdefined('Form.whatever4')>1<cfelse>1</cfif>
But when I submit the record, all of the checkboxes are
recorded as "1", even if none of them or some of them are checked.
Has anyone developed a flash form with checkboxes and experienced
similar issues?
Thanks...Oh, forgot to mention that I used the same code in a
"regular" form, and it worked. Just curious as to if this is a
known Flash Form problem -
Hi All.
I have simple form with CheckBox and Table. I show table when CheckBox is True. My code:
form1.#subform[0].CheckBox1::change - (JavaScript, client)
if (CheckBox1.rawValue == true)
Table1.presence = "hidden";
else
Table1.presence = "visible";
But I would like to hide Table in case when user open form and then when CheckBox is True show table. In case when CheckBox is False the Table is hidden. How it to do? I will appreaciate for sample.
Thanks.Hi,
this is not so difficult. You have to do the following steps:
open a new form.
insert a checkbox and a table into the form.
mark the checkbox
open the script editor (about window)
select "click-event"
write:
if (CheckBox1.rawValue == 1)
Table1.presence = "hidden";
}else
Table1.presence = "visible";
And now you have to hide the table under "object" | "presence" | "hidden (exclude from layout)"
Ready.
Kind regards Mandy
PS: Oh I haven't seen that the problem is solved. -
Problems with XML import to PDF form esp. checkboxes
I am posting this here because it was suggested to me to do so when I posted it here:
http://forums.adobe.com/message/5613723
Hi,
I work with a certain PDF form created by the US government. They recently "upgraded" the form. (N600K)
With the old form, I would import values in an XML file, which worked fine.
With the new form, I have encountered a problem:
The checkboxes behave as if they are ALL one group of radio buttons, which means only one can be selected at a time.
There are quite a few questions with checkbox answers. If I or my xml file select any one if them, the rest get cleared.
I have contacted the US government about this, but surprisingly, they have not responded.
If you are familiar with designing PDF forms and think you might be able to understand my problem and help fix it, i would love to hear from you!
Please email me at gidon.ariel @ gmail.comTundra Steve, it sounds like that, that all the checkboxes behave like one
set of radio buttons. But they aren't. They are separate sets of
checkboxes, and while some sets could behave like radio buttons
(male/female, for example), they should really all behave like the
checkboxes that they are, and allow any and all to be selected.
Thanks and God Bless,
Gidon Ariel [email protected]
cell 054-5665037, home 02-5354586, VoIP 845-445-1604
Israel fax 1532-5354586, USA fax 623-433-4874
Maale Hever, DN Har Hebron 90420 Israel
http://www.facebook.com/gidonariel http://bit.ly/gidon-linkedin
"Happy are those who have discovered
that the secret of life is to be nice to others" -
Open dialog box window with checkboxes for each child record - Please Help
Hello Everybody
I have a 10g form with master record and 20 child records. In the child record form, currently there is a “Notes” Editor, which pops up when user click the “Edit” button. In the “Notes” editor, user enters remarks if anything is missing. For example, typical remarks will be: Statement is missing, LOC paper is missing etc.
Now, I would like to replace “Notes” editor with a dialog box. In the dialog box , I would like to add checkboxes with values “Statement is missing” and “LOC paper is missing” etc. along with “Notes” field. The user can select checkboxes. The value of the checkboxes should go in the “Notes” field with the ability to edit it. This way, user doesn’t need to type the most common notes every time.
I have created a “NewNotes” dialog box with checkboxes and multiline text Item. It is pops up when I click on the button. I have also created to WHEN_CHECKBOC_CHANGED trigger for each checkboxes so that the its value will go in a multiline text item.
But, I am not sure how I can link “NewNotes” dialog box to the each record in child record block. I would really appreciate it if anybody could give me some idea.
Thanks,if i understand correctly you have a note item (based on table) on every child record? when you open the dialog box: how do you put data from notes to dialog box? in the same way as you can write it back ...
-
Problem with checkbox column in matrix
Hello.
I have a little problem with checkbox column in matrix.
Column is binded to the UserData.
It has ValOn="Y", ValOff="N".
I use C++. It is wird problem. In matrix I have 10 columns - scrollbar role and if You want see checkbox column, You must role to the right. If this column is on the screen, and I use:
checkcell->PutChecked(VARIANT_TRUE);
then the checkbox is cheched, and if the checkbox isn`t on the screen and I use this comment - it nothing happening.
I tried to use ValOn="Y", PutChecked...
The problem i solved if the column is on the screen - if the column is first in matrix or second, but if it`s last I have a big problem.
My column with checkbox is not editable, but I tried to make it editable, check it, and then make it uneditable - the same efect.
How can I solve it ?
Sorry for my english.
Kamil WydraHello Kamil,
I am not sure about your problem, but here is an example of how to use checkbox in UI API.
First, create the matrix with checkbox column in Screen painter, and the output is an xml file, like this. Type as 121 indicates that it is a check box.
- <column AffectsFormMode="0" backcolor="-1" description="" disp_desc="0" editable="0" right_just="0" title="Rented" type="121" uid="Rented" val_off="N" val_on="Y" visible="1" width="41">
<databind alias="U_RENTED" databound="1" table="@VIDS" />
<ExtendedObject />
Second, bind the column to table from DB. This is a bug of 2004 Screen Painter, so if you are using 2005 Screen Painter, there is no problem.
Third, when you open the form, you can check and uncheck the cell.
BTW, please set the editable of the column to true.
Hope this helps,
Nick -
Error in generating form with 6i
I have installed designer 6i rel 2 with form developer 6i on NT
4.0.
When in design editor, I want to generate the form with generate
module, the system generate "CDR-21600: A running Generator or
Utility has failed."
Also in action column writes: " It is possible that the internal
cache is now in an inconsistent state. You are therefore
recommended to close and restart the application."
Could anyone tell me what is the problem and how to solve it.
thanksHere is an document which describes some known causes of CDR-
21600 errors. I hope it will help you.
PURPOSE
To describe some known causes of CDI-21600 errors and to
suggest possible solutions and workarounds.
SCOPE & APPLICATION
This note was written for users of Oracle Designer releases 2.1.x
and 6.0.
CDI-21600 errors occur most frequently during Design Capture and
when generating forms with the Forms and WebServer generators.
Investigating CDI-21600 errors
In Oracle Designer Release 2.1.2 and Release 6.0, this error has
the form:
CDI-21600 'A running generator or utility has failed'
The Release 2.1.1 error message was: 'Generator or Utility throw
an Exception'
The CDI-21600 error message means that the generator is hitting
an unhandled exception, also known as a GPF (general protection
fault). The CDI-21600 error masks the underlying exception error.
To see the real error do the following:
1. Go into the Registry Editor (REGEDIT).
2. Navigate to HKEY_LOCAL_MACHINE\software\oracle\des2_70
3. Set EXCEPT_HANDLING to 0 (by default it is 1).
Repeat the action that resulted in the error.
Known Causes of CDI-21600 Errors and Possible Solutions
Some of the reasons why CDI-21600 errors occur are listed below.
1. A common cause of CDI-21600 errors is failure to install the
necessary
Developer patches.
See [NOTE:64630.1] Developer Patches required to run
Designer with Developer
2. Check that Designer is running on a supported database. Also
check that the
TNS connection is correct.
See [NOTE:60705.1] Designer Certification Matrix (HTML)
3. Check for 'dangling' foreign keys, in other words FKs no longer
owned by any
table in the repository. Delete all invalid constraints.
Invalid constraints may be created if you use the repository
dump utility to
dump and restore external foreign keys referencing tables
shared into the
application system, without dumping and restoring the tables
that own them.
If you restore a complete dump (rather than a 'skeleton' one),
and then use
the 'Reconnect Share Links' option when restoring, you may be
able to
resolve this problem.
To get a complete list of 'dangling' constraints in your
repository, connect
using SQL*Plus and use the following query:
SELECT app.name, key.name
FROM ci_application_systems app, ci_constraints key
WHERE key.table_reference IS NULL
AND key.application_system_owned_by = app.id;
You can also run CKAZANAL.ANAL_REFERENCES on your
repository and delete all
the invalid constraints that it finds. You can run the Repository
Analyzer
from: Front Panel -> Repository Administration Utility -> Utilities.
NOTE: There may be inconsistencies in the repository that the
Repository
Analyzer cannot fix. You might solve such problems by
dropping all the
tables of your application, recreate them from the ERD,
then use the
DDT and recreate your modules.
[BUG:847190] CDI-21600 during forms generation: 'dangling'
foreign key
"Since the generator is running on a repository that contains
invalid
constraints and the Repository Analyzer solves the problem,
bug closed as
unfeasible to fix."
4. Check your modules for invalid or missing references such as
missing window
placements.
5. Try generating your module against default templates and
object libraries.
6. When capturing forms or libraries, try capturing the form or
library without
application logic, then capture the application logic on its own.
See [NOTE:1064690.6] CDI-21600 when capturing design of
form with
application logic
[BUG:757541] DESCAP: CDI-21600 error reported when
capturing with
application logic
Fixed In Ver: 6.0
[BUG:926383] Duplicate of [BUG:757541] This has been fixed in
2.1.2 patch
779559. However you would be advised to apply a later patch
such as 855635
which fixes more bugs in this area.
7. Make sure that all objects that are referenced by the form have
been
captured into the repository before capturing the form.
8. A CDI-21600 will occur if a lookup usage displays only one
column of
datatype DATE or if the column of datatype DATE is displayed
as the first
item in the block.
Workaround
Add more column usages to the lookup block and do not
display the DATE data
type column usage as the first item in the block.
9. [BUG:810472] CDI-21600 when 'Argument in Caller' is set
Fixed In Ver: 6.5.3.0
Workaround
Make sure that you have an argument in the called module that
is mapped to
the "Argument Passed Value" in the calling module. The only
way to get this
mapping back once the APV has the <Module Argument> label
is to delete it
and recreate it.
10. [BUG:801736] CDI-21600 on design capture of a form with
subclassed object
Fixed In Ver: 6.0.3.1.0 (backport)
Fixed In Ver: 6.5
You have an item that has been subclassed to an object.
Checking the Design
Capture option 'Capture Control Blocks' causes the CDI-21600
error. Uncheck
'Capture Control Blocks' and the problem does not occur. Open
the FMB in
Forms*Builder and look at Data Blocks -> Items. Break the link
to the
object, save the FMB, and the form will capture (similar to
[BUG:794872]).
Alternatively, ensure the link can be established.
11. [BUG:850436] CDI-21600 on generation of a form with template
having
subclassed object group
You try to generate a form out of Designer that uses a user-
defined
template. If a collection of objects in the template is grouped
into an
object group, dragged into the object library and then either
copied or
subclassed into a form, when the form is generated you get a
CDI-21600
error.
12. [BUG:822659] Module generation fails (CDI-21600) with multi-
column PK having
long prompt text
Fixed In Ver: 6.5.3.2
Module generation with multi-column primary key having long
prompt text
causes CDI-21600 with preference MSGSFT set.
Workaround
Shorten the prompt text of PKs may not be not applicable. You
may loose end
user information.
You may have the same problem with a mandatory compound
FK. CASEOFG tries to
generate a message '<P1> must be entered', where <P1>
contains all the
prompts of the bound items from the FK. If you reduce the
length of the
prompts, or set MSGSFT = NULL or WEDI = S or property
Mandatory?=No, it
works correctly.
13. [BUG:792542] Capturing application logic causes CDI-21600
(V2 style
triggers)
Fixed In Ver: 6.5.5
After removal of the v2 triggers, the form captures/merges OK
on 5.0.24.8,
provided patch 875027 has not been applied.
14. [BUG:790877] CDI-21600 if the primary/foreign keys have no
key components
Fixed In Ver: 6.5.11
Generating a module with tables having a primary key not
correctly defined
(no PK component) will cause a CDI-21600 error. This can
occur when
unloading a module from the RON. If you pick up the module
(and only the
module) in the unload set, the table and its PK are unloaded as
a skeleton.
Loading the .DAT file into a new application will create a PK
without a
component.
15. [BUG:771549] CDI-21600 if cannot connect to the DB with
connect string in
Options (Compile)
Fixed In Ver: 6.5.13
If you cannot connect to the DB with the connect string
specified in options
(Compile), the forms generator will fail with CDI-21600.
This problem occurs when you cannot connect to the DB
because:
- the username or password is wrong;
- or the SQL*Net alias is not defined in the TNSNAMES.ORA
file;
- or the SQL*Net listener is not started;
- or the DB is down.
16. [BUG:785106] CDI-21600 when generate master detail form
with preserve layout
[BUG:855812] is a duplicate of this bug.
Fixed In Ver: 5.0.24.6.0 (Bug:860426 Backport request for 2.1.2)
Fixed In Ver: 6.0
Fixed In Ver: 6.5.3
You have a master-detail Form with the Master having items
partly on a TAB
Canvas. Generate Module works OK. You enter Forms Builder
and move some
items on the tabs (just small changes, items are still on the
same tabs).
You change the look of the Detail and change Records
Displayed. Now in
Designer you generate the Module with Preserve Layout. You
get a CDI-21600
error. The problem might reproduce without doing any changes
in Forms
Builder, just by generating with Preserve Layout.
17. [BUG:891306] If primary key column of lookup in check
constraint comment of
base table
Fixed In Ver: 6.5.5
Workaround
Do not use the name of the bound item that is based on the
primary key
column of the lookup table in a check constraint comment of
the base table.
18. [BUG:896026] Forms gen throws assertion failure in
CVINI/BUILDACTIONITEM@/CV/CVI/CVIBNI.CPP
Fixed In Ver: 6.5.7
A problem is caused by a PL/SQL definition (function, package,
procedure)
being defined as a called module for the module you are trying
to generate.
To resolve the problem and enable the module to be generated,
remove all
Called Modules that are PL/SQL definitions (functions,
procedures or
packages).
See [NOTE:2107207.6] CDI-21600 during generation of module
or Assertion
Failure \cv\cvi\cvibni.cpp
19. [BUG:812333] CDI-21600 generating a web module after
adding an unbound item
Fixed In Ver: 6.5.3.0
Backport [BUG:1280667] raised to fix by 6.0.3.9
You add an unbound item (SQL expression) to a Web module.
When you try to
generate the module you get a CDI-21600 error. If you delete the
unbound
item the Web module generates correctly.
In a test case the problem occurred during validation of the
derivation
text, if the master module component was in a different module.
A workaround
was to rearrange module components so that this was not the
case.
20. [BUG:1627963] CCVDIAG::TRACEGENERATORMESSAGE
WHEN GENERATING INCORRECT
DERIVATION EXPRESSION
Message
CDR-21605: Failed while processing Module <mod> in function
CCVDiag::TraceGeneratorMessage BOF
Cause
The generator failed due to an unexpected error - the
error indicates the object the generator was processing
when it failed.
Helena -
Form with subforms - created in LiveCycle Designer
Help!
I have a form with a subform included for each question. I want users to click on a checkbox and the subform appears with the questions for users to complete. My problem is when I test the form in preview and click on one checkbox it works. But then when I close the form, got back in again, some of the checkboxes are not working. What could be causing this issue?I just tested the form after I opening in Acrobat X Pro.... and some of the pages with the checkbox with connection to a subform is working... other pages are not.
How can I post my form in questioned....
Thanks! -
Pdf form for data from another form with data, xml or pdf, tables not expanding
Sir,
I am using Adobe Acrobat 9 Pro and LifeCylce to do these forms. I have made several subforms for a Risk Assessment for the mission they fly. I have also made up another form with tables that would connect with each subform data. This form also will give me and others a % of the values received from the data to help us with seeing problem area towards Safety.
I am able to connect the data to the form from the Risk Forms but when I go and add another group of data it over writes the data that was already in the data collection form. The tables are dynamic and able to expand with the generated data but when I compile several Risk Forms, xml. data into one single data group, the receiving tables will not except this data. To compile the data I am in Acrobat and using the form-manage form data-merge data to spreadsheet than enter as a report that is xml. Still not working. I also tried to save the form, with data already in the tables, and then opened it again and add data to it, it will over write the existing data in the form. This form does work great with the generated data in LiveCycle.
Any suggestions???Thanks Paul
Did as you said and for each subform binding tab made sure I have "Repeat subform for each data item" checkbox and still no change when I add the data.
I even tried to combine the xml data and that file just has the main page and not the data pages. just another problem that is happening.
Any other suggestions on this expanding tables and receive single forms one at a time.
Bill -
Interactive Report with Checkbox column
Hello everyone,
our users love the Interactive Report filtering, so they want all forms in apps. to behave like Interactive Reports.
I need a form where each row consists of 2 columns and a checkbox, that handles some flag. I can create checkboxes using APEX_ITEM, however, the filtering on such column look ridicolous. I would like to have a tabular form (with one editable checkbox column), but with all those Interactive Report filtering features.
Is there any example (or inspiration) how to achieve such functionality?
Thanks a lot!
AdamHello Adam,
Why don't you just switch off the Filtering option for that column?
(Go to the Interactive Report, click on your column, then in Column Definition you can (un)check the features for that column).
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)
Maybe you are looking for
-
Motion 4 crashes while trying to save or export
The program works fine when I'm in it, but crashes the minute I try to save or export. Here is what I have tried to do so far. First I just unistalled Motion from a article I found off of Apple's website and then re-installed. Didn't work. I then
-
Scheduling Agreements Change History
Hello, I was trying to track the changes of Scheduling Agreements (VA33) but could not. The "Display Changes" option in the Environment Menu and the CDHDR/CDPOS gives only provides information at the item level. The schedule line changes like change
-
Why i have to delete the Current word Text if i type wrong Previousword text in the sentence, my fingers are broad cannot accurately point thespecific character, I am forced to delete current word text, its really makingmy mind to get rid of iPhone4
-
My iomega drive will not open on my new mac mini
my iomega drive will not open on my new mac mini. I was using it on my old mac mini with no problems. Help
-
Book hours on activities/projects that have status TECO.
Dear PS gurus, Can we book hours in CAT2, on activities that have status teco, actually here we are using ZHR_timesheet for booking actual hrs instead of using CAT2, but now our requirement is that in status TECO, the system should not allow the user