Underscores appearing when the Source is OBIEE Answers report.

Hi,
When I use OBIEE Answers for my Source in the XML data I see the table name.columns in the below format with a Underscore at the beginning and end.
Is there any way that we can give proper names to it as becasue when I am using this in Analyzer Template there is no way I can rename the columns.
<_Responsibility_._Booking_Channel_>ATO/Call Centre</_Responsibility_._Booking_Channel_>
<_Origin_City_._Origin_Country_Name_>Jordan</_Origin_City_._Origin_Country_Name_>
<_Origin_City_._Origin_City_Name_>AMMAN</_Origin_City_._Origin_City_Name_>
<_Destination_City_._Destination_Country_Name_>Egypt</_Destination_City_._Destination_Country_Name_>
<_Destination_City_._Destination_City_Name_>CAIRO</_Destination_City_._Destination_City_Name_>
<_Flight_Segment_._No_of_Customer_Journeys_>5</_Flight_Segment_._No_of_Customer_Journeys_>
<_Flight_Segment_._No_of_Flight_Segments_>5</_Flight_Segment_._No_of_Flight_Segments_>
Regards,
Bhavik

Hey Bhavik,
I'm having a similar problem with the formatting of the columns taken from OBIEE Answers. I'm trying to do the following, but its not liking the period in the middle of a variable name.
<xsl:variable name="totalOH" select="sum(current-group()/_EQUIPMENT_._OH_)"/>
I'll let you know if I find anything.
-Luke

Similar Messages

  • How to restore iPod when it doesn't appear in the Source List?

    About 6 months ago I stupidly wiped my iPod Nano (5th Gen) and reformatted it as fat32. I assumed that when I formatted it back to Mac OS Journaled it would work normally as an iPod again but it doesn't. When it is plugged into my Mac running 10.5.8, it appears on the desktop/mac harddrive (without its individualised nano icon) and it fails to appear in the source list in iTunes (10.2.2).
    I have tried everything I know how to do, including the steps outlined in this support document:
    http://support.apple.com/kb/TS1410
    I need to restore the iPod to factory settings, but need a way to do this not through iTunes seeing as the iPod is not recognised. Specifically, in the following support document I cannot complete step 4:
    http://support.apple.com/kb/HT1339
    One last thing I have tried is duplicating the files (including hidden ones) from a 5th gen nano that does appear in my source list, and placing those files into my apparently invisible nano but this has not made any difference.
    Does anyone have any suggestions? I have basically been left with a bricked paperweight (due mostly to my own stupidity!) but would love to be able to use it again.
    Thanks for any help offered

    Hello kismet_kracker,
    What happens if you place the iPod into Disk Mode with it still connected to your Mac?  Does it then show up in Finder as a mounted drive?  Here are instructions for putting your iPod into Disk Mode.
    http://support.apple.com/kb/ht1363
    B-rock

  • SELECT * cannot be used in an INSERT INTO query when the source or destination table contains a multivalued field

    Hi,
    I am using Access 2013 and I have the following VBA code, 
    strSQL = "INSERT INTO Master SELECT * from Master WHERE ID = 1"
     DoCmd.RunSQL (strSQL)
    when the SQL statement is run, I got this error.
    SELECT * cannot be used in an INSERT INTO query when the source or destination table contains a multivalued field
    Any suggestion on how to get around this?
    Please advice and your help would be greatly appreciated!

    Rather than modelling the many-to-many relationship type by means of a multi-valued field, do so by the conventional means of modelling the relationship type by a table which resolves it into two one-to-many relationship types.  You give no indication
    of what is being modelled here, so let's assume a generic model where there is a many-to-many relationship type between Masters and Slaves, for which you'd have the following tables:
    Masters
    ....MasterID  (PK)
    ....Master
    Slaves
    ....SlaveID  (PK)
    ....Slave
    and to model the relationship type:
    SlaveMastership
    ....SlaveID  (FK)
    ....MasterID  (FK)
    The primary key of the last is a composite one of the two foreign keys SlaveID and MasterID.
    You appear to be trying to insert duplicates of a subset of rows from the same table.  With the above structure, to do this you would firstly have to insert rows into the referenced table Masters for all columns bar the key, which, presuming this to be
    an autonumber column, would be assigned new values automatically.  To map these new rows to the same rows in Slaves as the original subset you would then need to insert rows into SlaveMastership with the same SlaveID values as those in Slaves referenced
    by those rows in Slavemastership which referenced the keys of the original subset of rows from Masters, and the MasterID values of the rows inserted in the first insert operation.  This would require joins to be made between the original and the new subsets
    of rows in two instances of Masters on other columns which constitute a candidate key of Masters, so that the rows from SlaveMastership can be identified.
    You'll find examples of these sort of insert operations in DecomposerDemo.zip in my public databases folder at:
    https://onedrive.live.com/?cid=44CC60D7FEA42912&id=44CC60D7FEA42912!169
    If you have difficulty opening the link copy its text (NB, not the link location) and paste it into your browser's address bar.
    In this little demo file non-normalized data from Excel is decomposed into a set of normalized tables.  Unlike your situation this does not involve duplication of rows into the same table, but the methodology for the insertion of rows into a table which
    models a many-to-many relationship type is broadly the same.
    The fact that you have this requirement to duplicate a subset of rows into the same table, however, does make me wonder about the validity of the underlying logical model.  I think it would help us if you could describe in detail just what in real world
    terms is being modelled by this table, and the purpose of the insert operation which you are attempting.
    Ken Sheridan, Stafford, England

  • The Shopping cart not appearing in the sourcing cockpit of the buyer

    Hi
    We are using Extended Classic Scenario. The SC was created in SRM and then after approval was send to a central buyer for sourcing. The central buyer redistributes the same to the respective Buyer based on the purchasing group. However the SC doesnt appear in the sourcing cockpit of the actual buyer and when I see the details of the SC item in BBP_PD, I see that the Sourcing Relevant Indicator is marked 'Y' which means Sourcing is already completed. But nowhere a supplier has been added to the SC by anyone and it also doesnt reflect in the BBP_PD.
    Any idea how and why the indicator has the status 'Y' and how can I make the SC appear in the sourcing cockpit of the buyer.

    Hi Manoj,
    If the SC is directly converted into a P.O (either ordered / held status) please check the Sourcing settings in SPRO.
    SPRO > IMG > SRM > SRM Server > Sourcing > Define sourcing for product categories
    Check whether sourcing always carried out was maintained for the required product category. The P.O will get directly created in case the setting is " Sourcing never carried out".
    Please check this and let me know if this is the case.
    Rgds,
    Teja

  • How to display a message in dashboard when the source is not available

    Hi,
    I had a requirement to display a custom message in the dashboard instead of showing the default error message like "Client commands are disabled by administrator" when the source is unavailble for the reports. I'm using Essbase as the source and when the cube is loaded, i have to dispaly the custom message and to hide all the reports in the dashboard, any suggestions are highly appreciated and will be highly helpful to me.
    Thanks
    Ashik

    Hi,if i understand your question....
    i believe you can manage it in 3 ways.
    1.you can make groups in order each one be able to "see" its own report..and so on...
    2.In the results section , there is a format other views-->No result, you can try it.
    3.There is a configuration in///....\OracleBI\web\msgdb\**your nls**\messages such as commmesages.xml and other , where you can handle your "error" report
    http://greekoraclebi.blogspot.com/
    ///////////////////////////////////////

  • Final total cannot appear when the last line item reached the page end

    Hi All,
    My report included 2 pages. Problem is the final total cannot appear when the last line item reached the page end. (page 2)
    final total will appear on the middle of last page (page 3) when i comment (type    = 'BOTTOM').
    Below is the program.
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          device   = 'PRINTER'
          dialog   = 'X'
          form     = 'ZBOTM_VOUCHER'
          language = sy-langu.
      sort itab by vblnr.
      LOOP AT itab INTO wa_itab.
        move wa_itab-vblnr to reguh-vblnr.
        move wa_itab-lifnr to reguh-lifnr.
        move wa_itab-rbetr to reguh-rbetr.
        reguh-rbetr = reguh-rbetr * -1.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            window  = 'MAIN'
            element = 'DETAIL'.
        t_rbetr = reguh-rbetr + t_rbetr.
        AT LAST.
          CALL FUNCTION 'WRITE_FORM'
            EXPORTING
              window = 'LINE'.
          CALL FUNCTION 'WRITE_FORM'
            EXPORTING
              element = 'TOTAL'.
              type    = 'BOTTOM'
              WINDOW  = 'MAIN'.
        ENDAT.
    Thanks.

    Hi,
    Where should I include the code for bottom?
    How to open text editor?
    Thanks.
    Edited by: Alice8 on Feb 7, 2011 9:09 AM

  • My camera does not appear in the source list on 9.2.3

    after updating my camera software, my camera no longer appears in the source list on iphoto '11.  I am running version 9.2.3 of iphoto on a MacBook (OS X 10.6.8).  I'm not sure how to revert to the previous verson befor the update.  Any ideas?

    Since you do not tell us any information about the actual problem except that it does not work a couple of things to try are generally the problem - make sure the camera is set to mass storage mode - that is what iPhoto expencts - and once you get your photos safely off the card (image capture maybe or if it moiunts to the desktop the finder) use the camera to reformat it
    LN

  • The balloon tips which appear when the cursor hovers over text has been disabled or is now a small box with no text

    There is a balloon tips dialogue box that appears when the cursor hovers over text or information box. For example, if you move your cursor over an empty box while filling out a form the little box appears next to the cursor and says "Enter name."
    The balloon is no long showing information or any text. The balloon pops up but is too small to have text in it. How do I turn this back on?

    Try disabling the Google Toolbar extension and see if that is the cause.

  • Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected.  At least that happens with my camera.  Good luck.

  • Default Absence/Attendance typeshould appear when the CAT2 screen is called

    Hi,
    I want Default Absence/Attendance typeshould appear when the CAT2 screen is called, we did all necessary settings
    in TCODE CAC1, assign default Attendance type but still it wont appear in CAT2 screen.
    With regards
    Vikrant

    Hi
    Thankls for reply
    is there any other way we call absence /Atten type default in CAT2 with out entering time .
    I want this on ESS, when employee forget ot mark his attendance,  system will consider default absent type unauthorisd and it will consider absent for that employee.
    Regards
    Vikrant
    Edited by: Vikrant Patil on Sep 10, 2010 10:39 AM

  • Problem in refreshing the data in OBIEE answers?

    Hi,
    My report doesn't show the latest data in the database. I tried restarting my BI server and Presentation server also. But it is still showing the old data only. But in Admin tool im able to view the latest data. What could be the reason for this? Wont the refresh button given at the bottom of the report refresh the data?
    Thanks,
    Karthick

    Hi,
    If you want to use the cache and you have a regular load of data into your source for OBIEE, then you just need to ensure that the cache is cleared after your load. There is an ODBC command which will clear it:
    Call SAPurgeAllCache();
    You can put this in a sql file and then call it from a .cmd file:
    nqcmd -d "AnalyticsWeb" -u Administrator -p <password> -s D:\OracleBI\server\Scripts\Common\purge_cache.sql -o D:\OracleBI\server\Scripts\Common\purge_cache.out
    When you run this .cmd file it will clear the cache, this could then be caled from another tool, i.e. an Informatica workflow. All above is based on using a windows machine to connect and run the command.
    If your data is changing all the time and you just don't want caching on then just turn it off in nqsconfig.ini, change:
    ENABLE     =     YES;
    To
    ENABLE     =     No;
    in the cache section.
    Regards,
    Matt

  • My ipod does not appear in the source pane

    I must have done a big mistake as I have got a windows computer at home but plugged my ipod on my mac computer at work. From that day my ipod got empty. I thought going home and plugging it bac in my laptop the problem would it be fixed, but hasn't worked. I have tried any step available from thesupport site. Install and unistall everything about 100 times. The message that keeps appearing when I plug my ipod nano on my computer is: "ITUNES NO PUEDE LEER EL CONTENIDO DEL "IPOD DE XXX". HAGA CLICK EN RESTAURAR PARA RESTAURAR LOS AJUSTES DE FÁBRICA DEL IPOD", which it means I should restore to the factory setting, but once I tried to do it, on one of the steps takes from granteed that my Ipod appears on the soure pane of ITUNES, which it does not ever happen. I have found my Ipod file on the windows system and followed all the steps on that issue, but there has not been any kind of result. I have tried the menu in my ipod to restore it from itself but does not work..well, I have tried anything available from the advices from apple(have spent more than 4 hours on it) but can't get my ITUNES to recognice anything. By the way, I have aslo uninstalled my IPOD and with the CDroom, tryied to installed the whole thing again,..but nothinggg. GOt I tunes version 7. Any advice will be very helpful as I cannot stand going to work on the bus for an hour without my music...and Cannot afford another IPOD at the mo..
    Thanks in advanced.

    I have a very similar problem but I have done the 5 Rs and more---multiple times--and my iPOD and iTunes are just stuck in an endless cycle of Restore and Restart but rather than showing up in the source panel so I can put my music back on, the icon appears and tells me to restore again. I did everything including checking my USB ports etc. in My Computer and my iPOD refuses to get out of this cycle when iTUNES does bother to recognize it. Any suggestions other than the 5 Rs---because they are doing absolutely nothing.

  • How do I relink my video files when the source files are located in an AVCHD folder structure?

    I am using FCP X 10.1.1 and I was completely done with editing a simple multicam video for a choir track and when I was exporting it it failed. I re-opened FCPX and found that there are several missing files, when I had just been working with them just a second ago! I know about relinking video files, but when I try to locate the source files (knowing where they are), the browser will not let me select ACHD file contents to get at the video files. Also, I cannot open the Library file for my project either.
    Here is a snap shot:

    If it comes down to it, use clip wrap to carve your .mov files out of the SD. I am confused tho - if you were originally able to import all you needed and still have the original media ? Why can't you do it again to add other clips? To "get in" to your Library, control click on it>show paskage... but do NOT MOVE anything only copy.
      Perhaps soeone else can shed light on this?

  • PDF forms have problems displaying text and only appears when the field is selected

    Hello,
    I created some pdf forms to distribute to the company clients. But we are having some people complaining about the text visibility. When they have work in team, the pdf that they receive from a third person often appears unfill or without text, the text is only visible when the field is selected. I need to find a solution for this because our company products are base on this forms.
    If there is any addition information that I should add to understand what is happening and how to fix it, I'll be happy to write it.
    In the company, we all have mac and the forms where created innitially in Adobe acrobat 9 pro, but we have now Adobe acropabt XI pro.
    The users have both Mac and Windows systems.
    Thank you,

    This is usually caused by the form being filled-in and saved by a Mac user who is using the Preview application to view the PDF. More information is here: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html
    It is a good idea to inform your users that Adobe Reader (or Acrobat) should be used to work with the forms.

  • SOURCE_REL_IND : shopping cart not appearing in the sourcing cockpit

    Gurus,
    Few of the shopping carts after deleting the follow-on PO doesn't appear back in the sourcing cockpit. Furthermore, I found the SOURCE_REL_IND set to blank in table BBP_PDIGP.
    Since this is happening at random, not sure if I can forcefully push the cart into the sourcing cockpit using any FM.
    Thank you.
    PS  : I tried FM : BBP_PDIGP_DB_DIRECT_UPDATE, but the next run of BBP_GET_STATUS_2 is revoking it back to space.

    Hello Ricardo
    SUB:- CLASSIC SOURCING ...
    assume that my buyer is incharge of the sc
    1.requestor creates a sc and buyer also create a PO from the cockpit.
    2. later business decides some thing  wrong so buyer deletes the same PO
    3. after status job the same sc why comes to cockpit. the same buyer should look each time the follow on docuemnts created or not?
    4. what is the SAP stratergy here deleted PO taking to cockpit again
    5. understand many customer has different taste.
    6. if i were buyer which i really deleted the same PO , i dont want to see the the same sc again into cockpit.
    sap has any flexible options ?
    7. any customers reported to sap this is a problem or incidence.
    i do have some incidents in sdn , 2 of them dont like this functionality
    BBP_GET_STATUS _2 - Deleted PO's
    deleted po not taken to the cockpit.
    what is the sap sourcing stratergy describes this scenario ?
    br
    muthu

Maybe you are looking for