Unexpected failure occured : com.wily.isengard.api.TransportConfiguration.

Dear All
When I execute Diagnostic System setup wizard, it comes out error message:
Unexpected failure occured : com.wily.isengard.api.TransportConfiguration.<init>(IZZ)V
and
The SMD upgrade failed, please use the SMD Admin application to get a complete status
Can anyone kindly give me some idea or advises? Thanks
[http://www.mountain.org.tw/sap/090329/B/00100.png|http://www.mountain.org.tw/sap/090329/B/00100.png]
[http://www.mountain.org.tw/sap/090329/C/00100.png|http://www.mountain.org.tw/sap/090329/C/00100.png]
Jimmy

Hi,
Yep I went thru that one. I redeployed introscope agent on solman to version 7.2 but upgrader on solman diagnostics still fails with the same exception:
Report Upgrade for Setup Data Upgrade
Status: Fail in 252ms.
Upgrade Result:
n.a
Exception Cause:
java.lang.NoSuchMethodError: com/wily/isengard/api/TransportConfiguration.<init>(IZZ)V
     at com.wily.introscope.jdbc.IntroscopeConnection.open(IntroscopeConnection.java:170)
     at com.wily.introscope.jdbc.IntroscopeConnection.<init>(IntroscopeConnection.java:53)
     at com.wily.introscope.jdbc.IntroscopeDriver.connect(IntroscopeDriver.java:90)
     at java.sql.DriverManager.getConnection(DriverManager.java:559)
     at java.sql.DriverManager.getConnection(DriverManager.java:189)
     at com.sap.sup.admin.wily.jdbc.EMInfo.newConnection(EMInfo.java:176)
     at com.sap.sup.admin.wily.jdbc.EMInfo.getConnection(EMInfo.java:127)
     at com.sap.sup.admin.wily.jdbc.EMInfo.test(EMInfo.java:313)
     at com.sap.sup.admin.wily.jdbc.EMOverview.populateEmInfo(EMOverview.java:380)
     at com.sap.sup.admin.wily.jdbc.EMOverview.updateEmConfig(EMOverview.java:371)
     at com.sap.sup.admin.setup.ManagingServices.storeEMInfo(ManagingServices.java:1255)
     at com.sap.sup.admin.setup.SetupUpgrader.execute(SetupUpgrader.java:42)
     at com.sap.smd.SMDUpgradeManager.executeUpgrade(SMDUpgradeManager.java:174)
     at com.sap.sup.admin.smd.upgrader.SMDUpgraderComponentView.doExecute(SMDUpgraderComponentView.java:555)
     at com.sap.sup.admin.smd.upgrader.wdp.InternalSMDUpgraderComponentView.wdInvokeEventHandler(InternalSMDUpgraderComponentView.java:250)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:345)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thanx
Michal J.

Similar Messages

  • Java.lang.NoSuchMethodError: com.wily.isengard.api.TransportConfiguration.

    Hello All,
    While running diagnostic setup, i get following error
    java.lang.NoSuchMethodError: com.wily.isengard.api.TransportConfiguration.<init>(IZZ)V
    I have installed introscope8.0.2.0, my solman is SP18 EhP1
    as per Note:1273028 - Introscope 8 Release Notes
    "Known problems in all Releases 8.x
    1. The bytecode instrumentation agent 8.0 cannot be used for Solution Manager self-monitoring. Please upgrade to Solution Manager SP19 to enable self-monitoring with a version 8 bytecode agent. Otherwise Setup for Introscope Agents fails with
    java.lang.NoSuchMethodError: com.wily.isengard.api.TransportConfiguration.<init>(IZZ)V ...
                  As an alternative you can use Java agent version 7.2 for self monitoring of the Solution Manager Java stack SP18. Since the setup procedure involves several steps this is not recommended.
    But as per Note: 1272620 - Wily Introscope Agent Setup Advanced features
    Point 1 and 3 are little bit confusing.
    Please suggest what am I suppose to do?
    Adding one more query.....
    Customer had already installed Solman, hence SMD is also installed.
    But normally when you install SMD agent at Managed system, you specify Solman server details and SMD_ADMIN user(this user is only generated after diagnostic setup).
    If I want to use Solman itself as managed system.  Do I need to uninstall and reinstall SMD seperately ?
    Please help me with these 2 queries
    Regards,
    Shyam.

    Hi
    How did you solve your error?
    Thanks
    regards
    Murat

  • Unexpected Failure in SOAP RPC client while consuming the resource

    We are web service provider, The consumer is outside our local network and the URL is https, ie SSL, since they getting the below error intermittently.I would really appreciate for valuable suggestions.
    time_stamp=Wed Oct 10 15:56:36:697 CDT 2012
    hostname=prodlgfrm203as1l
    jvm_name=product_svcs_01
    application_name=ent_yod_svc
    process_name=EntTransactions
    message_text=""
    stack_trace="WebServicesFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server
    faultString: Unexpected Failure
    faultActor: http://ssg:8443/service
    faultDetail:
    Unexpected Failure
    at com.ibm.ws.webservices.engine.WebServicesFault.makeUserFault(WebServicesFault.java:317)
    at
    com.ibm.ws.webservices.engine.xmlsoap.builders.WebServicesFaultProcessor.createFault(WebServicesFaultProcessor.java:415)
    at com.ibm.ws.webservices.engine.xmlsoap.SOAPFault.getFault(SOAPFault.java:863)
    at com.ibm.ws.webservices.engine.SOAPPart.getFault(SOAPPart.java:1157)
    at com.ibm.ws.webservices.engine.SOAPPart.getFault(SOAPPart.java:778)
    at com.ibm.ws.webservices.engine.Message.getFault(Message.java:1060)
    at com.ibm.ws.webservices.engine.Message.ifFaultThrowSelf(Message.java:1040)
    at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:191)
    at
    com.ibm.ws.webservices.engine.handlers.jaxrpc.JAXRPCHandler.invoke(JAXRPCHandler.java:153)
    at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:262)
    at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:262)
    at com.ibm.ws.webservices.engine.WebServicesEngine.invoke(WebServicesEngine.java:336)
    at com.ibm.ws.webservices.engine.client.Connection.invokeEngine(Connection.java:937)
    at com.ibm.ws.webservices.engine.client.Connection.invoke(Connection.java:731)
    at com.ibm.ws.webservices.engine.client.Connection.invoke(Connection.java:680)
    at com.ibm.ws.webservices.engine.client.Connection.invoke(Connection.java:502)
    at com.ibm.ws.webservices.engine.client.Stub$Invoke.invoke(Stub.java:1089)
    at
    com.usaa.ent.yod.categorizationService.svc.YodCategorizationServiceSOAPImpl.addTransactionSubCategory(YodCategorizationServiceSOAPImpl.java:139)
    at sun.reflect.GeneratedMethodAccessor1878.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
    at java.lang.reflect.Method.invoke(Method.java:611)
    at
    com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeMethod(JavaDispatcher.java:178)
    at
    com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeOperation(JavaDispatcher.java:141)
    at
    com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processRequestResponse(SoapRPCProcessor.java:481)
    at com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processMessage(SoapRPCProc

    We are web service provider, The consumer is outside our local network and the URL is https, ie SSL, since they getting the below error intermittently.I would really appreciate for valuable suggestions.
    time_stamp=Wed Oct 10 15:56:36:697 CDT 2012
    hostname=prodlgfrm203as1l
    jvm_name=product_svcs_01
    application_name=ent_yod_svc
    process_name=EntTransactions
    message_text=""
    stack_trace="WebServicesFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server
    faultString: Unexpected Failure
    faultActor: http://ssg:8443/service
    faultDetail:
    Unexpected Failure
    at com.ibm.ws.webservices.engine.WebServicesFault.makeUserFault(WebServicesFault.java:317)
    at
    com.ibm.ws.webservices.engine.xmlsoap.builders.WebServicesFaultProcessor.createFault(WebServicesFaultProcessor.java:415)
    at com.ibm.ws.webservices.engine.xmlsoap.SOAPFault.getFault(SOAPFault.java:863)
    at com.ibm.ws.webservices.engine.SOAPPart.getFault(SOAPPart.java:1157)
    at com.ibm.ws.webservices.engine.SOAPPart.getFault(SOAPPart.java:778)
    at com.ibm.ws.webservices.engine.Message.getFault(Message.java:1060)
    at com.ibm.ws.webservices.engine.Message.ifFaultThrowSelf(Message.java:1040)
    at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:191)
    at
    com.ibm.ws.webservices.engine.handlers.jaxrpc.JAXRPCHandler.invoke(JAXRPCHandler.java:153)
    at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:262)
    at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:262)
    at com.ibm.ws.webservices.engine.WebServicesEngine.invoke(WebServicesEngine.java:336)
    at com.ibm.ws.webservices.engine.client.Connection.invokeEngine(Connection.java:937)
    at com.ibm.ws.webservices.engine.client.Connection.invoke(Connection.java:731)
    at com.ibm.ws.webservices.engine.client.Connection.invoke(Connection.java:680)
    at com.ibm.ws.webservices.engine.client.Connection.invoke(Connection.java:502)
    at com.ibm.ws.webservices.engine.client.Stub$Invoke.invoke(Stub.java:1089)
    at
    com.usaa.ent.yod.categorizationService.svc.YodCategorizationServiceSOAPImpl.addTransactionSubCategory(YodCategorizationServiceSOAPImpl.java:139)
    at sun.reflect.GeneratedMethodAccessor1878.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
    at java.lang.reflect.Method.invoke(Method.java:611)
    at
    com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeMethod(JavaDispatcher.java:178)
    at
    com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeOperation(JavaDispatcher.java:141)
    at
    com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processRequestResponse(SoapRPCProcessor.java:481)
    at com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processMessage(SoapRPCProc

  • Hyperion financial reporting studio hit an unexpected error occurred

    Hi everyone,
    i do not know whether this is the right place to post this query but gave a try.
    Here is my problem:
    This is newly setup client PC with financial reporting. When trying to login to the FR, it prompted "*An Unexpected Error Occurred*".
    Log showed the following error:-
    11-08 08:52:28 ERROR HRFoundationClient     cannot establish binding
    com.hyperion.reporting.util.HyperionReportException: cannot establish binding
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.rejoinFoundationSession(Unknown Source)
         at com.hyperion.reporting.hrfoundation.ReportStoreManagerImpl.createFoundationSession(Unknown Source)
         at com.hyperion.reporting.client.ReportClient.<init>(Unknown Source)
         at com.hyperion.reporting.client.DesignerManager.getRemoteConnection(Unknown Source)
         at com.hyperion.reporting.javacom.DesignerManagerComImpl.getRemoteConnection(Unknown Source)
    11-08 08:52:29 ERROR HRFoundationClient     
    java.lang.NullPointerException
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.getTRCPService(Unknown Source)
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.getRoot(Unknown Source)
         at com.hyperion.reporting.hrfoundation.ReportStoreManagerImpl.getRoot(Unknown Source)
         at com.hyperion.reporting.javacom.ReportStoreManagerComImpl.getRoot(Unknown Source)
    11-08 08:52:29 ERROR HRFoundationClient     An unexpected error occurred.
    com.hyperion.reporting.util.HyperionReportException: An unexpected error occurred.
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.getTRCPService(Unknown Source)
         at com.hyperion.reporting.hrfoundation.HRFoundationClient.getRoot(Unknown Source)
         at com.hyperion.reporting.hrfoundation.ReportStoreManagerImpl.getRoot(Unknown Source)
         at com.hyperion.reporting.javacom.ReportStoreManagerComImpl.getRoot(Unknown Source)
    11-08 08:52:29 ERROR HRFoundationClient     
    Kindly let me know if there is any solution for this.
    Thanks alot.

    If this is a client specific issue only with FR Studio continuing to log you in successfully on the server(if it happens to be Windows) or if other client PC also allow a successful login,then you can try a couple of things.
    1.Telnet the following ports from the client to the server and ensure connectivity--6800 to 6805,8200,8299,these are default ports,if you are using customized ports then ping the appropriate port numbers
    2.If telnet to all of these ports is successful,then copy the HReports.jar file from the server from under the products/biplus/lib directory and replace the same file on the client machine,the location is going to be the same,ensure you back up the HReports.jar file on your machine before replacing it if case you need to revert back
    Let me know

  • SRT: Unexpected failure in SOAP processing occurred - HTTP server instance

    I am trying to invoke an ABAP server proxy.  I can see the call route through XI.  But then when it tries to invoke the ABAP server proxy, i get the following error - SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance").  It looks like this might be a configuration issue on the SAP ECC side but I am not sure what needs to be corrected.  Here is the error is XI.
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>500</SAP:P1>
      <SAP:P2>SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance")</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>HTTP response contains status code 500 with the description SRT: Unexpected failure in SOAP processing occurred: (&quot;No configuration for this HTTP server instance&quot;) Error when sending by HTTP (error code: 500, error text: SRT: Unexpected failure in SOAP processing occurred: (&quot;No configuration for this HTTP server instance&quot;))</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Your help is appreciated.  I saw another posting about the same error but it was not answered:
    Re: SOAP:1.026 SRT: "no configuration for this HTTP server instance"
    Thanks,
    Jay

    hi Jay,
    i face the same problem for the web service and after reading your thread i've check that the ECC XI web service is already active in SICF
    is it possible the user id used for testing dont have authorization for testing or accessing the web service ?
    if it is possible, do you know what kind authorization that i need to add to the user id ?
    please advice and many thanks in advance

  • Error with web service SRT: Unexpected failure in SOAP processing occurred:

    Hello,
      I get the following error with a web service
    "SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance")"
    Any ideas on how to solve this ?
    Thanks.
    Regards, Michel

    Hi,
    I think the WSDL file shared with you and the soap message you are getting are a mismatch.
    Try to check the soap message xml format and see if matches the ouputs tags structure in WSDL file.
    Thanks & Rgds,
    Aditya

  • HT201366 Security Update 2013-003 keeps failing to install - 'Unexpected Error occurred' - and now my MacBook Pro is running extremely slowly?

    I have repeatedly tried to update the software 'Security Update 2013-003' on my MacBook Pro OS X Version 10.7.5 but it keeps failing to install, stating that 'an Unexpected Error Occurred'.
    Since the update failed the first time, my MacBook Pro has been running extremely slowly and failing to open basic apps like Mail and Safari at times.
    All other updates have been successful apart from this one. I have made sure that my MacBook isn't full (emptied Trash etc) but it still runs really slowly at times so I think it's linked with the Security Update failure.
    Please help!
    *I have tried installing the update from Support Downloads but it says there isn't space on Macintosh to install it. There is 190 GB of free space on that disk so I don't understand that at all.
    LION system.

    I have tried and it downloads successfully but when I install it, it comes up with this:

  • Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

    Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
    I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
    I tried those solutions for my trash and that helped after some trying.
    However, I still have the problem with copying and moving files.
    I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
    Who can help me??
    Cannot seem to find any info on it on the support-forums or elsewhere.
    My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
    Any help would be greatly appreciated...
    Otto

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • I tried to empty the trash, full of back up file from my hard disk and it just says: "The operation can't be completed because an unexpected error occurred (error code -8003)"

    I have an external hard disk of 319.73 GB that I use as back up memory and where I put all the movies and other files that I can't leave on the computer as they occupy too much memory space . One day I was deleting all the previous dated back up to have more space on it , but had to stop the trash for doing it cause it was taking too long and now every time that I try to empty the trash it just says "The operation can’t be completed because an unexpected error occurred (error code -8003)" and even if I press CONTINUE it won't empting it . I'm not really pratical with this things and I tried already to find out the solution here and on Google but apparently nobody ever had a similar error code and I don't know what else to do.
    I've a MacBook Pro with a Mac OS X 10.6.8 Version.
    Thanks again for the help and sorry if I did some english mistakes !
    PEACE & LOVE

    Hey donnie90,
    It seems like this article might be the best for helping you address this issue:
    You can't empty the Trash or move a file to the Trash
    http://support.apple.com/kb/ht1526
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Error in Remote Web Access - "An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server."

    I have set up the RWA and I can log in to the web console with my server account. However when I click on any of the shared folders I get this error:
    An unexpected error occurred.  Please try again.  If the problem continues, contact the person who manages your server.
    Does anyone know how to troubleshoot this?
    Regards,
    Maciek

    I had this very same issue with one of our customer's servers that was running Windows Server Essentials. I ended up calling Microsoft about the issue. I hope this helps someone. This originally appeared on my blog: http://techspeeder.com/2014/01/14/remote-web-access-error-an-unexpected-error-occurred/
    Troubleshooting Steps:
    1.  We were getting unexpected errors while accessing shared folders remotely
    2.  The tech found IIS handlers were missing
    3.  She went to IIS > server level ( parent level) and added managed handler mapping  :
    Name: svc-Integrated-4.0
    Request path: *.svc
    Executable: System.ServiceModel.Activation.ServiceHttpHandlerFactory, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    4. Added script mapping:
    Name: svc-ISAPI-4.0_64bit
    Request path: *.svc
    Executable: windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll
    Name: svc-ISAPI-4.0_32bit
    Request path: *.svc
    Executable: windir%\Microsoft.NET\Framework32\v4.0.30319\aspnet_isapi.dll
    5. Ran IISreset.
    6. We were able to access resources in Remote access, then.

  • After Effects can't continue: unexpected failure during application startup

    Im running 10.10, Mac OSX, it was running fine before a minor update came out, and now I can not open AE CS6. I have uninstalled, reinstalled it, installed the trial of CC 2014. No messages beside "After Effects can’t continue: unexpected failure during application startup" come up.
    System log:
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
                Call location:
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 0   CarbonCore                          0x00007fff82bb637d ___Gestalt_SystemVersion_block_invoke + 113
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 1   libdispatch.dylib                   0x00007fff8bf70fa2 _dispatch_client_callout + 8
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 2   libdispatch.dylib                   0x00007fff8bf70f00 dispatch_once_f + 79
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 3   CarbonCore                          0x00007fff82b5e932 _Gestalt_SystemVersion + 987
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 4   CarbonCore                          0x00007fff82b5e51f Gestalt + 144
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 5   AdobeCrashDaemon                    0x0000000100002e69 -[MyDaemon GetOSVersionMajor] + 33
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 6   AdobeCrashDaemon                    0x0000000100002d4a -[MyDaemon isRunningOnLeopard] + 25

    Well, looks like a bug in Yosemite. You might wanan read the pertinent announcements, anyway. At this point Adobe apps are not compatible with OSX 10.10.
    Mylenium

  • An internal error occurred while calling 'submitReport' API. (Error: ERR_WI

    An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270)
    We get above mentioned error message at any point in WebI Rich Client.
    DataSource: Teradata 12.0 (Local machine)
    BO XI 3.1 Client installed on local machine
    Universe (Secured connection)
    WebI : desiging and creating in Standlone mode
    WebI client version : 12.1.0.882
    Many times above written error is thrown 2-3 times even when we click on OK button and lastly followed by new error message:-
    Unable to get the first page of the current report - Web Intelligence will switch to structure view (WIJ 20003).
    Flow: We create report based on locally saved universe. There are couple of scenarios for which error comes
    1) After successfully saving the report, reopen and refresh causes this error (1st error and 2nd)
    2) Droping a properly written variable on measure column, if done Ctrl + Z, report works sometimes (both or 2nd error message)
    3) Draging out the mesaure or dimension from report (only 2nd error)
    Report is simple and no other stuff except the cross tab table
    Even if we start with simply dropping the dimension and measures on report, 2nd error comes at any time.
    What we noticed is that if we do all desiging in structure mode and then run instead of in result mode, reports works for more time.

    You can have a look here:
    Input Controls with Break Error on webi report
    http://www.forumtopics.com/busobj/viewtopic.php?t=60789&postdays=0&postorder=asc&start=45
    Re: internal error occurred while calling the 'submitReport' API.
    I'm Back
    HAPPY NEW YEAR

  • Error: Your request could not be completed because a failure occurred while the report was being processed.

    Post Author: sagimann
    CA Forum: Deployment
    Hello,
    I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
    My env is:
    Solaris 10 64 bit
    Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
    BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
    Important bouser env:
    ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
    TNS_ADMIN=$ORACLE_HOME/network/admin
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
    I reboot the box, then start BO like so:
    cd /opt/reporting/bobje
    . setup/env.sh
    ./mysqlstartup.sh
    ./startservers
    ./tomcatstartup
    Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
    Error:
    Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
    This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
    May  5 15:23:23 testbox1 boe_pagesd&#91;3865&#93;: &#91;ID 253862 user.error&#93; A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
    pls advise,
    thank you.

    The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
    The explanation, from a comment in the above linked blog post:
    "To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
    Edited by: abirdman on Feb 3, 2012 9:49 PM

  • INS-08109 Unexpected error occurred while validating inputs at state nodeselection page

    Scenerio: We have 4 node 11gr2 RAC cluster and Trying to install RAC Database software only on two nodes
    Getting warning on run Installer Page INS-08109 Unexpected error occurred while validating inputs at state nodeselection page while selecting two nodes out of four and even after confirming it comes back to same screen ....
    Example ... RAC node A,B,C,D  and clusterware is up and running on all four nodes .....
    Trying to Install RAC database on node C,D ... Getting INS-08109 Unexpected error occurred  while selecting C,D  Node out of Four nodes ...A,B,C,D

    Very stupid installer !
    I've omitted my email, then pressed no in the next message, it passed that step!

  • When I try to move files from my mac (v10.8.5) to my external harddrive I get the error message The operation can't be completed because an unexpected error occurred (error code -50).

    When I try to move files from my imac (v10.8.5) to my external harddrive I get the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." How can I resolve this? Thank you.

    Some other things to look at.
    https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50

Maybe you are looking for