Unexpected skipLinkTarget component behavior

Hello,
I am working on a web application created with JDeveloper 11.1.1.6 and ADF that needs to meet accessibility requirements such as Section 508. I have noticed a strange behavior of the af:skipLinkTarget component - Rather than jumping to the start of the content area (defined by the content facet), it jumps to the first button or link in the content area.
This is very problematic for our visually impaired users who must rely on screen reader software to use the application. As a workaround, we have told them to ignore the "Skip to content" link and use the H key to jump to the h1, which marks the start of the content area.
We would like to find a good solution rather than relying on this workaround so that our site is compliant with today's accessibility standards and our visually impaired users have the same experience as sighted users.
Like our users, I would expect a "Skip to content" link to actually skip to the content. After all, the link does not say "Skip to the first button in the content"
Thank you for reading and any assistance is greatly appreciated!
JW

Hi,
my best suggestion for you is to contact customer support and open a service request if you have a customer support contract. Not many in this forum have a screen reader setup to reproduce the issue, which I think would be required to help you out
Frank

Similar Messages

ARB Issue: Pattern for Exposing Component Behaviors

Posted today:
http://opensource.adobe.com/wiki/display/flexsdk/Pattern+for+Exposing+Component+Behaviors
Please post comments by Wednesday COB. Thanks!

The best forum for general question like this are the JDeveloper ADF forum here:
JDeveloper and ADF
When posting there, could you clarify what you mean by "be rendered aside"

PanelGrid component behavior - initialization

I have a behavior that I do not understand.
I have a page that has several components including a 'gridPanel' and a 'pageFragment' with a javascript date slection menu. On the page fragment, I have an 'OK' button that initiates a display sequence within the 'gridPanel'. The display sequence is in a separate session bean and consists of creating a set of components within the 'gridPanel'.
Here is what I can do.
1) Navigate to the page.
2) Push the 'OK' button.
3) The 'OK' button returns null and the page passes through the prerender code for a second time and calls the display code in the session bean.
4) The display is drawn as expected.
Here is what I want to do, but cannot.
1) Navigate to the page.
2) In the 'prerender()' method, do something that will call the display sequence in the session bean. without having to push the OK button.
Basically, I want the display to come up when the page is navigated to, without having to push another button to generatre another redisplay.
When I attempt to call the display sequence in the session bean directly, the components that are used are null.
Here is the layout for the 'gridPanel' in the page
<h:panelGrid binding="#{OverviewPage.tsOverviewPanel}" id="tsOverviewPanel">
     <ui:panelLayout binding="#{OverviewPage.titlePanel1}" id="titlePanel1">
          <h:panelGrid binding="#{OverviewBean.titleGrid}" >
     </ui:panelLayout>
     <ui:panelLayout binding="#{OverviewPage.summaryPanel1}" id="summaryPanel1" >
          <h:panelGrid binding="#{OverviewBean.summaryGrid}" id="summaryGrid"/>
          <h:panelGrid binding="#{OverviewBean.errorGrid}" id="errorGrid"/>
     </ui:panelLayout>
</h:panelGrid>
The main panelGrid component 'tsOverviewPanel' belongs to the page 'OverviewPage'. It contains two additional panels that belong to the page "OverviewPage". These panels contain one or two panelGrid components that belong to the session bean 'OverviewBean'.
When I attempt to draw directly from the prerender() method of the page 'OverviewPage" the components that belong to the session bean 'OverviewBean" are null, however, the session bean is not. Once I push the 'OK" button it apparently submits the page to be redrawn in the JSF context and the components get initialized
What I suspect is happening is that I am getting messed up with the display phases of JSF.
When I attempt to draw directly from the prerender() method, the components belonging to the session bean 'OverviewBean" have not been instantiated, even though the 'init()' method of the session bean is being called, based on my logging.
Does anyone know how I can get the necessary components to initiate in this phase?
I do not have the option of moving everything into the page itself.
Thanks.

Well, I discovered how to resolve this.
The component that you bind to can not be recreated in the backing bean. Only the components within the bound component can be recreated. So what i did was added a panelGroup and binded that to my backing bean and then was able to recreate the panelGrid that was a child of the panelGroup.

Unexpected event structure behavior

Attached is a snippet (2009) that is not behaving as I expect. You can try to type in an entry in the control that isn't in the pull-down, then click out. There will be no visible entry in the control, but the event structure runs anyway. Is this expected? I had to add code to a VI to account for the event case running even though there was no entry in the control.
Solved!
Go to Solution.
Attachments:
unexpected behavior.png ‏30 KB

Apologies in advance, I do not have LV here to test, but based on reading the replies I feel like something is missing here.
With the Combo Box, clicking outside the control is like hitting enter, the check mark button, etc. It will fire the Value Change Event even if the value is the same. This is true for all controls. It is more of a Value Entered event. Pressing Escape is the proper method to cancel the entry.
If you enter an invalid string by clicking as described, the value will be empty and the Value Change event should fire. This should be reflected in NewVal="". OldVal *should* be correct, is it not? Doing it twice should give you OldVal=NewVal="", but not the first time. I am almost certain I would have seen this bug if it actually exists.
In short, I expect that entering an invalid string will fire the Value Changed event. I do not expect OldVal to equal NewVal unless an invalid entry (or the same valid entry) was entered twice. Does it really on the first try with an invalid entry (valid followed by invalid)? I say check for NewVal="" and if so either complain to the user or write OldVal to the ComboBox Value property or local variable.

Unexpected Alpha channel behavior in Premiere

Is there no way to interpret alphas as straight versus premultiplied in Premiere? Why do my transparent layers and clips with alpha channels display differently with a Black Video layer below them?
Background info:
I'm exporting my film to files with codecs that support alpha channels, not because I want an alpha in the result but because I need full RGB / 444 color coding for digital cinema theaters. I'm using ProRes444, Targa and PNG Image sequences to preserve as much quality as possible in my master exports.
I've discovered that there is no option to disable the alpha transparency in the Export Media step while preserving at least 10 bits per color channel (Trillions of colors in AE).
To solve this problem, I've had to add a "Black Video" clip to the first video track, underneath the film's content. When this is done, the pre-rendered text elements with alphas look different. They are movie trailer style text treatments that are light text over pure black. (I'm on my ipad right now and don't see a way to upload screen shots to show examples)
The result with the black video layer applied at the bottom is similar to the way QuickTime 7 displays straight alphas incorrectly. This problem occurs with both straight and premultiplied renders. The rendered text is from after effects and is stored using the animation codec.
I'm aware of how to work around this, by maintaining the alpha transparency in Premiere and then removing the alpha channel of my export by running it through After Effects, but that is a ridiculous, time consuming step.
I'm working with the GPU Mercury Engine on with a K5000 from NVIDIA. Can anyone explain this behavior? Is there no way to interpret alphas as straight versus premultiplied in Premiere? Why do my transparent layers display differently with a Black Video layer below them?
Here are the screen shots
UNDESIRED EFFECT using Black Video layer at bottom: Notice the fuzzy glow surrounding the text. This is happening with both straight and premultiplied renders.
INTENDED LOOK when composited over nothing: The glowing edges are displayed the same way in Premiere as in After Effects.

In my understanding, the reason 444 is indicated is because they are not RGB codecs. They simply sample the same amount of color as is possible in true RGB codecs. They still require a conversion from RGB to YUV for coding to a file, which almost always introduces a very slight shift in values, though usually imperceptible or acceptable. If the codec is truly RGB there is no need to indicate luminance vs color sampling.
...I think.
Again thank you for your awesome input! You've been a huge help here on my day off. :)

Bizzare component behavior

Hello,
I have created a custom component called a ChartCell based
off a tilelist. I have a SuperPanel (from
http://www.wietseveenstra.nl)
with a viewstack and a tabbar, with 4 types of ChartCells inside
(see code below).
I retrieve data from an external xml file and sort the data
based on types (in this case, glyph_form_type_id) into each
ChartCell using the populatePanels function.
the problem: if I only supply the first ChartCell with data,
(therefore, commenting out the other addItem methods in
populatePanels as illustrated below) everything works as expected.
But if i uncomment any other addItem (eg:
graphemes.dataProvider.addItem(i);) then a "cannot access a null
reference" error is thrown in the debugger. What completely baffles
me is, in the debugger->variables tab, the first chartCell
(phonemes) has a value of ChartCell, but the others (graphemes,
allophones, and sources) have a value of null! How can this be
possible? I've been banging my head over this for hours, please
help! (and let me know if you need any other information) Thanks in
advance

"bmilesp" <[email protected]> wrote in
message
news:glrkcs$4ku$[email protected]..
> Hello,
>
> I have created a custom component called a ChartCell
based off a tilelist.
> I
> have a SuperPanel (from
http://www.wietseveenstra.nl)
with a viewstack and
> a
> tabbar, with 4 types of ChartCells inside (see code
below).
> I retrieve data from an external xml file and sort the
data based on types
> (in
> this case, glyph_form_type_id) into each ChartCell using
the
> populatePanels
> function.
>
> the problem: if only supply the first ChartCell with
data, (therefore,
> commenting out the other addItem methods in
populatePanels as illustrated
> below) everything works as expected. But if i uncomment
any other addItem
> (eg:
> graphemes.dataProvider.addItem(i);) then a "cannot
access a null
> reference"
> error is thrown in the debugger. What completely baffles
my is, in the
> debugger->variables tab, the first chartCell
(phonemes) has a value of
> ChartCell, but the others (graphemes, allophones, and
sources) have a
> value of
> null! How can this be possible? I've been banging my
head over this for
> hours,
> please help! (and let me know if you need any other
information) Thanks in
> advance
http://www.magnoliamultimedia.com/flex_examples/Amys_Flex_FAQ.pdf
Q5
You may also find this example useful for other things you're
doing:
http://flexdiary.blogspot.com/2008/09/groupingcollection-example-featuring.html

Unexpected Grid View behavior?

Hi All,
Here is a situation I came across, that was quite unexpected compared to the behaviour in iTunes 7.
Suppose I have a playlist with multiple artists/albums. I have this playlist in Grid View. I choose this playlist from the left side navigation tree and press the play button. This playlist is set to shuffle by songs. I expect it to play a song and jump to the next song. iTunes 8 would just keep playing the same songs in the first album listed in the Grid View and would not jump to any other.
http://img152.imageshack.us/img152/4726/itunes20080910191124oh2.jpg
In this screenshot above, it will keep the songs in "The Very Best Of". If I press Ctrl+L (show now playing) then it would show only the songs in this album. This quite explains why it doesn't play other songs.
To explain a bit more on what's happening:
If I go to List View the song now playing does not have the Now Playing icon:
http://img98.imageshack.us/img98/1113/itunes20080910191500vf3.jpg
Notice it is playing "Opa Opa" but in the List View, it doesn't show it.
This is because in Grid View if you play a song from the playlist, it has its own "virtual playlist"
http://img98.imageshack.us/img98/5269/itunes20080910191525wl1.png
Notice the now playing icon there.
Why is this the case?
I hope you guys understood what I was trying to explain.
Thanks in advance,
Mike

wow.
well i just found the solution to my problem. Well i found the cause, not a solution really. All this problem seems related to the fact that i had my albums sorted by Ratings. If i sort them back by artist, it's all good!!
This is really frustrating, come on, this isn't suppose to pass Q.A. tests.
Even more, if i sort them in descending order instead of ascending, it works, but i got my favorite albums on the bottom.. i guess it's a work around.
Now also.. why did they put ratings but no options to filter by ratings? and where are Smart Playlists? Go Itunes, be more Iphoto! :P
JF

Unexpected exit and behavior of guided access

Hello,
I'm using Guided Access on iPad mini (iOS 7.1.1) and it has strange behavior.
1) If the battery drains down to 0%, after recharging the iPad is out of Guided Access.
2) I had also the situation that, when in Guided Access, it never enter in sleep mode and the battery drains rapidly down.
That is not what is expected from Guided Access and it was not the case with iOS 6.
Does anybody knows how to solve that ?
Thanks in advance,
Jean

Hi Jean Richelle,
There is a setting in the Guided Access preferences that allow you to select whether or not the device is allowed to sleep while in Guided Access. You may want to double check that this is set to allow. This may also help you with the battery drain issue. The following article may be helpful:
Tap Settings > General > Accessibility > Guided Access to set up Guided Access. From there you can:
Turn Guided Access on or off
Set a passcode that controls the use of Guided Access and prevents someone from leaving an active session
Set whether the device can go to sleep during a session
iOS: About Guided Access
http://support.apple.com/kb/ht5509
Regards,
- Brenden

Unexpected Fortran compiler behavior on variable declarations.

There are several problems concerning Sun Fortran compiler for Linux, concerning variable declarations:
(1) A variable can be declared two or more times within the same
program scope. Surprisingly, the compiler accepts this, without any error or
warning message. This is clearly a bug.
(2) There is no warning message if a variable is used but never set, even if the -w4 flag is used. This is a serious bug.
(3) There is no warning message if a variable is declared but never
used.
To illustrate the bugs, compile the following simple program:
module fooModule
implicit none
public :: add
contains
function add(x,y)
real, intent(in) :: x,y
real :: unused ! This variable is never used and never set; no warning message.
real :: add
add=x+y
end function add
end module fooModule
program TryProg
use fooModule
implicit none
real :: x
integer :: i
integer :: i ! Duplicated declaration. The compiler accepts this!
i=3
print*,i
print*,add(x,2.0) ! Variable x is used but not set; no warning message.
end program TryProg
EXPECTED BEHAVIOR:
(1) Something like "ERROR: Duplicate declaration of 'i'" or "ERROR:
Symbol 'i' already has basic type of INTEGER."
(2) WARNING: Variable 'x' is used but not set.
(3) WARNING: Variable 'unused' is never used and never set.
ACTUAL BEHAVIOR:
No error or warning messages; expected one error and two warnings.
The bugs appear in all Fortran compilers for Linux, including latest release, SSX2.

There are several problems concerning Sun Fortran
compiler for Linux, concerning variable
declarations:
(1) A variable can be declared two or more times
within the same
program scope. Surprisingly, the compiler accepts
this, without any error or
warning message. This is clearly a bug.
The bugs appear in all Fortran compilers for Linux,
including latest release, SSX2.You have cited a number of constraint violations. The
Fortran standard states
A processor conforms to this standard if
(3) It contains the capability to detect and report the
use within a sumitted program unit of an
additional form or relationship that is not
permitted by the numbered syntax rules or
constraints, including the deleted features
described in Annex B;
In English, this statement means that a conforming
implementation must be able to detect and report
syntax errors and constraint violations. It does not
mean that it must detect and report them by default.
Sun f95, like most other Fortran compilers, does not
give errors or warnings for the use of common
extensions by default. The option -ansi enables
the compilation mode that reports such uses.
For example, when I compile the program
PROGRAM MAIN
REAL X
REAL X
END
with the option -ansi, I get
REAL X
^
"t.f", Line = 2, Column = 1: ANSI: Use of the tab character is an extension of the Fortran standard.
REAL X
^
"t.f", Line = 3, Column = 7: ANSI: "X" has been given the REAL attribute more than once. This is nonstandard.
f90comp: 4 SOURCE LINES
f90comp: 0 ERRORS, 0 WARNINGS, 0 OTHER MESSAGES, 2 ANSI
The caret lines up with the identifer X in the output. The column
number is given as column 7, because the letter X is the seventh
character in the line.

Unexpected Shift+parent Behavior - AE CC

Todd mentioned that shift+parent has some new functionality in the "What's New" post.
(http://blogs.adobe.com/aftereffects/2013/04/whats-new-changed-after-effects-next.html - See "changes to Shift+parenting behavior:")
However, I've noticed another change that is less than desirable. When shift+parenting, the child layer jumps to the comp center coordinates (eg. [960, 540]) instead of the anchor point coordinates of the parent as it would in CS6.
Is this intended and/or should I report a bug?

I think you are misinterpreting what it says in the explanation. Let's say your child layer is at 200, 200 and the parent layer is at 400, 400. If you hold down the shift key and select the parent layer the child layer will move to 400, 400 in the comp window. This happens whether or not the child layer was previously connected to the same or a different parent layer.
After holding down the shift key and selecting a parent the position of both layers should be the same. The position values may not be the same, but the actual position should be. In other words if you child layer and your parent layer were both 200 pixels square they should overlap perfectly when using the shift + select parent feature as long as the anchor points for both layers are the same are the same.

Unexpected NTFS permissions behavior

I am administering a home server running Windows 2008 R2 (accessed by several Windows 8.1 clients) and have run into an NTFS permissions issue I do not understand.
On this server there is a S drive that contains all the online storage for our network.
The structure of the S drive looks like this:
Files
Public
    VariousPublicFolders
Private
    Person1
      Person1sStuff
    Person2
      Person1sStuff
Temp
Before any security modifications were made, the root of the S drive had the following permissions:
SYSTEM : Full Control
Administrators : Full Control
Users : Read and Execute
Also, all the above folders on this drive are owned by the Administrators group.
Then I started changing permissions in order to satisfy my security requirements.
For example, I disinherited permissions on Temp and allowed "Everyone" Full Control there.
That works fine.
What doesn't work fine is the permissions I am trying to set on the personal folders under the Private tree.
I want to make sure no one else (other than administrators) has access to anyone's personal data (the data in the Person1, Person2, etc folders).
So I disinherted permissions on each of those folders and then explicity set the following:
SYSTEM : Full Control
Administrators : Full Control
PersonX : Full Control
This, I thought should work beautifully.
I thought it should give each person full control of what happens in their personal folder, and also allow administrators and the system to get in there.
But it is giving people in the Administrators group problems.
I have a user called Custodian which is part of the Administrators group, and I use this user to do administrative tasks.
As Custodian, when I try to access someone's personal folder in Explorer I am greeted with a message that says "You don't currently have permission to access this folder."
Whaaaaat?
I am offered "Click continue to permanently get access to this folder."
If I say YES then Custodian is explicitly added to the folder ACL, and I can proceed to access the files there.
But I don't want this.
Custodian is already an Administrator, and Administrators already have full control of the folder. Why should I even be prompted, and even worse, have my user unnecessarily added to the ACL?
This is bad bad bad.
I think what is going on is that UAC is coming into play. I read somewhere that Administrators normally do not use their administrative token until they hit something that requires it, then UAC kicks in and asks to elevate them. This would be
fine if it happened. I guess I wouldn't mind having to click OK to enter a folder that requires admin access. But this is not what is happening. I am just blanket denied until I explicitly add the Custodian account to the ACL.
Can someone explain why an admin user is denied access to a folder having full control given to admins? What is going on here?
Can someone suggest a way to rig permissions so that my admin user doesn't have to be added explicity?
I just want to be able to browse and alter the entire drive with ANY administrative user without being bothered to alter permissions. I don't even mind being prompted for elevation, although honestly I'd prefer not to have that happen either.

Thank you, Milos, for taking the time to look at this.
RE: Making the post shorter, I'm not sure I could. It's not an easy problem to state, and I tried to do so in as few words as possible, any less and I would be leaving out critical info.
Here are your questions, answered.
(2) Yes, I am using a workgroup.
(3) An example calcs output
S:\Files\Private\Scott DATABANK\Scott:(OI)(CI)F
BUILTIN\Administrators:(OI)(CI)F
NT AUTHORITY\SYSTEM:(OI)(CI)F
(4) The share permissions are full, yes, but this is immaterial. I suffer the problem accessing the files locally/directly on the server. I probably shouldn't have mentioned anything about the share. It's just that the problem came to light
while I WAS accessing the files through the share, but then I tried locally and still had the problem.
I am unsure of what you mean in (5) (6) (7). Could you elaborate?

Weird jsf component behavior after exporting pdf to outputStream ~~

Hi,
I have a page which has a selectOneMenu control (allows user to select a workshop name) and a commandLink (generates a corresponding workshop pdf and opens in a separate browser window). All command actions are working fine(including the pdf generation).
I used the following code to export pdf to the browser
                HttpServletResponse response =
                   (HttpServletResponse)FacesContext.getCurrentInstance().getExternalContext ().getResponse ();
             response.setContentType ("application/pdf");
             response.getOutputStream ().write (bytes);
             response.getOutputStream ().flush ();
             response.getOutputStream ().close ();
             FacesContext.getCurrentInstance().responseComplete ();However, after viewing and exporting the pdf successfully from the browser, when I choose a different value in the slectOneMenu control again, the page then displays
%PDF-1.4 %�� 4 0 obj <>stream x�]o�6��+��T~"��dm �$z1����ey�b�~(:�c3��K_RP�kr9I81�� I|��}��I��Cn� ?�;�G����Y"��*Q�{��?�2��o��vv7ehpvv7er��1Fe��U��A4)�.g]}W]��f��~�X��q`��u34�c�)�� H�"i2SP�T�_��(L|�1C�'O�27��X#��te�r~ ��1�H��U3)�7�T�
instead of the same page with a different value in the selectOneMenu control.
Any ideas or suggestions? Thanks in advanced!!
Moreover, while searching for a solution for the problem on google and developer forums, I found a posting suggesting adding
{code}
context.getApplication().getStateManager().saveSerializedView(context);
{code}
before
{code}
FacesContext.getCurrentInstance().responseComplete ();
{code}
however, the suggestion did not solve the problem.
Any ideas or suggestions would be greatly appreciated. Thanks!!

Hi all,
I was able to resolve this issue by forcing the page to refresh itself when the commandLink control was clicked. However, for IE users, there would be a dialog box asking the user to click on "Retry" in order to refresh the page.
Any ideas or suggestions on how to eliminate the dialog box in IE would be greatly appreciated. Thanks in advanced!!

Unexpected template/styles behavior

Hello,
I have searched everywhere in the archives for my problem,
but none of the keywords I am coming up with are finding me
anything. So here it goes.
I have a user that is using Dreamweaver CS3 and is having a
strange problem with templates and style definitions.
She has a template and the first few lines look like this:
quote:
<html>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">

<title>Student Investment Fund</title>

<style type="text/css">
/* Page */
html, body {margin: 0; padding: 0;}
body { margin: 0; padding: 0;}
When she creates a new page with this template, the first few
lines look like this:
quote:
<html>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">

<title>Student Investment Fund</title>
When she's working on individual page content and she formats
the text that she's putting in (say she wants to change a word to
be red), Dreamweaver inserts the extra style definitions between
the <html> tag and the  line.
quote:
<html>
<style type="text/css">

</style>

<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
THEN she decides something needs to change in the template so
she changes the template and when Dreamweaver applies the changes
to this particular file, it wipes out the extra style definitions
that were inserted (above example).
Does anyone have any insight as to what is happening here, or
how I can get around this?
We are planning to have the site completely rewritten
(because the first one wasn't written that well) but I do need a
short term solution until that happens.
P.S. Another thing that confuses me is that Dreamweaver
doesn't populate the 'Style' dropdown list in the Properties box
with styles that are defined in the non-editable template part of
the page (the global styles). In fact, it doesn't recognize them at
all. Unfortunately whoever made this template left style
definitions with their default names (style1, style2) and when new
styles are created for individual pages, it uses the same names and
she ends up with two 'style1' definitions...?

How many files do you have hanging off this template?
Clearly there is an error in the child page's HTML. The
embedded
stylesheet, being between <html> and <head> is
not only misplaced, but will
indeed be erased by DW each time you update the template.
Do these rules in that embedded stylesheet change from page
to page? Or
would they be better placed in an external stylesheet?
Anyhow, show me what happens to the head region for this page
when you apply
this template to it.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"biannucci" <[email protected]> wrote in
message
news:[email protected]...
> Here is the entire template....
>
quote:
<html>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> 
> <title>Student Investment Fund</title>
> 
> <style type="text/css">
> /* Page */
> html, body {margin: 0; padding: 0;}
> body { margin: 0; padding: 0;}
> div { margin: 0; padding: 0; }
> /* Upper Area */
> div.upper { background-color: #290770; text-align:
center; }
> .upper p { margin: .5em 0 0 0; }
> .upper br { margin: 5px 0 0 0; }
> table.upperTable { border: none; width: 99%; padding:
5px 0px 0px 5px; }
> upperTable.tr, upperTable.td { margin:0; padding: 0; }
> /* Nav Area */
> div.nav { background-color: #000000; color: #FFFFFF;
vertical-align:
> middle;
> text-align: left; padding: 8px; margin-bottom: 10px;}
> .nav a, .nav a:visited, .nav a:active { color: #FFFFFF;
text-decoration:
> none; }
> .nav p { margin: 0; padding: 0; }
> .style1 {
> color: #FFFFFF;
> font-size: small;
> }
> .style1 a {
> color: #FFFFFF;
> }
> .style2 {
> color: #FFFFFF;
> font-style: italic;
> font-size: small;
> }
> .style9 {font-size: xx-large; }
> .style20 {font-family: Verdana, Arial, Helvetica,
sans-serif; font-size:
> 10px;
> }
> </style>
> 
> </head>
> <body bgcolor="#FFFFFF">
> 
> <div class="upper">
> <table width="100%" class="upperTable">
> <tr>
> <td width="50%"><img border="0"
src="../images/schoollogo.gif"
> width="275"
> height="73"></td>
> <td width="50%" align="right"><p
class="style1"><a
> href="
http://www.business.utah.edu/index.php">DAVID
ECCLES SCHOOL OF
> BUSINESS
> </a></p>
> <p class="style2">Education with Impact
</p></td>
> </tr>
> </table>
> <br />
> </div>
> 
> 
> <div class="nav">
> <p><font face="Arial" size="2">
| <a
> href="../index.html">Home</a> | <a
href="../about/fundhome.html">
> About
> the Fund</a> | <a
href="../current/currenthome.html"> Current
> Performance</a>
> |<a href="../historical/Year by Year
Review/historicalhome.html">
> Historical
> Performance </a>| <a href="../logon.php">
Members Only</a>
> |</font></p>
> </div>
> 
> 
> 
> <p align="center"
class="style9"> </p>
> 
> 
> 
> <div class="footer">
> <div align="center">
> <center>
> <table width="100%" height="141" border="0"
cellpadding="3"
> cellspacing="0">
> <tr>
> <td width="25%"><font face="Arial"
size="2"> </font></td>
> <td width="48%"> </td>
> <td width="27%"> </td>
> </tr>
> <tr>
> <td width="25%" height="109"><p
align="right"></p></td>
>
> <td width="48%">
> <p align="center" class="style20"><a
> href="
http://www.business.utah.edu"
target="_blank">Eccles
> School</a> | <a href="
http://www.utah.edu"
> target="_blank">University
> of Utah</a></p>
> <p align="center"><span
class="style20"><a
>
href="mailto:[email protected]">[email protected]</a>
> | <a
> href="
http://www.utah.edu/disclaimer/">Disclaimer</a></span>
</p>
> <p align="center"><font face="Arial"
size="1">Last update
> July 17, 2007
> </font> </td>
> <td width="27%">
> <p align="right"><a href="
http://www.utah.edu"
target="_blank"><img
> border="0" src="../images/blockulogo.gif" width="126"
height="90"></a>
> </td>
> </tr>
> </table>
> </center>
> </div>
> <p align="right"> </p>
> <p align="right"> </p>
> </div>
> 
> </body>
> </html>
>
>
>
> Here is the code from <html> to </head> of
one of the files that uses the
> template:
>
quote:
<html>
> <style type="text/css">
> 
> </style>
> 
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> 
> <title>Student Investment Fund</title>
> 
> <style type="text/css">
> /* Page */
> html, body {margin: 0; padding: 0;}
> body { margin: 0; padding: 0;}
> div { margin: 0; padding: 0; }
> /* Upper Area */
> div.upper { background-color: #290770; text-align:
center; }
> .upper p { margin: .5em 0 0 0; }
> .upper br { margin: 5px 0 0 0; }
> table.upperTable { border: none; width: 99%; padding:
5px 0px 0px 5px; }
> upperTable.tr, upperTable.td { margin:0; padding: 0; }
> /* Nav Area */
> div.nav { background-color: #000000; color: #FFFFFF;
vertical-align:
> middle;
> text-align: left; padding: 8px; margin-bottom: 10px;}
> .nav a, .nav a:visited, .nav a:active { color: #FFFFFF;
text-decoration:
> none; }
> .nav p { margin: 0; padding: 0; }
> .style1 {
> color: #FFFFFF;
> font-size: small;
> }
> .style1 a {
> color: #FFFFFF;
> }
> .style2 {
> color: #FFFFFF;
> font-style: italic;
> font-size: small;
> }
> .style9 {font-size: xx-large; }
> .style20 {font-family: Verdana, Arial, Helvetica,
sans-serif; font-size:
> 10px;
> }
> </style>
> 
> </head>
>
>
>
> Disclaimer: I am fully aware that this is really bad
html coding....its
> the
> reason I'm having the entire site rewritten....
>

Deployment error using CMS (Component is not a SCA but a SDA)

I haven't seen this message before on the forum so I thought I'd see if anyone else has run into this. My landscape is as follows:
Runtime System: NW04 SP14
JDI System: NW04 SP19
SAP SCA plugins: NW04 SP14
Application: Standard web dynpro with 2 DC's (one for model and one for application)
Landscape: Dev (no runtime), Cons (no runtime), Test (runtime), Production (runtime)
I have migrated my local development of these DC's into the JDI following the standard help documentation for migrating web dynpros. Everything went smoothly (no errors during build in Dev and Cons, Assembly went fine).
I am at the point of attempting to import my new SCA into the Test runtime environment using standard CMS. I first imported the SAP_BUILDT, SAP_JEE, and SAP_TECHS into test. This imported fine and from my understanding nothing will deploy for these so all is good. When I import my SCA, the SDM-deploy step issues the following fatal error:
<b>Info:Starting Step SDM-deploy at 2007-04-06 11:44:20.0344 -7:00
Info:start deployment of archives to SDM:http://myserver:50018
Info:The following archives will be deployed (on http://myserver:50018)
Info:E:\usr\sap\JTrans\CMS\archives\pcbp.comVMRSJDV_VMRS_C~20070406171501.sca
Fatal:Unexpected exception 'Component [Name: vmrs , Vendor: pcbp.com] is not a SCA, but a SDA.' occurred. Stopping processing.
Fatal Exception:java.lang.IllegalArgumentException: Component [Name: vmrs , Vendor: pcbp.com] is not a SCA, but a SDA.:Component [Name: vmrs , Vendor: pcbp.com] is not a SCA, but a SDA.
java.lang.IllegalArgumentException: Component [Name: vmrs , Vendor: pcbp.com] is not a SCA, but a SDA.
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
.....</b>
Has anyone seen this message before or have any thoughts as to what may be the issue? I have searched the forums and OSS for the "Component is not a SCA but a SDA" message and have been unsucessful. I have validated that the archive is in fact packaged as an SCA file. I attempted to rename it from the file system to a .sda to see what would happen but that was not successful. One more bit of info that may be helpful is that there may have been a previous application deployed on the runtime environment with the same name. Prior to attempting to deploy the JDI version, I had removed the app (the non JDI one) from the server using the Deploy service of Visual Administrator so there shouldn't be a conflict there right?
Message was edited by:
        Eric Vota
I think I figured this out. When I remove the application via the Visual Admin deploy service it does not synchronize with the SDM. For that reason, the old application (which was a deployed SDA) was still in the SDM repository. I am in process of using the SDM deploy tool to remove the offending application. After that I will attempt to reimport the SCA via the CMS. Hopefully this works. I'll update the post with the result in case anyone else has this problem.

This was fixed by undeploying from the SDM instead of from Visual Admin. Good to go now

Flash 8 pro flv playback behaviors

Could someone show me where I can get the FLV playback
component behaviors
for flash 8 pro? I couldn't find them on the Adobe exchange.
Thanks
-mark

I got them, thanks.
> That came from here
>
http://www.adobe.com/devnet/flash/articles/flvplayback_behaviors.html

Unexpected skipLinkTarget component behavior

Similar Messages

Maybe you are looking for