Unexpected updating of records
Here is my simplified case:
I have a table with three fields: ID, F1 and F2 and create a Form on Table with Report. The report is on Page 1 and the form on Page 2. Assuming that I have three records. The unexpected behavior I experienced is as follows.
I open the first record by clicking the ID hyperlink, populate F1 and F2 with the values of ABC and 123 respectively, and save the record. And then I open the second record, populate F1 only with a value of EFG but without putting anything in F2, and save the record. What scares me to death is that the second record turns out to have F2 populated with a value of 123 too.
I wonder whether the problem I have experienced is because I failed to clear cache of Page 2 when starting to work on the second record. Also does it have anything to do with the different choices of Source Used, “Only when current value in session status is null” or “Always, replacing any existing value in session state”?
Your help will be deeply appreciated.
Edited by: Sun2 on Oct 28, 2009 5:43 PM
Dear Varad,
Thank you so much for your reply, which did answer my question. Yes, my Source Type is 'Database Column.'
Since there are only two options for Source Used, may I ask when “Only when current value in session status is null” should be chosen? Just as someone else mentioned, there is not much documentation about Source Used.
Thank you again.
Edited by: Sun2 on Oct 28, 2009 5:40 PM
Similar Messages
-
Error while updating a record in MS Access
Im new to coldfusion and am running into a problem while
trying to update a record in a MS Access table.
I have a MS Access table where the primary key is a
auto-number long integer field named jobid.
I have an edit form where info can be changed then saved. A
hidden form field named jobid holds the records primary key field
value for the record being edited. When submitted this is what
happens:
I use a basic SQL UPDATE statement but I get the error "Data
type mismatch in criteria expression"
Some code:
<cfset nJobId=Int(Val(FORM.jobid))>
*dont know if i need the above line but using #FORM.jobid#
in the WHERE clause below didnt work either
<cfquery datasource="lrs">
UPDATE jobs SET
status='#FORM.status#',
offer='#FORM.offer#',
postdate="#CreateODBCDate(FORM.postdate)#",
jobtype=#FORM.jobtype#,
jobtitle='#FORM.jobtitle#',
..etc...
WHERE jobid=#nJobId#
The WHERE clause is where the error occurs with "Data type
mismatch in criteria expression"
After a few times with that i changed the where clause to
simply "WHERE jobid=1" as this record id does exist, but it has the
same error.
I then tried changing the where clause to
WHERE jobid=<cfqueryparam cfsqltype="cf_sql_bigint"
value="#FORM.jobid#">
and there it "appears" to work, but the record is not
actually updated. No changes are made to the table though no error
is thrown.
Im missing something here... why wont the record update
?The data type mismatch isn't necessarily in your where
clause. I'm guessing that it's the quotes around the create
odbcdate function.
use of cfqueryparam will solve a lot of these problems for
you. -
Getting timeout error while updating a record from c#
Hi,
I have around 30k records in a tables. When I update that record inside the Transaction (Enterprise Data Library, c#) , it takes long time and throws timeout error.
But I am able to update the same record via Toad.
In the morning I tried same updating the record, it works without any change in the code or script.+
is it due table lock or db related issue? please adivse, how to resolve if occurs again.
anandCode:
private static void Save()
using (DBTransactionManager dbTransactionManager = new DBTransactionManager())
try
DataTableDAL.Instance.ExecuteDML("Update Voyage SET BallastBonus = 30000 WHERE ID = 'AE53B610BEA743EC8AFBAED0C8349BF8';");
//commit database
dbTransactionManager.Commit();
catch
dbTransactionManager.RollBack();
throw;
Table
Column Name ID Pk Null? Data Type Default Histogram Encryption Alg Salt
ID 1 1 N NVARCHAR2 (32) None
CALCNUMBER 2 N NUMBER (10) None
CURRENCYID 3 N NVARCHAR2 (32) Frequency
CALCTYPE 4 N NUMBER (5) Frequency
ESTIMATEDESCRIPTION 5 Y NVARCHAR2 (200) None
ESTIMATEGROUPDESCRIPTION 6 Y NVARCHAR2 (200) None
BALLASTBONUS 7 Y NUMBER (12,2) None
BALLASTBONUSCOMMPCT 8 Y NUMBER (6,3) None
ISESTIMATE 9 N NUMBER (1) None
ADDITIONALSTEAMVALUE 10 Y NUMBER (8,4) None
ISADDITIONALSTEAMPCT 11 Y NUMBER (1) None
ADDITIONALPORTVALUE 12 Y NUMBER (8,4) None
ISADDITIONALPORTPCT 13 Y NUMBER (1) None
CREATEDBY 14 N NVARCHAR2 (32) Frequency
CREATEDDATE 15 N DATE None
UPDATEDBY 16 Y NVARCHAR2 (32) None
UPDATEDDATE 17 Y DATE None
LUMPSUMCARGOCOST 18 Y NUMBER (1) None
BUNKERPRICEMETHOD 19 Y VARCHAR2 (30 Byte) None
INCCONTCALCRESULT 20 Y NUMBER (1) None
FINAL_EST 21 Y NUMBER None
SPOT_VOYAGE 22 Y NUMBER (1) None
ISRUNCOSTEDIT 23 Y NUMBER (1) None
Index
Table doesnt have any index, except primary key index.
Total Records
35,000
Hope this input might sufficient to help me. -
Hi all,
I am trying to update one of the attribute of BO record by calling update function of BO in an application service. But i am getting an error message " Entity is locked by user guest".
I have written following code.
// getting service instance
OrderStatusServiceLocal orderstatusBOinstance = getOrderStatusService();
//getting a specific record
OrderStatus orderrecord = orderstatusBOinstance.readByCustomKeys(orderid);
//changing one of attribute
orderrecord.setApprovalstatus(newstatus);
//updating the record
orderstatusBOinstance.update(orderrecord);
Can anybody guide me in removing this error.
thanks in advance
ReenaI have checked the code. There is no problem in the current portion of the code, you have provided (I was wrongly thinking it should be insert into....!! mistake)
I have tested with Oracle Database and classes12.zip in classpath. It ran smoothly. -
Can't update mysql records from a web page
Hi everybody,
I am beginning with Dreamweaver CS5.
I followed a video tutorial on how to visually design a data entry/update web page for a mysql database using server behaviors.
My problem is that I was able to insert records and see inserted records but when I try to update a record it doesn't work.
I don't get any error message, it just redirects me to the listing page as it's supposed to but doesn't take into account the changes I made.
Below are 2 printscreens along with the corresponding code.
Can someone help me please?
Records list web page :
Records list code :
<?php require_once('Connections/dw_nouvellenaissance.php'); ?>
<?php
// *** Display of registered users
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
mysql_select_db($database_dw_nouvellenaissance, $dw_nouvellenaissance);
$query_users_videostream = "SELECT * FROM videostream_users";
$users_videostream = mysql_query($query_users_videostream, $dw_nouvellenaissance) or die(mysql_error());
$row_users_videostream = mysql_fetch_assoc($users_videostream);
$totalRows_users_videostream = mysql_num_rows($users_videostream);mysql_select_db($database_dw_nouvellenaissance, $dw_nouvellenaissance);
$query_users_videostream = "SELECT * FROM videostream_users";
$users_videostream = mysql_query($query_users_videostream, $dw_nouvellenaissance) or die(mysql_error());
$row_users_videostream = mysql_fetch_assoc($users_videostream);
$totalRows_users_videostream = mysql_num_rows($users_videostream);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Videostream Users List</title>
</head>
<body>
<h3 align="center">Videostream Users List </h3>
<table align="center" width="75%" border="1" cellspacing="0" cellpadding="0">
<tr align="center" BGCOLOR="#99CCFF">
<th>Surname</th>
<th>Name</th>
<th>City</th>
<th>UserID</th>
<th>Password</th>
<th>Edit</th>
<th>Delete</th>
</tr>
<?php do { ?>
<tr align="center">
<td><?php echo $row_users_videostream['Nom'];?></td>
<td><?php echo $row_users_videostream['Prenom'];?></td>
<td><?php echo $row_users_videostream['Ville'];?></td>
<td><?php echo $row_users_videostream['user_name'];?></td>
<td><?php echo $row_users_videostream['user_password'];?></td>
<td><a href="modifyuser.php?User_id=<?php echo $row_users_videostream['User_id']; ?>"><img src="images/edit.png" alt="modifier" width="15" height="15" hspace="5" /></a>
<td><a href="deleteuser.php?User_id=<?php echo $row_users_videostream['User_id']; ?>"><img src="images/delete.png" alt="supprimer" width="15" height="15" hspace="5" /></a></td>
</tr>
<?php } while ($row_users_videostream = mysql_fetch_assoc($users_videostream)); ?>
</table>
<p> </p>
<p align="center"><a href="formlogoutadmin.php">Deconnexion</a></p>
</body>
</html>
</body>
</html>
<?php
mysql_free_result($users_videostream);
?>
Udate records web page:
Update records code:
<?php require_once('Connections/dw_nouvellenaissance.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
//*** Update User
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "usersform")) {
$updateSQL = sprintf("UPDATE videostream_users SET Nom=%s, Prenom=%s, Ville=%s, user_name=%s, user_password=%s WHERE User_id=%s",
GetSQLValueString($_POST['Nom'], "text"),
GetSQLValueString($_POST['Prenom'], "text"),
GetSQLValueString($_POST['Ville'], "text"),
GetSQLValueString($_POST['user_name'], "text"),
GetSQLValueString($_POST['user_password'], "text"),
GetSQLValueString($_POST['User_id'], "int"));
mysql_select_db($database_dw_nouvellenaissance, $dw_nouvellenaissance);
$Result1 = mysql_query($updateSQL, $dw_nouvellenaissance) or die(mysql_error());
$updateGoTo = "showusers.php";
if (isset($_SERVER['QUERY_STRING'])) {
$updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
$updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
$colname_users = "-1";
if (isset($_GET['User_id'])) {
$colname_users = $_GET['User_id'];
mysql_select_db($database_dw_nouvellenaissance, $dw_nouvellenaissance);
$query_users = sprintf("SELECT * FROM videostream_users WHERE User_id = %s", GetSQLValueString($colname_users, "int"));
$users = mysql_query($query_users, $dw_nouvellenaissance) or die(mysql_error());
$row_users = mysql_fetch_assoc($users);
$totalRows_users = mysql_num_rows($users);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=charset=iso-8859-15" />
<title>Modify User</title>
</head>
<body>
<h1>Welcome Daniel</h1>
<h3 align="left">Please modify user fields then click OK</h3>
<form action="<?php echo $editFormAction; ?>" method="POST" name="usersform" id="usersform">
<input name="User_id" type="hidden" value="" />
<table align="left" width="50%">
<tr align="left">
<th>Surname: </th><td><input name="Nom" type="text" id="Nom" value="<?php echo $row_users['Nom']; ?>" /></td>
</tr>
<tr align="left">
<th>Name :</th><td><input name="Prenom" type="text" id="Prenom" value="<?php echo $row_users['Prenom']; ?>" /></td>
</tr>
<tr align="left">
<th>City: </th><td><input name="Ville" type="text" id="Ville" value="<?php echo $row_users['Ville']; ?>" /></td>
</tr>
<tr align="left">
<th>User ID:</th><td><input name="user_name" type="text" id="user_name" value="<?php echo $row_users['user_name']; ?>" /></td>
</tr>
<tr align="left">
<th>Password:</th><td><input name="user_password" type="text" id="user_password" value="<?php echo $row_users['user_password']; ?>" /></td>
</tr>
<tr align="left">
<td> </td><td align="left"><input type="submit" name="valider" value="Update" /></td>
</tr>
</table>
<input type="hidden" name="MM_update" value="usersform" />
</form>
</body>
</html>
<?php
mysql_free_result($users);
?>Daniel Cronin,
This link has information on preparing movies for viewing online by an iPhone:
https://developer.apple.com/iphone/devcenter/designingcontent.html
Click on the drop down menu for "Ensure a Great Audio and Video Experience".
You may need to register for Apple Developer Connection in order to view that information.
Hope this helps,
Nathan C. -
How to update multiple records in a table created in view (web dynpro)
Here is my coding......
*coding to get the district value
DATA lo_nd_district TYPE REF TO if_wd_context_node.
DATA lo_el_district TYPE REF TO if_wd_context_element.
DATA ls_district TYPE wd_this->element_district.
DATA lv_district_txt LIKE ls_district-district_txt.
navigate from <CONTEXT> to <DISTRICT> via lead selection
lo_nd_district = wd_context->get_child_node( name = wd_this->wdctx_district ).
get element via lead selection
lo_el_district = lo_nd_district->get_element( ).
get single attribute
lo_el_district->get_attribute(
EXPORTING
name = `DISTRICT_TXT`
IMPORTING
value = lv_district_txt ).
*coding to diplay records when clicking a button(Submit)
DATA lo_nd_table TYPE REF TO if_wd_context_node.
DATA lo_el_table TYPE REF TO if_wd_context_element.
DATA ls_table TYPE wd_this->element_table.
DATA lv_district LIKE ls_table-district.
navigate from <CONTEXT> to <TABLE> via lead selection
lo_nd_table = wd_context->get_child_node( name = wd_this->wdctx_table ).
get element via lead selection
lo_el_table = lo_nd_table->get_element( ).
get single attribute
lo_el_table->set_attribute(
EXPORTING
name = `DISTRICT`
" IMPORTING
value = lv_district_txt ).
The above coding updates only one record to that
table created in view.
If i enter 2nd district value means then the first record
in the table is overwritten.
So my need is the record should not be overwritten.
it(2nd record ) should be displayed after the 1st record.
Any one can help me and send the coding plz....instead of using set attribute you should use bind table method to display/update the records in table view.
step1 ) collect all the data in a local table
step2 ) and the bind that lacal table with your node
search1 = wd_context->get_child_node( name = `TABLE1` ).
search1->bind_table( lt_detail)
here lt_detail is your local table and TABLE1 is node which is bound with table ui element. -
Subsequent update of record, long time to appear in Journalized View
Hi,
I'm running some integration tests that do an insert into a source table, commits the insert, updates that record, commits the update. The cscn numbers are widely spaced, for example, the insert is 69997742 and the update is 70000579. I have a scheduled scenario running every few minutes that as a first step, extends window and locks subscriber.
What I'm seeing is the Insert will get propagated to the target immediately, but then the cscn number doesn't change for a long time, and at some random time in the future it will be updated and the update record will make it throguh to the target. I'm seeing time differences of 7 - 11 minutes between the arrival of the insert to the target and the arrival of the update.
Does anyone know how to decrease this "latency", is there a way of speeding up the time it takes for the cscn number to increment?
I found the following two tuning commands and have tried them, but I'm still seeing a long period of time between the insert and update,
begin dbms_capture_adm.alter_capture(capture_name=>'CDC$C_SAMS_INTEG', checkpoint_retention_time => 7); end;
begin dbms_capture_adm.set_parameter('CDC$C_SAMS_INTEG', 'parallelism','4'); end;
Any ideas would be appreciated!
Cheers
DamianWe temporarily solved the problem by switching to synchronous CDC. When we ran a performance analyzer over the database while data capture was taking place we found logmnr was taking around 6 minutes to query the data dictionary which looked like this bug: https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458214.1 which is apparently fixed. So the either the bug isnt fixed or we haven't configured the database correctly. Anyone know a good tutorial for getting the right configuration for archive logging, number of redo logs and their size, and retention policies etc?
-
I have a base template (which has never been sysprep'd) from which I create linked clones. After the linked clone comes up, I run the following command:
c:\windows\system32\sysprep\sysprep.exe /generalize /oobe /reboot /unattend:c:\windows\panther\unattend.xml
This works fine for the first few linked clones, but after about 3-4 linked clones are running, I start to hit "A fatal error occurred while trying to sysprep the machine."
****c:\windows\panther\setuperr.log****
2013-03-29 16:40:07, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]
2013-03-29 16:40:07, Error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x80070020[gle=0x00000020]
****c:\windows\panther\unattend.xml****
<?xml version='1.0' encoding='utf-8'?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Password>
<Value>ca$hc0w</Value>
<PlainText>true</PlainText>
</Password>
</AutoLogon>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>3</ProtectYourPC>
</OOBE>
<UserAccounts>
<AdministratorPassword>
<Value>ca$hc0w</Value>
<PlainText>true</PlainText>
</AdministratorPassword>
</UserAccounts>
<TimeZone>Pacific Standard Time</TimeZone>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ProductKey>7M67G-PC374-GR742-YH8V4-TCBY3</ProductKey>
<ComputerName>*</ComputerName>
</component>
</settings>
</unattend>
****c:\windows\panther\setupact.log****
2013-03-29 16:40:07, Info [0x0f004d] SYSPRP The time is now 2013-03-29 16:40:07
2013-03-29 16:40:07, Info [0x0f004e] SYSPRP Initialized SysPrep log at c:\windows\system32\sysprep\Panther
2013-03-29 16:40:07, Info [0x0f0054] SYSPRP ValidateUser:User has required privileges to sysprep machine
2013-03-29 16:40:07, Info [0x0f0056] SYSPRP ValidateVersion:OS version is okay
2013-03-29 16:40:07, Info [0x0f005e] SYSPRP ScreenSaver:Screen saver was already disabled, no need to disable it for sysprep
2013-03-29 16:40:07, Info [0x0f007e] SYSPRP FCreateTagFile:Tag file c:\windows\system32\sysprep\Sysprep_succeeded.tag does not already exist, no need to delete anything
2013-03-29 16:40:07, Info [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'GENERALIZE'
2013-03-29 16:40:07, Info [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'OOBE'
2013-03-29 16:40:07, Info [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'REBOOT'
2013-03-29 16:40:07, Info [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'UNATTEND'
2013-03-29 16:40:07, Info [0x0f004a] SYSPRP WaitThread:Entering spawned waiting thread
2013-03-29 16:40:07, Info [sysprep.exe] UnattendFindAnswerFile: Looking at explicitly provided unattend file [c:\windows\panther\unattend.xml]...
2013-03-29 16:40:07, Info [sysprep.exe] UnattendFindAnswerFile: [c:\windows\panther\unattend.xml] meets criteria
for an explicitly provided unattend file.
2013-03-29 16:40:07, Info SYSPRP SysprepSearchForUnattend: Using unattend file at [c:\windows\panther\unattend.xml].
2013-03-29 16:40:07, Info SYSPRP SysprepSearchForUnattend: [generalize] pass in unattend file [c:\windows\panther\unattend.xml] either doesn't exist or passed
validation
2013-03-29 16:40:07, Info SYSPRP WinMain:Found unattend file at [c:\windows\panther\unattend.xml]; caching...
2013-03-29 16:40:07, Info SYSPRP WinMain:Processing unattend file's 'generalize' pass...
2013-03-29 16:40:07, Info SYSPRP Sysprep is running a generalize pass with the following unattend file: [%windir%\panther\unattend.xml]
2013-03-29 16:40:07, Info SYSPRP RunUnattendGeneralizePass: Sysprep unattend generalize pass exits; hr = 0x0, hrResult = 0x0, bRebootRequired = 0x0
2013-03-29 16:40:07, Info [0x0f003f] SYSPRP WinMain:Processing 'cleanup' request.
2013-03-29 16:40:07, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]
2013-03-29 16:40:07, Error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x80070020[gle=0x00000020]
2013-03-29 16:48:52, Info [0x0f004c] SYSPRP WaitThread:Exiting spawned waiting thread
2013-03-29 16:48:52, Info [0x0f0059] SYSPRP ScreenSaver:Screen saver was originally disabled, leaving it disabled
2013-03-29 16:48:52, Info [0x0f0052] SYSPRP Shutting down SysPrep log
2013-03-29 16:48:52, Info [0x0f004d] SYSPRP The time is now 2013-03-29 16:48:52Hi,
This is typical of an OEM license issue.
To avoid this in the future you should look at site/volume licensing.
Anyway.
so, first check if you can re-arm by runing the
slmgr.vbs /dlv and check the re-arm counter, if it set to zero.. you need to do the following :
http://support.microsoft.com/kb/929828 (set the <SkipRearm>1</SkipRearm> like in the example, note: this option will make the product key window to appear in the setup process).
you can also try running : slmgr.vbs -rearm, to rearm Windows.
after that, let's come back to the sysprep process.. for syspreping already syspreped machine we have to change few keys in the registry :
HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\GeneralizationState\
CleanupState:2
HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\GeneralizationState\
GeneralizationState:7
After done with the registry, do the following :
Start -> Run : msdtc -uninstall (wait few seconds)
Start -> Run : msdtc -install (wait few seconds)
Restart the machine
Check the registry for the right registry keys values
sysprep with the new XML answerfile.
Source: Olegm
If you find my information useful, please rate it. :-) -
Updating a record using variables
I want to use a variable(s) to update my record. I get a Java excpetion when using this code:
<%@ page import="java.sql.*"%>
<%@ include file = "/html/common/init.jsp" %>
<% String ticketid = request.getParameter("ticketid"); %>
<% String comment = request.getParameter("comment"); %>
<% String userid = user.getUserId(); %>
<% String comment_body = "comment_body" %>
<%
Class.forName("com.mysql.jdbc.Driver");
Connection con = DriverManager.getConnection("jdbc:mysql://localhost:3306/helpdesk", "root", "password");
Statement updStmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
ResultSet updRs = updStmt.executeQuery("SELECT * FROM HISTORY WHERE (ticketid) = ('"+ticketid+"')");
updRs.next();
updRs.updateString "('"+comment_body+"', '"+comment+"')";
updRs.updateRow();
con.close();
%>
Here is the exception;
An error occurred at line: 7 in the jsp file: /Projects/Help Desk/PostComments.jsp
Generated servlet error:
C:\Program Files\Liferay\server\default\work\jboss.web\localhost\_\org\apache\jsp\Projects\Help_0020Desk\PostComments_jsp.java:546: ';' expected
String comment_body = "comment_body"
^
An error occurred at line: 10 in the jsp file: /Projects/Help Desk/PostComments.jsp
Generated servlet error:
C:\Program Files\Liferay\server\default\work\jboss.web\localhost\_\org\apache\jsp\Projects\Help_0020Desk\PostComments_jsp.java:558: not a statement
updRs.updateString "('"+comment_body+"', '"+comment+"')";
^
An error occurred at line: 10 in the jsp file: /Projects/Help Desk/PostComments.jsp
Generated servlet error:
C:\Program Files\Liferay\server\default\work\jboss.web\localhost\_\org\apache\jsp\Projects\Help_0020Desk\PostComments_jsp.java:558: ';' expected
updRs.updateString "('"+comment_body+"', '"+comment+"')";
^
3 errorsThanks for the insult.<rant>
Your problem was that you were missing a semi-colon at the end of line, which every Java statement requires. The error messages that you posted would tell most people who have more than casual experience with compiling Java that you have a trivial syntax problem.
The people who take the time to answer the questions in this forum are mostly experienced professionals who answer questions on a volunteer basis out of the goodness of their heart. It takes time, it takes work, and we get the gratification of helping people, learning about new problems, and learning the tricks that the other pros know that we don't. Therefore it is frustrating to see a problem that ought to be solvable by anyone who's gotten past their first program harder than "hello world".
However, I don't see anything insulting in our responses so far, or about saying that the impression I have from this and all your other posts is that you don't have the first idea about how to do what you're trying to do and you want this forum to design your application for you. While design questions are certainly appropriate in the forum, both the basic level and the number of your questions suggest that you really need to spend some time getting educated, by reading books, all the Java "how to" articles on the web, or examining the code of all the open source projects that happen to do similar things. Or you should go to school, hire a tutor, or a mentor within your development environment. You're acting like you expect the forum to do your work for you, and be polite and happy about it.
I appreciate that trying to learn all these areas of Java at once is very hard and can be frustrating; it's taken me about 5 years to get to "above average" in some areas and I still have an enourmous amount to learn about other areas, even though I started as a senior programmer who has been working in non-Java, non-web areas for 25 years. Learning new technologies takes an enormous amount of work; your posting of an issue that many college freshman solve in their first "hands-on" project suggests to me that you are utterly unwilling to do your own work or take the time to think about your problems before posting. I write that not to insult you - it's truly how I feel - but to help you understand why you might not be getting the answers you seek in this forum; for many of us, you're just asking too much and whining about "insults" doesn't help your cause.
Sorry if we hurt your feelings. After that rant, I'm going to attempt to restrict my responses to the technical issues at hand.
</rant> -
Server java trace error while updating bulk records from AIX to Oracle 10g
Hi
I am getting an error in TCL (Tool Command language) script that updates the records in a database table i.e around 2500 records are to be updated. I am using update statement with bind variables to insert the data.
SQL "insert into netuser.visit_temp (FP_FROM,FP_TO,HOPS,FP_FROM_ID) values (:SN,:EN,:HP,:FPID)" [list SN $startnode EN $endnode HP $hops FPID $fpId]
However, after processing 900 or so records (takes around 8 hours) I get the following error:
environment variable "SERVER_JAVA_TRACE" undefined
while executing
"getenv SERVER_JAVA_TRACE"
invoked from within
"dotransaction {
logm "Processing $fp"
set value [SQL $query3 [list FP $fp]]
logm "Found value $value"
set fpid [Koplingspunkt quer..."
("foreach" body line 3)
invoked from within
"foreach fp $cmd2 {
UtilityObject cleanCache
dotransaction {
logm "Processing $fp"
set value [SQL $query3 [list FP $fp]]
logm "Found v..."
Could anyone please suggest the possible cause of error?Not a Java question. Locking.
-
Error while querying - You cannot update this record
Hi all,
I have a builded a form and was successful when i enter the data. But when i query the form it is showing me the error FRM-14050 YOU CANNOT UPDATE THIS RECORD.
I have pre-insert, pre-update and pre-query triggers at block level.
In PRE_INSERT iam setting the property to insert allowed and true.
same way for pre-update and pre-query.
Can any one guide me.
Thanks
SunilHi
check your fields name name and match with database fields.
vikas -
How To Update A Record? What is Wrong With My Code?
I tried to update a record and got the
java.lang.ArrayIndexOutOfBoundsException: 0
Here is my code:
public void updateLastPostMemberName(int threadID, // primary key
String lastPostMemberName)
throws ObjectNotFoundException, MessageDAOSysException
Connection conn = null;
PreparedStatement stmt = null;
String sql = "UPDATE message_thread SET last_post_member_name = '" + lastPostMemberName + "' WHERE thread_id = '" + threadID + "'";
try
conn = DBConnection.getDBConnection();
stmt = conn.prepareStatement( sql );
stmt.setString( 1, lastPostMemberName ); // this is the statement where the error occurred.
stmt.executeUpdate();
catch( SQLException se )
System.out.println( se.getMessage() );
se.printStackTrace();
throw new MessageDAOSysException( "Error executing SQL in ThreadHandler.updateLastPostMemberName." );
finally
if ( conn != null )
try
stmt.close();
stmt = null;
conn.close();
catch( SQLException sqlEx )
System.out.println( "Problem occurs while closing " + sqlEx );
conn = null;
}Natalie,
try this...
public void updateLastPostMemberName(int threadID, // primary key
String lastPostMemberName) throws ObjectNotFoundException,
MessageDAOSysException {
Connection conn = null;
PreparedStatement stmt = null;
String sql = "UPDATE message_thread SET last_post_member_name = ? WHERE thread_id = ?";
try {
conn = DBConnection.getDBConnection();
stmt = conn.prepareStatement( sql );
stmt.setString( 1, lastPostMemberName );
stmt.setInt(2, threadID);
stmt.executeUpdate();
catch( SQLException se ) {
System.out.println( se.getMessage() );
se.printStackTrace();
throw new MessageDAOSysException(
"Error executing SQL in ThreadHandler.updateLastPostMemberName." );
finally {
if ( conn != null ) {
try {
stmt.close();
stmt = null;
conn.close();
catch( SQLException sqlEx ) {
System.out.println( "Problem occurs while closing " + sqlEx );
conn = null;
}Good Luck,
Avi. -
How to only update existing records when loading master data ?
Hello experts, I need your lights one more time.
Here is my need :
I have created an infoobject (IO) which is a very simple version of 0material, let's call it Znewmat --> Znewmat has material type and trademark as attributes, those two fields are available in 2 different datasources :
- 0MATERIAL_ATTR for material type (field MTART)
- 0MAT_SALES_ATTR for trademark (field MVGR2)
When loading my new IO from 0MATERIAL_ATTR I use a filter (at DTP level) to get only a few material types (I get something like 1000 records),
here is my issue : when I load from 0MAT_SALES_ATTR the field "material type" is not available to keep the same filter as for 0MATERIAL_ATTR and existing records are updated with the trademark, but I also get 5000 records I don't need, and my master data is "polluated" with useless lines.
*and my question : is there a way while performing the second loading to ONLY UPDATE EXISTING RECORDS AND NOT ADD ANY
NEW RECORDS ? (i didn't find anything in main options of my DTP)*
(I'd like to avoid the solution to update the 0MAT_SALES_ATTR datasource to add the missing field)
Thanks in advance for any help, points will be distributed.
Guillaume P.
Still no idea ?in the start routine of transformation from 0MAT_SALES_ATTR to znewmat do the following:
select materials from /BIC/PZNEWMAT into i_mat
for all entries in source_package where material eq source_package-material.
loop at source_package.
p_ind = sy-tabix.
read table i_mat with key material = source_package-material.
if sy-subrc ne 0.
delete i_mat index p_ind.
endif.
this way you'll only update records that have previously been loaded by 0MATERIAL_ATTR DS
loading sequence:
first load ZNEWMAT from 0MATERIAL_ATTR. then activate ZNEWMAT. then load 0MAT_SALES_ATTR to ZNEWMAT.
M. -
What's the best way to insert/update thousands records in multiple tables
Can anyone give an example of how to insert/update thousands records in multiple tables on performance wise? or what should I do to improve the performance?
Thanks
jimYou can see a set of sample applications in various scenarious available at
http://otn.oracle.com/sample_code/tech/java/sqlj_jdbc/content.html -
I want to update multiple record in database which is based on condition
hi all,
I am using Jdev 11.1.2.1.0
I have one table named(Pay_apply_det) in this table i want to update one column named(Hierarchy) every time and according to change i want to update or i want to maintain my log table named(pay_apply_appr).It based on level wise approval when the lowest person approve the record show on next level but if the second
level person back it will be show only previous level hierarchy.And when the final approval happen the Posting_tag column of pay_apply_det will be updated too with hierarchy column.
i have drag pay_apply_det's data control as a table in my .jsf page and add one column approve status in UI .in the approve status i used radio group which return A for approve B for back R for reject through value binding i make it get or set method in it baking bean.
in backing bean class i have written code
public void approveMethod(ActionEvent actionEvent) {
ViewObject v9=new UtilClass().getView("PayApplyDetView1Iterator");
int h5=0;
Row rw9= v9.getCurrentRow();
String x=(String) rw9.getAttribute("RemarkNew1");
System.out.println(x);
String z=getR2();
System.out.println(z);
if(( z.equals("R") || z.equals("B") )&& x==null)
FacesMessage fm1 = new FacesMessage("Plz Insert Remark Feild");
fm1.setSeverity(FacesMessage.SEVERITY_INFO);
FacesContext context1 = FacesContext.getCurrentInstance();
context1.addMessage(null, fm1);
else{
ADFContext.getCurrent().getSessionScope().put("Radio",getR2().toString());
String LogValue=(String)ADFContext.getCurrent().getSessionScope().get("logid");
ViewObject voH=new UtilClass().getView("PayEmpTaskDeptView1Iterator");
voH.setWhereClause("task_cd='449' and subtask_cd='01' and empcd='"+LogValue+"'");
voH.executeQuery();
Row row1= voH.first();
int h1=(Integer)row1.getAttribute("Hierarchy");
System.out.println("Login Person Hierarchy on save button press.."+h1);
ViewObject vo9=new UtilClass().getView("PayApplyDetView1Iterator");
Row row9= vo9.getCurrentRow();
if(getR2().equals("A")&& h1!=1)
row9.setAttribute ("ApprHier",h1);
row9.setAttribute("IsClaimed","N");
row9.setAttribute("ClaimedBy",null);
row9.setAttribute("ClaimedOn", null);
else if(getR2().equals("B") ) {
ViewObject voO=new UtilClass().getView("LoHierViewObj1Iterator");
voO.setNamedWhereClauseParam("QHVO", LogValue);
Row rowO = voO.first();
h5=(Integer)rowO.getAttribute("LPrehier");
System.out.println("Back lower hier..."+h5);
row9.setAttribute ("ApprHier",h5);
row9.setAttribute("IsClaimed","N");
row9.setAttribute("ClaimedBy",null);
row9.setAttribute("ClaimedOn", null);
else if((h1==1) &&(getR2().equals("A")) )
row9.setAttribute ("PostingTag","Y");
row9. setAttribute ("ApprHier", h1);
row9.setAttribute("IsClaimed","N");
row9.setAttribute("ClaimedBy",null);
row9.setAttribute("ClaimedOn", null);
else if(getR2().equals("R"))
row9.setAttribute ("ApprHier",-1);
row9.setAttribute("IsClaimed","N");
row9.setAttribute("ClaimedBy",null);
row9.setAttribute("ClaimedOn", null);
BindingContext BC=BindingContext.getCurrent();
BindingContainer ac=BC.getCurrentBindingsEntry();
OperationBinding ob=ac.getOperationBinding("Commit");
ob.execute();
vo9.executeQuery();
FacesMessage fm = new FacesMessage("Your Data Successfully Commited..");
fm.setSeverity(FacesMessage.SEVERITY_INFO);
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage(null, fm);
}here i put my approve status radio value in session variable because i also want to update my pay_apply_appr table which code i written in pay_apply_det IMPL class.
Every thing is running well when i update single record but when i want to update multiple record then my current row only updated in pay_apply_det but log table( pay_apply_appr) created for all record.
so is there any solution plz help me.
thanks
RAFATHi Rafat,
If you are able to insert into, all you need to do is iterate through the rows. For this , before the first IF condition
if(getR2().equals("A")&& h1!=1)Get the row count using int numRows =vo9.getRowCount(); , and then write it before the IF condition
if (int i=0;i<numRows;i++} After
row9.setAttribute("ClaimedOn", null);
}write vo9.next(); to iterate to next row,
Hope this will work.
Nigel.
Maybe you are looking for
-
Highlighting a character in a string by mouse click
Hi , I am developing a software simulation for gene expression ( DNA - Protein ) using awt and applet. I cannot use swing. I am displaying the DNA and MRNA and PROTEIN with the help of drawstring. I have stored every single nucleotide base in the DNA
-
Metal bus garage signal problem
I need to set up wireless in a bus garage. The environment seems to have a lot of RF deflectors that interfere with the signal. The ceiling is corrugated metal, with Ibeams and metal piping running across it. The garage doors are some kind of meta
-
After "Hello World" - my first adventure in accepting user input
Hey I'm trying to teach myself java and I'm attempting to move on from printing hello world to the screen :) I've written the following: import java.io.*; public class firstapp { int value1, value2, result; public static
-
Static Verse Non-Static Methods
Let say I was going to write a class that contained methods to do the same thing as itoa() and atoi() functions in C. What would be the pros and cons of making those methods static verses non-static?
-
I am trying to get the music to rotate. Example, a song is playing and after it finishes it moves to the top of the list. How do I create a playlist that will do this procedure? I had it before and my power went out which wipe out the function.