Unhandled exception causes app to fail
Hi,
I have a problem with my visual studio 2008 application. It is written in vb and uses Crystal Reports 2008 v12.2.0.290. I have one client who has intermittent problems where the program closes down with an unhandled exception. What's odd is that I have an unhandled exception handler coded but it doesn't fall into it. The client has 1gb of Ram. I changed her drive swap file from 750k to 4gb and that seemed to help the problem. Help, but not make it go away.
My application is single instance, and other calls to run reports go into that instance. The client has other computers where the problem doesn't happen.
Does anyone have any idea what I can try next? What would cause an unhandled exception that goes around the unhandled exception handler? Is it possible this is caused by trying to call a dll that is no longer responding to my program?
I have run modules comparing a successful run to a failed run on the same computer. I have a list of dll's that were not loaded for the failed run.
BROWSEUI CRYPTUI IERTUTIL NORMALIZ RASAPI32 RASMAN RTUTILS SHDOCVW SYNCOR11 TAPI32 URLMON WININET WINMM.
I am not sure how much help this is as they may simply have not loaded because the programs shut down.
thanks,
Dan
The dlls from the Modules do not really show much.
I would like you to get on SP 3 though;
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
SP 3 msi
https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip
SP 3 msm
https://smpdl.sap-ag.de/~sapidp/012002523100007123582010E/cr2008sp3_mm.zip
Note that in order to install SP3 runtime on the existing install, you will first have to uninstall the current SP0 runtime that is there.
If the issue persists, it would be good to try to determine some sort of a pattern;
Report Specific?
When printing?
When exporting?
Load?
Etc.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Similar Messages
-
hi guys,
In my app i am using a ad control.It works fine in windows phone 7 .But in windows phone 8 it causes crash my app.I used a ad_errorOccured event and there it says capabilities missing(ID_CAP_MEDIAIB).But I have checked all the capabilities in windows phone
8.All have been checked in WMAppmanifest file.
System.Diagnostics.Debug.WriteLine("ad error " + e.Error.Message.ToString());
message---e.Error.Message = "Required capabilities are missing from manifest (WMAppManifest.xml): ID_CAP_MEDIALIB."
where as all media capacity has been enabled,dont know what is causing my crash app........
pls help
dj_FoxHello,
You should ask in the
Windows Phone Development forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog:http://unlockpowershell.wordpress.com
My Book:Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Unhandled Exception Error - Login Failed for User
Hello,
I am receiving an error when I run my application stating “Unhandled exception has occurred. If you click continue, the application will ignore the error………..Login failed for MyUser.
When I click the Continue button the application runs and seems to work properly. This application used to run without receiving the error and I did not make any changes. I have another application that is using basically the exact same code and does not
receive the error. The only difference is the application is querying a different DB but using the exact same connection string. The error only occurs when I run the exe file created from the build. When I run (debug) the application from within the VS 2013
IDE I do not receive the error.
Here are the details to the error message:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.OleDb.OleDbException (0x80040E4D): Login failed for user 'jobrunner'.
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at LoanOrig_FDIC_Codes.DataSet1TableAdapters.I_LoansTableAdapter.Fill(I_LoansDataTable dataTable) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\DataSet1.Designer.cs:line 1668
at LoanOrig_FDIC_Codes.Form1.Form1_Load_1(Object sender, EventArgs e) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\Form1.cs:line 152
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
LoanOrig_FDIC_Codes
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///U:/Visual%20Studio%20Projects/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/bin/Debug/LoanOrig_FDIC_Codes.exe
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34238 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
System.Data.DataSetExtensions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.DataSetExtensions/v4.0_4.0.0.0__b77a5c561934e089/System.Data.DataSetExtensions.dll
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
System.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I'm not sure what the JIT debugger is but to my knowledge my other apps are not using that. The production username and password are correct in the connection string so I'm not clear why I am receiving this error especially since I'm not receiving the
error on my other application. I have also attached the code just in case it is needed. Any assistance will be greatly appreciated. Thank you.
Dave
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using ClosedXML.Excel;
using DocumentFormat.OpenXml;
using System.IO;
namespace LoanOrig_FDIC_Codes
public partial class Form1 : Form
SqlCommand sqlCmd;
SqlDataAdapter sqlDA;
DataSet sqlDS;
DataTable sqlDT;
SqlCommand sqlCmdCnt;
public Form1()
InitializeComponent();
//BEGIN BUTTON LOAD CLICK EVENT
private void btnLoad_Click(object sender, EventArgs e)
string sqlCon = "Data Source=FS-12345; Initial Catalog=ExtractGenerator; User ID=MyUser; Password=MyPW";
//Set the 2 dateTimePickers to today's date
DateTime @endDate = End_dateTimePicker.Value.Date;
DateTime @startDate = Start_dateTimePicker.Value.Date;
//Validate the values of the 2 dateTimePickers
if (endDate < startDate)
MessageBox.Show("End Date must be greater than or equal to the Start Date OR Start Date must be less than or equal to the End Date ", "Incorrect Date Selection",MessageBoxButtons.OK,MessageBoxIcon.Error);
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
return;
//End of date validation
string sqlData = @"SELECT AcctNbr,
CurrAcctStatCD,
Org,
MJAcctTypCD,
MIAcctTypCD,
NoteOriginalBalance,
ContractDate,
FDICCATCD,
FDICCATDESC,
PropType,
PropTypeDesc
FROM I_Loans
WHERE CAST(ContractDate AS datetime) BETWEEN @startdate AND @enddate ORDER BY ContractDate";
SqlConnection connection = new SqlConnection(sqlCon);
SqlCommand sqlCmd = new SqlCommand(sqlData, connection);
sqlCmd.Parameters.AddWithValue("@startDate", startDate);
sqlCmd.Parameters.AddWithValue("@endDate", endDate);
sqlDS = new DataSet();
sqlDA = new SqlDataAdapter(sqlCmd); //SqlAdapter acts as a bridge between the DataSet and SQL Server for retrieving the data
connection.Open();
sqlDA.SelectCommand = sqlCmd; //SqlAdapter uses the SelectCommand property to get the SQL statement used to retrieve the records from the table
sqlDA.Fill(sqlDS, "I_Loans"); //SqlAdapter uses the "Fill" method so that the DataSet will match the data in the SQL table
sqlDT = sqlDS.Tables["I_Loans"];
//Code section to get record count
sqlCmdCnt = connection.CreateCommand();
sqlCmdCnt.CommandText = "SELECT COUNT(AcctNbr) AS myCnt FROM I_Loans WHERE ContractDate BETWEEN @startDate AND @endDate";
sqlCmdCnt.Parameters.AddWithValue("@startDate", startDate);
sqlCmdCnt.Parameters.AddWithValue("@endDate", endDate);
int recCnt = (int)sqlCmdCnt.ExecuteScalar();
txtRecCnt.Text = recCnt.ToString();
btnExport.Enabled = true;
//End of code section for record count
connection.Close();
dataGridView1.DataSource = sqlDS.Tables["I_Loans"];
dataGridView1.ReadOnly = true;
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
//END BUTTON LOAD CLICK EVENT
//BEGIN BUTTON EXPORT CLICK EVENT
private void btnExport_Click(object sender, EventArgs e)
SaveFileDialog saveFD = new SaveFileDialog();
{ //ClosedXML code to export datagrid result set to Excel
string dirInfo = Path.GetPathRoot(@"\\FS-03250\users\dyoung\LoanOrig_FDIC_Codes");
if (Directory.Exists(dirInfo))
var wb = new XLWorkbook();
var ws = wb.Worksheets.Add(sqlDT);
ws.Tables.First().ShowAutoFilter = false;
//SaveFileDialog saveFD = new SaveFileDialog(); //I moved this variable to the top of the btnExport code block so that the variable will be available thru the entire scope of that code block
saveFD.Title = "Save As";
saveFD.Filter = "Excel File (*.xlsx)| *.xlsx";
saveFD.FileName = "LoanOrig_FDIC_Codes_" + DateTime.Now.ToString("yyyy-MM-dd");
if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.OK)
Stream stream = saveFD.OpenFile();
wb.SaveAs(stream);
stream.Close();
else if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.Cancel)
MessageBox.Show("Save file operation has been canceled", "Save As Canceled", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
//End of ClosedXML code
MessageBox.Show("File has been exported to " + saveFD.FileName, "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
//MessageBox.Show("File has been exported to U:\\LoanOrig_FDIC_Codes", "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
else
MessageBox.Show("Drive " + saveFD.FileName + " " + "not found, not accessible, or you may have invalid permissions");
//MessageBox.Show("Drive " + "U:\\Visual Studio Projects\\LoanOrig_FDIC_Codes" + " " + "not found, not accessible, or you may have invalid permissions");
return;
//END THE SAVE AS PROCESS
//END BUTTON EXPORT CLICK EVENT
private void Form1_Load(object sender, EventArgs e)
//Set dates to be today's date when the form is openend
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
private void Form1_Load_1(object sender, EventArgs e)
// TODO: This line of code loads data into the 'dataSet1.I_Loans' table. You can move, or remove it, as needed.
this.i_LoansTableAdapter.Fill(this.dataSet1.I_Loans);
private void iLoansBindingSource_CurrentChanged(object sender, EventArgs e)
private void btnExit_Click(object sender, EventArgs e)
this.Close();
David YoungIn SQL you have a login which allows access to the server but you must also have permissions to access each database that you will use (including Master). So I would verify that your user also has the necessary permissions on the database itself and
not just the SQL instance. The error you're getting is from SQL saying that the user doesn't have permissions. If it works for 1 DB but not the other on the same SQL instance then it is likely a missing permission on the DB itself.
I should note that you have a hard coded conn string in your code but the error is for a different user. I'm assuming that you simply posted it there for convenience and that you changed the values to obscure the data. If you are actually getting
the info from your config file then verify the connection string is correct. Also be sure to not use Integrated Security since it appears that you are using SQL authentication. -
Import failed. Unhandled Exception in Import Manager
I'm just starting with MDM (5.5 SP1) and have created my first Import but keep getting an "Import failed. Unhandled Exception. RC: 0x82030100" when I Execute Import. I'm not sure where to look to determine the cause. Any suggstions?
Hi Russell,
On your C drive, under Program Files>SAP MDME 5.5>Import Manager is the first place to start- Import manager log is an XML document created, and shows the steps import manager went through before it failed. It could give some ideas about the cause. Other than that, I have seen that not setting key mapping accurately can cause this exception.
Good luck! -
EM failed to show any charts on home screen with "Unhandled exception..."
Hello,
I have a 11gr2 2-node RAC on Linux environment. At this time, emctl status dbconsole shows it's up and running. But upon logging in, the main page give error
"Unhandled exception during generation of chart Host CPU.
1. java.lang.Exception: Invalid BoundDataSource: no class, method or dataSource provided.
2. at oracle.sysman.emSDK.chart.EmChartBoundDataSourceBean.initDataSource(EmChartBoundDataSourceBean.java:98)"
Looking at the emoms.trc file, here is some more errors:
2011-09-22 14:15:48,218 [EMUI_14_15_48_/console/rac/racSitemap] ERROR db.rac initProblemServices.2011 - Failed to determine problem services: ORA-20206: Target does not exist: ORCL:rac_database
ORA-06512: at "SYSMAN.MGMT_TARGET", line 571
ORA-06512: at "SYSMAN.EMD_RAC", line 2550
ORA-06512: at "SYSMAN.EMD_RAC", line 2474
ORA-06512: at line 1
2011-09-22 14:15:48,226 [EMUI_14_15_48_/console/rac/racSitemap] ERROR db.rac initComps.1507 - java.sql.SQLException: ORA-20206:
ORA-06512: at "SYSMAN.EMD_MNTR_HOST", line 576
ORA-01403: no data found
ORA-06512: at line 1
java.sql.SQLException: ORA-20206:
ORA-06512: at "SYSMAN.EMD_MNTR_HOST", line 576
ORA-01403: no data found
ORA-06512: at line 1
2011-09-22 14:15:48,375 [EMUI_14_15_48_/console/rac/racSitemap] ERROR chart.EmChartBean constructLayout.759 - java.lang.Exception: Invalid BoundDataSource: no class, method or dataSource provided.
2011-09-22 14:15:48,379 [EMUI_14_15_48_/console/rac/racSitemap] ERROR chart.EmChartBean constructLayout.759 - java.lang.Exception: Invalid BoundDataSource: no class, method or dataSource provided.
2011-09-22 14:16:48,136 [MetricCollector:RACHOMETAB_THREAD600:60] ERROR rt.RacMetricCollectorTarget _getAllData.278 - java.lang.NullPointerException
java.lang.NullPointerException
Any pointers here?
Thanks,Also, i did some research on the error "unhandled exception" and it suggests to apply patch 9935898. Upon running opatch apply, it gives the following...
Oracle Home : /u01/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /u01/app/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.2.0.1.5
OUI version : 11.2.0.1.0
OUI location : /u01/app/oracle/product/11.2.0/dbhome_1/oui
Log file location : /u01/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch2011-09-22_14-31-53PM.log
Patch history file: /u01/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt
ApplySession applying interim patch '9935898' to OH '/u01/app/oracle/product/11.2.0/dbhome_1'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 9935898: Required component(s) missing : [ oracle.sysman.oms.core, 11.1.0.1.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74 -
Hi All,
I have created a custom web part in VS 2008 for Share point server 2010 with DevExpress v12.2.17, and deployed as Sandboxed solution. when i add that web parts in web part zone i am getting the error as "Web Part Error:
Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: An unexpected error has occurred. ".
If there is any way to get detailed error either log file or event viewer.
Kindly advice to find the cause of the problem.
Thanks,
Selvakumar.SHello,
Are you impersonating your code? Have you tried to debug your code by attaching SPUCHostService.exe? if not please do so.
You also need to check ULS log for more information about this error. Here is one ref link if this could help
http://sohilmakwana.wordpress.com/2013/11/29/sandbox-error-unhandled-exception-was-thrown-by-the-sandboxed-code-wrappers-execute-method-in-the-partial-trust-app-domain/
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Building CS4 Virtual App throws Unhandled exception
I've done a snapshot of CS4 on a VM (no tools installed).
When I try to build the app I get a Unhandled exception has occurred.
Exception type "SystemOutofMemory was thrown"
My VM has 2GB ram. I am using no vmtools on this occasion since I read in
the forums someone had success with that. It makes no difference with the
error whether I have vmtools installed or not.
ThomasThomas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Tear down of include component context failed due to an unhandled exception
My Application was developed with JDeveloper 11.1.1.3.0 . one of the page has a panel collection with simple table that fetch the data from a view object.
filter and sorting are enabled for all columns.
this page runs correctly on the integrated WLS server and on the standalone WLS of the same Fusion Middleware package on my pc.
I've then deployed the ear file on two different WLS server with the same version. the panel collection with the table did not displayed, and found the error below in log files.
Also after that error, the application does not accept any request, and I have to close the browser and start a new session.
Error Details from the log :
Module : oracle.adf.view.rich.component.fragment.UIXInclude
Message: Tear down of include component context failed due to an unhandled exception.
java.util.NoSuchElementException
at java.util.ArrayDeque.removeFirst(ArrayDeque.java:251)
at java.util.ArrayDeque.pop(ArrayDeque.java:480)
at oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl.popContextChange(ApplicationContextManagerImpl.java:66)
at oracle.adf.view.rich.component.fragment.UIXInclude.tearDownVisitingContext(UIXInclude.java:206)
at oracle.adf.view.rich.component.fragment.UIXPageTemplate.tearDownVisitingContext(UIXPageTemplate.java:248)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.encodeEnd(ContextSwitchingComponent.java:157)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1071)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1515)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:785)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Thank you Shah,
No, I did not do that , and I don't understand.
however, all other pages in the applications works fine, and forms and tables are displayed and working fine.
could you please explain more ? -
Query Notification fail with unhandled exception (orageneric11.dll) error
Please help
trying to run "Continuous Query Notification Example" from
http://docs.oracle.com/cd/B28359_01/appdev.111/b28395/oci10new.htm
(after some modifications example launchs and begin "waiting for Notifications")
then i make changes in oracle table "test_table" which "myCallback" listens.
After commit changes in table programm get notify about this changes and call function "myCallback"
Then myCallback call function "processQueryChanges" which
fail programm with exception in debug:
"unhandled exception in mytest.exe (orageneric11.dll): 0x0000005 Access Violation"
void processQueryChanges(....)
for (i=0; i < num_queries; i++)
//!!!!!fail in this string!!!!!
checker(errhp, OCICollGetElem(envhp,
errhp, (OCIColl *) query_changes,
i, &exist, &query_descp, &elemind));
I found version of the decision
but it doesn't work
decision text:
To resolve this Oracle issue add the following entry to your SQLNET.ORA file.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
DIAG_ADR_ENABLED=OFF
DIAG_SIGHANDLER_ENABLED=FALSE
DIAG_DDE_ENABLED=FALSE
visual studio 6.0 sp6, oracle client 11.1.0
Edited by: 958639 on 12.09.2012 6:00Hi Efstratios,
Yes, I have imported all the transports and all of they are success. I am able to use SAP authentication and able to create connection and retrive all InfoCubes and Quries also. Error is only when i select the query to create universe.
As i understand from the erros shown is , in the server some graphis card or driver is missing.
Moreever, I am looking for loging into the Desinger using SAP authentication from Client machine. For SAP authentication, i should install Integration Kit in client machine.( corect me if i am wrong ). To install Integration KiT , it is asking Crystol report server in desktop before integration kit.
Does it require ?
Regards,
Suresh -
Hi All,We are receiving below errors in our production envrionment as The Web Service plug-in failed in OrganizationId: c28f361a-8111-e211-b7f2-68b599c03df8; SdkMessageProcessingStepId: 36ccbb1b-ea3e-db11-86a7-000a3a5473e8;
1.EntityName: userquery; Stage: 30; MessageName: RetrieveMultiple;
Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation
Inner Exception: System.IndexOutOfRangeException: #TotalRecordCount
<Data>Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.IndexOutOfRangeException: #TotalRecordCount
2.EntityName: email; Stage: 30; MessageName: RetrieveMultiple
Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation
Inner Exception: System.NullReferenceException: Object reference not set to an instance of an object
<Data>Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation
Inner Exception: System.NullReferenceException: Object reference not set to an instance of an object.
3.
EntityName: plugintype; Stage: 30; MessageName: RetrieveMultiple;
<Data>Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.InvalidOperationException: There is already an open DataReader associated with this Command which must be closed first.
Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.InvalidOperationException: There is already an open DataReader associated with this Command which must be closed firstPlease give us idea on above issues.
Natarajan.VHi,
What version of CRM you are using? Does this happen when you open the case record?
We have faced the similar for Account record and was solved using below query. I am not sure about incident.
Update ACC
SET ACC.Merged = 0
from AccountBase ACC
WHERE ACC.merged is null
Do you have case merge option enabled on incident entity? As per the MS it is enabled for CRM 2013 SP1 and CRM 2015.
http://www.microsoft.com/en-us/dynamics/crm-customer-center/merge-similar-cases.aspx
Thanks!
Kalim Khan -
When I launch the latest (as of Jan 2005) Automation Explorer on my system, it causes an unhandled exception.
I've taken a digital picture of the information on the blue screen.
IS anyone from NI reading these forums? I can email you this picturePlease email in to our customer support with an attachment of the blue screen. Then we can analyze your blue screen and you can give us more information about your system (hardware, software, driver versions, etc.) and we can help you determine what is causing your computer to crash.
Joshua Prewitt
National Instruments -
Generate causes SCC Query Error: Unhandled exception
Hi folks,
I have Robohelp X5, I am composing on my local machine with
saves going to an RCS server. I've pretty much figured out that RCS
has a problem with the skins in Robohelp, because if I go to create
a custom skin, I can create it in a non-controlled project. The
second I go to create a custom skin in the controlled version, I
get an infinite loop of the SCCQueryError message, Unhandled
Exception Message Boxes. I have to kill Robohelp, and reboot to get
out of the error message.
Whenever I go to generate the verson controlled project, I
get at least six of these error messages, but the project is
generated and I can open it and can't seem to find anything
missing. So, even though I get the errors in a generate, they don't
affect the ability to generate a project.
I've already checked to be sure that the RCS server is
accepting all the file extensions.. that was my first thought was
that it didn't like the .swf extensions.
Anyone else have or see this problem?
Thanks!Thank you Eilsa... It's a touch complicated, but I am working
off my hard drive, and Robohelp is installed on my hard drive. The
webhelp file that is integrated with the project is being pushed to
the a folder on the development server where RCS resides, and my
project files are being archived in another directory on the RCS
version tracker.
I get the SCC query error (which seems to be an RCS version
tracker error) right after I generate either a local or server
webhelp, about six in all. So I'm thinking that there is some file
extension that RCS is blocking, because I don't get the errors when
I do the same thing with a non-version tracked project.
Forget about trying to create any skins.. (and this is on my
local, too) I have to switch to a non-version tracked project to
create the skins.
But just trying to see if anyone else has seen the
problem.. -
Upgrading instance to PL 10 on Web Tools - causes Unhandled Exception Error
Help - trying to do an upgrade to an existing PL 08 Web Tools live site on a hosted Web Server.
When I run the installer and as to do an upgrade to an existing instance, I hit the finish (or really start) button and I get this unhandled exception error
Any ideas???? Thanks
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.IO.FileLoadException: Could not load file or assembly 'NetPoint.API, Version=2007.0.630.10, Culture=neutral, PublicKeyToken=d935c97cd97f6431' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'NetPoint.API, Version=2007.0.630.10, Culture=neutral, PublicKeyToken=d935c97cd97f6431'
at Installer.Workers.BackupDBWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
Installer
Assembly Version: 2007.0.630.10
Win32 Version: 2007.0.630.10
CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Tools/Installer/Installer.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.ServiceProcess
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.In all likelihood, the dlls are not being replaced because they are in use, and the installer is trying to load the old version which did not get replaced.
You can try manually turning off the synch service and messaging service. Also, make sure the synch manager is not running.
Then uninstall.
Check the installer and synchmanager directoriesw in your C:\Program Files\SAP\SAP Business One Web Tools folder (or where ever it was installed) to make sure all .dll and .exe files have been removed. If not, something is probably still open an using them.
If the dll and exes have been cleared out. Then run the installer (the installer that installs the installer )
check the version of the files that were installed in synchmanager and installer directories.
they should be 2007.0.630.10. -
FRM-40735: WHEN-NEW-RECORD-INSTANCE trigger raised unhandled exception
I have a form that I migrated to 10g from 6i. I have no problems with it in 6i.
When I launch this migrated form on the web in 10g, I get the following error:
Error: FRM-40735: WHEN-NEW-RECORD-INSTANCE trigger raised unhandled exception ORA-03127From oracle error code
03127, 00000, "no new operations allowed until the active operation ends"
// *Cause: An attempt was made to execute a new operation before the active
// non-blocking operation completed or a new operation was attempted
// before all the pieces of a column were inserted or fetched.
// *Action: Execute the new operation after the non-blocking operation
// completes. If piecewise binds/defines were done, execute the new
// operation after all the pieces have been inserted or fetched.What does the above suggested action mean?
Any suggestions.
ThanksRun the debugger and see what line of code is failing.
-
Problem: Stopping cluster due to unhandled exception .. Unable to refresh
Greetings
While testing a rolling upgrade of an application that uses Coherence 3.5.2 on 62-jvm cluster hosted on
11 physical machines, we encountered a situation where after the upgrade was completed, most jvms
in the system abruptly left the cluster. The physical hosts are running CentOS 5.4, the java used is
the 64-bit server version 1.6.0_16-b01. The test was run under a scenario that imposed "moderate"
load, with cpu usage on the physical machines never exceeding 60% busy, network bandwidth never
exceeding 5%, and with some free physical memory. Swapping did not occur during any time during
the test. I believe we are using the default tangosol-coherence.xml. We got the error below in
our coherence.log files on all of the systems, all at about the same time (within 10 milliseconds).
55 of the jvms left the cluster during the incident. There were 55 copies of the error message in
the various logs, all nearly identical except for the time and member id.
My questions include
- what does the error mean?
- what could cause it? (I investigated system logs, and found no evidence of the NIC cards
going off line at the time. Any suggestions about how to look for evidence of broadcast storm?)
- how can we keep it from happening again?
Many thanks for your help -
Mike Murphy
2011-04-26 17:34:14,629 Coherence Logger@9224544 3.5.2/463 ERROR 2011-04-26 17:34:14.629/1929.311 Oracle Coherence GE
3.5.2/463 <Error> (thread=PacketListenerN, member=30): Stopping cluster due to unhandled exception: com.tangosol.net.mes
saging.ConnectionException: Unable to refresh sockets: [UnicastUdpSocket{State=STATE_OPEN, address:port=10.48.88.116:809
1}, MulticastUdpSocket{State=STATE_OPEN, address:port=224.3.5.2:10013, InterfaceAddress=10.48.88.116, TimeToLive=4}, Tcp
SocketAccepter{State=STATE_OPEN, ServerSocket=10.48.88.116:8091}]; last failed socket: MulticastUdpSocket{State=STATE_OP
EN, address:port=224.3.5.2:10013, InterfaceAddress=10.48.88.116, TimeToLive=4}
at com.tangosol.coherence.component.net.Cluster$SocketManager.refreshSockets(Cluster.CDB:91)
at com.tangosol.coherence.component.net.Cluster$SocketManager$MulticastUdpSocket.onInterruptedIOException(Cluste
r.CDB:9)
at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:33)
at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketLis
tener.CDB:19)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.SocketTimeoutException: Receive timed out
at java.net.PlainDatagramSocketImpl.receive0(Native Method)
at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
at java.net.DatagramSocket.receive(DatagramSocket.java:712)
at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketLis
tener.CDB:19)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)Hi Mike,
It looks like you are having problems with multicast. You can run the multicast test described here
[http://download.oracle.com/docs/cd/E15357_01/coh.360/e15723/tune_multigramtest.htm]
which will help in diagnosing the problem
Maybe you are looking for
-
User Exit for Partner Determination in VA01, VA02 transaction ( Sales order
Dear All, I have an issue in which i need to determine partner for every change in ship to party both at header and item level during sales order creation or change. Can you please suggest an appropriate user exit for the same. I have tried EXIT_SAPL
-
is there any way to block the shutdown of the device is protected by password? This function would help in case of theft with the issue of the find my iphone app.
-
Hello, After Pacman runs (after installing, upgrading, removing, etc), there is an annoying output that shows: ~ $ sudo pacman -S somepackage file owned by 'X' and 'Y': '/path/to/file' ~ $ I know that the output is (usually) caused by the --force opt
-
I can not access cutaway feature in imoive11 tried everything suggested on forum,
I already went to preferences and selected advance features. I am selecting from events library. I know how to select however when I drop it on timeline on a clip already placed there it is placed next to it. There are options availabe but not the on
-
Hello! I have been using kodo 4.1.2 as my backend for a long time now without touching it. I did some work on my maven repository recently, and I am no longer able to use the cached version of openjpa due to this problem: [INFO] [ERROR] BUILD ERROR [