Unified Timeout Issue in BPEL

Hi all,
We have two BPEL processess one ReqCS which is the "calling BPEL" and PS which is the "called BPEL". The called BPEL PS has a number of calls to database and wrappers. The problem is that the ReqCS BPEL which is calling the PS BPEL gets faulted. But the PS BPEL gets completed. We r getting the error Description as "Waiting for response has timedout. We tried changing the sycnMaxTime of the BPEL but it didnt help. PS has quiet a number of calls which makes the output XML as a huge one. We can see the output XML in the instance of the PS. But we couldnt see the instance of the ReqCS BPEL.
Regards
Prabhu
Edited by: Prabhu on Mar 23, 2011 6:42 AM

And Also this is working fine when the output xml is less sized.
Regards
Prabhu

Similar Messages

TimeOut Issue in BPEL

Hi all,
We have two BPEL processess one ReqCS which is the "calling BPEL" and PS which is the "called BPEL". The called BPEL PS has a number of calls to database and wrappers. The problem is that the ReqCS BPEL which is calling the PS BPEL gets faulted. But the PS BPEL gets completed. We r getting the error Description as "Waiting for response has timedout. We tried changing the sycnMaxTime of the BPEL but it didnt help. PS has quiet a number of calls which makes the output XML as a huge one. We can see the output XML in the instance of the PS. But we couldnt see the instance of the ReqCS BPEL.But this is working fine when the PS BPEL XML is less size.
Regards
Prabhu

And Also this is working fine when the output xml is less sized.
Regards
Prabhu

Svn with Apache Timeout issue

Hello Archers,
I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
https://wiki.archlinux.org/index.php/LAMP
https://wiki.archlinux.org/index.php/Subversion_Setup
Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
This is a client error message:
Commit failed (details follow):
Unexpected end of svndiff Input
And this the corresponding server side log:
[date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
I think I don't have specified the timeouts correctly, since I haven't found the default option.
tl:dr
Do you know how to set the timeouts in the apache configuration file?
I very much appreciate your help.
arch on pi
Here are my configuration Files with my position for the timeout order:
httpd-ssl.conf:
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
SSLRandomSeed connect file:/dev/urandom 512
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
Listen 443
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/run/httpd/ssl_scache"
SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout 6000
## SSL Virtual Host Context
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/mnt/sda1/svn"
ServerName 192.168.178.48:443
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
TransferLog "/var/log/httpd/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
SSLCertificateFile "/etc/httpd/conf/server.crt"
#SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
#SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/etc/httpd/conf/server.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
#SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
#SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/srv/http/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/var/log/httpd/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#SSLSessionTimeout 5m
Timeout 600000
<Location />
DAV svn
SVNParentPath /mnt/sda1/svn/repos
AuthzSVNAccessFile /home/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /home/svn/.svn-auth-file
# Satisfy Any
Require valid-user
</Location>
</VirtualHost>
httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
Timeout 60000
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#nach fehlermeldung
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#Felhermeldung undefined symbols
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#nach Fehlermeldung
LoadModule cache_socache_module modules/mod_cache_socache.so
#nochne Fehlermeldung
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#Fuer die cipher suite
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#1 for svn
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#2 for svn
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#3 for svn
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/mnt/sda1"
#<Directory "/mnt/sda1/svn/repos">
# # Possible values for the Options directive are "None", "All",
# # or any combination of:
# # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# # Note that "MultiViews" must be named *explicitly* --- "Options All"#
# # doesn't give it to you.
# # The Options directive is both complicated and important. Please see
# # http://httpd.apache.org/docs/2.4/mod/core.html#options
# # for more information.#
# Options Indexes FollowSymLinks
# # AllowOverride controls what directives may be placed in .htaccess files.
# # It can be "All", "None", or any combination of the keywords:
# # AllowOverride FileInfo AuthConfig Limit
# AllowOverride None
# # Controls who can get stuff from this server.
# Require all granted
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Edit: inserted tl;dr
Last edited by arch_on_pi (2014-05-18 21:33:24)

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

SSRS Timeout issue

I am using SSRS for generate reports in my .net web application. For one of the report, an error "An error has occurred during report processing." is returned after 100s. The report can be generated successfully in report server
at around 3 minutes. So, I believed it is caused by timeout issue in one of the processes. However, i have verified the timeout settings but still got no ideas on how to fix it.
My code is a bit complicated since the connection type of my report's data source is an customized dll. In the dll, i will call an webservice to get data. Below is summary for the flow:
UI -> Reporting Service -> Customized Dll -> Web service -> SQL/Stored Procedures
The execution timeount in the web.config of both the reporting service and web service are set to 9000s (<httpRuntime executionTimeout = "9000" />). And coding about timeout of the service is set to 3000s (i.e. ReportingService rs = new ReportingService();
rs.timeout = 3000000;). In the execution properties of the report, Report Execution Time is set to "Do not timeout report execution" currently.
I think there is no problem for the customized dll and the web service it calls since it can be generated in report server direclty. But I have no idea about where the timeout occurs. Please kindly help.
Thanks,
Shirley

Hi Shirley,
According to your description, you encountered time out issue when rendering your report in your web application. Right?
In Reporting Services, we have report execution timeout value and query timeout value for processing report and dataset. In this scenario, you have already set the report executionTimeout and "Do not timeout report execution" on report level. Since
this time issue only happens on specific report, it probably cause by processing large amount of data which exceeds the max query timeout. Please go to rsreportserver.config file and change the QueryTimeOut into "0". This file locates at
xx:\Program Files\Microsoft SQL Server\MSRS12.MSSQLSERVER\Reporting Services\ReportServer
<Add Key="DatabaseQueryTimeout" Value="0"/>
Reference:
Setting Time-out Values for Report and Shared Dataset Processing (SSRS)
Troubleshooting Timeout errors in Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

TopLink issue on Bpel 10.1.3.3

We are having an issue with the bpel flow on Bpel 10.1.3.3 where when it is inserting into the database, not all of the fields are saving to the database.Several of the fields are being stored as null in the database although there are values
that should be saved. I deployed the flow on both Bpel 10.1.2 and Bpel 10.1.3.3 which have same database connection. Bpel 10.1.2 has no problem. My flow is created by Bpel 10.1.2 designer. I also use JDveloper 10.1.3.3 to migrate the flow and then deploy it on Bpel 10.1.3.3. However, I am still facing an issue on Bpel 10.1.3.3.
The data being inserted to database which I saw it from Bpel console.
<description>CAR-47511-000073*EBS.01088</description>
<exchangeRateType>ALEXTEST</exchangeRateType>
<invoiceAmount>4086.82</invoiceAmount>
<invoiceCurrencyCode>USD</invoiceCurrencyCode>
<invoiceDate>2006-03-20T08:00:00</invoiceDate>
<invoiceId/>
<invoiceNum>ALEX-000002|EBS.000002</invoiceNum>
<orgId>204</orgId>
<invoiceTypeLookupCode>STANDARD</invoiceTypeLookupCode>
<source>TRANSPORTATION MANAGEMENT</source>
<vendorId>3932</vendorId>
<vendorSiteId>4646</vendorSiteId>
However, only invoice id, source, vendor id, vendor site id are inserted into dabase. All others are nulls.
Any idea? thanks !!

To complement information:
1/ Zoom in doesn't have this issue:
both Ctrl + Numpad + and Ctrl + = are working
On AZERTY keyboard = and + are on same key.
2/ When using Ctrl + Numpad - , I observe same behaviour as Ctrl + 6 (opens a box to comment)...
Can you at least fix Ctrl + Numpad - for zoom out?
(this won't be unversal but will at leas save 90% of the issues)

Performance issues in BPEL

We are having an integration wherein the messages coming via b2b are being passed on to the bpel process for further processing..
When we are testing with about 500 transactions means 500 separate files each having one transaction in it ..one ST SE transaction data block in it only about 10 transactions are being processed in parallel by the bpel process...while the remaining transactions go into the manual recovery queue.
so at a time only about 10 bpel instances are getting created and then once few of these transactions get completely processed by the bpel process..slowly the transactions from the Manual Recovery Queue gets assigned to a new bpel instance..means a new bpel instances get created..
we are expecting a load of about 16000 transactions for the entire day and the concern here is that we need all of these b2b transactions to be processed by the bpel process in about 5 to 6 hours...is it possible in any way that we change the configuration setting such that more number of parallel bpel instances could be trigerred at the same time so that this could increase the processing speed on the bpel side.
Could someone please help us out with this slowness issue in bpel.
thanks

Have a look at this doc
http://www.oracle.com/technology/tech/soa/soa-suite-best-practices/soa_best_practices_1013x_drop1.pdf
The section on threading should answer you question. You need to set the dspMaxThreads property to the appropraite level for your environment. Make sure your hardware is able to cope.
cheers
James

ABAP Query Code timeout issue

Hi,
I have a SAP query which was the following code which is causing a timeout issue when running the report, can anyone suggest how I can change the code to make it more efficent?
* This gets the sum of all labour costs on WBSEs.
clear X_COEP_WKGBTR_LAB_W.
if PRPS-OBJNR is not initial.
select sum( WKGBTR ) from COEP
    into X_COEP_WKGBTR_LAB_W
    where
    PERIO = ZPERIODT
    and
    GJAHR = ZYEAR
    and
    KSTAR >= 'A43'
    and
    KSTAR =< 'A43ZZZZZZZ'
    OR
     KSTAR = '0005767012'
    and
    OBJNR = PRPS-OBJNR.
endif.
thanks
Joe

Hi Joe,
I see none of the Key fields were used in select query.
Create a secondary index for the table and use it in select query.
It increases the performance.
COEP~1 and COEP~2 are already existing.
select sum( WKGBTR ) from COEP
    into X_COEP_WKGBTR_LAB_W
    where
    PERIO = ZPERIODT
    and
    GJAHR = ZYEAR
    and
    KSTAR >= 'A43'
    and
    KSTAR =< 'A43ZZZZZZZ'
    OR
     KSTAR = '0005767012'
    and
    OBJNR = PRPS-OBJNR
%_HINTS ORACLE 'INDEX("COEP" "COEP~1").
Thanks,
Anil

TimeOut Property in BPEL

Hi,
We have a requirement to Indroduce a Timeout Property to 60 secs at BPEL Process level. Usually TimeOut Property will be placed at Partner Link level. Is there any way to introduce the Timeout Property at BPEL Process level? We can change the BPEL Property in BPEL Console but it will apply this property for all the BPEL processes deployed in the instance.
Any help on this will be highly helpful.
Thanks,
Saravana

Hi:
Is it for BPEL 10g?
If it so, take a look to the BPEL Best Practices Guide http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf
there is a very clear explanation about the time out parameters.
thx
best

SNMP Service Timeout Issue

Hi,
I am facing SNMP timeout issue with 3 of my Windows Servers (2008 R2 Enterprise Edition). I am using Network Monitoring System to monitor devices. The issue I am facing with these servers is that the NMS is not able to poll CPU and Memory graphs.
I have restarted the SNMP service many times but no use. I rebooted one server and Its problem is gone. But rest of the two servers are still with the same condition (not rebooted yet).
I used the "Paessler SNMP Tester" to check the issue but sometimes it passes and mostly gives "No response" or "Timeout".
I also used "SnmpWalk.exe" with command 'snmpwalk -r:<server ip> -c:community' but after processing few OID's it gives error "%Failed to get value of SNMP variable. Timeout."
Can anyone help to identify the problem and how to resolve it?

Hi Zain,
Can you try to ping your server with the command "ping your server ip
-t"? It may be a network issue.
Besides, is there any warning or error related SNMP in the event viewer of the server? It may give some hints.
Here is a article about how to troubeshoot SNMP,
Troubleshooting SNMP
http://technet.microsoft.com/en-us/library/cc738839(v=WS.10).aspx
Best Regards.
Steven Lee
TechNet Community Support
Hi Steven,
Thank you for the response. I tested "SnmpWalk" both locally on the same server and from network as well but the response is same
"%Failed to get value of SNMP variable. Timeout.". However, I have checked the ping response and it is very much smooth. The server is actually an Active Directory Domain Controller.
The article you provided above applies to Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2. I have Windows Server 2008 R2 installed on servers.
Can you provide me the event id for any warning or error related to SNMP for Windows Server 2008 R2? It would be then easy for me to filter the alerts.
Thank you!

SQL server Timeout issue in data insertion

We are loading data from DB2 database to SQL server using Data flow task. During data insertion in SQL server, we are receiving the below error.
"An exception has occurred during data insertion, the message returned from the provider is: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
Kindly help to resolve this issue.
Thanks!!!

Check the connection timeout property of the source connection.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a5571966-b14e-45c6-9ce8-4f5651d3ee00/ado-net-destination-timeout-issue?forum=sqlintegrationservices
Regards, RSingh

Timeout issues in synchronous webservices

Hi Everybody,
I am working on a synchronous webservice Interface in which sender is a Webservice and receiver is BAPI (RFC) and I need to handle the time out issue when i dont get the response from the receiver SAP system.Also need to raise an alert.
Can anybody help me out on this.
Helpful answers will be rewarded points.
Regards,
RK

Hi,
For the timeout issue look at these:
Web Service Timeout Configuration
SOAP adapter - Module options...
For the alert I think you should take a look at these:
Does XI support standard SOAP Fault exceptions?
SOAP Fault message (***)
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
Hope it helps.
Best Regards,
Arman
(Please mark your question as answered when it is solved)

Airport Express and Extreme both having timeout issues once every few days.

I have both an Airport Express and an Airport Extreme in the house (one on each side of the house), and for the last few months, we have been experiencing timeout issues with both. About once every few days, my computer (or any other computer here - all Macs) will lose connection to the hub. When I try to reconnect in the Wifi menu, it says "Connection timed out". Also, on my iPhone, when I try to connect, it says "Unable to connect".
All this takes is a quick restart of the Airport (just pull the power out and plug in), but this is VERY frustrating. I've updated to the latest firmware... I'm not sure what else to do.
Any ideas?

Ok, thanks for clarifying that for me. I suggest starting by reviewing the following AirPort User Tip around the details for best base station placement. Let's see if this will help increase the bandwidth performance of your extended network. Most likely, due to combination of distance and Wi-Fi interference, you may not be getting the best bandwidth possible. Please post back your results.

MBP wifi "connection timeout" issue

My 2010 macbook pro has trouble connecting to many wifi networks. It works fine connecting to my network at home, but any sort of public wifi or hotel or friend's network is likely to give it trouble.
I get the "connection timeout" issue, and I know that I'm not the only one, but I didn't manage to find anything that worked from scouring this forum. Just to delinate the issue: all my other devices (iPad, iPhone, other laptops) connect fine to wifi networks in exactly the same places. I managed to find a workaround by getting a cheap wifi dongle that connects fine in precisely the same places that the MBP's built-in antenna does not. Is there any way to fix this, or am I just stuck dongling it up?

Try going into Network Preferences > Wi-Fi > Advanced. Click the network you're trying to join and click the minus button. This forces your mac to forget any saved credentials associated with that network and it will try to make a fresh connection. You can also try Network Preferences > Assist me... > Diagnostics to give you some more troubleshooting suggestions. It will probably tell you to restart your router/modem which sometimes works but you're usually not allowed to do to this to a public wifi hotspot.
It's also possible that your AirPort Extreme card, which is the part your mac uses to connect to wifi, is failing. Since 2010's are no longer under warranty, you can look up the iFixit guides to see if you're feeling adventurous enough to replace it yourself (if it is replaceable).

TimeOut Issue in invoking Synchronous Web Service in BPEL.

Hi All,
There is one BPEL process which is calling third party web service synchronously but sometimes my requests get failed in 30 sec giving the following error:-
*"oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): https://aaa.bb.cc.dd/abc/def/xyz"*
When I checked this in soa_server1-diagnostic.log, I found that it is giving some Read Time Out error.
Currently following settings are there on the server:-
syncMaxWaitTime = 45 sec
EJB Time Out:- 300 sec
JTA Timeout:- 360 sec
If there is no setting of 30 sec then why my partner link is failing in 30 sec. Morever the intresting point is that although It is giving some Exception but it is performing the operations successfully. Due to this exception rest of my BPEL does not work.
Please provide me the pointer how to increase the Read time out and is there any relation between httpReadTimeout (Defined in composite for Partner Link) and syncMaxWaitTime.
Thanks In Advance,
Regards,
Lovenish
Edited by: lovenish on Jun 13, 2012 10:56 PM

Hi Lovenish,
Goto console-> select domain> Configuration->JTA
Check timeout seconds.
2. i don't know what kind of partner link you are invoking.
check composite.xml, is there any property like retry.interval .
3. ◦SyncMaxWaitTime: The maximum time a request and response operation takes before timing out.
The maximum time a request/response operation will take before it times out. The default value is 45 seconds.
Regards,
Padmanabham

Bpel timeout issue...payload size is 6MB...

Hi All,
what is the max payload size could be processed through oracle soa BPEL composite, I have a requirement that data(records of 2k-4k) of total size 6MB comes from DB, and each record has to be to sent to an external webservice,but it timesout, Iam looping all records and invoking each record to an external webservice.
Any ideas to make it succesful.
Thanks in advance.
Cheers,
ramana.

Hi Ramana,
Is your BPEL Process synchronous? if so, can you change your bpel process to asynchronous process and try to do the same.
Cheers,
Sahil

Unified Timeout Issue in BPEL

Similar Messages

Maybe you are looking for