Uninstall application terminal server 2012 r2

i just want to be sure what is the proper way to uninstall an aplication in terminal server 2012 r2
It seems that i have installed adobe reader for all user with the proper way using install application in remote desktop
But i have many error messages from application
so i need to uninstall it i just want to be sure i do it the right way.
Thanks

Hi,
Did you install the application via
Install applications on Remote Desktop Services wizard? Just a confirmation, thanks for your understanding.
Please open Control Panel, navigate to Programs and Features, then select the application and click Uninstall. For more details, please refer to following thread
and check if can help you.
uninstalling
multi user applications in RDS
Meanwhile, the question seems to be more related to Terminal Services. I suggest that you should post this question in
Remote Desktop Services (Terminal Services) forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Cannot Print in IE11 on Terminal Server 2012

    I am having an issue with printing with IE11 in Terminal Server 2012.
    Issue-
    The print preview shows up as blank, and when I hit print, nothing happens(the print window never shows up). I can print from other applications fine. Additionally, this is only affecting one user on my terminal server. Everyone else is able to print out
    of Internet Explorer fine. I have tried launching IE with add-ons disabled and the problem exists in both 64/32 bit IE. I have rebooted my terminal server. The user is still unable to print from IE. I have checked that enhanced IE security is off.
    Nothing seems to be working here.
    Any suggestions?

    Hi,
    According to your description, this just occurs to particular user profile. Please check if there is a Low folder existed in following path:
    "%userprofile%\AppData\Local\Temp
    If it does exist, take these steps to apply the integrity level:
    1.Open a Command Prompt, and then click Run as administrator.
    2.Type following command and press ENTER:
    ICACLS "%userprofile%\AppData\Local\Temp\Low" /setintegritylevel (OI)(CI)low
    3.Restart the computer.
    4.Print or print preview a Web page in Internet Explorer.
    Alex Zhao
    TechNet Community Support

  • RDC to MS Terminal Server 2012

    Hi,
    I try to connect to a terminal server 2012.
    Neither with MS RDC nor CoRD are working. Message licencing probs...
    Google gives some solution to modify the registry of the server, this is of course not a very good way. Is there maybe another solution possible?
    Thanks
    //Flo

    Hi,
    I think you should add the new 2012 Windows Server as the Primary DNS, then demote the windows server 2003.
    Please check the following article for detail:
    http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
    Regards.
    Vivian Wang

  • SCCM 2012: install applications to terminal server (2012)?

    Hi,
    I'm trying to deploy a hotfix for App-v to a terminal server (Windows 2012). The install of the App-v 5.0 SP2 client worked fine but the install of the hotfix doesn't install silently to RDS-servers (the same install parameter works on a Windows 7 client
    = setup.exe /accepteula /qn).
    Problem: installation starts but then the installation screen pops up.
    Probably related to RDS (I should give some extra installation parameters? But why the App-v 5.0 SP2 client then installated without any issues)?
    Pls advise.
    J.
    Jan Hoedt

    How many servers? In cases like this it can be quicker to install it manually. After all, this is a one-time scenario.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Windows Terminal Server 2012 wont publish any more remote apps!

    I have a weird problem with our new Windows 2012 Terminal Server. We have already published one application through a session collection via Remote Desktop Services. We now have the need to publish another application. When I click on the "Tasks"
    drop down menu and select "Publish RemoteApp Programs" I get an error of "Server.domain.local is not available on the network. Verify that the server is available on the network or remove the server from the collection"
    Does anyone have any ideas why I am seeing this?
    Thanks

    Hi,
    Thank you for your posting in Windows Server Forum.
    First of all please check that you have enough permission or performing with admin account. 
    I have installed many RemoteApp in my environment and can’t find this error until now. 
    Have you recently made any changes in your environment before facing this issue? 
    Did you tried to restart the server and then try to launch new Remote App?
    By the way, can you let us know which program you want to publish as Remote App, so if possible then we can try to install and let you know the result.
    In meantime, please try to publish new RemoteApp with PowerShell command as Administrator and let us know the result. You can try below command. In this example, we create a RemoteApp to deliver WordPad. We use the following command;
    new-rdremoteapp -Alias Wordpad -DisplayName WordPad -FilePath "C:\Program Files\Windows NT\Accessories\wordpad.exe" -ShowInWebAccess 1 -collectionname MySessionCollection -ConnectionBroker LS01.CRFB.Local
    For more information, refer beneath article.
    Managing Remote Apps using PowerShell on Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Terminal Server 2012 Setup

    Hi, I am going to update one of my terminal servers from 2008 to 2012. The server itself runs only one application so I used the always start the following application when someone logs on from the 2008 terminal server options. does anyone know if
    this is possible in 2012?

    Hi Moe,
    As a workaround, I’d like to know whether the program will be started under the working directory through group policy.
    These Group Policy settings are located in the following locations:
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment\Start a program on connection
    User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment\ Start a program on connection
    For detailed information about this settings, please refer to the following article:
    Specify a Program to Start Automatically When a User Logs On (You can perform for server 2012)
    http://technet.microsoft.com/en-us/library/cc770821.aspx
    Hope it helps!
    Thanks.

  • Lost window, using published application on server 2012, when access it via web remote.

    Hi,
    We use an edi software installed on a Server 2012.
    When we use this software accessing the server by Remote Desktop, everything works normal.
    When we use the same software accessing the server by web access, (...softname/RDWeb/Feed/webfeed.aspx) where was published this soft application, we lost some windows after different actions.
    For example if I do a modification for a value in one specific window, after I click save, that window disappear but can appear again only if I click again anywhere on my desktop.
    In other words that window lost the focus and probably is still open under another window. Clicking again anywhere, will reactivate it and that window appear again.
    Can you please help me to find a solution to this problem?
    Thank You!

    Hi,
    For example if I do a modification for a value in one specific window, after I click save, that window disappear but can appear again only if I click again anywhere on my desktop.
    Would you please tell us which window and what has been modified specifically?
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Slow printing with rdp Terminal server 2012

    Hi,
    we've got some problems with slow printing on a wan link with RDP to server 2012, i tried several solutions like:
    Disable easy print service ( it shoud be to increase performance but it doesn't work)
    option: Send the print job directly to the Printer
    I'm out of my options, there are no connection problems with the remote branch office and before using server 2012 they had terminal server 2003 and printing works fine over rdp.
    Thanks for your advice

    Did you monitor the spooling size of the print jobs?
    Depending from the drivers and the software used there may flow a serious amount of data, since both hardware and software makers no longer care about efficient programming, if it comes to bandwidth and storage occupation sizes. Slow WAN connections do not
    fit in to their picture any more ...
    This was still different in the Server 2003 era.
    Best greetings from Germany
    Olaf

  • Terminal Server 2012 Standard Temp user logon

    I have a 2012 r2 server with two virtual servers one is a 2012 standard PDC the other is a 2012 Standard terminal server both are non r2 editions. If I created a new or existing user they get logged on with a temp profile. I have already tried all the
    googled fix/repair options, this is my last effort. I have tried the whole delete regedit profilelist and temp files. I have added the user to the local admin and domain admin for testing purposes. I have tried the hot fix kb
    2896328. Any help or hint would be helpful.

    Hi Matt,
    Does the same issue happen on both virtual machines?
    Are there any related error messages in the Event Logs?
    If there are any, please post them out so that we can better analyze the issue.
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • App-v 5.0 sp3 Publish application icons/ shourtcut missed on 2nd time logon on terminal server 2012 r2 with roaming profile with folder redirection

    1. I updated app-v 5.0 sp3 environment on 2012 R2. Roaming profile users with folder redirection logon fine at first time applications icons available but at 2nd logon applicaitons icons are missed while packages are available. we are using existing
    roaming profiles with folder redirection which are running in current environment through APP-V 4.6 2008 R2. Please suggest work around to resolve this issue.
    2. TS Nodes of 2008 R2 with App-v 4.6 running fine on Microsoft 2012 private cloud but we are facing performance issue (stuck, slow logon, slow performance etc) when we are moving in new 2012 R2 private cloud. SAP, SCSM and other sevices are running
    fine, please provide solution.
    Thanks

    1.) What are you doing with the App-V Icon path? e.g. %LOCALAPPDATA%\Microsoft\AppV\Client\Integration\<GUID>\Root\AppVClientUX.exe.0.ico ?
    I guess you could workaround it with deploying the icons to a central location and then pointing to the icon out on a central share. Or put the icons in a machine location...I haven't had this issue but that's just off the top of my head.
    2.) I have not used App-V 4.6 in an environment like yours BUT would pre-caching the applications be possible? Any chance you'll be moving those apps into App-V 5.0 soon?
    PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
    rorymon.com Twitter: @Rorymon

  • Terminal Server 2012 - Adobe Acrobat will not stay as the Default PDF Application

    Hello,
    This worked flawlessly in the past and not sure what happened and now even thought the default app for handling pdf is Adobe Acrobat, when you double click on a document it opens on Adobe Reader. not all my users use Adobe Acrobat so i have to keep adobe reader on the server as well (for licensing ). simply right clicking on the file to "open with" is not an option, users need to be able to open the file from our accountancy software. I have already tried switching the default app and switching it back with no luck. any help is greatly appreciated!
    Thanks

    Pretty sure that this was never tested but that being said... What was the order of installation?
    Windows Terminal Services — Enterprise Administration Guide

  • How to uninstall applications in SCCM 2012 R2

    Hi,
    We have installed following applications using "Applications" mode of SCCM 2012 R2.
    XML Notepad
    Notepad++
    Adobe Reader XI
    How do we uninstall these applications from clients using SCCM 2012 R2? Do we create deployment type for each and uninstall?

    You can configure an install and uninstall command line for each deployment type. Then there are 'install' and 'uninstall' deployments. Uninstall deployments can be used to uninstall software. Keep in mind that an install deployments wins over an uninstall
    deployment if both are deployed to the same machine.
    Torsten Meringer | http://www.mssccmfaq.de

  • Is CS4 illustrator compatible with Windows Terminal Server 2012 (64bit)?

    Please can you confirm if the CS4 version of illustrator will work on a 64bit version of Windows 2012 TS?

    You won't get any confirmation on this. Adobe desktop applications are not in any way tested or certified for any server operating systems. This doesn't mean that it couldn't work, but you will have to figure out things yourself and it may take a lot of work to e.g. configure the server's user policies so the activation system can actualyl function.
    Mylenium

  • Domain Controller deletes user account settings and applications - windows server 2012

    once in a month, when the user logs into his account, his settings and some applications get deleted. he has to install the outlook again, dropbox gets deleted, setting on the desktop disappears (files are still there) etc
    I am not sure about the cause or the solution. please let me know what i can do to fix this

    Hi,
    All the user has the same issue?
    Did the issue occur when you log into the Domain Controller?
    Any event id in event viewer?
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Outlook 2013 in a 2012 r2 Terminal Server environment and crashes after initial setup. It will not launch in safe mode

    I am running terminal server 2012 R2 (RDS environment) In Windows Domain, 8 users across a LAN on a new server.  Outlook 2013 crashes and will not load in safe mode. Outlook allows the initial profile setup and when the configuration is complete, it
    crashes and will not launch or launch in safe mode. I have deleted the outlook profile and reconfigured it.  The problem continues on all user accounts. The firm is not using Exchange and  is using a POP3 account. I have a 13 user Office Volume License
    (per device) and 15 terminal server Licenses ( per user)
    Problem Event Name :      APPCRASH
    Application Name:            Outlook.EXE
    Application Timestamp :   52b0b282
    Fault Module Name :        OUTLOOK.EXE
    Fault Module Version :     15.0.4569.1503
    Fault Module Timestamp:  52b0b282
    Exception Code:                 C0000005
    Exception Offset:                00340b9
    OS Version:                      6.3.9600.2.0.0.16.7
    Local ID :                         1033 
      Any help would be much appreciated.

    follow this instruction to troubleshoot Outlook crash issue:
    http://support.microsoft.com/kb/2652320
    Flynn

Maybe you are looking for