Uninstall Exchange contains replicas problem

I am trying to uninstall exchange 2007 (it was never used (installed by default on a sms box) and want to free up space).
I run the uninstall and an error cannot continue. The public folder database cannot "***\Second storage group\public folder database" contains replicas
I then run the command from the exchange shell
Get-PublicFolder -Identity \ -GetChildren | Remove-PublicFolder -Recurse
I get the error cannot find a mailbox to logon the public folder database.
I also run
Get-PublicFolder -Server *** "\" -Recurse -ResultSize:Unlimited | Remove-PublicFolder -Server *** -Recurse -ErrorAction:SilentlyContinue
*** server name
And get the same error - I don't know exchange very well so basic instructions would help
Cheers for your time

Hi
If you are sure that the public folder database is not used and all of the folders on it are actually copies of data held elsewhere then you can remove it using ADSIEdit:
http://blog.dargel.at/2012/01/19/remove-public-folder-using-adsiedit/
Steve

Similar Messages

Error While Attempting to Uninstall Exchange 2013 Mailbox Servers

Hi everyone,
We recently migrated all of our users from Site A to Site B. Now, I'm trying to remove the Exchange mailbox servers that were in Site A, since we're going to be decommissioning the site. All of these mailbox servers have been removed from the cross-site
DAG, and all other services have been moved over to Site B as well (mail flow, CAS, etc). However, when I try and uninstall Exchange from any of the seven mailbox servers (I've tried it on two so far, with the same result), I get the following error at Step
7 of 11:
Error:
The following error was generated when "$error.Clear();
          & $RoleBinPath\ServiceControl.ps1 DisableServices $RoleRoles.Replace('Role','').Split(',');
          & $RoleBinPath\ServiceControl.ps1 Stop $RoleRoles.Replace('Role','').Split(',')
        " was run: "Service 'Microsoft Exchange Information Store (MSExchangeIS)' cannot be configured due to the following error: The specified service has been marked for deletion".
If I exit the Uninstall sessions, and then reboot in order to try again, it just states "An incomplete installation was detected. Run setup to complete Exchange installation." It appears that all Exchange files are still on the server too, however,
the server in question is no longer listed in the EAC under the "Servers" section.
Any ideas?

Hi,
According to this error, this issue may be caused by legacy PF database replicas and legacy Mailbox
store pointing to the PF database. Please try to delete the legacy PF database container from ADSIedit.msc, the run setup and reboot the server to solve this issue.
The path in ADSIedit should be like this:
CN=Mailbox Database ,CN=Databases,CN=Exchange Administrative Group ,CN=Administrative Groups,CN=Your company name, CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Your company name,DC=com
Please collect other relative events in Application logs for troubleshooting.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Can't uninstall Exchange 2013 - (Distribution groups)

I need help uninstalling Exchange 2013. The uninstaller fails with these 2 errors:
This computer is responsible for expanding the membership of 1 distribution groups. These groups must be reassigned to another server before Setup can continue.
This computer is responsible for expanding the membership of 1 dynamic distribution groups. These groups must be reassigned to another server before Setup can continue.
I've gone so far as to disabling all distribution groups which removes its email properties and the uninstaller still fails.
This is what happens in the eventlog:
System.Management.Automation.ParseException: At line:1 char:67
+ Get-DynamicDistributionGroup | where {$_.ExpansionServer -eq '/o='s-Hertogenbosc ...
+ ~~~~~~~~~~~~~
Unexpected token 's-Hertogenbosch/ou=Exchange' in expression or statement.
At line:1 char:175
+ ... s/cn=CADEXCDB13'}
+ ~~
The string is missing the terminator: '.
At line:1 char:38
+ Get-DynamicDistributionGroup | where {$_.ExpansionServer -eq '/o='s-Hertogenbosc ...
+ ~
Missing closing '}' in statement block.
at System.Management.Automation.PowerShell.EndInvoke(IAsyncResult asyncResult)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.ClosePipeline(MonadAsyncResult asyncResult)
] [ParentValue:"<NULL>"] [Thread:11] [Duration:00:00:00.0156248]
I'm sure what happens here is the powershell commands looking at the distribution groups fail, because of our city name ('s-Hertogenbosch). Because of the apostrophe, the parameter is not passed successfully of this legacyExchangeDN. As this check fails,
I believe the readiness check fails on these steps.
This legacy administrative group name is still left from a 2003 -> 2010 -> 2013 migration.
I've opened a Microsoft support request for this last week, but I thought someone might have dealt with this? I want to do a clean uninstall if possible.

After I removed the distribution groups, I did restart the server.
The problem is the the powershell script to check for existing distribution groups use a single quote to pass the server name to it. The server name contains a single quote itself so the parameter is not passed successfully. If the powershell script
used a double quote it would pass the parameter correctly.
This works:
Get-DistributionGroup | where ExpansionServer -eq "/o='s-Hertogenbosch/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CADEXCDB13"
This does not work:
Get-DistributionGroup | where ExpansionServer -eq '/o='s-Hertogenbosch/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CADEXCDB13'
Do you see the difference? (Parameter is passed in a single or double quotation)

Can't Uninstall Exchange 2013

I have just installed Server 2012 R2 Standard on a brand new machine. Everything was working perfectly.
I installed Exchange 2013 and have been unable to log in to the ECP. It does not recognize my admin credentials, which is the ONLY user on the server at this time.
I have read EVERY article I can find on the subject and none of the offered solutions seem to work so I tried to uninstall Exchange and try a fresh install. This is there error message i receive when trying to uninstall...
Error:
Uninstall can't continue. Database Mailbox Database 0651560477 : This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, public folder mailboxes or arbitration mailboxes. To get a list of all mailboxes in this database, run the
command Get-Mailbox -Database <Database ID>. To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of archive mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Archive.
To get a list of all public folder mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -PublicFolder. To get a list of all arbitration mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Arbitration.
To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID>. To disable an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -Archive.
To disable a public folder mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -PublicFolder. Arbitration mailboxes should be moved to another server; to do this, run the command New-MoveRequest <parameters>.
If this is the last server in the organization, run the command Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox. Mailbox plans should be moved to another server; to do this, run the command
Set-MailboxPlan <MailboxPlan ID> -Database <Database ID>. It was running the command 'Remove-MailboxDatabase 'CN=Mailbox Database 0651560477,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=contoso,DC=local' -whatif'.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UnwillingToRemoveMailboxDatabase.aspx
This is the result of my PS commands...
PS C:\Users\Administrator> Get-MailboxDatabase
Name
Server
Recovery ReplicationType
Mailbox Database 0651560477 CONTOSOSRV
False None
PS C:\Users\Administrator> Get-Mailbox
Name Alias
ServerName ProhibitSendQuota
Administrator Administrator
contososrv
Unlimited
DiscoverySearchMailbox... DiscoverySearchMa...
contososrv 50 GB (53,687,091,200 bytes)
PS C:\Users\Administrator> Get-Mailbox -Arbitration -Database 0651560477 | Disable-Mailbox -Arbi
trationMailboxAllowed
Get-Mailbox : Couldn't find database "0651560477". Make sure you have typed it correctly.
At line:1 char:1
+ Get-Mailbox -Arbitration -Database 0651560477 | Disable-Mailbox -Arbitration -Di ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-Mailbox], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 76242DBC,Microsoft.Exchange.Management.RecipientTasks.GetMailbox
Can someone PLEASE help me with a solution?

The name of the database is "Mailbox Database 0651560477" not "0651560477"
If you really want to do this. Perhaps bring up another new 2013 and simply move the arbitration mailboxes to it instead before removing them?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Cannot uninstall Exchange 2007

When I try to uninstall Exchange 2007 I get the following error under the Mailbox Role.
The virtual directory 'ExchWeb' already exists under 'server.domain.com/Default Web Site' Parameter Name: VirtualDirectoryName.
I actually tried removing the ExchWeb virtual directory on the Exchange 07 server but that didn't help. I haven't been able to find anything else on the internet regarding this issue.
Vincent Sprague

Hi,
From error "Exchange server "server" was not found. Please make sure you have typed it in correctly", I recommend you check if the Exchange 2007 server is under the CN=Servers container in ADSIEDIT.
If it is there, based on the situation, you couldn't uninstall Exchange 2007 Mailbox role via Add/Remove Programs or using Setup.com /mode:uninstall /role:<server roles to remove> command. The last resort is to uninstall Exchange 2007 Mailbox role
using ADSIEDIT, the method using ADSIEDIT should be only be used carefully.
If it isn't there, maybe the suggestion mentioned in the following thread can help you.
Unable to uninstall Exchange 2007 SP2 'Exchange server was not found.' - manual uninstall time?
http://social.technet.microsoft.com/Forums/exchange/en-US/fbea8afb-3d50-4ed1-b2f5-9bd28f648815/unable-to-uninstall-exchange-2007-sp2-exchange-server-was-not-found-manual-uninstall-time?forum=exchangesvrgenerallegacy
Here is an article about how to remove Exchange 2007 from a computer for your reference.
How to remove Exchange 2007 from a computer:
http://support.microsoft.com/kb/927464
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Cannot Uninstall Exchange 2003 from former SBS2003 server

Hi,
I have this problem uninstalling Exchange 2003 from a prior SBS2003 installation.
Started with SBS2003 with Exchange2003 on server1
Then added server2, with Exchange2003 Standard
Then transitioned succesfully Server1 from SBS2003 to Server2003 Standard with Exchange2003 standard.
Now I have added 3 Exchange2010 servers and migrated completely to Exchange2010.
Uninstallation of Exchange2003 Standard from Server2 went succesfully.
I cannot find a way to uninstall the last Exchange2003 Standard from Server1
In Control Panel add remove programs there's no option to enter SBS setup anymore.
When starting setup.exe from SBS CD2 (i386 directory) I'm asked for a Product Key but I have no valid key to enter. Tried SBS key, Transition key, nothing works.
When downloading an Exchange2003 SP2 installation exe I only have the option to upgrade the existing installation. No option to uninstall.
What is the way forward? I'm stuck right now.
Regards,
Joost

Hello,
If you don't uninstall exchange 2003 in Control Panel add/remove programs, you may need to uninstall it by ADSIEDIT. Do not remove this Administrative Group unless you’re absolutely sure there’s
no object in Active Directory referencing this Administrative Group in the ExchangeLegacyDN attribute.
More information for your reference.
http://blog.dargel.at/2012/02/23/remove-legacy-exchange-server-using-adsi/ (Note: Microsoft is providing
this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand
the risk before retrieving any suggestions from the above link.)
http://technet.microsoft.com/en-us/library/bb288905.aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Uninstalling Exchange 2003 from Additional DC

Hello,
We have an old exchange 2003 installed on additional Domain Controller. We have already moved all the mailboxes to exchange 2007 server. Now we would like to uninstall exchange 2003 from Domain Controller.
Will Domain Controller have any problems when we try to uninstall exchange 2003 ?
http://www.arabitpro.com

Hi syed,
Thank you for your question.
If all services which are on Exchange 2003 have migrate to Exchange 2007 and run without any problems for a long time, we could uninstall Exchange 2003 from control pane.
If there are any issues after you uninstall Exchange 2003; welcome to our forum for help.
If there is a reminder there is previous Exchange in organization when you deploy Exchange 2013 in the future, we could navigate the follow path to delete Exchange 2003;
Run ADSIEDIT.msc in RUN;
Navigate Configuration[domain.com]>service>Microsoft Exchange>domain>Administrative Groups>Exchange Administrative Group>Server;
Then we find the previous Exchange server and delete it.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

FF 3.6 AND 5 on same Mac, 1 profile - can I uninstall 5 without causing problems running 3.6 or with the profile?

I upgraded from 3.6.16 to 5, but don't like how 5 handles tabs (auto reloading 'problem loading' tabs when internet connection is reestablished). So I installed 3.6 in a separate folder, e.g. both versions are on this computer. I went back to using 3.6, and let it upgrade to either 3.6.18 or 19 (don't recall which & it's not open right now). I'm having problems with it using too much CPU & Memory, and not sure if that's a difference between 3.6.16 & 3.6.18/19, or if having 5 on the same computer even if closed could be causing the problem.
Can I uninstall 5 without causing problems with the 3.6 version and the single profile?

If you haven't tried this, give it a try. It worked for me, hopefully it will work for you. In your version 3 firefox, disable all extensions, I had two plugins (doubletwist and joost, disable those if you have them). Then install firefox 5 by overwriting your version 3 firefox. It should work fine after that. I tried everything before, I gave that a last ditch shot. Oh yeah, before you install firefox 5, clear your cache of everything just to be sure.
Hopefully that helps.

All websites down after uninstalling Exchange 2010 from Web Server

Hello,
I successfully uninstalled Exchange 2010 (Client Access Role) from a webserver that hosts a company website and some other web apps, as a last step on a migration to 2013. But after that, some application pools were not started automatically, resulting on a
503 error even after starting the app pools manually.
I was getting IIS event Id 5139.
Fortunately it is a hyper-v server so I applied a snapshot I created prior to uninstalling exchange and got it working again. I need to know what happened before doing it again.
I would like to know about similar scenarios and how did you fix it.
thanks in advance.

Hi RCKSTR,
Are you running website in Exchange? If yes it is not a recommended way of working. Exchange is supposed to a standalone.
Websites will not run if IIS uninstalled.
Ensure IIS is installed and your website settings remains the same.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Uninstalling Exchange 2013 SP1 failed on Step 8 Lanugage

Hello,
I am trying to uninstall Exchange 2013 SP1 but it is failing while uninstalling Language step # 8 the error is;
Error:
The following error was generated when "$error.Clear();
                    $regPath='HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall';
                    $PackageGUIDRegEx = "{DEDFFB[0-9a-fA-F]{2}-42EC-4E26-[0-9a-fA-F]{4}-430E86DF378C}";
                    $InstallPath = (Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\ExchangeServer\v15\setup').MsiInstallPath;
                    if(test-path ($regPath))
                        Write-ExchangeSetupLog -info ("Removing " + $RoleLanguagePackType + " Language Packs.");
                        Get-ChildItem ($regPath) | foreach{
                            if($_ -match "(?<ProductCode>$PackageGUIDRegEx)") {
                                $langPackPackageCode = $matches['ProductCode'];
                                if($langPackPackageCode -ne $null -and $langPackPackageCode.Length -ne
0) {
                                    Write-ExchangeSetupLog -info ("Removing package
$langPackPackageCode");
                                    $language = $langPackPackageCode.Substring(20,4);
                                    $logFilePath = [IO.Path]::Combine($RoleLogFilePath,"Uninstall")
+ '.' + $language + '.' + "Client" + "." + $RoleLogDateTime + ".msilog";
                                    uninstall-MsiPackage -ProductCode ($langPackPackageCode)
-LogFile ($logFilePath);
                        Get-Childitem -Path $InstallPath -include "*.Localized.js","*.Localized.min.js" -recurse | foreach
($_) {remove-item $_.fullname};
                        Write-ExchangeSetupLog -info "Remove Language Packs completed.";
        " was run: "The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.".
I am also attaching the snapshots. Please guide me how to uninstall Exchange 2013. I had some issue with Exchange Server and it need to uninstall and re-install the Exchange Server.

        " was run: "The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.".
Hi,
Based on this error, possible cause may the path of language package is too long. Please check the following things:
Where is your language package installed? Please check it.
Under 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{DEDFFB[0-9a-fA-F]{2}-42EC-4E26-[0-9a-fA-F]{4}-430E86DF378C}", please check the following entries. By default, it should be like this.
InstallSource (Z:\Applications\Server\Exchange\2013\64-Bit\RTM\en\)
ModifyPath (MsiExec.exe /X{DEDFFB64-42EC-4E26-0409-430E86DF378C})
UninstallString MsiExec.exe /X{DEDFFB64-42EC-4E26-0409-430E86DF378C}
Under 'HKLM:\SOFTWARE\Microsoft\ExchangeServer\v15\setup, check this entry MsiInstallPath. By default, the value should be “C:\Program Files\Microsoft\Exchange Server\V15\”
Best Regartds.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Uninstall Exchange 2013 failed on step number 8 Languages

Dear All,
I am not able to uninstall exchange 2013. the process is failing on step 8 Languages. Please advise

Any one please guide how to uninstall Exchange 2013?
Thanks in advance

Uninstalling Exchange 2007 - Folder Replicas Error

I'm trying to remove Exchange 2007 which I was testing using our development system but have come across some errors during the uninstall process.
The error message I receive is something like this: Error: Uninstall cannot continue. Database "Public Folder Database": The public folder database "SERVER\Second Storage Group\Public Folder Database" contains folder replicas...
Now unfortunately i'm a) no exchange expert (i'm a .NET dev) and b) we dont use exchange for email - so I cant move folders to an alternative location.
All I want to do is remove the software without bringing the network down again (I didn't realise removing a mailbox from exchange 07 removed the user account as well!).
Thanks for your help,
Matt

Run the Get-PublicFolderStatistics cmdlet using the Exchange Management Shell and examine the output. If the folders listed are no longer required, you can remove them by piping the results of the Get-PublicFolderStatistics cmdlet into the Remove-PublicFolder
cmdlet:
Get-PublicFolderStatistics | Remove-PublicFolder
Once you've done this, re-run Get-PublicFolderStatistics and when no results are returned, you should find that this particular issue no longer prevents the uninstall of Exchange 2007.
I know this is an old post but I am at wits end....
This doesnt work for me, just get all of these errors
Regards Jake Gardner If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties
and confers no rights! Always test ANY suggestion in a test environment before implementing! Sorry if my grammar is incorrect as I am probably on writing to you from my phone.

Cannot uninstall Exchange 2013 - Cannot get ecp page too.

I am trying to install Exchange 2013 and we already have Exchange 2007 in our production environment.
Running the command get-exchangeserver |fl give the following. It shows IsCleintAccessServer : False, I am pretty sure I did select both the roles at the time of installation.
IsHubTransportServer            : True
IsClientAccessServer            : False
IsExchange2007OrLater           : True
IsEdgeServer                    : False
IsMailboxServer                 : True
IsE14OrLater                    : True
IsE15OrLater                    : True
IsProvisionedServer             : False
IsUnifiedMessagingServer        : True
IsFrontendTransportServer       : False
I can see all the virtual folders in IIS and while trying to access the ecp page using https://localhost:444/ecp?exchclientver=15, it says "Sorry! Access Denied".
Get-ecpvirtualdirectory gives no output.
If I try to uninstall I get the following error.
Error:
Uninstall can't continue. Database Mailbox Database 0424069483 : This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, public folder mailboxes or arbitration mailboxes. To get a list of all mailboxes in this database, run the
command Get-Mailbox -Database <Database ID>. To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of archive mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Archive.
To get a list of all public folder mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -PublicFolder. To get a list of all arbitration mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Arbitration.
To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID>. To disable an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -Archive.
To disable a public folder mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -PublicFolder. Arbitration mailboxes should be moved to another server; to do this, run the command New-MoveRequest <parameters>.
If this is the last server in the organization, run the command Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox. Mailbox plans should be moved to another server; to do this, run the command
Set-MailboxPlan <MailboxPlan ID> -Database <Database ID>. It was running the command 'Remove-MailboxDatabase 'CN=Mailbox Database 0424069483,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=XYZ,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=XYZ,DC=X,DC=X' -whatif'.
I would like to uninstall this server and do a fresh install. Tried recover option too, still facing same problem.
HELP!!!

Hi,
I suggest re-install CAS role for test whether it works.
If not, please uninstall the MBX role as what you want. I suggest make a full backup if there is any data in the Exchange server, then remove the mailbox database.
Found an article for your reference:
Cannot remove mailbox database
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.unwillingtoremovemailboxdatabase(v=exchg.150).aspx
After uninstall the Exchange server, I suggest double check whether there is anything leave in AD via ADSIEdit tool. Then re-install Exchange server.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange 2013 installation Problem on Hyper-V

Hello,
I have a very interesting problem Exchange 2013 installation step on Hyper-V.
I have 2 server. I installed on server Server 2012 R2 Standart. And then installed hyper-v role for both server.
I created virtual machine for first server and this virtual machine domain controller.
And then I created virtual machine for second server and this virtual machine Exchange 2013.
I installed all prequisites and exchange 2013 finished successfuly. When I opened https://server/ecp it give me http 500 internal error. I checked almost all forums but any recommendation didn't solve my problem.
And then I removed hyper-v role and installed vmware v11. and installed same applications like above.
Very interesting finished installation and opened ecp console. eveythink seen to good.!
Actualy I find problem.
There is exchange feature installation command on microsoft exchange prequisite. When ruunning this command installing two program on program and feature name is "c++ redistrubutable x64 and x32"
I must uninstall this programs before install unified communication api 4.0.
I cannot see on hyper-v when running this feature.
But I can see on vmware this features on programs and feature.
This is very absurt.
Anybody have an idea for this
Thank you for your clarify.

Hi,
Thanks for your reply.
I run this command before Exchange 2013 installation:
Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience,
NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering,
RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell,
Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, Web-Client-Auth,
Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging,
Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase,
Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression,
Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation
later run this code on vmware platform , installing 2 program in programs and feature. name is Visual
C++ Redistributable package x64 and x86. I know Unified Communications Managed API 4.0
install same program too. But I must unintall Visual C++ Redistributable package before
install Unified Communications Managed API 4.0. But My problem I cannot see this two program
in programs and feature on hyper-v platform.
I tried it many times.

Exchange 2007 server problems

Hello everyone,
I am having some trouble with our Exchange 2007.
Since some days ago I am having extrange troubles with out Exchange 2007 server. Users are been asked to write their user and password very oftenly, and I don't know the reason. Additionaly I have realised the OAB is not downloading properly in any Outlook
client. If I try to do it I am given an error number0x8004010F
I have been checking exhange server 2007 event viewer and I found a 80040115 error saying OALGen found an error accessing public folders while trying to generate OAL
Another error comes out inmediately after saying to check if Public folder store is mounted and there are replicas of Address Lists folders.
Another event viewer error says there was a problema trying to update availability information for the public folder in the virtual machine NAMESERVER
We have other 3 Exchange 2003 servers which I cannot remove because of an application we are using, accessing to them. As long as I know public flders are stored in Exchange 2007 server and not replicated in any other server, so I don't know if this has
something to do with the error.
Any idea of what might be going on?
Thank you very much.
Best regards,
David.

I know I'm not addressing your direct issue, but at this point you need to seriously be looking at removing all Exchange 2003 boxes. Exchange 2003 has left extended support:
http://blogs.technet.com/b/rmilne/archive/2013/10/08/save-the-date-end-of-exchange-2003-support-t-minus-6-months.aspx
What exactly is it with this app that causes it to lock on to 2003 only?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Uninstall Exchange contains replicas problem

Similar Messages

Maybe you are looking for