Uninstalling Exchange 2013 SP1 failed on Step 8 Lanugage

Hello,
I am trying to uninstall Exchange 2013 SP1 but it is failing while uninstalling Language step # 8 the error is;
Error:
The following error was generated when "$error.Clear();
                    $regPath='HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall';
                    $PackageGUIDRegEx = "{DEDFFB[0-9a-fA-F]{2}-42EC-4E26-[0-9a-fA-F]{4}-430E86DF378C}";
                    $InstallPath = (Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\ExchangeServer\v15\setup').MsiInstallPath;
                    if(test-path ($regPath))
                        Write-ExchangeSetupLog -info ("Removing " +  $RoleLanguagePackType + " Language Packs.");
                        Get-ChildItem ($regPath) | foreach{
                            if($_ -match "(?<ProductCode>$PackageGUIDRegEx)") {
                                $langPackPackageCode = $matches['ProductCode'];
                                if($langPackPackageCode -ne $null -and $langPackPackageCode.Length -ne
0) {
                                    Write-ExchangeSetupLog -info ("Removing package
$langPackPackageCode");
                                    $language = $langPackPackageCode.Substring(20,4);
                                    $logFilePath = [IO.Path]::Combine($RoleLogFilePath,"Uninstall")
+ '.' + $language + '.' + "Client" + "." + $RoleLogDateTime + ".msilog";
                                    uninstall-MsiPackage -ProductCode ($langPackPackageCode)
-LogFile ($logFilePath);
                        Get-Childitem -Path $InstallPath -include "*.Localized.js","*.Localized.min.js" -recurse | foreach
($_) {remove-item $_.fullname};
                        Write-ExchangeSetupLog -info "Remove Language Packs completed.";
        " was run: "The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.".
I am also attaching the snapshots. Please guide me how to uninstall Exchange 2013. I had some issue with Exchange Server and it need to uninstall and re-install the Exchange Server.

        " was run: "The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.".
Hi,
Based on this error, possible cause may the path of language package is too long. Please check the following things:
Where is your language package installed? Please check it.
Under 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{DEDFFB[0-9a-fA-F]{2}-42EC-4E26-[0-9a-fA-F]{4}-430E86DF378C}", please check the following entries. By default, it should be like this.
InstallSource (Z:\Applications\Server\Exchange\2013\64-Bit\RTM\en\)
ModifyPath (MsiExec.exe /X{DEDFFB64-42EC-4E26-0409-430E86DF378C})
UninstallString MsiExec.exe /X{DEDFFB64-42EC-4E26-0409-430E86DF378C}
Under 'HKLM:\SOFTWARE\Microsoft\ExchangeServer\v15\setup, check this entry MsiInstallPath. By default, the value should be “C:\Program Files\Microsoft\Exchange Server\V15\”
Best Regartds.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Similar Messages

  • Uninstall Exchange 2013 failed on step number 8 Languages

    Dear All,
    I am not able to uninstall exchange 2013. the process is failing on step 8 Languages. Please advise

    Any one please guide how to uninstall Exchange 2013?
    Thanks in advance

  • Exchange 2013 SP1 - The attempt to search the administrator audit log failed.

    During migration process from Exchange 2010 to 2013, after moving Arbitration mailbox from Exchange 2010 database to Exchange 2013 SP1 database, cmdlet Search-AdminAuditLog fails with following error.
    The attempt to search the administrator audit log failed. Please try again later.
    + CategoryInfo : NotSpecified: (:) [Search-AdminAuditLog], AdminAuditLogSearchException
    + FullyQualifiedErrorId : [Server=EX2013,RequestId=517873e3-a623-4363-bfdc-e5aa23595c33,TimeStamp=29. 4. 2014
    8:38:37] [FailureCategory=Cmdlet-AdminAuditLogSearchException] 2774D0CF,Microsoft.Exchange.Management.SystemConfig
    urationTasks.SearchAdminAuditLog
    + PSComputerName : ex2013.domainname.local

    Hi,
    First, please make sure the Microsoft Exchange Search and the Microsoft Exchange Search Host Controller service are running and please run the get-mailbox -arbitration cmdlet to check the result.
    Besides, please check the properties of the DiscoverySearchMailbox and verify that the homeMDB attribute is set to a mounted database.
    If the steps above don't work, please try to re-create a new Discovery System Mailbox to check the result. You can refer to the following article.
    Re-Create the Discovery System Mailbox
    http://technet.microsoft.com/en-gb/library/gg588318(v=exchg.150).aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Upgrade of Integation Services (Windows 2012 R2) on Windows 2008 R2 with Exchange 2013 SP1 DAG fails

    Here is the scenario:
    Legacy Host: Windows 2008 R2
    Guest VM: Windows 2008 R2 with Exchange 2013 SP1 DAG cluster.
    After importing the VM (2008 R2 and Exchange 2013 DAG) into a 2012 R2 host (Cluster).  (copy VM files to new 2012 R2host) Everything works fine.
    Then upgrading "Installation Services" (for Windows 2012 R2 host) on the imported VM runs fine with no errors to the "Restart" prompt. VM than shows: "Configuring Windows updates 32% complete. Do not turn
    of your computer." Hangs there for about 20 minutes until is says "shutting down". Hangs there for 20 minutes until power off. Restart to normal start; "Preparing to configure Windows. Do not turnoff your computer." proceeds slowly
    to "Configuring Windows updates 32% complete. Do not turn of your computer." hangs there again indefinite. Sometime hangs at shutdown cycle and "Configuring Windows updates 32% complete. Do not turn of your computer." indefinitely.
    I moved 20 other machines from a 2008 R2 host to new Windows 2012 R2 hosts all of these machines install the 2012 R2 Integration services just fine on the 2008 R2 VM. Just the 2008 R2 VMs clustered (DAG) and Exchange 2013 SP1 do not take the Integration
    Services upgrade.
    Any advise from Microsoft? I know I could decommission the DAG and Exchange machines and install Integration services on the native box before Exchange and DAG and that would sure work, but I'd rather avoid that amount of work for a simple integration layer
    upgrade.
    Thanks
    Gerhard Waterkamp ACSLA Inc.

    Hi,
    Could you try use the following method to fix this issue first?
    1. Run the System Update Readiness Tool, then check if there is any error in the Checksur.log and checksur.persist.log.
     1. Please run the System Update Readiness Tool on this affected server. Please download this tool from the following Microsoft article:
     Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7
     http://support.microsoft.com/kb/947821/en-us
    2. The System Update Readiness Tool creates the log files that captures any issues that the tool found or fixed. The log files are located at the following location:
    %SYSTEMROOT%\Logs\CBS\
    3. Please paste the checksur.log here for analysis.
    If there is no error found, please try the following step.
    ==================================
    2. Use Fix it tool to reset the Windows Update components.
     1. Open the following link.
     http://support.microsoft.com/kb/971058/en-nz
     2. Select Windows 8.1, Windows 8 and Windows 7 in the product selection box.
     3. Click “Run Now” to reset the Windows Update components.
    Note: We can reset the Windows Updates manually by following the steps in the KB above.
    3. Use the System File Checker tool to repair missing or corrupted system files
     1. Open the command promote with Administrators.
     2. At the command prompt, type the following command, and then press ENTER:
         sfc /scannow
    Any errors are found in the steps above, please let me know.
    Hope this helpful.
    Best Regards,
    Jason Zeng
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Exchange 2013 SP1 readiness check failing

    Trying to install our first Exchange 2013 SP1 server on Windows 2012 R2 in our datacentre, the readiness check fails with:
    Error:
    The Active Directory schema isn't up-to-date, and this user account isn't a member of the 'Schema Admins' and/or 'Enterprise Admins' groups.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.SchemaUpdateRequired.aspx
    There are many more errors relating to Enterprise admin rights etc.
    Please note that:
    My account is Domain admin, Schema admin and Enterprise admin member, it always has been.
    I tried the built-in AD Administrator which of course is part of the groups as well, no difference.
    Active Directory is at 2008 R2 for domain and forest functional levels.
    I tried rejoining the new Exchange designated server to the domain
    I've installed RSAT-ADDS, the Managed API 4.0 and all the other windows roles via powershell
    There is a local domain controller that is a global catalog server on the new Exchange server subnet
    I tried running the Exchange Setup on a different server on the same subnet as where the active 2010 Exchange server resides as well as the FSMO AD role holder resides, this works fine. I even did the AD prep from there no problem, that made no difference
    on the datacentre server
    AD replicates fine between the FSMO role holder and the Datacentre (no errors in dcdiag or repadmin /showrepl)
    This error is in the event log:
    The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    ExSetupUI.exe
    6724
    Get Servers for domain.local
    TopologyClientTcpEndpoint (localhost)
    3
    System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0475315. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
    at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
    at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    --- End of inner exception stack trace ---
    Server stack trace:
    at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
    at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
    at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
    at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
    at System.ServiceModel.ICommunicationObject.Open()
    at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
    at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
    the message resource is present but the message is not found in the string/message table

    So I decided to re-install the OS, worked perfectly now. Only difference from before would be:
    SCCM hasn't pushed SCEP 2012 to the new build of the same server yet
    The original server was installed in a different AD site and then it was physically mode and reassigned to an new AD site and subnet
    I might have installed the pre-reqs in a slightly different order (RSAT-ADDS, all the IIS etc things via powershell
    and then the UCM API 4.0. (saw few comments that the order of how you install them matters in other forums).
    10 or so Microsoft Windows updates haven't installed on the new OS build yet.
    Other than that, its identical. But if its not broken don't fix it, perhaps the above can help someone else though. 

  • SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

    SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
    Error:
    The following error was generated when "$error.Clear();
              $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
              $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
              if ($be -eq $null)
              new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
              . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
            " was run: "The virtual directory 'ecp' already exists under 'server/name'.
    Parameter name: VirtualDirectoryName".
    Error:
    The following error was generated when "$error.Clear();
              $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
              $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
              if ($be -eq $null)
              new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
              . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
            " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
    Error:
    The following error was generated when "$error.Clear();
              $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
              $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
              if ($be -eq $null)
              new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
              set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
              . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
            " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
    !! And now transport service won't start and mail is unavailable !!
    Any help would be appreciated.
    I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

    Hi,
    Thanks for your response.
    From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange 2013 SP1: Fix for failing MSExchangeTransport service

    We had a newly updated Exchange 2013 SP1 that would not start the Transport service
    "Netstat -b" showed that a service was listening to port 25 on all IP's (0.0.0.0:25) and when the service could not get the port, it would die, and Exchange would attempt to restart it over and over.
    After many tears, I found this solution: 
    Through the console or the ECP, check the Frontend receive connectors and find the one that is listening on 0.0.0.0:25, which is probably the Default Frontend Receive.  Disable it.
    Restart the MSExchangeTransport and MSExchangeTransportFrontEnd services.
    If both services restart normally, troubleshooting is complete.
    We use several custom connectors carried forward from the previous installation, which was SBS 2008.  If this applies to you, take notice.

    Normally, the Default Frontend Receive Connector (0.0.0.0:25) is the messaging entry point for your organization (I am assuming that you have a single MBX/CAS server).
    1. If you disable the Default Frontend Receive Connector (0.0.0.0:25), you block inbound email.
    2. Most probably, the cause for your problem are the Custom Receive Connectors. Check their type, and if it is Hub Transport, delete and re-create them as Front End Receive connectors.
    Step by Step Screencasts and Video Tutorials

  • Exchange 2013 SP1 - healthsets failing

    Hi,
    I have recently installed two Exchange 2013 SP1 servers in different environments and are experiencing issues on both. Issues that I haven't seen on Exchange 2013 without SP1.
    I have 6 healthsets which are unhealthy. 
    Autodiscover...
    ActiveSync.P...
    EWS.Proxy
    OAB.Proxy
    Outlook.Proxy
    OutlookMapiH...
    I found this article: 
    http://technet.microsoft.com/en-us/library/ms.exch.scom.ecp.proxy(v=exchg.150).aspx
    Which describes, that try to restart the app pool, then an iisreset - and lastly reboot the server. Tried all and none of them helped.
    But then I found this error in the Exchang event log:
    RecycleApplicationPool-MSExchangePowerShellAppPool-RpsDeepTestPSProxyRestart: Throttling rejected the operation
    Which fails almost every minute.
    And I guess that this could be the issue. But I can't figure out which throttling that is causing this.
    Any one else with this issue on Exchange 2013 SP1?
    Thanks in advance.
    /Kim

    Hi,
    I have seen a lot of similar issues with health manager service. For IIS services, we can safely ignore these warnings. Personal experience, we just need to monitor whether there are related
    error reports in event log.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Upgrade of Exchange 2013 SP1 Reboots Server During Step 3 "Copy Exchange Files"

    While upgrading Exchange 2013 to the new SP1, the installer reaches step 3, "Copying Exchange Files", sits at 0% for 10-15 minutes and then when without warning the machine will reboot.
    The last couple logs from ExchangeSetup.log are:
    [02/28/2014 00:16:58.0878] [1] Installing MSI package 'C:\Exchange2013SP1\exchangeserver.msi'.
    [02/28/2014 00:16:58.0878] [1] No updates directory was specified for the msi installation.
    [02/28/2014 00:16:58.0878] [1] Installing a new product. Package: C:\Exchange2013SP1\exchangeserver.msi. Property values: DISABLEERRORREPORTING=1 PRODUCTLANGUAGELCID=1033 DEFAULTLANGUAGENAME=ENU DEFAULTLANGUAGELCID=1033 INSTALLCOMMENT="Installed language
    for this product: English (United States)" REBOOT=ReallySuppress TARGETDIR="C:\Program Files\Microsoft\Exchange Server\V15" ADDLOCAL=Bridgehead,FrontendTransport,ClientAccess,UnifiedMessaging,Mailbox,AdminTools,Cafe,AdminToolsNonGateway

    Hi,
    Where did you download the install package?
    Please download the Exchange 2013 SP1 from the following link and install again:
    Microsoft Exchange Server 2013 Service Pack 1 (SP1)
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Exchange 2013 SP1 setup fails at prerequisite Analysis

    I installed a completely new server network with Hyper-v 2012R2
    I installed two virtual 2012R2 servers: DC01 as the Domain Controller of "testdomain.local" and EX01 as the Exchange server.
    EX01 is joined the domain "testdomain" from DC01
    I log in on EX01 with an in AD created testdomain\exadmin account who is member of domain admins, enterprise admins, schema admins, administrators and group policy creator owners.
    I have run the command Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience,
    NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing,
    Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression,
    Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation, Telnet-Client, RSAT-ADDS
    on EX01
    I have installed the Microsoft Unified Communications Managed API 4.0
    Then I run the Exchange 2013 SP1 setup and the prerequisite check gives the following errors:
    Error:
    You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
    Error:
    You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
    Error:
    Setup encountered a problem while validating the state of Active Directory: Active Directory server  is not available. Error message: Active directory response: The LDAP server is unavailable.  See the Exchange setup log for more information on this
    error.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
    Error:
    Either Active Directory doesn't exist, or it can't be contacted.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
    I can connect with the Active Directory Sites and Domains and other applets to the AD. So Why these errors???
    HELP!
    Regards, Manu
    Manu van Winkel

    Hi, thanks for the answer.
    I restarted the server and did the "run as administrator": same result.
    The first errormessage in the exchangesetup.log is:
    [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server  is not available. Error message: Active directory response: The LDAP server is unavailable.  See the Exchange setup log for more information
    on this error.
    When I run dcdiag /s:DC01 from EX01 it passes all tests except:
    DFSREvent "The RPC server is unavailable"
    KccEvent "The RPC server is unavailable."
    SystemLog  "The RPC server is unavailable."
    Could these be of any influence?
    Running dcdiag on DC01 passes all tests.
    The only thing I changed after setting up DC01, was changing the fixed IP-adres from 192.168.25.3 to 192.168.25.2, but I ran ipconfig /flushdns and ipconfig /registerdns and dcdiag /fix afterwards.
    The only roles installed on DC01 are AD DS (I tried installing exchange before and after adding the AD DS role), AD, DNS, DHCP and Fileservices
    I don't know where to look anymore....
    Manu van Winkel

  • Seemingly successful install of Exchange 2013 SP1 turns into many errors in event logs after upgrade to CU7

    I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server. 
    I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online). 
    I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me). 
    Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
    Issue 1)
    After each reboot I get a Kernel-EventTracing 2 error.  I cannot find anything on this on the internet so I have no idea what it is.
    Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
    I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
    Issue 2)
    I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
    https://support.microsoft.com/kb/2870416?wa=wsignin1.0
    One of the perf counters fails to register using the script from the link above.
    66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
    New-PerfCounters : The performance counter definition file is invalid.
    At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
    +    New-PerfCounters -DefinitionFileName $f
    +    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo         
    : InvalidData: (:) [New-PerfCounters], TaskException
        + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
       12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
    But that one seems unrelated to the ones that still throw errors. 
    Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
    Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
    exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
    is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
    The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Issue 3)
    I appear to have some issues related to the healthmailboxes. 
    I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
    SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
    lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
    I reran setup /prepareAD to try and remedy this but I am still getting some.
    Issue 4)
    I am getting an MSExchange RBAC 74 error. 
    (Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
    Issue 5)
    I am getting MSExchange Assistants 9042 warnings on both databases.
    Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
    skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
    Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server. 
    If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
    Issue 6)
    At boot I am getting an MSExchange ActiveSync warning 1033
    The setting SupportedIPMTypes in the Web.Config file was missing. 
    Using default value of System.Collections.Generic.List`1[System.String].
    I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

    Hi Eric
    Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time. 
    I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
    I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”. 
    If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
     So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering. 
    Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users. 
    I then applied an address policy to them and gave it the highest priority. 
    Then I set a default email address policy for the entire organization. 
    After reinstalling Exchange all of my system mailboxes were created with the internal domain name. 
    So issue number 3 above has not come up. 
    For issue number one above I have created a new thread:
    https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
    For issue number four I have posted to this existing thread where there is so far no resolution:
    https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
    Issue number Five I have managed to recreate and get rid of in more than one way. 
    If I create a new database in ECP and set the database and log paths where I want, then this error will appear. 
    If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear. 
    The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service. 
    If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away. 
    So my off hand guess is that these are caused by orphaned system mailboxes.
    For issue number six I have posted to this existing thread where there is so far no resolution:
    https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
    So for the remainder of this thread we can try and tackle issue number two which is the perf counters. 
    The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7. 
    Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five. 
    Using all of your suggestions so far has not removed these 5 remaining errors either.  Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
    to make them go away if possible.

  • Exchange 2013 SP1 | Another HTTP 500.0.0 Error

    Help!
    We are in the middle of migrating from Exchange 2010 SP3 to Exchange 2013 SP1 and we are being plagued with HTTP 500 errors on every Exchange 2013 server now.
    I have two Client Access servers installed (EXCHFE01 & EXCHFE02) and one backend mailbox server (EXCHMB03) with the Client Access role also installed (for troubleshooting purposes). Once I get everything working I'll install two backend 2013 servers
    with the mailbox role only for production (load-balanced, clustered, etc). I still have two Exchange 2010 mailbox servers left since one has a single large mailbox left on it and the other hosts public folders. I'll get to migrating those later. All Exchange
    2013 servers are running Windows Server 2012. All are on the same LAN and no firewalls are between them.
    On all three 2013 servers (EXCHFE01, EXCHFE02, EXCHMB03) I'm getting the dreaded HTTP 500 error whether I try to get to OWA or ECP. This did work at one point where I could at least login to the mailbox server (EXCHMB03) and migrate all my mailboxes over
    to it. Sometime this morning after the two Client Access servers were installed the mailbox server stopped working (HTTP 500 errors). This is very frustrating because I can't even login to a console to manage Exchange from any server at this point.
    Both Client Access servers aren't really showing anything of value in the event logs or the IIS logs. The mailbox server (EXCHMB03) does show the following event 3002:
    Protocol /Microsoft-Server-ActiveSync failed to process request from identity NT AUTHORITY\SYSTEM. Exception: Microsoft.Exchange.Security.Authentication.BackendRehydrationException: Rehydration failed. Reason: Source server 'NT AUTHORITY\SYSTEM' does not have token serialization permission.
    at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.ProcessRequest(HttpContext httpContext)
    at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.OnAuthenticateRequest(Object source, EventArgs args).
    ...and I get the following when I run the Exchange Management Shell tool on the same mailbox server (along with lots of other red HTML text):
    More Information:
    This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
    The Client Access servers show the following errors:
    Performance counter updating error. Counter name is Location cache update time, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
    at System.Diagnostics.PerformanceCounter.InitializeImpl()
    at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
    at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 4040 is not running.
    at System.Diagnostics.Process.GetProcessById(Int32 processId)
    at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Processes running while Performance counter failed to update:
    888 svchost
    264 smss
    532 conhost
    2576 Microsoft.Exchange.UM.CallRouter
    1596 WMSvc
    3932 dllhost
    4020 svchost
    2308 dwm
    5060 taskhostex
    844 svchost
    1972 Microsoft.Exchange.Directory.TopologyService
    1228 inetinfo
    1316 vmtoolsd
    3896 svchost
    780 svchost
    1580 rundll32
    1668 mqsvc
    816 dwm
    3840 slui
    3532 rdpclip
    3980 WmiPrvSE
    4200 SppExtComObj
    4288 winlogon
    2140 SMSvcHost
    676 svchost
    1564 svchost
    1296 Microsoft.Exchange.Diagnostics.Service
    1472 Microsoft.Exchange.ServiceHost
    1204 svchost
    1292 ServerManagerLauncher
    488 winlogon
    664 svchost
    572 lsass
    3236 dllhost
    2972 WmiPrvSE
    4484 w3wp
    388 csrss
    1600 rundll32
    564 services
    1260 msdtc
    5032 sppsvc
    1448 MSExchangeHMHost
    824 LogonUI
    4204 VSSVC
    2524 userinit
    2700 MSExchangeFrontendTransport
    1708 SMSvcHost
    728 svchost
    460 wininit
    904 svchost
    992 svchost
    4996 TSTheme
    4240 slui
    4904 taskhost
    452 csrss
    4340 csrss
    4 System
    1164 spoolsv
    1988 slClient
    2760 MSExchangeHMWorker
    0 Idle
    Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2
    at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)
    at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
    at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
    ... and...
    A transient failure has occurred. The problem may resolve itself. Diagnostic information:
    Microsoft.Exchange.Data.DataSourceOperationException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
    at System.Net.HttpWebRequest.GetResponse()
    at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
    at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
    --- End of inner exception stack trace ---
    at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
    at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
    at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalFindFolders(IEnumerable`1 parentFolderIds, SearchFilter searchFilter, FolderView view, ServiceErrorHandling errorHandlingMode)
    at Microsoft.Exchange.WebServices.Data.ExchangeService.FindFolders(FolderId parentFolderId, SearchFilter searchFilter, FolderView view)
    at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
    --- End of inner exception stack trace ---
    at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
    at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.GetOrCreateFolderCore(String folderName, FolderId parentFolder, Func`1 creator)
    at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.GetDefaultFolder()
    at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<>c__DisplayClass1b`1.<InternalFindPaged>b__13()
    at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
    at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<InternalFindPaged>d__21`1.MoveNext()
    at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.<GetNotificationDetails>d__4.MoveNext()
    at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
    at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.RemoveAllNotification()
    at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.UpdateDataInMbx(List`1 certificates)
    at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.Work()
    I've tried all sorts of recommended fixes but none have worked so far:
    ADSIEdit and remove msExchCanaryData0 data
    Reinstall Exchange multiple times
    Rebooted multiple times
    This article: http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
    Rebooted DCs multiple times (no exchange servers are DCs)
    I'm sure I've left out a few troubleshooting steps since I've been working at this for two days. Can anybody offer any advice? I'm at my wits end here...

    Hi,
    Please check whether the mail.mydomain.com is pointed to your Exchange 2010 or Exchange 2013. Please run the following command to check your OWA virtual directores and ECP virtual directories:
    Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
    Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
    In IIS manager > Default Web Site, please make sure Anonymous Authentication is Enabled in Authentication. Confirm that "Require SSL" is checked on the SSL Settings of the default web site.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Exchange 2013 SP1 Not Receiving e-mail

    Hello,
    Mail flow between Exchange 2010 sp3 & Exchange 2013 SP1 (update Cu5) not working.
    Exchange 2013 setup is Exchange 2013 sp1 DVD
    Exchange 2010 when sending mail to external it's ok.
    Exchange 2010 when sending mail to exchange 2010 users it's ok.
    Exchange 2013 when sending mail to External it's ok.
    Exchange 2013 when sending mail to exchange 2010 users it's ok.
    or
    Exchange 2010 when sending mail to exchange 2013 not working
    Exchange 2013 when sending mail to Exchange 2013 not working
    From internet --> SMTP GW (exh edge) --> Exchange 2010 it's ok
    From Internet --> SMTP GW (exh edge) --> Exchange 2013 not working.
    organization;
    1 AD site and 1 PDC (2012 R2) + 3 DC (1x 2008 R2 + 2 x 2003 Server) (Windows Server 2003 domain fl)
    With Exchange 2010 exchange 2013 on the same subnet. Exchange 2010 physical machine, Exchange 2013 physical machine ( eth Microsoft Team Server 2012 R2 )
    All server is region setting Turkey
    Exchange 2010 error
    451 4.7.0 Temporary server error. Please try again later. PRX4 
    Exchange 2013 error
    451 4.4.0 primary target ip address responded with 501 5.5.4 Invalid arguments. attempted failover to alternative host, but that did not succeed. either there are no alternate host, or delivery failed to all alternate hosts. Th
    thanks

    Hi,
    From your description, the Exchange 2013 server can't receive emails internally and externally. I recommend you follow the steps below for troubleshooting:
    1. Please restart the Microsoft Exchange Frontend Transport service on CAS and the Microsoft Exchange Transport service on Mailbox and check the result.
    2. Please make sure that the authentication on default receive connector is right. Here is the configuration in my environment for your reference:
    Hope it helps.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Error when upgrading to exchange 2013 SP1

    * First, I install Exchange 2013 SP1 on my server, so step 14 of 18 to 100% then alert error:
    =======================
    Error:
    The following error was generated when "$error.Clear();
              $name = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxUniqueName;
              $dispname = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxDisplayName;
              $dismbx = get-mailbox -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1;
              if( $dismbx -ne $null)
              $srvname = $dismbx.ServerName;
              if( $dismbx.Database -ne $null -and $RoleFqdnOrName -like "$srvname.*" )
              Write-ExchangeSetupLog -info "Setup DiscoverySearchMailbox Permission.";
              $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
              if( $mountedMdb -eq $null )
              Write-ExchangeSetupLog -info "Mounting database before stamp DiscoverySearchMailbox Permission...";
              mount-database $dismbx.Database;
              $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
              if( $mountedMdb -ne $null )
              $dmRoleGroupGuid = [Microsoft.Exchange.Data.Directory.Management.RoleGroup]::DiscoveryManagement_InitInfo.WellKnownGuid;
              $dmRoleGroup = Get-RoleGroup -Identity $dmRoleGroupGuid -DomainController $RoleDomainController -ErrorAction:SilentlyContinue;
              if( $dmRoleGroup -ne $null )
                trap [Exception]
                  Add-MailboxPermission $dismbx -User $dmRoleGroup.Name -AccessRights FullAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
                  continue;
                Add-MailboxPermission $dismbx -User $dmRoleGroup.Identity -AccessRights FullAccess -DomainController $RoleDomainController -WarningAction SilentlyContinue;
            " was run: "Failed to mount database "Mailbox Database 0487331505". Error: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing:
    Unable to mount database. (hr=0x80004005, ec=-543)
    Diagnostic context:
        Lid: 65256  
        Lid: 10722   StoreEc: 0xFFFFFDE1
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 45120   dwParam: 0x667F9F
        Lid: 57728   dwParam: 0x668155
        Lid: 46144   dwParam: 0x66851E
        Lid: 34880   dwParam: 0x66851E
        Lid: 34760   StoreEc: 0xFFFFFDE1
        Lid: 41344   Guid: 581e05de-0b68-45e0-af85-c1d96eb3e939
        Lid: 35200   dwParam: 0x548
        Lid: 46144   dwParam: 0x66885A
        Lid: 34880   dwParam: 0x66885A
        Lid: 56264   StoreEc: 0x1388    
        Lid: 46280   StoreEc: 0xFFFFFDE1
        Lid: 1750    ---- Remote Context End ----
        Lid: 1047    StoreEc: 0xFFFFFDE1 [Database: Mailbox Database 0487331505, Server: ex2013.dothanhauto.com]".
    ========================
    * After I run install Exchange 2013 SP1 again, so go to step 5 of 9 then alert error.
    * Now, my Exchange 2013 not run. So bad. Please help me fix it! Thank you so much!

    * Thank you, Amit Tank, i passed step 4 of 9, but to step 5 of 9 then alert error:
    Error:
    The following error was generated when "$error.Clear();
              $name = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxUniqueName;
              $dispname = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxDisplayName;
              $dismbx = get-mailbox -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1;
              if( $dismbx -ne $null)
              $srvname = $dismbx.ServerName;
              if( $dismbx.Database -ne $null -and $RoleFqdnOrName -like "$srvname.*" )
              Write-ExchangeSetupLog -info "Setup DiscoverySearchMailbox Permission.";
              $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
              if( $mountedMdb -eq $null )
              Write-ExchangeSetupLog -info "Mounting database before stamp DiscoverySearchMailbox Permission...";
              mount-database $dismbx.Database;
              $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
              if( $mountedMdb -ne $null )
              $dmRoleGroupGuid = [Microsoft.Exchange.Data.Directory.Management.RoleGroup]::DiscoveryManagement_InitInfo.WellKnownGuid;
              $dmRoleGroup = Get-RoleGroup -Identity $dmRoleGroupGuid -DomainController $RoleDomainController -ErrorAction:SilentlyContinue;
              if( $dmRoleGroup -ne $null )
                trap [Exception]
                  Add-MailboxPermission $dismbx -User $dmRoleGroup.Name -AccessRights FullAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
                  continue;
                Add-MailboxPermission $dismbx -User $dmRoleGroup.Identity -AccessRights FullAccess -DomainController $RoleDomainController -WarningAction SilentlyContinue;
            " was run: "Failed to mount database "Mailbox Database 0487331505". Error: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing:
    Unable to mount database. (hr=0x80004005, ec=-543)
    Diagnostic context:
        Lid: 65256  
        Lid: 10722   StoreEc: 0xFFFFFDE1
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 45120   dwParam: 0x35AF49
        Lid: 57728   dwParam: 0x35B062
        Lid: 46144   dwParam: 0x35B3EC
        Lid: 34880   dwParam: 0x35B3EC
        Lid: 34760   StoreEc: 0xFFFFFDE1
        Lid: 41344   Guid: 581e05de-0b68-45e0-af85-c1d96eb3e939
        Lid: 35200   dwParam: 0x1BA0
        Lid: 46144   dwParam: 0x35B757
        Lid: 34880   dwParam: 0x35B757
        Lid: 56264   StoreEc: 0x1388    
        Lid: 46280   StoreEc: 0xFFFFFDE1
        Lid: 1750    ---- Remote Context End ----
        Lid: 1047    StoreEc: 0xFFFFFDE1 [Database: Mailbox Database 0487331505, Server: ex2013.dothanhauto.com]".
    * Please can you help me?! Thank you so much.

  • SME 7.1 not working with Exchange 2013 SP1 CU6

    Hello, i tried upgrading to SME 7.1 on our Exchange 2013 SP1 CU6, but when trying to configure the Exchange Server in the SME management console using the configuration wizard, it gave an error before the LUN mapping page, saying "Failed to get Exchange information for server" and "The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.". I upgraded Snapdrive to 7.1, verfied all credentials according to the manuals, re-installed and rebooted multiple times (registry and filesystem cleaned, even tried to rename the existing SnapInfo directory, ...), stopped all other services on the server but without any change... Every time when trying to run the configuration wizard, the debug log shows no errors, lists all Exchange information and ends with the following lines:[11/18 12:51:58 155] Exit CSmeCDOExm::GetExchangeStructureInternal 0x0
    [11/18 12:51:58 155] Exit CNtapSnapMgr::GetExchangeStructure: 0x0
    [11/18 12:51:58 233] Enter CSmeServerBase::~CSmeServerBase ...
    [11/18 12:51:58 248] m_ptrSnapShot released
    [11/18 12:51:58 248] m_pISnapShot4 released
    [11/18 12:51:58 248] m_pISnapShot5 released
    [11/18 12:51:58 248] m_pISnapShot6 released
    [11/18 12:51:58 248] m_pISnapShot7 released
    [11/18 12:51:58 248] m_pISnapShot8 released
    [11/18 12:51:58 248] m_pISnapShot9 released I ended up uninstalling SME 7.1 and re-installed SME 7.0 which is working. Exchange Server: ESXi 5.5 VM, Windows Server 2012 R2 (with current patches), Exchange 2013 SP1 CU6 - no DAG, single server installation (in co-existence with Exchange 2010), 4 iSCSI LUNs created with Snapdrive (1x Log, 3x Store), System drive and Exchange installation drive on vmdk Disks (via ESXi -> NFS store on the same NetApp)NetApp: FAS 2240-2 with Data ONTAP 8.1.4P1 7-mode (with complete license bundle) Anyone else got this problem or even better - a solution? 

    We could not reproduce the error with the upgrade workflow.Looking at the error and the relevant function, we could force the problem in following conditions: -SME is configured or ran at the DAG level-one of the following services is stopped or not responding on one nodes of the DAG Snapdrive Service, Snapmanager Service, Snapdrive Storage Management Service,Snapdrive Management Service. Would be good if we could get the output of following powershell cmdlet before and after the upgrade: Get-Service –ComputerName Node1, Node2, Node3 –name Snap*, SDMGMT*, SWSvc  Best regards,Dan 

Maybe you are looking for

  • Which is better, faster processor or more ram?

    Hello all! I'm planning on upgrading from my 1.33Ghz g4 ibook with 512mb of ram to a new macbook, because Logic Express 7 and Final Cut Express 3.5 don't run very well on my current system. Because of money constraints, I'm limited in what features I

  • Drag and Drop between Web Dynpro Tables on Cell Basis

    Hi Experts, I need to develop a Drag and Drop Functionality as follows: I have two tables. I want to drag a row of the first table and drop it in a particular cell of the second table. Is it possible to implement this using the Web Dynpro Drap and Dr

  • HTML to PDF creation

    Hi, I dont know whether this is the right place to ask my question , So Please direct me . In our application we need to convert HTML string to as a PDF document. Our client suggested try in Adobe Acrobat SDK , so i have started exploring in SDK but

  • Interface Trouble?

    Hi I have a 2950 switch. 24 port. IOS is c2950-i6q4l2-mz.121-6.EA2.bin Seems to be working OK but the unused and unconnected ports report as follows; FastEthernet0/11 is up, line protocol is down Hardware is Fast Ethernet, address is 0007.85bf.be8b (

  • Various scenario

    Dear Experts, what is the difference between these different scenarios Pls. explain it so that a beginner can understand it. The classic scenario The extended classic scenario The decoupled scenario The standalone scenario Kindly Regards Marco M