Uninstall Microsoft Office 2010 using intune

Has anyone successfully uninstalled Office 2010 using Intune to push the command?
I just upgraded all users to 2013 but would like to remove the old office.
Thanks
Ivan Nix

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support if the issue still exists.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

Uninstall Microsoft Office 2013 using Invoke-TroubleshootingPack

Hi,
I'm deploying an uninstallation package to uninstall Office 2013 using the ingenious Microsoft Fix it (located here: http://support.microsoft.com/kb/2739501/en-us)
called O15CTRRemove.
When running it manually, it removes everything that is related to Microsoft Office 2013 and I am able to install a new Office 2013 without any problems (changing from Office 365 to VL).
The problem is as follows:
I need to do this silently on a lot of computers using a deployment tool. I figured out how to use powershell and I'm doing it in the following way:
Import-Module TroubleshootingPack
$DIAGOFFRemoveOff2013 = Get-TroubleshootingPack -Path "C:\Deployment\Office2013Uninstall\O15CTRRemove"
Invoke-TroubleshootingPack -Pack $DIAGOFFRemoveOff2013 -AnswerFile "C:\Deployment\Office2013Uninstall\DIAG_Off_RemoveOff2013.xml" -unattended
I created the Answerfile DIAG_Off_RemoveOff2013.xml in the following way (according tohttp://blogs.technet.com/b/heyscriptingguy/archive/2011/02/09/use-powershell-troubleshooting-packs-to-diagnose-remote-problems.aspx):
Get-TroubleshootingPack "C:\Deployment\Office2013Uninstall\O15CTRRemove" -answerfile "C:\Deployment\Office2013Uninstall\DIAG_Off_RemoveOff2013.xml"
It looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Answers Version="1.0" />
When I run the script it works but for some reason, it doesn't work when I run it as system (my deployment tool runs the script as system, and I've tried it manually like this):
psexec -i -s cmd
cmd /C powershell -executionpolicy unrestricted -file "C:\Deployment\Office2013Uninstall\Uninstall_Office2013.ps1"
It just hangs and I can see in eventviewer that it has run a few troubleshooting packs, that the uninstall of Office is complete but it doesn't continue until I force kill sdiagnhost.exe.
If I run the script after killing sdiagnhost.exe, it finishes without a problem.
I have temporarily solved it like this (I run the same job twice, to be sure everything is removed and the second one finishes quickly while the first hangs until the timeout):
Start-Job -ArgumentList -ScriptBlock {
$DIR = "C:\Deployment\Office2013Uninstall"
Import-Module TroubleshootingPack
$DIAGOFFRemoveOff2013 = Get-TroubleshootingPack -Path "${DIR}\O15CTRRemove"
Invoke-TroubleshootingPack -Pack $DIAGOFFRemoveOff2013 -AnswerFile "${DIR}\DIAG_Off_RemoveOff2013.xml" -unattended
Get-Job | Wait-Job -Timeout 1200
Get-Job | Receive-Job
Get-Job | Remove-Job -Force
Start-Job -ArgumentList -ScriptBlock {
$DIR = "C:\Deployment\Office2013Uninstall"
Import-Module TroubleshootingPack
$DIAGOFFRemoveOff2013 = Get-TroubleshootingPack -Path "${DIR}\O15CTRRemove"
Invoke-TroubleshootingPack -Pack $DIAGOFFRemoveOff2013 -AnswerFile "${DIR}\DIAG_Off_RemoveOff2013.xml" -unattended
Get-Job | Wait-Job -Timeout 1200
Get-Job | Receive-Job
Get-Job | Remove-Job -Force
I am thinking that there is some kind of dialogue questions that I need to get into the answer file, but I have no idea how to do it.
Any help is appreciated!
Best regards,
Simon

Credit goes to MS for core script (its to long to post here).
Credit goes to the guy who wrote the cleaner script. Whoever packaged it and didn't build in silent switches gets zero points.
Please note that this will only work for C2R installs of Office 2013.
This is not true. There are scrub scripts specific to C2R as well as MSI.
I extracted the scrub vbs from O15CTRRemove.diagcab
This is what worked for me. Use 7-zip to extract the entire package to a directory. Then run "OffScrub_015msi.vbs all".

How do I use microsoft office 2010 on imac?

Hi, I would like to use microsoft office 2010 on my imac for school purposes, how can I accomplish that?

I suggest that you get the student version of 2011 for mac. i believe it is around 120us or so on amazon or the apple store. The other option would be to use 2010 for windows running paralles or a similar Windows emulator.
Cheers

I created a spreadsheet using Microsoft office 2010 Excel. When I open the sheet using Numbers, the formatting changes. How do I fix this?

I created a spreadsheet using Microsoft office 2010 Excel. When I open the sheet using Numbers, the formatting changes. How do I fix this?

If you plan to share or work with people who regulary use MS Excel you should not try to use this in Numbers. You will have constant problems with how each program translates the formatting.
If you want to use Numbers, use it exclusively. If it is for your job use the tool your company uses.

Unable to find my Microsoft Office 2010 to use as a default program to open documents. How to...

I want to use my Microsoft Office 2010 program as the default program to open document. When I browse for the program a follow the path, I end up without a program to select. Where do I find the correct path to be able to choose it as the default program?

blackfoot wrote:
My old computer had microsoft word, office , etc. . How do I find it on my new computer or how do I go about getting it?
Microsoft Office is not a free program, you have to purchase it.
Some new PCs may have Office as a free trial, but when the trial is over, you will need to purchase it.

Im using Microsoft Office 2010 PowerPoint on Mac but it crashes.

I used bootcamp on a mac to run windows 7 and im using vmware 4 to run windows and mac os both at the same time.And now i installed Microsoft Office 2010 on my laptop, i opened word, excel and onenote and they work fine ,but when i click powerpoint the program works, but when i type something it crashes everytime .

here is a link showing exactly what happens.
http://www.youtube.com/watch?v=rAbGJiZg8uw

Microsoft Office 2010 encountered an error during setup: With No error codes/

Hello Everybody.
I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
so each attempt is abit time consuming. Any Ideas out there that might solve issue ?

Hi,
First try uninstalling all your Addins include connector to test the result.
If not help, try the following steps:
1) Create a new administrator account.
2) Log on and launch the installer.
If things don't quite work perfectly now:
3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
Sincerely,
Harry

Uninstall Microsoft Lync By Using Applications in Configuration Manager

Dear,
I wants to remove Microsoft Lync 2010 by using create deployment application in SCCM 2012 and install Microsoft Lync 2013 at the same time, kindly I wants to know shall I create two packages for each one first I have to uninstall Microsoft Lync 2010 by create
new package and create another package for install Lync 2013? Kindly I need steps for doing this job.
Thanks..

You can create customize the Lync2013 Admin file (navigate to your Microsoft Office setup folder, etc //Lync2013/setup.exe /admin) and create an msp file. Create a package and deploy it.
There is a portion in the MSP file where you can set what Office does after installation and before installation. This will uninstall Lync 2010 during the Office 2013 installation
1. Copy the Lync 2010 setup file (LyncSetupVolume.exe) into the same folder as your Lync 2013, create a folder called Lync2010.
2. Run eg: //Lync2013/setup.exe /admin to create a new msp file (you can also use an existing msp file if available)
3. In the MSP file , go to Setup>Add installations and run programs> add a command line (after installation, do not choose before installation) , etc //Lync2013/Lync2010/LyncSetupVolume.exe /silent /uninstall
4. Save the file.
5. Create a package with Lync 2013 //Lync2013/setup.exe /adminfile automated.msp
6. Deploy it.
You can customize the Office2013 Admin file to your liking as well. To test it out, may I suggest to deploy it through SCCM to a test machine as Available first and see if it works before deploying
Please refer http://social.technet.microsoft.com/Forums/en-US/configmanagerapps/thread/dc8c5dfa-eb1d-4ca6-8713-e37ba4175734
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Microsoft Office 2010 Presence Indicator Bubbles not showing

Hello, I'm an IT Specialist having some issues with Microsoft Outlook.
I work in a company which has +4000 users and i'm having an issue with only one of them.
The outlook presence indicators that show the status of a person according to their Microsoft Office Communicator online status are not showing for the
user. She won't be able to see them when reading emails, when creating emails or forwarding them.
Troubleshooting done so far:
- Checked the indicator settings under File - Options within outlook, both are checked.
- Verified the registry settings for PersonaMenu and IM, they are both Ok and I even compared them with my own computer.
- Uninstalled/Reinstalled Microsoft Office 2010.
- Uninstalled/Reinstalled Microsoft Office Communicator.
- Downloaded latest windows updates.
If I log in with my own domain account to the user computer I will be able to see the indicators just fine. If I log in with her domain account on my own computer her account will work fine as well. The problem is only present with her account on her computer.
The user has no admin rights so they can't install/uninstall any software from the computer without IT doing it and we all have a corporate image so nothing should be different. I still compared the MOC version to my version and they are both the same.
We run on Windows 7 Professional.
I have checked several threads and forums on other websites and I haven't found the solution yet.
We are not using any other software as Skype or Jabber or Lync that could be causing a conflict with MOC and Office.
Any help?
Thanks in advance

Hi,
Go to the Registry, check the following key is set as below:
HKEY_CURRENT_USER\Software\IM Providers\Communicator] "ProcessId"=dword:00002458 "UpAndRunning"=dword:00000002
The "UpAndRunning"=dword:00000002 value indicates that this particular IM service is available for use.
If the key is set as above but the issue persists, since the issue is related to the user's account on one specific machine, I suggest the user create a new Outlook Profile to setup the account, check if the issue will be gone:
http://support.microsoft.com/kb/829918/en-us
Hopefully this will help.
Regards,
Melon Chen
TechNet Community Support

I want to open an excel file from a folder in the Microsoft live office on Hotmail. Their instruction is to go to tools in Firefox, go to plug-ins and then install Microsofts Office 2010. Can't find plug-h. Help?

I have uploaded an excel file from my desk top to the Windows Live (HOTMAIL?) office suite. When I try to open the file I get an error that says my system is not supported. My system passes all of the listed criteria except for one. That is a plug in from Firefox. The instructions say to go to the Firefox menu, click on tools then plug-ins. Of course when I go to tools plug-ins is not immediately available, but when I do go to plug-ins, I am to click on Microsoft Office 2010. This plug in is supposed to allow earlier versions of office documents to be viewed as well as Office 2010. The plug-in is not available. When I search the Firefox website I am not able to find such a plug-in.
I am using Microsoft XP, Office 2007 and the version of Firefox prior to V4. V4 does not support all of my e-mail clients so am not able to use V4.

I am using Microsoft XP, Office 2007 and the version of Firefox V4 but I have this same problem.

Is it possible to easily run Microsoft office 2010 with access on a MacBook pro or have I wasted my money ?

Okay , first off thanks for any help in advance . I just purchased a MacBook pro for my daughter for college . ( finance major ) . Her class requires Microsoft office 2010 with access . As you probably already know , and I have just learned , that is no offered for Mac. Is there an easy way To run ms office with access on a MacBook pro or have I wasted my money ?

All that matters is file compatibility. The documents look the same. I've been a professor, so I don't see any issues here at all.
Another option you may want to consider is this: Run Windows on the Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Is it possible to Install the 64-bit Microsoft Access Database Engine 2010 if we are running Microsoft Office 2010 32-bit?

So we are running Microsoft Office Professional Plus 2010, Version 14.0.7015.1000
(32-bit)
This is what is installed via our Network and Network licensing.
I am trying, in vain, to read and write a .xlsx file via a C# Edit Script in a SSIS Package. And I have tried using...
string StringConnection = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + sourceFile + ";Extended Properties=\"Excel 12.0;HDR=Yes;IMEX=1\"";
And this tells me that this has not been installed. So when I go and try and get the Microsoft Access Database Engine 2010 64-bit, which would allow me to use Microsoft.ACE.OLEDB.12.0 and allow me to read, write, and process this .xlsx file, it tells me
I cannot install it because I already have 32-bit installed and it wants me to un-install Microsoft Office 2010. Why? Because it is 32-bit? And I can't do that because this is what we have and what we're licensed for and from what I've read seems to be the
industry standard because most software vendors are ill equipped to process 64-bit right now.
So my question is this...How can I use a C# Edit Script to read and process a .xlsx file? Because if I try using...
string StringConnection = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + sourceFile + ";Extended Properties=\"Excel 8.0;HDR=Yes;IMEX=1\"";
It then tells me that the file is not in that format.
Please excuse me for asking this question in a couple of different ways out here but I cannot for the life of me seem to be able to get an answer as to how I can process a .xlsx file with a C# script and which driver to use that will make this work.
Thanks for your review and am hopeful for a reply.
ITBobbyP85

Hi ITBobby85,
If the excel version in the Connection Manager is Microsoft Excel 2010 (.xlsx), we should use Microsoft.ACE.OLEDB provider.
We can't install 32bit and 64bit parts of office on the same machine. We will get an error as you said when we run the installer to install the 64bit version of the Microsoft Access Database Engine 2010 Redistributable in the machine where a 32bit version
of Microsoft Office installed. To fix this issue, please download and install the 32bit version of the Microsoft Access Database Engine 2010 Redistributable with the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Microsoft Office 2010 won't print on Win 8

Hello techwizes!
My Microsoft Office 2010 stopped printing on windows 8. Network Brother printer connected, online and printing from websites etc.
Suddenly it stopped printing from any Office software. Tried to remove and re-install the printer, no good.
I'd appreciate any advise!!!
Thanks in advance

Hi,
Had you tried to repair Office( Select Control Panel > Click on Programs and Features > Search for Office > Click Change > Choose Repair）？
If the issue still exits, please try the following methods:
1. If Office 2010 detects there is a problem with a printer, some printing features or the printer may be disabled. In this case, you cannot use the disabled printers to print documents anymore.
To prevent Office 2010 from disabling printers, set the DisablePrintFeaturesOnCrash registry entry.
More reference:
http://support.microsoft.com/kb/983035/en-us
2. If you can connect the PC and printer through USB, please try:
a) Click Printer Properties / Advanced / Print directly to the printer
2) Remove the printer from the system (open the Printers control panel, right click on the printer, choose Remove). Then unplug the USB and plugit back in. Windows detected the new hardware, installed the driver.
Regards,
George Zhao
TechNet Community Support

I had iCloud on my Microsoft Office 2010 and tried to increase the font size - I read to unistall and reinstall, so I did. This took iCloud away from Calendars and Contacts. I re-installed iCloud and it will not sync with my Calendars

I had iCloud installed, and it was working, then I wanted to increase font size in the notes section of Calendar. I read to uninstall iCloud and reinstall iCloud and it would be fixed.
Once I reinstalled iCloud it did not show up in Microsoft Office 2010 - Calendar or Contacts.........which it had previous to the uninstall.
When I sync it errors. I am at my wits end trying to sync this, and it just keeps erroring. I am not syncing phots/photo stream, just contacts and calendar.
Please can anyone tell me what setting I have to change??

Needed to add some clarification here:
iCloud shows me as signed in, but Calendars are NOT checked
Internet Accounts shows Calendars as syncing

How do I resolve a confict between Acrobat X Pro and Microsoft Office 2010 running on a W7 Pro 32bit

After I use Acrobat X Pro, and particularly if I have Acrobat X Pro running, the Microsoft Office 2010 programs (Outlook, Excel and Word) become very unstable.
Outlook has a real tendency to crash when I try to add a file attachment to an email.
Word gets mad while trying to find files across a local network.
and Excel almost always crashed while shutting down (the Excel program).
The problem is getting worse (more frequent crashes) as time goes by.
I am not "pointing the finger" at any specific software. I'm just looking for some things to try to resolve my problem with my setup.
If this is the wrong forum for this question I humbly beg your forgiveness (providing you give me a suggestion as to where I should go for help).
Jim

I'm having the exact issues, I guess adobe does not monitor these forum and assist their customers.

Uninstall Microsoft Office 2010 using intune

Similar Messages

Maybe you are looking for