Uninstalled older edge-code because there were two versions, but now edge code is totally gone.

How can I install edge-code again? When I try to download from adobe, the clooud application starts, shows edge-code ist installed and i have no possibility to install edge-code again.
Please tell me what to do to install edge-code again. urgent!!!! just used it!!!

Heathrowe,
Are you on Mac or Windows? Mac you should just be able to drag the Edge Code.app file to the trash. On Windows you'll have to go to Add/Remove Programs and remove it from there.
=Ryan
[email protected]

Similar Messages

In between my new iPhone and a old one, I used a replacement iPhone. On the replacement phone there were two backups created. I have a new iPhone now, but only the 2 old backups from my replancement phone. How do I get a older backup on my new phone?

In between my new iPhone and a old one, I used a replacement iPhone. On the replacement phone there were two backups created. I have a new iPhone now, but only the 2 old backups from my replancement phone. How do I get a older backup on my new phone?

Not sure where you backup to.
ITunes keeps the latest backup only.
Icloud keeps the 3 last backup.

Hyper-V 2012 R2. RemoteFx. "The remote session was disconnected because there were network problems during the licensing protocol. Please try connecting to the remote computer again."

After a Installation from Windows 8.1/windows 7 everything works fine. For example Install updates and Software. If I connect the first time a remotefx card i can use RDP as well. But if i restart the host I get the mentioned error. What can I do. These
Hosts are not in a domain configuration. I tried it too but there was no difference. I didn't discovered any errors in the eventlog, too. Only an actviex error. But same errors occurs with a succsefull rdp session.
Also strange is if i start the vm without a remotefx card it works fine again. Only session with a Remotefx card aren't possible anymore.
Is there a bug or something. I tried it many times with the same error.
Maybe someone can help me.
kind regards
Tobi

Hi Tobi,
Thank you for posting in Windows Server Forum.
For a workaround, please try to perform the two steps.
1. Do NOT enable RDP 8 on the Windows 7 SP1 VM. You should install RDP 8 and update the ICs though.
2. Change the connection setting on the client from "Automatically detect" to "LAN"
Please check again below thread for information.
a. "The remote session was disconnected
because there were network problems during the licensing protocol" after enabling RemoteFX Windows 8 VM
(Please recheck answer by “dgeddes”)
b. "The remote session
was disconnected because there were network problems during the licensing protocol" After Installing RemoteFX
Hope it helps!
Thanks,
Dharmesh

There were two emails that did appear in my Mac computer and not in the iPhone. What could have happened? Thanks Ana

There were two emails that did appear in my Mac computer and not in the iPhone. What could have happened? Thanks
Ana

On which device do you normally check mail?
I assume you must normally check on the phone and that is why you don't see it often. If you checked a POP account on your phone and hten tried to check the POP email account on your computer you would find that amy POP emails you accessed on your phone would not appear on the computer and that is because you have already downloaded them on the phone and they are no longer on the server so when your computer checks for mail the server responds to the computer and says there are no recent messages. The reverse of this would occur ifyou found new mail on your computer from the POP account. That new mail would not be found on the phone mail app

Am trying to install CS6 on my new MacBook Pro. Downloaded installer from web. Ran installer, got a dialog asking me to "Please close these applications to continue:..." There were two items on the list: Safari

"Please close these applications to continue:..." There were two items on the list: Safari & SafariNotificati (sic). I closed Safari, no problem. But could not find SafariNotifications.
What I have done so far:
Opened "Force Quit" and the only applications listed as open now are "Finder" and "Adobe Application Manager".
Pressed "Continue" on the "Please close..." dialoge
Still asks me to close SafariNotificati
Opened Safari
Opened Safari Preferences > Notifications Tab
There are no notifications listed. The list is blank.
Closed Safari again.
Checked Force Quit again (once again the only applications listed are "Finder" and "Adobe Application Manager"
Once again if I try to move on with the install by clicking on the "Continue" button Adobe asks me to close SafariNotificati
What should I do now?
My System Info
MackBook Pro (Retina, 15-inch, Mid 2014)
OS X Yosemite
Ver 10.10.1

use your activity monitor to find running processes.

I reset my IPod touch because there were gray lines don the screen, and now the screen is flickering

I reset my IPod because there were gray lines down the screen, and now the screen is flickering, any ideas?

Try:
- Reset the iOS device. Nothing will be lost (not sure which reset you did)
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Does the Airport Extreme support HP cp1025? There are two versions of the printer the cp1025 and cp1025nw. I have the cp1025, and can't set it up. Is there a list of AE/bonjour supported printers?

Does the Airport Extreme support HP cp1025? There are two versions of the printer the cp1025 and cp1025nw. I have the cp1025, and can't set it up.
Is there a list of AE/bonjour supported printers?

Bonjour is a transport protocol. It also provides a means of advertising a printer on a network.
Any list that shows printers that support Bonjour is generally an indication that the printer itself supports this protocol, meaning that when it is connected to the network, you can see it in your default Add Printer browser. In the case of the Airport, it also supports the Bonjour protocol and will advertise any printer that is connected to its USB port. The printer itself does not have to support Bonjour. The Airport performs this function. And like many lists, they are not kept up to date because each vendor releases several new models every quarter or half year.
There are definitely printers that don't work when connected to the USB port of the Airport. And this is more that the printer driver does not support this type of connection, mainly due to the port not supporting bidirectional communications which some printer drivers require. The Canon UFR2 and CAPT drivers are a good example of this limitation. But this is only the Mac drivers. The Windows equivalent drivers work fine when the printer is connected to the USB port.
So with you having an issue with the Windows drivers then I don't think it is a case of them not supporting Bonjour but more to do with some other component not functioning when the printer is shared by the Airport. The error message appears to have more to do with local user rights which is probably driver related. I've seen some printers that you cannot use the Windows Add Printer wizard to add them. Instead you have to use the vendors utility because of some proprietary protocol being used. Maybe this is one of those?
Now that you seen how it should work based on when you used the C3188, if you still get that error message at point 6 of adding the C1025 then it would suggest a driver compatibility issue with the Airport - which is not necessarily a Bonjour compatibility issue. So unless there was another model of HP printer driver that you could use to this C1025 and that was also compatible with the USB port of the Airport Extreme, then I would suggest your best action is to replace the printer with a model that does work. Maybe even one that has builtin wireless so you don't have to use the USB port of the Airport.

I was in a car collision and need proof of my location when I called 911. The Police Dept., refused to respond, since there were no injuries. Now, I have a dispute with the other driver who is falsely stating accident happened at another intersection. I

I was in a car collision and need proof of my location when I called 911. The Police Dept., refused to respond, since there were no injuries.
Now, I have a dispute with the other driver who is falsely stating accident happened at another intersection. In addition of calling 911 twice, I also took pictures of damages. Unfortunately, I did not take pictures of the intersection signs.
My AT&T carrier states that this info. can only be disclosed by a subpoena. My insurance carrier states that they will not subpoena this info., since it is a civil case only.
The Police Department does not keep records of calls they do not attend to.
How can I get this location info. from my i phone device if at all possible?
Thanks,
Pecosa
iPhone 4, iOS 6.0.1

Johnathan Burger,
I did take photos of the damages to car and license plates, but NOT the intersection signs.
How do I get the GPS Data in the exit data of photos? Please advise.
Thanks,
Message was edited by: Pecosa
Message was edited by: Pecosa

Hello On the creative cloud there are two versions of the software, for example photoshop cc and photoshop DC (2014) what is the difference thank you

hello
On the creative cloud there are two versions of the software, for example photoshop cc
and photoshop DC (2014)
what is the difference
thank you

See Installing the 2014 Release of Creative Cloud « Julieanne Kost's Blog

My MacBook pro continues to be very slow after downloading Yosemite. It keeps referring to MacBook Pro (2). It's like there are two version running side by side. Any ideas?

My MacBook pro continues to be very slow after downloading Yosemite. It keeps referring to MacBook Pro (2). It's like there are two version running side by side. Any ideas?
It is now running Yosemite 10.10.1. I seem to have plenty of memory but the machine still runs slower than before installing Yosemite. Excel has a very noticeable lag when opening and loading files.

Hi,
Thanks for the reply. I ran through the various steps as suggested including resetting the SMC.
I would say that there was about a 10% improvement. Although one of the icons still bounced for the count of 40
I'm still wondering why from the About this Mac, then System Report. it refers to my name MacBook Pro (2).
All the various problems seem to have started with the upgrade to Yosemite.

Trying to figure out pricing and plan options to add multiple computers to current subscirption. We currently have a subscription that allows the programs on two computers, but now I need 5 computers to be updated with CC.

Trying to figure out pricing and plan options to add multiple computers to current subscirption. We currently have a subscription that allows the programs on two computers, but now I need 5 computers to be updated with CC. Have looked in to Small Business teams, but do not understand how many computers that is good for and if there is a professor or previous customer discount. Any help would be great, thanks!

Hi,
I presume that the new configuration is missing some parts as you seem to have the IP address of the external interface configured staticly on the interface but you have not configured any default route on the firewall? (Original configuration got default route dynamically and added it to the routing table)
You also mentioned that you were able to connect to the Internet which would indicate there was indeed a default route with the new configuration?
I am a bit confused about the host mask on the external interface (/32 - 255.255.255.255) ? Does the ASA really let you configure a host address on the interface? It can't lead anywhere as there is no next hop with a host mask. I think the ASA even blocks using a /31 mask link network which works with Cisco Routers.
I guess I would go through the basic troubleshooting step when the new configuration is in use
Check logs for any blocked connections or error messages
Check the Static PAT (Port Forward) configuration with the "packet-tracer" command
Capture traffic on the ASAs external interface (with the ASA itself) and confirm that you are seeing the TCP SYN of any connection attempts, or perhaps capture ICMP
- Jouni

HT4623 help me to troubleshoot my ipad2 there is software update and i updated mine from 5.0 to 6 version but now the screen shows only usb cord arrow up sign then itunes and music logo. it has been like this since last night.what i will do?

help me to troubleshoot my ipad2 there is software update and i updated mine from 5.0 to 6 version but now the screen shows only usb cord arrow up sign then itunes and music logo. it has been like this since last night.what i will do?i even tried turning it off but it doesnt work too. i only see the apple logo and it comes back to cord image and itune then after 30 secs the screen turns black. help me please.

The iPad is telling you to connect your iPad to iTunes on your computer so do it. You may have to restore the device.
Restoring iOS Software.
http://support.apple.com/kb/ht1414
You may need this as well.
Unable to update or restore iPad.
http://support.apple.com/kb/ht4097

I bought apple iPad on this July , it's been only two months but now I'm getting a problem like no wifi it's greyed out sometimes and showing no wifi... Please help I'm frustrated on this , did they provided me a fault device ??

I bought apple iPad on this July , it's been only two months but now I'm getting a problem like no wifi it's greyed out sometimes and showing no wifi... Please help I'm frustrated on this , did they provided me a fault device ??

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My facebook app went dark and had the word "waiting" below it and I can not delete so I downloaded a new facebook app which is ok but the old app is still there but now the word "waiting" is gone and still cannot delete.

My facebook app went dark and had the word "waiting" below it and I can not delete so I downloaded a new facebook app which is ok but the old app is still there but now the word "waiting" is gone and still cannot delete.

This is my boilerplate respone for the "waiting apps" problem. Give these suggestions a try in order.
1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

I do not know why, but I can not go to the App Store! before I went there without any problems but now I can not connect with App Store

I do not know why, but I can not go to the App Store! before I went there without any problems but now I can not connect with App Store

Open the Finder. From the Finder menu bar click Finder > Go > Go to Folder
Type or copy/paste: ~/Library/Cookies
Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Try the App Store.

Uninstalled older edge-code because there were two versions, but now edge code is totally gone.

Similar Messages

Maybe you are looking for