Various scenario

Dear Experts,
what is the difference between these different scenarios
Pls. explain it so that a beginner can understand it.
The classic scenario
The extended classic scenario
The decoupled scenario
The standalone scenario
Kindly Regards
Marco M

Hi,
In addition to what Muthu has given.
There are Two Scenarios in SAP SRM
1.Technical Scenario
2.Business Scenario.
1)TECHNICAL SCENARIO:
The classic scenario
The extended classic scenario
The decoupled scenario
The standalone scenario
What you have mentioned is Technical Scenario.
2) BUSINESS SCENARIO
1.Self Service Procurement -Classic Scenario
2.Self Service Procurement -Extended Classic scenario
3.Plan Driven Procurement.
4.Service Porcurement
5.Contract Management
6.Master Data Management
7.Sourcing
8.Spend Analytics
For any company to implement SAP SRM  they have take one ore more scenarios to be Implement depending onthe business
process
Mandatory :  To take one scenario from Each .
Regards
G.Ganesh Kumar.

Similar Messages

  • Step By step procedures  for various scenarios Required ASAP!!!!!

    Hi All,
    Pls mail me the step by step procedure of the following scenaios.
    1.) File-XI-File Scenario.
    2.) Text file scenario.
    3.)File to Idoc
    4.)File XI- RFC.(R/3)
    5.) BPM scenarios.
    any stuff related pls mail to [email protected]
    Thanks in Advance.
    Sofia.

    Hi Sofia,
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
    BPM Scenarios:-
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    Regards.
    Praveen

  • Computer Locks up/hangs in various scenarios

    So, I just built this computer a few months ago. As soon as I started using it, I was getting hangs/lock ups and random reboots. At first it was quite random, but as time progressed, it seems to only be affected by some certain actions. What I've found
    to cause it, is when using a 3D modelling program called blender. When rendering a project, it makes it 99.999% through, then hangs. Also, when trying to render a project with Windows Movie Maker. Again, it makes it between 80%-99.999%, then hangs. The same
    thing happens when trying to play Call of Duty Advanced Warfare. (It doesn't happen with any other game, so it could probably just be the game itself. Worth noting anyways). 
    I've ran chkdsk, and Windows Memory Diagnostic, and neither seem to be the problem. I've fuddled through Event Viewer, to which I found some AODDriver service problems, which I seemed to have fixed myself. 
    I had sent the motherboard in to get checked, since that seemed most appropriate at the time. It came back with no errors, so now my leading assumption is towards the CPU. 
    I'm sure this must be quite vague, but if anyone has ever encountered similar or identical problems, and have helpful solutions, it would be greatly appreciated! 

    Hi Stuart Hattum,
    You may also take a look at the following link and see if they could help here:
    Windows 8.1, Windows 8 or Windows 7 hangs or freezes
    Fixing hangs, freezes, or does not respond errors
    Best regards
    Michael Shao
    TechNet Community Support

  • Excise Scenarios in India

    Hi ... is there any link for the Central Excise Process and in simple language and in short . With various recoprds we need to maintain and formats required . Pls do not give the link of Govt of Indias Central Excise website. I have already checked that site for terrif and reulations, act but its too complicated and its not easy to understand
    I need something which is related to pure Processes / busines. But in somehow simple language
    I need the the Process and various scenarios in Excise and Cen VAT .. for an example For Capital Goods when we take GR Excise entries get posted and CenVAT Credit can be taken in part 50 % in current year and balance 50 % in next year.
    Another example is When we are sending some equipments outside for ome work on Returnable gate Pass if these material is coming back within 180 days then no need to reverse excise entries . If coming after 180 days we have to reverse the excise entries .
    I need such type of provisions for reversing and posting excise in short so that I can built my Test Scnarios accordingly. After all before handing over my module to client for testing I want to test it throughly so that there will be no doubled work .
    Hope you understand my requirement
    Please do not send Govt of Indias CBEC link  , I have already checked it

    Not yet answered

  • Classic scenario : Confirmation and invoice in same system ?

    Hello experts,
    My question is as follows.
    I am trying to learn various scenarios in SRM as a beginner.i undrstand how the scenarios are present and what they mean .
    In classic scenario,
    can i create a goods receipt in ERP(MIGO) and then a invoice in SRM ?
    If this is possible, then i wont be able to see the related documents in the shopping cart for the self service procurement business process.
    Help me understand this process and the technical scenario.
    Will there be a constrainst that always the confirmation and invoicing has to be done in the same system. either ERP or SRM ?
    Thanks
    per

    Hi Per,
    1. Yes this is possible, We can create the confirmation and invoice in either systems.
    2. However most of the business requirements would always follow creating the follow on documents in one of the system, mostly ERP. It is totally dependent of the business and the customer. The decision of deciding on the Classic or ECS would always take this into consideration.
    Anything we do in the system should justify the business need of the customer. The possibility to create the documents is a option to provide the flexibility. Hope this helps. Let me know incase of more clarifications.
    Regards
    Mustameer

  • Scenarios in CRM

    Hi,
    I have heard about the scenarios in CRM for document flow in ECC.
    Could any one share with me the various scenarios.
    I will reward points
    Regards,
    Mayur Shah

    Hi Mayur,
    The link to the document that will explain the scenarios is
    http://help.sap.com/saphelp_crm50/helpdata/en/5b/e4f53911cac83ce10000000a114084/frameset.htm
    Hope this would help.
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

  • Scenario Based Campaign Planing

    HI Gurus,
    Can anybopdy tell me what is Scenario Based Campaign Planing? How to configure this?
    Thanks,
    Prasanna.

    Hi Satish - Not that we are using it, but from what I learned in the marketing class, scenario based planning actually refers to creating various scenarios and using it to build a particular marketing strategy. Using BI as your source for assumed data points, you will configure scenarios that will depict how a marketing plan will evolve. The inputs to this process are basically your company's marketing objectives, market data - i.e. trends in market and predictions for the FY and your strengths and weaknesses. So Scenario A can show a marketing plan that works when the market is headed north for a particular product segment, while Scenario B can depict possible performance for a marketing plan depending on governmental regulations expected...Likewise...
    Using artificially generated data in BI (based on the market statistics/predictions), scenario planning will predicted roadmaps for a marketing strategy. Based on all such scenarios the best suited ones will be selected and subsequent campaign plannings are performed.
    All - If there's anything more to this or something that I wrongly understood than please correct.
    Thanks
    Nikhil

  • Same script for three scenarios

    Need to run the same script for three scenarios. N+1, N+2, N+3 at the same time, every time. I dont wish to replicate into three scripts yet dont know how to combine into one script ! The volumes for each scenario is used to calculate dollarcost. The BUD scenario used in the script below is intentional ie if rate exists in budget, multiply by volumes of various scenarios.
    Existing script
    FIX(_SCENARIO_,"FY10","AUD")
              fix(@IDESCENDANTS("DIV 1"),@IDESCENDANTS("DIV 2"))
                   "DollarCost1"
                        (IF("Rate1"->"BUD"->"AUD"-> "Division"-> "P13" > 0)
                             "DollarCost1" = "Rate1"->"BUD"->"AUD"->"Division"->"P13" * "Litres"->"*SCENARIO*";
                        ELSE "DollarCost1" = "ActCost1";
                        ENDIF;)
              "DollarCost2"
                   (IF("Rate2"->"BUD"->"AUD"-> "Division"->"P13" > 0)
                        "DollarCost2" = "Rate2"->"BUD"->"AUD"->"Division"->"P13" * "Litres"->"*SCENARIO*";
                   ELSE "DollarCost2" = "ActCost2";
                   ENDIF;)
              "DollarCost3"
                   (IF("Rate3"->"BUD"->"AUD"-> "Division"->"P13" > 0)
                        "DollarCost3" = "Rate3"->"BUD"->"AUD"->"Division"->"P13" * "Litres"->"*SCENARIO*";
                   ELSE "DollarCost3" = "ActCost3";
                   ENDIF;)
              "DollarCost4"
                   (IF("Rate4"->"BUD"->"AUD"-> "Division" ->"P13" 0)
                        "DollarCost4" = "Rate4"->"BUD"->"AUD"->"Division ->"P13" * "Litres"->"*SCENARIO*";
                   ELSE "DollarCost4" = "ActCost4";
                   ENDIF;)
         ENDFIX

    May be lame but a possibility:
    FIX(_N+1, N+2, N+3_,"FY10","AUD")
    fix(@IDESCENDANTS("DIV 1"),@IDESCENDANTS("DIV 2"))
    "DollarCost1"
    (IF("Rate1"->"BUD"->"AUD"-> "Division"-> "P13" > 0)
    "DollarCost1" -> N+1 = "Rate1"->"BUD"->"AUD"->"Division"->"P13" * "Litres"->"*N+1*";
    "DollarCost1" -> N+2 = "Rate1"->"BUD"->"AUD"->"Division"->"P13" * "Litres"->"*N+2*";
    "DollarCost1" -> N+3 = "Rate1"->"BUD"->"AUD"->"Division"->"P13" * "Litres"->"*N+3*";
    ELSE "DollarCost1" -> N+1 = "ActCost1-> N+1";
    "DollarCost1" -> N+2 = "ActCost1-> N+2;
    "DollarCost1" -> N+3 = "ActCost1-> N+3;
    ENDIF;)
    Or is there a better way of doing this?

  • Excise invoice is not saving and not showing datas

    in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
    please help me to solve the problem
    the error is coming like this
    Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
    Message no. 8I336
    i ve already maintainthe number range for this object in tool in tax in goods moment
    please give some better advice for the excise invoice setting.

    Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
    Sub transaction type is also used for determining the accounts while
    doing excise removals.
    Within CIN the account determination is based on the transaction type.
    So normally you can have a single set of accounts for Excise
    utilization. In case you need alternate account determination for
    handling various scenarios you can define sub transaction types. The
    sub transaction types and corresponding account assignments needs to be
    maintained in CIN customization
    To make customization of Sub Transaction type, goto
    <b>SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".</b>
    Check
    <b>Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
    against the appropriate ETT</b>
    Message was edited by:
            sam masker

  • Creation of Sales Order from Service Order

    Hi All,
    I am usind BADI Workorder_update and method at_save to create a Sales Order while saving the Service Order.
    I have created the ZBAPISALESORDER_CREATEFROMDAT2 which is a copy of BAPI_SALESORDER_CREATEFROMDAT2(Since order type was ZDR).
    I have written the following stmt for Debt Memo.
                BUSINESS_OBJECT         = 'BUS2096'              " Debit Memo
    This BAPI is working fine and giving the Sales Order Number as a pop-up for information.
    But now, the problem is coming with Service Order Creation (In the transaction IW31). It is giving short dump while saving the service order after creating the sales order.
    I have checked in the standard code of Service Order. Dump is coming at
    Include : LCOZFU64
    Function Module:CO_ZF_PROJECT_BUDGET_CHECK
    Line : 258
    IF caufvdg-netzkont IS INITIAL.
              CALL FUNCTION 'STATUS_CHECK'
                EXPORTING
                  objnr             = caufvdg-objnr
                  status            = stk_vkt
                EXCEPTIONS
                  object_not_found  = 01
                  status_not_active = 02.
              subrc = sy-subrc.
            ELSE.
            ...ansonsten kann man das an NETZKONT erkennen!
              IF caufvdg-netzkont EQ con_kont_kopf.
                subrc = 02.                "kopfkontiert
              ELSE.
                subrc = 00.                "vorgangskontiert
              ENDIF.
            ENDIF.
    With my code of BAPI, it is returning sy-subrc = 01 (Object not found).
    Without my code of BAPI (Standard code of IW31), it is returning sy-subrc = 02 (status not active) which is the right one.
    Kindly help me in this regard.
    Regards,
    Priyanka Vasudeva.

    Hi,
    There are various scenarios to support end to end work managmenet process in IS-U find attached detail document at link below.
    [http://help.sap.com/saphelp_utilities472/helpdata/en/6a/1a6c35a018d041e10000009b38f839/frameset.htm]
    Scenario A describes process of creating sales order based on service order.

  • Help Needed for Internet Security Driving Test!

    Hi I came up with a few basic rules for family and friends
    that I put together in order to try to prevent them from
    continually installing spyware, toolbars, keyloggers and viruses on
    their computers (and as a result, to try to prevent them from
    continually calling me and asking for my help and advice when they
    did this and things went wrong).
    To all intents and purposes the rules worked well - for a
    while. I set it up as a simple RTF document and I added this to the
    start up folder of Windows XP, so that it started every time the PC
    started. However, over time some of them simply learned to ignore
    the rules and to close the RTF document as soon as it opened
    without paying any attention to it at all - and then they went
    about their merry business of installing spyware, keyloggers and
    viruses etc. just as they had in the past.
    So OK, I have to admit I found this deeply frustrating - but
    I also realise that this is the same position that many of us geeks
    are in in that on the whole, most average everyday computer users
    don't have a clue about Internet security.
    Now however things have become a lot more serious for me, as
    I have been asked by a local charity to administer a total of 60
    machines over 2 different sites - and I have also been asked if I
    could provide some form of training with regard to basic personal
    Internet security.
    With this in mind I came up with the idea of an interactive
    CDROM, or Flash based Internet security driving test/tutorial that
    basically covers all of the scenarios I touch on in my rules.
    This tutorial would cover basic things like, if you got an
    email from a representative ex President of an African country
    offering you a share in millions of dollars of stolen money, or if
    you got an email from your bank asking you to verify your security
    details and so on, what would you do? Additionally it would cover
    such things as the abundance of viruses that infest many of the
    porn sites on the net, the way that many games on the Internet that
    are listed as being 'free' (particularly those which are in
    executable file format) are often just vehicles for more spyware
    and viruses also - and about the dangers of chat lines, of spoof
    security warnings on web sites and so on.
    I have included my list of rules below which should hopefully
    give you an idea of what I'm trying to do. Be warned though, the
    wording is deliberately harsh and perhaps a little extreme (and as
    a result maybe not entirely 100% accurate) but you must realize
    that I am, or was trying to give myself the easiest time possible
    and the least possible problems. So you may well find things you
    disagree with in it - but overall if someone followed these rules,
    they probably would be less likely to run into problems than
    someone who did not follow them might.
    The thing is however that (as I said) I would like to
    formalise these rules somewhat in the format of some kind of
    interactive tutorial/web security driving test. Unfortunately I
    have no experience with flash - and little knowledge of HTML or
    anything like that. I also know that the language for these rules
    isn't quite right, in that it probably isn't suitable for a formal
    office type environment.
    I had in mind that the tutorial would show some realtime
    examples of some of the things I have been talking about (which I
    assume would only be possible in Flash?) or perhaps rather like a
    readers digest multiple choice type thing, with screenshots
    depicting the various scenarios in question. (Like a screenshot of
    a flash animation on a web page saying 'You have won a prize!!!'
    What would you do? a) click on the ad, b, ignore it, or c) phone
    all of your family and friends informing them of your good fortune
    before doing anything.' etc.
    So I was wondering, are there any good hearted charitable
    souls out there who might be willing to help out to put a tutorial
    like this together?
    Again I remind you that it really is for a charity
    (specifically the Depaul Trust in the UK, which helps young
    vulnerable people find secure accommodation, provides educational
    opportunities and helps them to find employment). The requirement
    would be that all staff and students pass the Internet security
    test before being granted Internet access.
    I know this might be time consuming - but again all I can do
    is appeal to the sense of kindness and helpfulness of this
    community and hope that someone who does have some experience in
    these maters might be willing to help.
    Alternatively could anyone suggest a simple easy to use
    software package that would allow a relative n00b like me to put
    together a tutorial like this on my own? Or perhaps it is possible
    that some free online tutorial like this already exists?
    In any case, any help at all would be appreciated.
    PS,
    Here are the rules I have that I referred to above.
    http://download305.mediafire.com/b6ndmljht1bg/29bbnnbz2uz/internet+rules.rtf

    Dennis, when I look at the subject three clips (EI 1250, EI 640, and EI 320, respectively, and in that order) as presented in the camera, I see exactly what I have expected all along -- three different-brightness images that are progressively brighter from the EI 1250 exposure to the EI 320 exposure.   So, am mystified why when I open these images (clips), say, in RAW Viewer, wherein I have thought that I would see the same progressive brightness differences allowing me to experiment with reducing brightness to deal with noise reduction, all three of the images present completely alike in brightness.

  • Need info on the approach for building admin forms for authoring

    Hi,
    I have a requirement to store the content in the content repository. I have two levels of data to be stored i.e. continents & countries; both continents & countries have their individual properties; continent contains countries node. I need to build a mechanism to store the content at a particular location in the JCR. The content authors should be able to add, edit or delete the continents & countries.
    What's the best way to build this admin form? Should the custom node types be created? Should a custom action type to be built? To support dynamism on UI i.e. add, edit & delete in a single form - how can it be done efficiently?
    If someone can provide me pointers, I will start with my build. Let me know if you need more information.
    Thanks,
    Chetanya

    Justin,
    The approach you listed sounds easy to implement.
    However I want to understand why out of all we choose cq:Page and why not nt:unstructured or sling:orderedFolder? Can sorting be enabled in this case?
    Also I have various scenarios where I need to store different form of data. Another example is storing product information in a alphebetical manner. There are lot of products to be stored and needs to be displayed in a tab format. The tab looks something like this A-E, F-L, M-S, T-Z, which should be configurable. Do you recommend creating one page per alphebet e:g A, B, C... and add all products (component) starting with A under page A, and so on? Or is there a better way to implement?
    Can something like calendar event be used here where in year, month and day node gets created first and then the event node is added. If so, in the above scenario how can the nodes A, B, C... be autocreated when products are added? Also the products need to be always sorted.
    Thanks,
    Chetanya

  • The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component 'GUID′ in search application 'Search Service Application' is in a good state and try again.

    Another post with a well-known title. Believe me, I know. Here's my setup;
    - 1 Server 2012 WFE, SharePoint Server 2013, totally up-to-date, including the september 2014 hotfix
    - 1 Server 2012 DB, SQL Server 2012
    Installed SP 2013 using PowerShell, with the AutoSPinstaller. Worked like a charm. Got everything up and running, with some tweaking here and there to customize it to fit my situation. Now, I can't get the Search Service Application to work. Must have created,
    deleted and recreated it at least 30 times. Used both PowerShell scripts, PowerShell line-by-line, Central Admin, heck, I even went so far as to use the configuration wizzard... No luck. I keep on getting the message that search cannot connect to the machine
    that hosts the 'administration component'.
    In order to avoid answers that suggest all the things I've already tried, here's a summary of the various scenarios I followed:
    Tried both a dedicated application pool as well as the SharePoint Web Services Default
    Timer job job-application-server-admin-service is running and not showing errors
    IIS 8.0 is installed, so is .NET 4.5 (not the known perp of IIS 7.5 and .NET 4.0)
    the get-SPEnterpriseSearchServiceInstance -local returns a healthy, online state
    the SPEnterpriseSearchQueryAndSiteSettingsServiceInstance is also running
    FireWall is disabled; registry has the BackConnectionHostNames modified with the necessary FQDNs
    Accounts used to install and / or run the serviceapp all have sufficient rights - tried a dedicated managed account, SP_2013_SearchSvc, the SP admin account, and even the original Farm account; all to no avail, I keep on getting the error message.
    Even tried stsadm to start the server search running - NOTHING WORKS!!!
    As you might understand, this is driving me nuts. About to miss my second deadline, and no amount of IISresetting is making this go away. Been stuck on this issue for far too long, now (my searching is measured in days and weeks instead of hours, by now).
    Whoever helps me solve this - you will have my eternal gratitude, and a nice bottle of Prosecco. Or whatever's your poison. You need to come get it, though. I´m situated in the Netherlands. Hey, you always meant to visit Amsterdam and see for yourself, right?
    Thanks, community, for coming to my rescue!

    Thanks again - Alas, I've been there. Deleted Search a dozen times, at least, and tried installing it, initially using a PowerShell script (tried several scripts actually, from full-blown total Search Applications with extensive topologies to the most basic
    of basics 'please just start without showing me errors'), PowerShell line-by-line to see where things went South, next tried installing through Central Admin (hoping that it was my own stupidity in overlooking things and hoping The System would get it right
    for me), and eventually even tried using the config wizzard as a total and utter last resort - Nothing worked.
    At first, I found out that removing a Service App needs a *little* bit more work than simply removing it through Central Admin, but by now I can truthfully state that if there's one thing I've become supergood at, it's removing Search Service Applications.Totally.
    I will check out the article, though - I realized early on in my SharePoint experience that regardless of what you think you know, there's so much more to find out. I know, that's almost philosophical. That is, my friends, indeed the point I've reached...

  • SAP PI 7.4 SOAP - ABAP Proxy Synchronous Webservice

    Hi Everyone,
    I am developing the following scenario:
    3rd party makes a SOAP call to SAP (via PI) to determine whether a vendor exists or not in the SAP system. The link for the call is provided by us from the Integrated Configuration.
    The request comes in, calls an ABAP Proxy to check if a vendor exists and sends a response back to the SOAP call with a 'Y' or an 'N'.
    I've read a lot about various scenarios but I'm having trouble connecting the dots as I'm fairly new to PI. I'd appreciate any help.
    I've made the following set-up based on assuming I need separate Service Interfaces for the SOAP Request & Proxy Response
    ESR
    1. Message Types
         SOAP (MT_SOAP_REQ & MT_SOAP_RESP) - PROXY (MT_PRXY_REQ & MT_PRXY_REQ)
    2.  Message Mappings
         MM_REQUEST    which maps MT_SOAP_REQ   to  MT_PRXY_REQ)
         MM_RESPONSE which maps MT_PRXY_RESP   to MT_SOAP_RESP)
    3. Service Interfaces (Synchronous)
        (SOAP Request)
        SI_IN (Inbound Interface)       with Request = MT_SOAP_REQ and Response = MT_SOAP_RESP
       (Proxy Response)
        SI_OUT (Outbound Interface) with Request = MT_PRXY_REQ and Response  = MT_PRXY_RESP 
    4. Operation Mapping
        OM_LOOKUP which maps SI_IN to SI_OUT with Request    (MT_SOAP_REQ  to MT_PRXY_REQ)
                                                                        and  Response (MT_SOAP_RESP to MT_PRXY_RESP)
    I create the ABAP Proxies for each Service Interface. SI_IN contains the required coded method to check if there is a vendor.
    I create the webservice and binding for SI_IN in SOAMANAGER
    At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation)  to get the response.
    ID
    In the Integration Directory I've created a SOAP_SENDER communication channel for System A and SOAP_RECEIVER channel for SAP.  For the SOAP Receiver I need to specify a URL - what should this be ? Is it meant to point to the web service for SI_IN in SICF or just to the generic http://host:8000/sap/xi/engine?type=entry 
    Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
    I created an Integrated Configuration for the SI_IN Service Interface with comm channel SOAP_SENDER from System A and SOAP_RECEIVER for SAP backend.  I then got the WSDL for this to provide to the 3rd Party to test (via SOAP UI)  . Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
    I appreciate you taking the time to go through this .  Any help is greatly appreciated.
    Thanks very much
    Gary

    I create the webservice and binding for SI_IN in SOAMANAGER
    At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation)  to get the response.
    >>>>No need to do anything in SOAMANAGER
    Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
    >>> No. Soap adapter is fine. Configure your receiver channel as explianed in the below blog (section 4.3)
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
    Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
    >>>>Your receiver determination and interface determination takes care of this.(receiver interface  & outbound processing tabs in ICo)

  • Actual item cost for batched items

    Hi everyone,
    I'm not entirely sure if there is an easy solution to this, however we have a client where their stock consumption method does not match their stock costing method therefore they can never really get a true stock valuation from SAP. 
    They currently have their items set to FIFO however they don't always use the oldest stock as its not always feasible to do so.
    Due to this, they cannot really find out the age of the items in stock as SAP assumes they use the oldest stock first.  To get around this I've suggested using either serial numbers for big items and batch numbers for the smaller items which will allow them to track when it came in to stock and whether it has gone out or not.  This works well and allows the users to find out the age of the stock.  However, the cost calculated in the journals and posted to cost of sales is picking up the cost from the oldest open layer in the FIFO (OINM) table and not the cost from the layer from the associated batch. 
    Is there any way we can get the system to pick up the actual cost of the item being dispatched?
    If not, we may just have to create a report which looks at all open batches, get the incoming cost and get a stock valuation that way. 
    Has anybody faced similar issues?
    Regards,
    Adrian

    Hi Marcella,
    Many thanks for your reply.
    I have looked in to both Standard and Moving Average and ran through various scenarios but unfortunately neither is exactly what the client wants and neither allows them to get a true stock valuation by item.  The client would ideally like the actual cost to be posted, but I'm afraid its either the oldest layer, average cost or a standard cost posted.
    Some items could possibly be standard as the cost doesn't alter too much, however some item costs vary rapidly dependent upon things such as exchange rates and other market influences.
    I think this may have to be done via reports.
    Regards,
    Adrian

Maybe you are looking for