Unir varios arquivo .txt em somente um arquivo .txt

Ola Pessol
Por gentileza
meu programa gera a cada 1hora, uma arquivo .TXT, durante dias de mediçoes.
gostaria de saber se é possivel unir todos esses arquivos .txt em um arquivo só?
se for possivel como posso faze-lo
obrigado

Olá Gklaus, bom dia.
Primeiramente obrigado pela atenção. Entao sobre meu problema ele foi parcialmente resolvido. Pois nao tenho experiencia com o labview.
Bom, preciso coletar uma forma de onda de um capacitor durante varios dias seguidos sem intervalos. ( 4 canais, 4 capacitores diferentes, 4 formas de onda). Precisaria que o programa que tenho, coletasse a cada segundo mais de uma amostra por canal (ou seja, mais de um ponto na curva de subida do capacitor por segundo e por canal).
Minha ideia era ligar o circuito e coletar os dados , porem quando faço isso atualmente o tempo da mediçao sai fora de sincronismo e o mesmo fica lento, depois de sete horas.
No final usaria esse arquivo (.txt) para plotar um grafico em um software expecifico Kaleidagraph. Estou trabalhando com o USB 6009 utilizando 4 canais modo diferentical, não sei como poderia adaptar meu programa para TDMS, e se fosse possivel conseguiriar converte-lo para txt?
Obs: o programa atual esta dividindo o arquivo .txt a cada 1000 segundos, achei q isso fosse resolver meu problema mas não resolveu
Abaixo segue o programa
Muito Obrigado
Anexos:
VI.zip ‏132 KB

Similar Messages

Txt Messaging Problems - forwarding/mass txts

Why can't I send out txts to more than one person at a time... or at least forward a txt message? I'm having a bbq today and wanted to send invitations to my friends via txt, but I can't do it with the iphone unless I want to retype the txt each time. Even my old outdated phone could do that without any problems. Any solutions in the works?

I have been asking the same thing i guess the only thing to do right now is to request it here http://www.apple.com/feedback/iphone.html

Textedit won't allow me to save .txt file "The file "Untitled.txt" couldn't be opened."

I have searched for this but couldn't find the answer for it. Everytime I use textedit and then tried to save my file I get the following error "The file "Untitled.txt" couldn't be opened." I am trying to save the file to my desktop with .txt extension but still not able to do so and it is driving me crazy.

I have recently upgraded to Mavericks 10.9.2 - there are a number of glitches that I have noticed. Hopefully Apple will remedy the issues soon.
Recently TextEdit has been behaving weirdly.
I type a document and go to save and I get the following:
I think you'll agree that the document exists, this is a screenshot of it.
I know there is a "/" in the name and that Mac doesn't like it but the same problem exists with whatever name is used and in whichever location is selected for the save.
Having run Macintosh since OS 8.6 I do have some working knowledge of how to resolve problems. My immediate action was to reboot the system. Nothing - same issue. I then moved to the Preferences directory (~/Library/Preferences) and did the usual trashing of the applications preferences. I noticed that in Mavericks there are way more associated preferences for each app. Nothing ventured, nothing gained, I trashed the lot and emptied the trash. I was not able to empty the trash entirely - the system informed me that one of the documents was in use. I did not have TextEdit running. I removed the offending file from the command line using rm.
I then rebooted the system again and opened TextEdit and tried again and lo and behold the documents were able to be saved. However on inspection of the Preferences again I now find that TextEdit seems to have no preferences? See the Spotlight search below.
Whilst I tend to adhere to the adage "if it ain't broke - don't fix it" in this case I would really rather like to see the TextEdit Prefs.
Maybe there is a Mac-guru out there that can explain a) what is going on here b) how to reinstate some prefs for TextEdit as it would seem pretty normal that they exist. and c) what happens if TextEdit throws a wobbler again, I have no prefs to trash
At this time of writing TextEdit seems to be behaving normally aside from the above mentioned prefs issue.

MSWord Active X txt box not converting to txt box in Acrobat forms?

I'm using MSWord 2007 and Acrobat 9 Pro. Trying to take a form that I have created in MS Word with text input boxes that have been added via the Active X developer tool and convert them to forms in Acrobat. I print to PDF and then start the forms wizard but it will not find the text boxes. It will recognize the simple check box from the legacy forms but not he text input boxes. Any words of wisdom?

Yes, the text box has a border and that border shows up clearly in the pdf. I am having to go back in the pdf, retrace the text boxes with the add text a new text field from the Add New Field option. It just does not make sense why the PDF would not recognize the text input fields from Word and convert over the field names also. All the info is there - that's why I'm wondering if it a setting that I have on my computer when I print the PDF.

Unir archivos y TOC

Hola deseo hacerles varias preguntas rápidas que me están impidiendo avanzar en mi trabajo:
Situación 1:
Estoy haciendo un manual y cada capítulo lo trabajé por aparte en InDesign CC-2014, con extensión indd. ¿Cómo hago para unir varios archivos indd en un solo documento final?
Situación 2:
Debo hacer una tabla de contenidos (TOC), ¿en qué momento la debo hacer? ¿Cuando tenga unidos todos los archivos en uno solo? o ¿Puedo hacer los TOC en cada uno de los capítulos?
Muchas gracias quedo atenta a sus respuestas.
Saludos,
Jackie

Here is a link to the proper forum for InDesign: InDesign

How to encypt a .txt file and how to decrypt a same .txt file when i need

My requirement is i want to encrypt a .txt file and
keep it in some folder. In that file we put database connection
information. when ever we need that file we have to access it and decrypt
it. with that decrypted values we have make connection with database.
i am sending a code in which i wrote both encyption and decrytion in same file, but i want to do it separately.
Please help me regarding this.
package com.businessobjects;
import java.io.*;
import java.security.*;
import javax.crypto.*;
public class EncryptDecrypt
     public static void EncodeIt()
          try
          // generate Cipher objects for encoding and decoding
          Cipher itsocipher1 = Cipher.getInstance("DES");
          Cipher itsocipher2 = Cipher.getInstance("DES");
          // generate a KeyGenerator object
          KeyGenerator KG = KeyGenerator.getInstance("DES");
          System.out.println("Using algorithm " + KG.getAlgorithm());
          // generate a DES key
          Key mykey = KG.generateKey();
          // initialize the Cipher objects
          System.out.println("Initializing ciphers...");
          itsocipher1.init(Cipher.ENCRYPT_MODE, mykey);
          itsocipher2.init(Cipher.DECRYPT_MODE, mykey);
          // creating the encrypting cipher stream
          //System.out.println("Creating the encrypting cipher stream...");
          /*FileInputStream fis = new FileInputStream("Original.txt");
FileOutputStream fos = new FileOutputStream("Encypt.txt");
          CipherInputStream cis1 = new CipherInputStream(fis, itsocipher1);
          // creating the decrypting cipher stream
          //System.out.println("Creating the decrypting cipher stream...");
          byte[] b1 = new byte[8];
int i1 = cis1.read(b1);
          while (i1 != -1)
               fos.write(b1, 0, i1);
               i1 = cis1.read(b1);
fis.close();
fos.close();*/
// writing the decrypted data to output file
FileInputStream fis1 = new FileInputStream("Encypt.txt");
FileOutputStream fos1 = new FileOutputStream(Decypt.txt");
CipherInputStream cis2 = new CipherInputStream(fis1, itsocipher2);
          byte[] b2 = new byte[8];
          int i2 = cis2.read(b2);
          while (i2 != -1)
               fos1.write(b2, 0, i2);
               i2 = cis2.read(b2);
fis1.close();
          fos1.close();
//cis1.close();
          cis2.close();
          catch (Exception e)
          System.out.println("Caught exception: " + e);
With regards
Pavankumar.

here is the solution you wanted it
uses password based encryption
but your requirements are for very badly
designed code
This is the encryption part
it converts the inputfile original.txt
into the outputfile encrypt.txt which
contains the original encrypted
import java.io.FileInputStream;
import java.io.FileOutputStream;
import javax.crypto.Cipher;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.PBEParameterSpec;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
public class PWBEncryption {
    // Salt
    static byte[] salt = {
        (byte)0xc7, (byte)0x73, (byte)0x21, (byte)0x8c,
        (byte)0x7e, (byte)0xc8, (byte)0xee, (byte)0x99
    // Iteration count
    static int count = 20;
    public PWBEncryption() {
    // params:
    // password   -> the pasword used to create the key
    // inputfile -> the file containing the stuff to be encrypted
    // i.e. original.txt
    // outputfile -> the file that will contain the encrypted stuff
    // i.e. encrypt.txt
    public static boolean doIt(char[] password,String inputfile,String outputfile){
        try{
            // Create PBE parameter set
            PBEParameterSpec pbeParamSpec = new PBEParameterSpec(salt, count);
            PBEKeySpec pbeKeySpec = new PBEKeySpec(password);
            // create secretkey
            SecretKeyFactory keyFac = SecretKeyFactory.getInstance("PBEWithMD5AndDES");
            SecretKey pbeKey = keyFac.generateSecret(pbeKeySpec);
            // create cipher
            Cipher pbeCipher = Cipher.getInstance("PBEWithMD5AndDES");
            pbeCipher.init(Cipher.ENCRYPT_MODE, pbeKey, pbeParamSpec);
            // read input
            FileInputStream fis = new FileInputStream(inputfile);
            byte[] input = new byte[fis.available()];
            fis.read(input);
            // encrypt
            byte[] output = pbeCipher.doFinal(input);
            // write encrypted output
            FileOutputStream fos = new FileOutputStream(outputfile);
            fos.write(output);
            return true;
        catch(Exception e){
            System.out.println(e.toString());
            return false;
}This is the decrypt part
import java.io.FileInputStream;
import java.io.FileOutputStream;
import javax.crypto.Cipher;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.PBEParameterSpec;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
public class PWBDecryption {
    // Salt
    static byte[] salt = {
        (byte)0xc7, (byte)0x73, (byte)0x21, (byte)0x8c,
        (byte)0x7e, (byte)0xc8, (byte)0xee, (byte)0x99
    // Iteration count
    static int count = 20;
    public PWBDecryption() {
    // params:
    // password   -> the pasword used to create the key
    // inputfile -> the file containing the decrypted data
    // i.e. encrypt.txt
    // outputfile -> the file that will contain the decrypted data
    // i.e. decrypt.txt
    public static boolean doIt(char[] password,String inputfile,String outputfile){
        try{
            // Create PBE parameter set
            PBEParameterSpec pbeParamSpec = new PBEParameterSpec(salt, count);
            PBEKeySpec pbeKeySpec = new PBEKeySpec(password);
            // create secretkey
            SecretKeyFactory keyFac = SecretKeyFactory.getInstance("PBEWithMD5AndDES");
            SecretKey pbeKey = keyFac.generateSecret(pbeKeySpec);
            // create cipher
            Cipher pbeCipher = Cipher.getInstance("PBEWithMD5AndDES");
            pbeCipher.init(Cipher.DECRYPT_MODE, pbeKey, pbeParamSpec);
            // read input
            FileInputStream fis = new FileInputStream(inputfile);
            byte[] input = new byte[fis.available()];
            fis.read(input);
            // encrypt
            byte[] output = pbeCipher.doFinal(input);
            // write encrypted output
            FileOutputStream fos = new FileOutputStream(outputfile);
            fos.write(output);
            return true;
        catch(Exception e){
            return false;
}runner
public class RunRun {
    public RunRun() {
    public static void main(String args[]){
        char password[] = {'q','w','e','r','t','y'};
        boolean enc = PWBEncryption.doIt(password,"C:\\original.txt","c:\\encrypt.txt");
        System.out.println("Encryption status == "+enc);
        boolean dec = PWBDecryption.doIt(password,"c:\\encrypt.txt","c:\\decrypt.txt");
        System.out.println("Decryption status == "+dec);
}

Script to search all files in specified folder for multiple string text values listed in a source file and output each match to one single results txt file

I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.

I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if

Background processing of S_ALR_87013558 report with output in txt file

Dear Friend's,
Here I have a requirement of, to execute standard report S_ALR_87013558 (Budget/Actual/Commitment/Rem Plan/Assigned) in background processing mode. Here we have to run this report in background on daily basis at a particular given time.
Once this report gets executed in background, output of this report should get converted automatically into txt file and this converted txt file must be downloaded in a respective folder automatically by giving desired path.
After completion of this process, downloaded txt file they have to use for internal MIS reporting purpose.
Is this possible via standard PS or else I have to go for the development.Please suggest, what should be the approach?
Regards,
Sandeep

Hi Sandeep,
Check if you can create batch job to run for S_ALR_87013558 using SM36
The Program name is GP8YTY7TBR1TYRPCIPKAC6X9GZG
Please check with ABAP.
Regards,
Nitin

11.5.10.2 to R12.1.1 upgrade : AutoPatch warning : Product Data File $APPL_TOP/admin/*prod.txt does not exist for product

Hello Sir,
OS version : AIX 6.1
DB version : 11.2.0.3
EBS version : 11.5.10.2
As a part of 11.5.10.2 to R12.1.1 upgrade, I am applying merged patch (9179588:R12.AD.B) with 9477107:R12.AD.B and patch 7461070(R12.AD.B.1 upgrade driver).
I can see AutoPatch warning messages during adpatch session as below so I have not yet started this merged patch. Please suggest.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>adpatch
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                         Oracle Applications AutoPatch
                                 Version 12.0.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Attention: AutoPatch no longer checks for unapplied pre-requisite patches.
You must use OAM Patch Wizard for this feature. Alternatively, you can
review the README for pre-requisite information.
Your default directory is '/fmstop/r12apps/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AutoPatch records your AutoPatch session in a text file
you specify. Enter your AutoPatch log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adpatch.log] : adpatch_u_merged_R12AD11.log
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ?
Please enter the batchsize [1000] : 2000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [FMSTEST] : FMSTEST *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [drix10] : drix10 *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'FMSTEST'
using ORACLE executables in '/fmstop/r12apps/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] :
AutoPatch is verifying your username/password.
The status of various features in this run of AutoPatch is:
                                           <-Feature version in->
Feature                          Active?   APPLTOP    Data model    Flags
CHECKFILE                        Yes       1          1             Y N N Y N Y
PREREQ                           Yes       6          6             Y N N Y N Y
CONCURRENT_SESSIONS              No        2          2             Y Y N Y Y N
PATCH_TIMING                     Yes       2          2             Y N N Y N Y
PATCH_HIST_IN_DB                 Yes       6          6             Y N N Y N Y
SCHEMA_SWAP                      Yes       1          1             Y N N Y Y Y
JAVA_WORKER                      No        1          -1            Y N N Y N N
CODELEVEL                        No        1          -1            Y N N Y N N
Identifier for the current session is 2987
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/eaaprod.txt
does not exist for product "eaa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/abmprod.txt
does not exist for product "abm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/evmprod.txt
does not exist for product "evm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ipdprod.txt
does not exist for product "ipd".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cssprod.txt
does not exist for product "css".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/meprod.txt
does not exist for product "me".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnmprod.txt
does not exist for product "xnm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xncprod.txt
does not exist for product "xnc".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnsprod.txt
does not exist for product "xns".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/fptprod.txt
does not exist for product "fpt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okrprod.txt
does not exist for product "okr".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cueprod.txt
does not exist for product "cue".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ibaprod.txt
does not exist for product "iba".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozpprod.txt
does not exist for product "ozp".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozsprod.txt
does not exist for product "ozs".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rlaprod.txt
does not exist for product "rla".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/vehprod.txt
does not exist for product "veh".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rhxprod.txt
does not exist for product "rhx".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/imtprod.txt
does not exist for product "imt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ahmprod.txt
does not exist for product "ahm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okbprod.txt
does not exist for product "okb".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okoprod.txt
does not exist for product "oko".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xniprod.txt
does not exist for product "xni".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/amfprod.txt
does not exist for product "amf".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cunprod.txt
does not exist for product "cun".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following language is installed:
Code   Language                                Status
US     American English                        Base
Your base language will be AMERICAN.
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Reading database for information about how products depend on each other.
Reading topfile.txt ...
Saving product information.
Trying to obtain a lock...
Attempting to instantiate the current-view snapshot...
No baseline bug-fixes info available. Will attempt next time.
     **************** S T A R T   O F   U P L O A D ****************
Start date: Sun Aug 04 2013 18:45:12
0 "left over" javaupdates.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
0 patches uploaded from the ADPSV format patch history files: Sun Aug 04 2013 18:45:12
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
     ****************** E N D   O F   U P L O A D ******************
End date: Sun Aug 04 2013 18:45:12
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [/fmstop/patches/R1211AD/merge] :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

I checked under 11i $APPL_TOP/admin directory, I can see only one izuprod.txt file apart from applprod.txt.
drix10:/fmstop/fmstest/fmstestappl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          231650 Oct 30 2004 applprod.txt
-rwxr-xr-x    1 appltest dba            4966 Sep 21 2007 izuprod.txt
R12 code tree is newly installed so there is only applprod.txt
drix10:/fmstop/r12apps/apps/apps_st/appl/admin>ls -lrt *prod.txt
-rwxr-xr-x    1 appltest dba          226340 Jul 29 15:19 applprod.txt
Please suggest if I can ignore these warning to proceed with applying merged patch.

Unable to open TXT file in memory

Greetings,
I would be very glad for any help.
I am trying to import Text file in main memory of Nokia E60 with this:
InputStream is = null;
FileConnection fc = null;
try {
fc = (FileConnection)Connector.openInputStream("file:///c:/Data/Export.txt");
is = fc.openInputStream();
} catch (IOException ex) {
ex.printStackTrace();
stringItem2.setText("Is readable? " + fc.canRead() + " Does exists? " + fc.exists());
File is (from PC view) in folder c:\Data as "Export.txt".
I tried various changes to ("file://c:/Data/Export.txt") like ("file://Data/Export.txt") etc. but with no luck. I am still not able to open file and get some info from it. When I click on button, nothing happens.
Thanks...
Petr

Messgae captured as 'Permission Denied". The program gets triggered with system user Id PPID.
How to check the security access of the User ID.

Javascript in .PDF's - Extracting text from .doc or .txt

Hello All,
I am very new to javascript in .pdfs -- but I seem to find my around doing misc. work with forms. What I need:
I need a Form with a Submit button that locates and extracts the text from a file and places it into another field.
Example:
on Server:
one.txt or one.doc
two.txt or two.doc,
...etc
You type one in the form and submit -- it pulls all of the txt from one.txt off the server and places it into a field.
Also if there is anyway to do this with tables to avoid multiple files that would be even better.
I know I am a newbie, but this would be a game-changer for what I do.
Thank you.

Thanks for the advice
It is accessing a shared file server (among employees) and it is to be a .pdf used in Adobe Acrobat Professional
Basically I want it to be a form that pulls txt based on what was in the typed box or drop-down menu from a .txt or .doc

How to skip all files other than .txt file in Mail Sender Attachemnt ?

Hi Friends ,
                  I am reading an Mail attachement and sending to R3 using PaloadSwapBean and MessageTransformBean .
                     I used to get attachement as .txt file , name like Ex10185.txt in one mail . In another mail Ex10186.txt like that.
                    If only thoses file comes then no problem .
<b>                   IF some times along with .txt file some .html files are coming by that time my Mail Adapter incorretly reading the .html file.</b>
            <b>      Please tell me how to skip those kind of attachements and read only .txt file</b>
                      Expecting your answers asap.
Best Regards.,
V.Rangarajan

Hi Michal,
               Thanks for your reply , Sorry! I am aware of how to write adapter module. Can you please tell me how to write adapter module ?
                  Is there any links available or Blogs ?
                 I am expecting your reply asap .
Best Regards.,
V.Rangarajan

How to use certain entries from a txt file as metadata?

So during my plugin development I stumbled on a problem.
I have created a txt file for each picture telling me who's in the photos. So the first column in the file shows all the names that appear in the photo.
I want to add those names into LR for each photo. I thought using them as metadata would be a good idea. Then I could let the user enter a name of some person and create a smart collection having all photos with that person in them.
But putting it into practice isn't that easy.
So I started with the classic metadata definition:
metadataFieldsForPhotos = {
id = 'Person',
title = 'Person'
dataType = 'string',
searchable = true,
browsable = true,
Now I don't know how to actually read only the column entries of the txt file and displaying all the names appearing in it. Another problem is that each photo has its own txt file in "nameofphoto.jpg.txt" So LR must know which txt file belongs to a photo.
I know my question isn't very specific but it would be great if someone could help...

Thank you for the reply. Reading the file how I wanted worked fine and I chose to use keywords, as you suggested.
So now I tried to add the keywords to the pictures and I get:
"LrCatalog:withWriteAccessDo: could not execute action 'keywordProvider'. It was blocked by another write access call, and no timeout parameters were provided."
There's my function so far:
function Finder.findPerson(smartCollectionName)
     local catalog = LrApplication.activeCatalog()
     local photos = catalog:getMultipleSelectedOrAllPhotos()
       LrTasks.startAsyncTask( function()
            for i=1,#photos do
                 local photo = photos[i]
                 local photopath = photo:getRawMetadata("path")
                 local photoname = photo:getFormattedMetadata("fileName")
                 local folderpath = string.sub(photopath, 1, string.len(photopath) - string.len(photoname))
                 local metadataPath = folderpath .. "\.metaface\\" .. photoname .. ".txt"
                 local text = LrFileUtils.readFile(metadataPath)
                 local metadataValues = stringSplit(text)
                 for i = 0, #metadataValues do
                      catalog:withWriteAccessDo( "keywordProvider", function()
                           local keywords = catalog:createKeyword(metadataValues[i])
                           photos:addKeyword(keywords)
                      end)
                 end
           end
      end)
end
So what am I doing wrong?

File with list of .txt files in a specific directory

Hi,
I need to create a file with list of .txt files in a specific directory (actually the command will be used by a java application).
I am using the below command,
ls home/apptmt/park/*.txt > home/apptmt/park/reportgen.txt
but this command prints output as
home/apptmt/park/report1.txt
home/apptmt/park/report2.txt
home/apptmt/park/report3.txt
I need only the files in reportgen.txt file, like
report1.txt
report2.txt
report3.txt
any one help me on the command I should use to get this output?
Thanks
MT

Thank you Dude!
I just found out that
cd /home/apptmt/park;ls *.txt > reportgen.lst works for me...
I will try this one as well... thank you very much...
MT

Wat should be the regular expression for string MT940_UB_*.txt to be used in SFTP sender channel in PI 7.31 ??

Hi All,
What should be the regular expression for string MT940_UB_*.txt and MT940_MB_*.txt to be used as filename inSFTP sender channel in PI 7.31 ??
If any one has any idea on this please let me know.
Thanks
Neha

Hi All,
None of the file names suggested is working.
I have tried using - MT940_MB_*\.txt , MT940_MB_*.*txt , MT940*.txt
None of them is able to pick this filename - MT940_MB_20142204060823_1.txt
Currently I am using generic regular expression which picks all .txt files. - ([^\s]+(\.(txt))$)
Let me know ur suggestion on this.
Thanks
Neha Verma

Unir varios arquivo .txt em somente um arquivo .txt

Similar Messages

Maybe you are looking for