Unit Conversion Error in Direct Input

Hi Experts,
I am getting a error "E MG 427: Conversion error: field BMMH6-MEINH; content PAK" When I am uploading Alt. UoM using BMHH6 structure in Direct Input. I checked value for UoM in converted data it is "PAC". I think system is internally converting it to PAK so the error is coming.
Please let me know what need to be done to avoid this error.
Thanks in Advance..
-Harkamal

HI
If u r giving alternate UOM in Material Master.
first u need difine the conversion factor.
in basic data view u will have addtional data tab.
in that u need to define conversion factors first.
regards,
raghu

Similar Messages

Unit Conversion Error in Direct Input method for data transfer

Hi Experts,
I am getting a error "E MG 427: Conversion error: field BMMH6-MEINH; content PAK" When I am uploading Alt. UoM using BMHH6 structure in Direct Input. I checked value for UoM in converted data it is "PAC". I think system is internally converting it to PAK so the error is coming.
Please let me know what need to be done to avoid this error.
Thanks in Advance..
-Harkamal

Hi
Before passing this unit to the program
check the conversion Exit in the Domain of the Field
and use the fun module
CONVERSION_EXIT_ALPHA_INPUT and pass that value and see how it takes
otherwise use the fun module UNIT_CONVERSION_SIMPLE and pass the value to program
Regards
Anji

Unit conversion Error during initialize planning area

Hi,
When the dependent requirements planning area initialized for version 700 after filling BOM for Finished products for a Plant, system throws error message u201CUnit conversion not possible for product XXXXX (KG=>KM) u201D. The planning area UOM is KM and the finished product uom is also KM. The components uom is KG and EA. Why this error is thrown.
We can't maintain a alternate UOM measure for the component for EA and KM conversion.
Can someone explain how to overcome this error.
thanks and regards
Murugesan

Please check the specific product on your system if they have same base UoM both ECC and APO. Also do you have user-exit for unit of measures implemented on your system?
Thanks!

XML to ABAP Conversion Error - CX_SY_CONVERSION_DATA_LOSS

REPORT y_rpt_test .
TYPE-POOLS sscr.
DATA: restrict TYPE sscr_restrict,
opt_list TYPE sscr_opt_list,
*** TYPE sscr_***.
DATA: options TYPE STANDARD TABLE OF rfc_db_opt ,
fields TYPE STANDARD TABLE OF rfc_db_fld ,
meta TYPE STANDARD TABLE OF ywas_metadata ,
xml_out TYPE string .
data: xml_out_x type xstring.
DATA: wa_options LIKE LINE OF options,
wa_fields LIKE LINE OF fields ,
wa_meta LIKE LINE OF meta .
FIELD-SYMBOLS: <outtab> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
DATA: xslt_error TYPE REF TO cx_xslt_exception ,
xslt_message TYPE string .
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
TYPES: BEGIN OF s_text,
 partnum(18) TYPE c,
 LONG_DESC(3000) TYPE c,
 END OF s_text.
data: lt_outtab type standard table of s_text,
 is_outtab type s_text.
data: it_temp_text(1000) TYPE c OCCURS 0 with header line.
data : l_file TYPE string value 'C:xmlload.xml'.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 filename = l_file
 FILETYPE = 'ASC'
tables
 data_tab = it_temp_text.
loop at it_temp_text.
 concatenate xml_out it_temp_text into xml_out.
endloop.
 IF NOT xml_out IS INITIAL .
 TRY .
 CALL TRANSFORMATION (`ZTEST1`)
 SOURCE XML xml_out
 RESULT outtab = lt_outtab.
 CATCH cx_xslt_exception INTO xslt_error.
 xslt_message = xslt_error->get_text( ).
 WRITE:/ xslt_message .
 ENDTRY.
 ENDIF .
 break-point.
 write : / 'test'.
==========================================================
I am using above code to convert input XML file into internal table I am getting conversion error. My input XML file looks is as follows. It is throwing this error in call transformation. Appreciate your help in Advance.
<MODIFIED BY MODERATOR - RESPECT THE 2,500 CHAR LIMIT>
Code Formatted by: Alvaro Tejada Galindo on Jan 4, 2010 3:31 PM

Thanks for quick response.
I think the problem is with special characters in the input XML file. If I don't have special characters in XML file then it works fine.
Anyway here is the XSLT code. This is a generic XSLT code which I used from one of the examples
posted on this site.
<?xml version="1.0" encoding="iso-8859-1"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:xa="urn:schemas-microsoft-com:xml-analysis:mddataset" xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<xsl:output method="xml" />
<xsl:variable name="fieldNames" select="//asx:abap/asx:values/FIELDCAT" />
<xsl:template match="/">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>

<OUTTAB>
<xsl:apply-templates select="//item" />
</OUTTAB>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="//YWAS_METADATA">
<item>
<xsl:for-each select="*">

<xsl:copy>
<xsl:apply-templates select="@*|*|text()"/>
</xsl:copy>
</xsl:for-each>
</item>
</xsl:template>
<xsl:template match="//item">
<item>
<xsl:for-each select="*">

<xsl:copy>
<xsl:apply-templates select="@*|*|text()"/>
</xsl:copy>
</xsl:for-each>
</item>
</xsl:template>
</xsl:stylesheet>

BDC-Direct Input

Please give an example for Direct Input method in BDC.When it is used? what is the advantage and disadvantage?

Hi Khanna Renga ,
Direct Input method is used for bulk transfer of data into SAP system.It results in faster execution since no screens are processed and the SAP database will be updated directly using the standard function modules.
Better example where direct input method will be used is... uploading the data for material master.....it includes lot of views so its very much difficult to capture all the views and record the tcode and map the data in such conditions its better to go with DI methods
Advantages:
in session method or Call Transaction method while uploading the data u do the validation by fallowing the screen sequence and field sequence where as in Direct Input validations can be done set of code so this make the process very fast so its advantageous to upload large amout of data.
you always use the standard sap provided program for this.
Here in Direct Input method very important thing is structure of flat file... so to know the structure first of all you have to download the data for one record into the internal table with the use of the same program then with the use of that structure u have to desing the flat file and upload the data.
Direct Input:
With direct input, the SAP function modules execute the consistency checks. However with batch input, these consistency checks are executed with help of the screens. This means that direct input has considerable performance advantages. But there are a few programs for direct input, you can use them if it accomplishes your goal. Direct Input programs work like that they update database tables directly. As you know that it is forbidden to update SAP database tables directly, since consistency and security should be considered. Exceptions are these direct input programs. So you are not able to write custom ABAP direct input programs. But of course you can write ABAP programs to update custom database tables (Z tables), if you are sure all about consistency.
SAP has created direct input programs because SAP wanted to enhance the batch input procedure, since batch input is slower. SAP offers the direct input technique, especially for transferring large amount of data. In contrast to batch input, this technique does not create sessions, but stores, updates, inserts data directly. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or transaction BMV0.
Examples for direct input programs are:
RFBIBL00 - FI
RMDATIND - MM
RVAFSS00 - SD
RAALTD11 - AM
RKEVEXTO - CO-PA
Also have a look on below thread..
Re: re: direct input method
Re: Give a BDC example by Direct Input Method
In contrast to batch input, this technique does not create sessions, but stores the data directly. It does not simulate the online transaction. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to be able to activate the restart mechanism, direct input programs must be executed in the background only. Direct input checks the data thoroughly and then updates the database directly.
Hope it will solve your doubts and problem..
Reward points if useful..
Thanks & Regards
ilesh 24x7

Direct input in bdc

Hi all,
Can anyone explain me what is the use of direct input method over call transaction / session method....
Regards,
subbu.

hi,
Data is transferred from an external system into the SAP R/3 System. You use data transfer when you:
Transfer data from an external system into an R/3 System as it is installed.
Transfer data regularly from an external system into an R/3 System.
There are three basic methods for Data Transfer:
Direct Input (DINP)
With direct input, the SAP function modules execute the consistency checks. However with batch input, these consistency checks are executed with help of the screens. This means that direct input has considerable performance advantages. But there are a few programs for direct input, you can use them if it accomplishes your goal. Direct Input programs work like that they update database tables directly. As you know that it is forbidden to update SAP database tables directly, since consistency and security should be considered. Exceptions are these direct input programs. So you are not able to write custom ABAP direct input programs. But of course you can write ABAP programs to update custom database tables (Z tables), if you are sure all about consistency.
So why SAP has created direct input programs? Because SAP wanted to enhance the batch input procedure, since batch input is slower. SAP offers the direct input technique, especially for transferring large amount of data. In contrast to batch input, this technique does not create sessions, but stores, updates, inserts data directly. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or transaction BMV0.
Examples for direct input programs are:
RFBIBL00 - FI
RMDATIND - MM
RVAFSS00 - SD
RAALTD11 - AM
RKEVEXTO - CO-PA
CALL TRANSACTION
It seems like batch input method. Data consistency check with help of screen logic.
Batch Input with batch input sessions.
Data consistency check with help of screen logic. Batch Input is a standard technique for transferring large sets of data into the SAP System. The transaction flow is transferred as if it were entered online. The advantage of this is that all relevant check for the transaction are executed, thereby ensuring that the data is consistent.
Hope this helps, Do reward.

Direct Input Programs in SAP

Hi,
Can anybody provide me the list of Direct Input programs available in SAP.
Thanks,
Sunil.

hI,
Direct Input:
A recent technique to input data safely. An alternative to batch input.
With direct input, the SAP function modules execute the consistency checks. However with batch input, these consistency checks are executed with help of the screens. This means that direct input has considerable performance advantages. But there are a few programs for direct input, you can use them if it accomplishes your goal. Direct Input programs work like that they update database tables directly. As you know that it is forbidden to update SAP database tables directly, since consistency and security should be considered. Exceptions are these direct input programs. So you are not able to write custom ABAP direct input programs. But of course you can write ABAP programs to update custom database tables (Z tables), if you are sure all about consistency.
SAP has created direct input programs because SAP wanted to enhance the batch input procedure, since batch input is slower. SAP offers the direct input technique, especially for transferring large amount of data. In contrast to batch input, this technique does not create sessions, but stores, updates, inserts data directly. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or transaction BMV0.
Examples for direct input programs are:
RFBIBL00 - FI
RMDATIND - MM
RVAFSS00 - SD
RAALTD11 - AM
RKEVEXTO - CO-PA
Regards
Kiran Sure

LSMW Direct Input Method - Change Documents

Hello experts,
Could anyone please tell me how to enable the change documents(not just runtime) for LSMW direct Input method? There is also one option "Change Documents" in the last step of the process, will this write into any table that I see the changes later If I run the last step with selected this option? If yes, What are the application (customer master data, vendor master data, material master data, etc) specific tables?
Is there anyway that I could populate this method changes into the CDHDR & CHPOS tables?
SAP documenation on this:
To enter the data into the *corresponding database tables directly*, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism
http://help.sap.com/erp2005_ehp_04/helpdata/EN/fa/097174543b11d1898e0000e8322d00/content.htm
Since this tool writing data into database tables directly skips the CDHDR & CDPOS recording..
Is there any other possible way for the complete change logs (change pointers???)? ( Or only table logging?)
Please share your experience on this.
Thanks,
Himadama

No response received..

Difference between Batch input and Direct Input

Hi please tell me the difference between Batch Input and Direct Input in BDC?

hi aparna,
DIRECT INPUT
TO ENTER THE DATA INTO THE CORRESPONDING DATABASE TABLES DIRECTLY, THE SYSTEM CALLS A NUMBER OF FUNCTION MODULES THAT EXECUTE ANY NECESSARY CHECKS. IN CASE OF ERRORS, THE DIRECT INPUT TECHNIQUE PROVIDES A RESTART MECHANISM. HOWEVER, TO BE ABLE TO ACTIVATE THE RESTART MECHANISM, DIRECT INPUT PROGRAMS MUST BE EXECUTED IN THE BACKGROUND ONLY. DIRECT INPUT CHECKS THE DATA THOROUGHLY AND THEN UPDATES THE DATABASE DIRECTLY.
TO MAINTAIN AND STRAT THESE PROGRAMS, USE PGM RBMVSHOW OR THE TRANSACTION BMVO.
BATCH INPUT
TYPES SESSION METHOD, CALL TRANSACTION, DIRECT INPUT.
TO SAVE DATA IN THE BDCTAB, USE THE FIELDNAME BDC_OKCODE AND FIELD VALUE OF /11.
BDCDATA
THIS IS A STRUCTURE WHICH CONTAINS THE FOLLOWING FIELDS.
PROGRAM NAME OF TH MOD PROG ASSOCIATED WITH THE SCREEN. SET ONLY FOR THE FIRST RECORD OF THE SCREEN.
DYNPRO SCREEN NUMBER. ALSO SET ONLY FOR FIRST RECORD.
DYNBEGIN INDICATES THE FIRST RECORD OF THE SCREEN. SET X FOR FIRST RECORD OTHERWISE .
FNAM FIELD NAME.
FVAL VALUE FOR THE FIELD NAMED IN FNAM.
THE FIRST STEP IN BDC IS TO UPLOAD DATA FROM THE FLAT FILE OR SEQUENTIAL FILE TO THIS BDCTABLE.
SESSION METHOD
WE USE 3 FUNCTION MODULES IN THIS SESSION METHOD.
1) BDC_OPEN_GROUP
 USER NAME: USER NAME
 GROUP: NAME OF THE SESSION
 LOCK DATE: THE DATE ON WHICH YOU WANT TO PROCESS THE SESSION.
 KEEP: THIS PARAMETER IS PASSED AS X WHEN YOU WANT TO RETAIN SESSION AFTER PROCESSING IT OR TO DELETE IT AFTER PROCESSING.
THIS CREATES A SESSION
2) BDC_INSERT
 TCODE: TRANSACTION NAME
 DYNPROTAB: BDC DATA
THIS CREATES A SEESION AND DATA IS TRANSFERRED O SESSION.
3) BDC_CLOSE_GROUP THIS CLOSES THE BDC GROUP.
ONLY ONE SESSION CAN BE CREATED USING BDC_OPEN_GROUP. BUT MULTIPLE TRANSACTIONS CAN BE PROCESSED USING BDC_INSERT.
CALL TRANSACTION
CALL TRANSACTION <TCODE> USING <BDCTAB>
 MODE <A/N/E>
 UPDATE <S/A>
 MESSAGES INTO <MSGTAB>.
A ALL SCREEN MODE. ALL THE SCREEN OF THE TRANSACTION ARE DISPLAYED.
N NO SCREEN MODE. NO SCREEN IS DISPLAYED WHEN YOU EXECUTE THE TRANSACTION.
E ERROR SCREEN. IF THE SCREEN HAS ERROR RECORD, THEN THAT SCREEN WILL BE DISPLAYED.
S - IF YOU CHANGE DATA OF ONE TABLE THEN ALL THE RELATED TABLES GETS UPDATED. AND SY-SUBRC IS RETURNED I.E., SY-SUBRC IS RETURNED FOR ONCE AND ALL.
A - WHEN YOU CHANGE DATA OF ONE TABLE, THE SY-SUBRC IS RETURNED. AND THEN UPDATING OF OTHER AFFECTED TABLES TAKES PLACE. SO IF SYSTEM FAILS TO UPDATE OTHER TABLES, STILL SY-SUBRC RETURNED IS 0 (I.E., WHEN FIRST TABLE GETS UPDATED
WHEN YOU UPDATE DATABASE TABLE, OPERATION IS EITHER SUCCESSFUL OR UNSUCCESSFUL OR OPERATION IS SUCCESSFUL WITH SOME WARNING. THESE MESSAGES ARE STORED IN INTERNAL TABLE, WHICH YOU SPECIFY ALONG WITH MESSAGE STATEMENT. THIS INTERNAL TABLE SHOULD BE DECLARED LIKE BDCMSGCOLL, A STRUCTURE AVAILABLE IN ABAP/4. IT CONTAINS THE FOLLOWING FIELDS: TCODE, DYNAME, DYNUMB, MSGTYP, MSGID.
DIFFERENCE BETWEEN SESSION AND CALL TRANSACTION
 SESSION METHOD CALL TRANSACTION
1. DATA IS NOT UPDATED IN DATABASE TABLE UNLESS SESSION IS PROCESSED. IMMEDIATE UPDATION IN DATABASE TABLE.
2. NO SY-SUBRC IS RETURNED. SY-SUBRC IS RETURNED.
3. ERROR LOG IS CREATED FOR ERROR RECORDS. ERRORS NEED TO BE HANDLED EXPLICITLY
4. UPDATION IN DATABASE TABLE IS ALWAYS SYNCHRONOUS
 UPDATION IN DATABASE TABLE CAN BE SYNCHRONOUS OR ASYNCHRONOUS.
5. ASYNCHRONOUS PROCESSING SYNCHRONOUS PROCESSING
6. TRANSFERS DATA FOR SINGLE TRANSACTIONS TRANSFERS DATA FOR MULTIPLE TRANSACTIONS
ERROR HANDLING IN CALL TRANSACTION
1) CREATE AN INTERNAL TABLE SIMILAR TO THE STRUCTURE OF YOUR LOCAL FILE.
2) CREATE BDCTAB LIKE BDCDATA.
3) CREATE BDCMSG LIKE BDCMSGCOLL.
4) CREATE AN INTERNAL TABLE SIMILAR TO THE 1ST INTERNAL TABLE.
5) UPLOAD FN UPLOADS DATA FROM THE LOCAL FILE TO THE ITAB.
6) LOOP AT ITAB.
POPULATE BDCTAB TABLE.
CALL TRANSACTION STATEMENT.
PERFORM CHECK.
REFRESH BDCTAB.
ENDLOOP.
7) FORM CHECK.
IF SY_SUBRC <> 0.
CALL FUNCTION FORMAT_MESSAGE.
APPEND ITAB2.
ENDFORM.
TRANSACTION FOR RECORDING SHDB.
MAX TIME ALLOWED FOR ONLINE EXECUTION 300 SECONDS.

Pls reward if helpful.

Can anybody tell me why "Direct Input Method of BDC" said to be Obselete?

Why it is said that "Direct Input Method of BDC" is obselete?

hi,
Direct Input:
A recent technique to input data safely. An alternative to batch input.
With direct input, the SAP function modules execute the consistency checks. However with batch input, these consistency checks are executed with help of the screens. This means that direct input has considerable performance advantages. But there are a few programs for direct input, you can use them if it accomplishes your goal. Direct Input programs work like that they update database tables directly. As you know that it is forbidden to update SAP database tables directly, since consistency and security should be considered. Exceptions are these direct input programs. So you are not able to write custom ABAP direct input programs. But of course you can write ABAP programs to update custom database tables (Z tables), if you are sure all about consistency.
SAP has created direct input programs because SAP wanted to enhance the batch input procedure, since batch input is slower. SAP offers the direct input technique, especially for transferring large amount of data. In contrast to batch input, this technique does not create sessions, but stores, updates, inserts data directly. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or transaction BMV0.
Examples for direct input programs are:
RFBIBL00 - FI
RMDATIND - MM
RVAFSS00 - SD
RAALTD11 - AM
RKEVEXTO - CO-PA
I hope it helps.
In contrast to batch input, this technique does not create sessions, but stores the data directly. It does not simulate the online transaction. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to be able to activate the restart mechanism, direct input programs must be executed in the background only. Direct input checks the data thoroughly and then updates the database directly.
cheers!'sri

Error in uploading the PO while running Direct Input porgram RM06EEI0

Hi all
i have written one conversion program to upload PO. Here in the program i am populating the batch input structures MBEPOH and MBEPOI and finally writing it to the unix file.
Finally when i execute the direct input program RM06EEI0
using the logical filename , it gives the error as 'Net price should be greater than 0' .
i have also checked the file in the unix directory , there the net price is getting populated correctly. Also i debugged the direct input program and found out that net price is getting passed correctly to FM ME_CREATE_PO_ITEM but somewhere the KOMP structure is not getting populated ,that is why net price becomes 0.
Can anybody please tell whether there is some issue in writing the conversion program or i am missing some parameters to be passed in MBEPOH or MBEPOI, or what has to be done.
Please help me , it is urgent .
Thanks and Regards,
Syed

I have the same problem, could somebody help?
Thanx, Marian

Net Price Calculation Error in LSMW(Direct Input)

Hi,
i am using LSMW-Direct Input method for Creating Purchase Order .i am facing Problem like Quantity Conversion error in Net Price Calculation.
Any one please help me out.
Regards,
Shobha Henry

Best practice would be to use BAPI/ALE method instead of direct input but if you've already done with the mapping etc. try putting a break point in the generated LSMW program where the net price is calculated and transferred to SAP field and then run it to see in the debugger what's going on. I reckon its possibly a type compatibility error.
Hope this helps,
Cheers,
Sougata.

Lsmw : Direct Input : 0020 Material Master :Error

hi all !
I'm onto making a lsmw for material master direct input.i'm facing the following error :
1.The field Marc-LADGR is defined as a required field : it doesnt contain an entry
2.You have not fully maintained the tax classifications.
in my flat file i have duly filled in the field MARC-LADGR
need help ,plz see if you can track wats the problem.
thanks and regards,
sachin

ya sachin ... as u r telling .. download from the std program... & continue the process....
my suggestion ... cross check again with ur fields of the source structure ....i mean decalre only fields .. which are required .. then do the field mapping again for the all the fields...
i believe there will be documentation for the std program .... check it & go thru with that ..map it ... wherever needed ....
try & let me know...
thanks,
manjunath ms

Error log table for LSMW-Direct input

Can any one tell me , What is the table for storing the error messages in LSMW-Direct input?
Regards,
Nagesh

for LSMW-Direct input method you can use EXCUTE IN BACK GROUND. the job is running and see the job name in SM37 . after completion of your job , select you job name and press the SPOOL button there you can find the you job error log.

Error Log in Direct Input Method of LSMW

Hello!
We are developing an upload through LSMW using its direct input method for material master. This method is better than the Recording method but the only problem we are having is maintaining the error log. Unlike the recording method, in direct input the system gives an error log but it cant me maintained in a permanent file i.e when we go back to the upload for specifying a new file, the error log of the previous file is gone.
Is there any way that we can maintain the error log in a permanent file? Help needed ASAP!
Thank You!
Regards
Sahar

When i enter %PC in the command field the system gives following information
Function code cannot be selected
     Message no. 00255
Diagnosis
     You entered an inactive function code.
     You can trigger this by:
     o   inputting directly in the OK code field,
     o   inputting the fastpath of an inactive menu function,
     o   choosing an inactive function key, or even by
     o   choosing ENTER, if ENTER has an inactive function.
     In batch input, a function code is included in field BDC_OKCODE of the
     session, if this function code is not assigned to ENTER.

Unit Conversion Error in Direct Input

Similar Messages

Maybe you are looking for