Unit of measure in condition table
Hi,
I'm creating a new condition type and it should be maintained in MEK1/2/3.
The new condition type is copied from RUC1.
According to the business requirement, I have set REST as the access sequence to the new condition type.
Requirement;
1. The condition record should be determined by vendor
2. The validity period will not in use (i.e. 1900/01/01-9999/12/31)
3. The unit of measure of the material to be purchased can be either PCE or PR
Issue;
It seems I can create a condition record per one vendor per only one UoM.
I have create a condition record for PCE, and set a scale 1PR = 1PCE for that condition record.
However, when I've tried to create a PO, I've got a quantity conversion error.
Does any one know how I can configure the 2 UoM for one vendor?
Restriction;
The material master is shared with other companies.
Therefore, we cannot maintain material master for this local requirement.
It has to be managed only by configuration.
Your help would be much appreciated.
Best Regards,
Mari
Test once by using your own custom condition table.
Create a condition table for the fieldCatlg Vendor, Material, Oder Unit etc (as per your requirement)
Then rest of all as per your settings. Then you can maintain the condition record as per order unit.
For more about create condition table refer to the blog Pricing procedure Steps and Details in SAP MM
Similar Messages
-
Change for Unit of measure in condition master
Hi, gurus..
I want to know this is SAP error or not..
I created condition for material H20.
H20 70500 usd per 1 SET
and edited the unit of measure in addtion of material master record.
1 EA - 1EA
1 SET - 6 EA
then I create SO in VA01 with line item
H20 1EA ...
but condition record showed me a wrong value..
H20 11774 usd per 1EA...
70500 / 6 = 11750 usd..Why 11774...??
So, I changed the condition for more test..
H20 11750 usd per 1EA...
After input line item in VA01.
H20 1 Set...
then condition was 70500 usd per 1 SET ..Right result..
I tried it on other system ( Best Practices 1606) once more but result was same.
This is SAP ERROR ??? or not..
Plz..give me your ideas..Dear Kim,
this error will come due to conversion factor at sales order level .kindly check in the item level how the conversion factor will take the system and also try to change the Quantity and check once again. this will come rare case , if you want to check the conversion error ,debug at the sales order level . for your reference I am attachment the conversion factor path .
Regards, -
Hello,
I wiould like to ask, in the Unit Of Measure (UoM) of table PLPO we cannot see the description of this UoM (STD) was it stands for?
Thanks
Edited by: SAP_PHIL on Mar 23, 2009 10:01 AMDescription of UOM is stored in table T006A-MSEHT. Link PLPO with T006A
-
Unit of Measure missing in Shopping Cart
Hi all,
Currently, we have implemented BADI BBP_CATALOG_TRANSFER to map Unit of Measure from z-table, based on shopper's backend system. The mapping is done successfully when it return to Shopping Cart (e.g. PAC (catalog UoM) -> PAK (backend system's UoM)).
When I am at "Step 2: Shopping Cart", I've tried to view Item details (click on Magnifier icon in 'Action' column), and I noticed that mapped UoM 'PAK' is still there. However, when I click on 'Check' button, I found that the following error message returned:
"Enter a unit of measure"
I am wondering why UoM will be missing, and I notice that when the time I click on 'Check' button, it went through to BADI BBP_DOC_CHANGE_BADI of Method BBP_SC_CHANGE. I have checked import table IT_ITEM and found out that IT_ITEM-UNIT is missing.
Although I have put an breakpoint in Method BBP_SC_CHANGE, I discover that IT_ITEM-UNIT is missing ONLY when I click on 'Check' button from Item detail page above.
Is there any steps missing in config, or otherwise?
Many thanks.
Best regards,
PatrickHi Muthu,
Thanks for following up.
There is no 'Incomplete PO status', and what I can see in History is that (there are two line of messages):
- First message, "Follow-on Document Created";
- and second message, "Error in Process".
I have checked tcode CUNI (under Unit of measurement button with No Dimension from drop-down menu), UoM 'PAK' is exist with the following info:
- Internal Measurement Unit = 'PAK'
- Commercial = 'PAC'
- Technical = 'PAC'
- ALE/EDI --> ISO Code = 'PK' with Primary code checked
with the above, the Catalog Item's UoM is "PAC", when it comes to BAdI BBP_CATALOG_TRANSFER, table CATALOG_CONTENT has the UoM ISO code of 'PK', which mapped from Commercial 'PAC' based on CUNI config.
If I removed my code (bespoke table mapping) in the above BAdI, Internal UoM "PAK' is being picked up. When it returns to Shopping Cart, PO is still managed to be created.
Do you have any idea on this?
Many thanks.
Regards,
Patrick -
Batch specific unit of measure in process order
Hello,
I have a BOM with a component with active ingredient.
Batches are classified and transaction MMBE shown stock correctly in both units.
But when creating the process order I get two items with same item numer in the material list.
One for batch specifiv unit of measure which is fine.
I also get another line in the base unit of measure.
In table RESB both records have movement allowed so they show up in MIGO.
This increases the total requirements for the component.
What is happening??
Best regards,
TOrThanks for caring!
As for transaction MMBE it all looks fine. So basic definitions must be OK up to that point.
I think the point is to set requirement for the amount of active ingredient.
Do the batch determination for this.
Do the goods issue in physcial quantity which is the base unit of measure.
I did try now with KG in the BOM. I still get double items in the process order. Now both in KG.
One line is correclty copied.
The incorrect line which is the same in both cases says 1 KG. which is the correct conversion from 0,01KAI.
Regards,
Tor -
Converting Unit of Measure (not quantity)
Hello All,
I have an interesting issue that I am not sure how to address. I have done some searching online and through the forums on how to convert unit of measure. Nearly all of the returned entries pertained to converting FT to LB, and scenarios like that.
My issue deals with the data in the EORD table. I created a custom program to create/update numerous source lists using a BDC for transaction ME01. This way the user can enter numerous materials and plants into one program one time, rather than create each source list individually. One such source list has a value in field MEINS as GAL (Gallon). However this is the converted value, this can be viewed in SE16n. If I use SE16, or debug the program, I can see the value in MEINS as GLL. This is the unconverted value. Thus when I create the source list I get an error.
I was wondering if there was a function module I could use to convert the UoM. I know I could create logic to check the value of UoM and if it is incorrect to change it using a custom FM or even in the logic of the enhancement itself. But this could change over time, meaning more units could be added requiring more logic changes. If there was a standard FM I could use, I could implement it once and be done with it.
So does anyone have any advice or know of an FM I could use? I will continue to search for an answer and if I find one I will post. If my question is confusing please let me know and I will clear up anything I can.
Thanks for your help in advance.
Regards,
C.There is a conversion exit on unit of measure, "CUNIT" (via table T006A) use
CONVERSION_EXIT_CUNIT_INPUT Conversion exit for commercial (3-char) measurement unit INPUT
CONVERSION_EXIT_CUNIT_OUTPUT Conversion exit for commercial (3-char) measurement unit OUTPUT
Regards -
hi all,
I have a question related to finance.I want to populate the periodic unit price to ZPUP condition tables..in se12 i dont find any table with the name ZPUP.
so can anyone tell me what is the sap table where the periodic unit price will he stored for the material /plant combination.
points wil be rewarded ...your help is appreciatedHi,
MBEW : Material Valuation (Transpatrent Table)
the field name is
VERPR Moving average price/periodic unit
price (CURR 11.2)
Reward if helpful.
Regards,
Karthick. -
Formatting metrics in a pivot table differently based on a unit of measure
I have a generic metrics table with columns for METRIC NAME, UNIT OF MEASURE, ACTUAL VALUE, BUDGETED VALUE, and PRIOR YEAR VALUE. Each metric has a unit of measure associated to it, and I need to be able to format these metrics differently in the same field based on that unit of measure.
For example, I may have an actual value for a "cost per unit" that needs to be formatted in dollars to 3 decimal places (Unit of measure = USD3) while another metric may be a simple "number of items" that needs to be formatted as numberic to 0 decimal places (NUM0).
Has anyone ever formatted the same column in OBIEE with different data formats depending on the unit of measure needed? I know I can conditionally format the cell with colors or images, but I haven't figured out how to change the data format in a table or pivot table.Hi,
I've read all the tips that are offered in this forum. I tried all the solutions provided here, but I can not get the grand total formatted conditionally, what I get is the following error nell'answer:
DXE compiler error. No table 'GTGT' found in DXE. Source name: DxeAPI. XML: None
Error details
Codici di errore: YV3KVTDM
Location: saw.hypercube.dxeApi, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
I'm use the version: OBIEE 11.1.1.6.2
Anyone have any ideas for me?! -
How to retrieve the values from a table if they differ in Unit of Measure
How to retrieve the values from a table if they differ in Unit of Measure?
If no data is read
- Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
If no quanity in result internal table
- There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
- - Remove the CORRESPONDING, so quantity will fill the first field adqntp1. ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
- - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
* Fill the internal table
SELECT msehi adqntp
INTO TABLE internal table
FROM lipso2
WHERE vbeln = wrk_doc1
AND msehi IN ('KL','K15','MT').
* If required move the read quantity in the appropriate column.
LOOP AT internal_table ASSIGNING <fs>.
CASE <fs>-msehi.
WHEN 'K15'.
<fs>-adqnt2 = <fs>-adqnt1.
CLEAR <fs>-adqnt1.
WHEN 'MT'.
<fs>-adqnt3 = <fs>-adqnt1.
CLEAR <fs>-adqnt1.
ENDCASE.
ENDLOOP.
- You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
Regards,
Raymond -
" Unit of measure ****** is not defined; check your entry in table T006
I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.
Hi Itzell T,
While creating the material the unit of measurement which is entered is not existing in the SAP System. The unit of measurement entered during creation of material is cross checked from enteries of check table T006.
So, functional consultant should take care of this issue just let him know the message.
He know what problem actually is and fix the problem as Ankur had said. -
Condition extension unit-of-measure in pricing of shipment cost
请问scale中有一个 Calculation Type = C,这个是如何使用的?
Quantity that the amounts or percentage rates of the linear proportional rate refer to, which is created when the condition records are maintained.
其中的 the linear proportional rate 的计算公式是什啊?Test once by using your own custom condition table.
Create a condition table for the fieldCatlg Vendor, Material, Oder Unit etc (as per your requirement)
Then rest of all as per your settings. Then you can maintain the condition record as per order unit.
For more about create condition table refer to the blog Pricing procedure Steps and Details in SAP MM -
How to model a conversion table for unit of measures?
Hi
I am looking for some input on how to model a many-to-many relationship.
The situation:
A fact table with columns:
Product
Unit of Measure
Date
Value
1 product is stored with 1 and only 1 unit of measure - e.g. Product = Oil, unit of measure = m3
The fact contains several products, each having its own unit of measure.
A dimension 'Unit of measures' with columns
Unit Of Measure
Unit Of Measure Name
Measure System
While reporting on the facts it should be possible to chose the unit of measure I want to see my facts in. E.g. I want to be able to show Oil-production in m3 or barrels or liters, etc.
My challenge:
How to model this requirement?
Right now I tend to go for a bridge table between the fact and the dimension.
But I was wondering:
a) are there other ways to model it
b) are there pitfalls in using Bridge tables?
c) Can I re-use the bridge table in combination with other facts as the model grows?
c.2) do I need to create an alias on the bridge table to re-use it?
Thanks for your help
regards
AndyHi Kart,
ok let's say my model looks like this (columns below the tables names, sample in brackets) - again ignoring a date dimension:
Dim_Product --- 1:n --- Fact ----- n:1 ----- Dim_UOM
Id (1,2) Prod_id Id (1,2,3)
Name (Oil, Gas) UOM_id Name (m3, Barrel, Litre)
Value
So the products are coming from the Dim_product, Unit_of measures coming from Dim_UOM.
Fact values would look like this
Prod_id UOM_id Value
1 1 10
1 2 84
1 3 10000
etc
If I need to report in a new measure, I would be forced to add a new record to the fact table
Prod_id UOM_id Value
1 1 10
1 2 84
1 3 10000
1 4 150
with 4 being the new measure id.
What I am looking for is a way to be more flexible when it comes to converting values to different measures.
Thanks
Regards
Andy -
Material condition unit of measure not allowed
Hello Friends,
I am facing error of material XXXX condition ZPPL unit of measure SFT not allowed while creating the opportunity in CRM
Kindly note that I have defined a new UoM in ERP and for this new UoM the sales created perfectly in ERP, i have checked the netweaver settings for ISO codes and UoMs in CRM and they are fine...
Please help me with thisDid you ever find the solution for this? I am getting the same warning message and have no idea why it is defaulting 'ST'.
-
Table for alternative unit of measure
HI
I have created a material whose Basic UOM is Kg
I have maintained alternative unit of measure as TON and maintained the relationship 1 ton = 1000 Kg in material master -- additional data -
units of measure.
I want to capture the data for creation of report ....In which table this data is stored ?
Thanks
SaraMARM
-
Hi
I want to procure same material from same vendor for different plants with different unit of measure.I tried maintaining different unit of measure in inforecord but it is not posible...
How to maintian differnet unit of measure with plant level for same material..
kindly need your inputs
-Prabuhi,
soory for delay,
to create condition table and assigning to access sequence go to
spro-mm-purchasing-condition-create contion table(in this create table in 900 ser.and enter. then double click on field u wnt eg. pur.org plant etc and then generate the table)-then go to acc. seq. in that go to change and assign that con. table before the info record table i.e. if info record acc, no. is 20 give earlier no. which is available and save it .
then go to MEK1 t. code u will get the pop up in which u will get u r combination ok.
Maybe you are looking for
-
Adding a 3D sphere onto a 3D cube
Hi, currently i have created a 3D cube and was thinking to create a 3D sphere so that the sphere can stay onto the cube. And so when the cube is being rotated, the sphere that is on the cube will move according too. Can any1 show me the code to creat
-
Reading Weight from Weigh Bridge....
Hi. The scenario here is that we have to create module pool for picking up the weights of trucks from weigh bridge ( AVERY brand ). The existing system is in foxpro . Please find attached the text of AVERY guidance which exhaustively shows how the fo
-
IPod is disabled for long time..help!
So I haven't turn on my old ipod 4gen for over a year since I got my iphone 5 but recently my younger brother asked for it so i decided to turn it on and let him keep it. When I did I noticed my ipod has been disabled for 23,038,292 minutes. I cannot
-
"Action Keys" mode turns itself back on after waking from sleep
Hi gang, I've recently bought a Folio 13, and have disabled "Action Keys Mode" in the BIOS so that the function keys work as expected. However, if the machine goes into sleep mode, the function keys revert to their default behaviour (that is, I have
-
Regarding OSM Studio Installation
I had installed OSM design studio plugins in eclipse (version 3.3.0), it is installed without any error but the Studio option is not displayed in the main menu of eclipse. What might be the reason for it? Please help regarding it.