Unit of Measure missing in Shopping Cart

Hi all,
Currently, we have implemented BADI BBP_CATALOG_TRANSFER to map Unit of Measure from z-table, based on shopper's backend system. The mapping is done successfully when it return to Shopping Cart (e.g. PAC (catalog UoM) -> PAK (backend system's UoM)).
When I am at "Step 2: Shopping Cart", I've tried to view Item details (click on Magnifier icon in 'Action' column), and I noticed that mapped UoM 'PAK' is still there. However, when I click on 'Check' button, I found that the following error message returned:
"Enter a unit of measure"
I am wondering why UoM will be missing, and I notice that when the time I click on 'Check' button, it went through to BADI BBP_DOC_CHANGE_BADI of Method BBP_SC_CHANGE. I have checked import table IT_ITEM and found out that IT_ITEM-UNIT is missing.
Although I have put an breakpoint in Method BBP_SC_CHANGE, I discover that IT_ITEM-UNIT is missing ONLY when I click on 'Check' button from Item detail page above.
Is there any steps missing in config, or otherwise?
Many thanks.
Best regards,
Patrick

Hi Muthu,
Thanks for following up.
There is no 'Incomplete PO status', and what I can see in History is that (there are two line of messages):
- First message, "Follow-on Document Created";
- and second message, "Error in Process".
I have checked tcode CUNI (under Unit of measurement button with No Dimension from drop-down menu), UoM 'PAK' is exist with the following info:
- Internal Measurement Unit = 'PAK'
- Commercial = 'PAC'
- Technical = 'PAC'
- ALE/EDI --> ISO Code = 'PK' with Primary code checked
with the above, the Catalog Item's UoM is "PAC", when it comes to BAdI BBP_CATALOG_TRANSFER, table CATALOG_CONTENT has the UoM ISO code of 'PK', which mapped from Commercial 'PAC' based on CUNI config.
If I removed my code (bespoke table mapping) in the above BAdI, Internal UoM "PAK' is being picked up. When it returns to Shopping Cart, PO is still managed to be created.
Do you have any idea on this?
Many thanks.
Regards,
Patrick

Similar Messages

Vendor missing in Shopping Cart

Hi all,
Now, in SRM Shopping Cart, I have a issue that when screen returns to Shopping Cart from External Vendor Catalog, and when I click on Item Details (click on Magnifier icon in 'Action' column), it brings me to Item Details page, where I can see Basic Data, Cost Assignment, Documents and Attachments, Ship-To Address/Performance Location, and Sources of Supply / Service Agents.
I notice when I click on Sources of Supply / Service Agents, there are messages return:
No vendor assigned
No vendors/contracts/info records exist
I have done the config for the vendor in the following path in SRM, for my External Vendor Catalog:
SPRO --> Supplier Relationship Management --> SRM Server --> Master Data --> Define External Web Services
where, I assigned Vendor Number 90000987 as BP Number in Source of Supply Assinged to Product Catalog.
I am wondering why Vendor No. 90000987 is missing during the transfer to shopping cart. Due to this, I have checked BADI BBP_CATALOG_TRANSFER, method ENRICH_ITEM_DATA, table ET_SC_PARTNER, and I found entry for Vendor Number 90000987 is in the table with Partner Function '00000019'. I bet there is nothing I can do in BADI BBP_CATALOG_TRANSFER.
Another BADI BBP_DOC_CHANGE_BADI, which triggered after BADI BBP_CATALOG_TRANSFER, and I found that table IT_PARTNER of method BBP_SC_CHANGE does not contain any entry for Vendor Number 90000987 with Partner Function '00000019'. I have tried to place a breakpoint there and append entry for Vendor Number 90000987 manually in debugger, surprisingly, the Vendor is showing now.
Do you have any idea of which area (config or etc) I have missed out to cause Vendor Number 90000987 being excluded in tale IT_PARTNER of method BBP_SC_CHANGE in BADI BBP_DOC_CHANGE_BADI?
Many thanks for your help.
Regards,
Patrick

Hi Muthu,
Thanks for your info, I have resolved the Vendor Missing issue, and this is due to Business Partner GUID. I have matched back the appropriate GUID and now the vendor is appeared.
However, I have another post, but this time it's UoM issue
Unit of Measure missing in Shopping Cart
Not sure whether you have any idea on this.
Thanks and best regards,
Patrick

Unit of measure missing for LagDuration in ES for Project Network Activity?

Hello,
I just tried the Enterprise Service "Read Project Activity" (ProjectProcessingManageProjectIn) from ESM ERP 604 in the ES workplace. The field LagDuration in the NetworkRelationship consists of only a number, but no unit of measure. I changed the unit from Hours to Seconds via the Web Portal and watched the results of the Service: the number did not change although one hour should result in different lag time than one second. IMHO the unit of measure is missing in the service definition. Or am I getting something wrong?
Regards,
Uwe.

It is even worse: There are several duration fields in the "Manage Project In" Service Interface (e.g. Activity BaseDuration). In the responses these fields always contain a naked number (no unit of measure). In the WSDL these fields are of type "Duration" which has a pattern restriction of "PnYnMnDTnHnMnS" - not an int type! In a request if you pass e.g. "PT20M" (which is a valid Duration according to the samples) you will get a nasty parse error. Can anybody explain? Has anybody worked around this issue?

Download of SRM Contracts in Excel - Unit of Measurement Missing

We are using SRM 5.0 in Extended classic mode.
I downloaded the SRM contracts in Excel. One field that is missing is the Unit of Measurement at the Item Level (On the Basic Data Tab). Anybody having any clue how this can be taken care of ?
I tried both individual download and bulk download.

Hi
Please go through following SAP OSS Notes which will help ->
Note 859049 SRM 5.0: Restrictions for uploading and downloading
Note 673479 - Excel download: Quantities not displayed correctly
Note 790860 - Frequently asked questions for Excel upload and download
Note 734946 - SRM: Restrictions for upload and download
Note 812884 How to change the fields used for Excel Up- and Download
Note 673479 Excel download: Quantities not displayed correctly
922328 Upload: Product category change is not checked
921258 Upload: Old name displayed after changes to the partner ID
921302 The scales of cond is not arranged in proper order in excel
876176 Mass upload: Terms of payment not accepted
813114 Missing parameter in BAdI BBP_PD_DOWNLOAD methods
810646 Excel upload & download: Incorrect partner type in download
809437 Problems uploading and downloading documents
741837 SRM Upload & download: Conversion of amount fields
734946 SRM: Restrictions for upload and download
Note 653283 Contract: Excel sheet does not open in separate window
Note 641621 Language of the product description in contract items
Regards
- Atul

Unit of Measures missing in Crystal XI

Crystal Reports XI fixpack 3.2.
I'm designing a crystal report that contains a distance field with a measurement and unit of measure. In bex the value displays correctly,eg. 104,000 KM. In crystal I have three options for my key figure: Value, formattted value and Unit.
The value field contains 104,000, the formatted value contains 104,000 KM and the Unit field should contain "KM" but it's empty.
I don't get anything from unit field for any of my data rows (about 100 rows returned).
Do I need to make some setting adjustment or something? Any and all suggestions are welcome.
Thanx,
er

Upon further review I noticed that the Unit dimension is being correctly populated when the value is a monetary amount. For example $100 CAD, the CAD is populated in the Unit dimension for this key figure. The distance measurements (all KM) don't have anything.
The UOM is present in both key figures in the bex query when run in Bex Analyzer.

Default Unit of Measure in Shopping Cart

Hello Experts,
I am implementing SRM 7.0 Extended classic Scenario with SAP ECC6.0.
When creating a Shopping Cart for Free Text items, in Employee Self-Service of via the Professional SC, the user systematically has to select the Unit of measure he wants to use (unless he has defined his own defautl value with right click > Set current value as default).
Is there a way in the system to define a default ordering Unit of Measure for the Shopping Cart for every user ?
I searched the organization attributes (PPOMA_BBP), the user parameters (SU01), but I could not find a way.
Thanks in advance,
Sofiane

Unlike currency, which is usually fairly static for a company/user/system, unit of measure usually varies from one document to another, if not one item to another frequently. Therefore there is no per user default for this field by standard. However, you could enhancement the relevant webdynpro view, e.g. /SAPSRM/WDC_DODC_SC_I_BD, (method WDDOINIT) to default the unit of measure that way on the UI.

One line item missing from PO created using Shopping cart

Hello Team, we have raised a shopping cart with 6 line items, having the same vendor and account assignment details. Once the shopping cart was approved the PO was created but the 3rd line item was missing in the PO. When we checked in BBP_PD, the 3rd line item is still showing as item in transfer process. Can anyone please throw some light to this issue. All the line items were approved.
Thanks.
Richa

Hi Richa,
Is there any error in RZ20 for that shopping cart?
Best Regards,
Bharathi

Shopping cart line items are missing while transfering from ITS to EBP

Hi everyone
I am Raghu, working on EBP (version 2.0)
Some shopping cart line items are missing while transferring the shopping cart data from ITS to EBP.
For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are getting updated for all the shopping cart related tables except account assignment table.
In account assignment table for this particular shopping cart only 3 items are updated and usually the first line item gets missed out.Hence the the system fails to create the follow on documents in R/3.
This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
I have debugged entire scenario,but couldn't find the cause for this..
Can any one please advise me....why this is happening?
Your immidiate ersponse will surely help me a lot.
Thanks,
Raghu

Hi Yann
Thanks for your support.
Yes, we are using EBP2.0/CRM 2.0C & the support pack level is SAPKU20C23.
Please advice
Thanks
Raghu

Shopping cart not emitted to the right manager cause change unit

Hi guys,
We did a shopping cart , unfortunately the manager assigned is not the good one , the status is 'Awaiting approval' ,the requester is not linked to the same unit of the manager's one.
We would like to redirect his shopping cart towards the good manager linked at least to a different unit.
The requester has changed unit.
Is it possible for a given manager not related directly to the requester to redirect the shopping cart he is not the recipient to another manager in his own workplace.
Thank you in advance for your answer.
 Best regards Mahmoud

Hi Mahmoud,
If you are using a BAdI - BBP_WFL_APPROV_BADI then incase if your workflow doesn't find any approver, you can append APPROVAL_ADMINISTRATORS table.
In this way, you are direct your SC to administator's approval.
Your code will like this -
IF approval_table[] IS INITIAL.
if no approver found because send sc to default administrator
ls_approver-approval_index = actual_approval_index.
 ls_approver-approval_agent = 'USMAHMOUD'.
 ls_approver-name = 'Mahmoud Mahmoudi'.
 APPEND ls_approver TO approval_administrators.
 ENDIF.
ENDIF.
Please reward few points, if you find this useful.
Regards.
Pras

Base unit of measure Box is missing in SAP 4.7

Dear Group members
Base Unit of Measure "Box " is not in my SAP System 4.7
Dear Group Member
I am not finding "Box " Base Unit of Measure in my system
My system is SAP 4.7
You suggestions will be appreciated

Go to CUNI Tcode
and select the existing any UOM which is proximate to Your BOX unit of measure.
and Copy it as and Name it BOX
OR
Creation New Unit of Measure
Use transaction CUNI t create UOM
Here click UOM & then in the next screen click create icon in the top.
Steps,
1: use CUNI tode create Dimension give Dimension text and unit
2: create a IS code
3. in unit of measure option give commercial and technical information
I hope that this will help u for create unit measure

Missing print preview icon in Shopping Cart status srm 5.0

Hello,
Some users don't have the print preview icon in the shopping cart status.
I checked attributes and authorization, but that isn't the problem as far as I can see.
b/c some users have this problem and others don't I don't have any idea what the problem might be.
every idea is welcome!!
thanks in advance
Jan Holland

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Officejet 8600 missing parts of online shopping cart orders I receive

My new networked Officejet 8600 is selectively printing parts of an online shopping cart whose orders I print out. The order shows perfectly in the 'preview screen" but certain parts of the order, such as the city, are blank spaces.
Also, when testing other online pages, they come out fine. Don't know what to do! Please help. The shopping cart company blames the printer.

I found and corrected the issue.
A BADI Enhancement Spot ME_PROCESS_PO_CUST was implemented. The Method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM was modified within this Implementation. The focus of this upodate was to Modify the ROUTE information within the SHIPPING information in the PO Update Process (PTV Internal Table within ABAP SAPLMEPO). Unfortunately, the ultimate update of this internal table destroyed the UPDKZ indicator, which signifies when the EKPV record is to be created ('I') or updated ('U'). The update ultimately did not create the EKPV record.
Once this METHOD and the above SAP Enhancement (MM06E005 - EXIT_SAPMM06E_012 - ZXM06U43) were corrected, an STO Modification (creation of a new Item) ALWAYS creates a Shipping Tab (EKPV record).

Shopping cart missing

Hello All,
We have got an issue with one of the shopping carts.
After sourcing, shopping cart did not flow to requestor. I have checked in SWI6, monitor shopping cart, BBP_PD and SWI1; it show as "cart with requestor". I also checked in users queue in SWI5 but it is not there.
i tried to find the cart with work item id in BBP_PD, but it was no help.
Please help in fixing it.
Thanks in advance,
Muzammil

>
muzamil24 wrote:
> Hello Muthu,
>
> In an ideal scenario, our flow will be as below:
>
> 1. Requestor creates the cart
> 2. Cart goes to Buyer for Sourcing, Buyer does sourcing and saves the cart
> 3. Cart goes to requestor again. Requestor should save the cart now. (Requestor should approve the cart here in approval screen)- now REQUESTER can view his cart but requester can not edit the cart since cart is in PURCHASER WORK LIST
> 4. Approval flow will start after the Requestor saves the cart - After approval only the cart goes to the cockpit
> 5. SRM PO will be created after approval flow is completed.
>
> Now, in this issue the cart did not come from step 2 to step 3.
>
> System says that Buyer did sourcing (I have checked in Monitor shopping cart and sourcing is done correctly) and saved the cart. But the cart did not flow to requestor now.
>
> Hope i am clear now.
>
> Thanks,
> Muzammil
>
> Edited by: muzamil24 on Oct 2, 2010 12:59 AM
1. sc created
2.approver approves the cart
3. upon sourcing configuration
4. sc available for sourcing for BUYER
5. Buyer assign source of supply
6. BUYER creates a PO.
REQUESTER control till manager approves.
Hope you understand now.
BUYER COMPLETES A CART MEANS IT CAN NOT BE SOURCE AGAIN.
Muthu

Shopping Cart TabStrip is MIA (missing in action)!

The shopping cart tabs have all disappeared and I cannot find the control to bring them back!!
Details
When you logon to the SRM portal and go to the Shopping Cart (Employee Self-Services tab) you are shown two icons: Shopping Cart and Advanced Search. Under those two icons is a tab-strip with five tabs: 1) Shopping Carts; 2) Confirmations; 3) Invoices/Credit Memos; 4) Team Carts; and 5) Confirmations for Team Carts. If you right-click on any one of the tabs the context menu that appears has three options: 1) User Settings; 2) Display Quick Help; and 3) More Field Help. Upon clicking on the User Settings option you have two more options: 1) Hide <current> tab or 2) More Settings. Under the More option it brings up the complete tabstrip control window allowing you to add or remove any of the five tabs. However, there is also a link to "Hide Tabstrip Control." If you click this "link" it actually removes all of the tabs and you can no longer access anything.
I have deleted the UserID and recreated the UserID and the tabs remain hidden.
Please help!!

Michael, thanks for your idea. I have tried that but right clicking on all other objects on the same page only shows the IE context menu (see below). I can actually still see varied screen shading (darker blue on a light blue background) where the tab strip was located. But if I click on another link, e.g. Advanced Search, and then right click on one of the fields on the subsequent form I do find a User Settings option. However, upon selecting the the "more" option it opens a new window that looks similar to the one for the tabstrip but it is specific to the field I right-clicked on located on the subsequent Advanced Search form. Each of these right-clicks will allow me to "hide" the button or field that was right-clicked on. I dare not do this as these fields will most definitely be "lost" to me as well. thanks for any help you can offer.
Open
Open in New Window
Save Target As
Print Target
Cut
Copy
Copy Shortcut
Paste
Add to Favorites
Properties

Shopping cart History as a Graphic is missing

Hello,
We have installed some hot packages in SRM and ECC and from then I have lose the Shopping cart history as a graphic. I have it only as a table.
Someone know how to resolve this?
SRM 5.5 ECC6.0
SAP_ABA SAPKA70012 Cross-Application Component
SAP_BASIS SAPKB70012 SAP Basis Component
SAP_AP SAPKNA7009 SAP Application Platform
SRM_PLUS SAPKIBK009 SRM_PLUS for mySAP SRM
SRM_SERVER SAPKIBKT09 SRM_SERVER
Cheers,
Marta

Hi
Also try to check out and then Implement
SAP Note 1028482 [Approval preview: Tabular display instead of applet]
To view the Preview in the graphic form you need to install JRE 1.5 on your PC.The mentioned notes need to be seen only if you getting any error in the Graphical view.
Related links ->
Graphic diplay is not working for Approval Preview & Shopping Cart Status
Graphic format vs. tabular format
Do let me know.
Regards
- Atul

Unit of Measure missing in Shopping Cart

Similar Messages

Maybe you are looking for