Unity7 message monitor

Hi,
I'm upgrading a customer from Unity4 to 7. He is interested by M/essage Monitor feature.
Unity is deployed using G729 40ms because of WAN and IP Telephony Service Provider requirements.
Does Message Monitor work with G729 40ms ? Does XML RTPRx fonctions support G729 40ms ? 
On 79x1 phones I can hear a noise and on 79x5 phones I do not hear anything.
If not I have a problem I have to re-install Unity7 in G711 and CAC will not be aware of this bandwidth consumption and theese RTP flows will not use transcoding ressources..
Thanks for help
Guy

Hi Guy,
According to the most recent information I've been able to find, Message Monitor will still only work with 20ms G.711 packets due to a limitation in the RTPRx feature on some IP Phones.
Was there any difference in behaviour if using Remote Message Monitor?   Some people seem to have got this working with G.729; although there is at least one defect raised against it (CSCso77846).
Has the entire CUCM cluster been reconfigured to use G.729 in 40ms packet sizes instead of 20ms (using the "Preferred G.729 Millisecond Packet Size" CallManager Service Parameter)?
Unity should work fine with both G.711 and G.729 without re-installing.   It can be configured to work with only G.711, or with both G.711 and G.729 from within the Advanced Settings Tool (with "Audio - Enable G729 codec support").
Kind regards,
Craig Cooper

Similar Messages

  • 'System Error' status at Message Monitoring( HTTP to FILE )

    I have created a scenario HTTP to FTP. I sent message to XI server using the HTTP Client.
    After sending the message I am getting the response at browser.
    Result:
    http-Status:  200 Message accepted
    Payload:
    But when I look in to the Message monitoring at RWB, I am getting the message status as
    System error. while going to the details i can see below error category.
    Error Category       MAPPING
    Error Code      EXCEPTION_DURING_EXECUTE
    (Is the password different for port 50000 and 8000)
    Please help me to solve this issue.
    Thanks in Advance,
    John

    This is the trace message that I got for this error
    <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>
      <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46)</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:72) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>

  • System error in message monitoring

    Hello,
    Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is  In audit log of message details as belows:
    JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression 
    I should resent this message content. When i press Resend tab  in message monitoring, error status is not being changed.
    Thanks in advance

    Hi,
    Check the payload received is correct or not in this case ...
    Take payload and check at mapping level...
    if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
    HTH
    Rajesh

  • Message details not getting displayed in Message monitoring of RWB

    Hi,
    I am trying to see how many messages in Message Monitoring by selecting Integration Engine option, Message counts are getting displayed like how many has been processed successfully,processed with errors as well.
    When I click on message count a pop up screen opens and gives me no messages are not available even for the same day messages.
    Can any body give me an idea like where i can set any parameter to display in detail of messages in integration engine for one week back as well.
    Thanks...

    >When i click on count of messages which got processed with in one hour then it shows details of that messages, but when i select other messages which got processed on the same day but more than one hour then its not displaying any details of the messages.
    I guess in this case your retention period is set to zero in SXMB_ADM. And this is the reason you cannot see the message even if they are an hour old.
    >Is there any where where we can set parameters or any oss note to be implemented in order to see details of any messages with in a week or 10 days.
    In XI run tcode SXMB_ADM and then follow "Integration Engine Configuration ---> Specific Configuration". Now check the Archive & Deletion Current & Default Values and set the Retention period as per you need.
    For more information see page 11 of this document.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true

  • How to delete the messages in message monitoring

    hi all,
    can anyone tell me is there any way to delete the messages in message monitoring.

    Hi,
    Please Refer these Blogs
    /people/prasad.illapani/blog/2007/03/08/performance-tuning-checks-in-sap-exchange-infrastructure
    /people/prasad.illapani/blog/2007/04/20/performance-tuning-checks-in-sap-exchange-infrastructurexi-part-ii
    /people/prasad.illapani/blog/2007/04/27/performance-tuning-checks-in-sap-exchange-infrastructurexi-part-iii
    <b>Reward Points if Helpful</b>
    Regards
    sasi

  • How to delete the error message in the Web page Message Monitoring

    Hi All:
    I'd like to ask a question.If there is error message in the T-code sxmb_moni->Monitor for Processed XML Messages,I can cancel the error message manually and archive the message. After that,I can delete the message from "Monitor for Processed XML Messages".
    But after those operation,I find in the web page " Message Monitoring", there are still messages in the "Messages from Component Integration Server and/or Adapter Engine".
    How can I delete those message both successful and error.
    Thanks All
    Elliott

    Hi Elliot,
    SXMB_ADM
    Integration Engine Configuration
    Specific Configuration
    Category: DELETION
    Parameters: PERSIST_DURATION, PERSIST_DURATION_ERROR
    Subparameters: SYNC, ASYNC
    Change "Current Value".
    and execute your delete job again!
    Regards,
    Udo

  • Message monitoring Status Waiting for email receiver

    Hi Guru,
    Scenario:  SAP ECC will call Error Handling interface class. The communication channel for the Error Handling interface is Email Adapter.
    Below is CC setting:
    Adapter Type: Mail  (Receiver)
    Transport Protocol: SMTP
    Message Protocol: XIALL
    Adapter Engine: Integration Server
    URL: smtp://11.11.11.111/
    Check - Configure User Authentication
    User : user1
    Password: password
    Mail Attributes:
      From: [email protected]
      To    : [email protected]
      Subject : test
      Content Encoding: base64
    I encountered one problem where my email receiver status in message monitoring is always 'Waiting'. I do not know what went wrong in the setting? Does anyone know how to solve my problem ?
    Thanks in advance.
    Regards

    XI tries 3 times before changing the status of the message to System Error. One can Manually resend the error messages by using the RESEND button in RWB. In scenarios where XI was trying to send the message to an end system that was down for maintenance, you would want XI to resubmit the message automatically without human intervention. What would be nice is to able to tune the retries like IS_Retry which is available for Integration engine.
    We can achieve this by changing the retry count used by the Adapter Engine, by default its set to 3 times, 5 minutes apart. This count can be changed in Visual Admin->server->services-> SAP XI Adapter: XI.
    Here  change the number Retries parameter from 3 to 10 and change the retry retryInterval to around 10minutes. For these configuration changes to be picked up, restart SAP XI Adapter: XI.
    please visit the blog
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

  • System Error in Message Monitoring while it shows checked flag in SXMB_MONI

    Hia,
    We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
    (ECC -> PI -> Legacy CRM)
    I have following queries:
    1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
    2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
    Regards

    System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
    2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
    2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
    2010-05-10 13:15:05     Information     SOAP: completed the processing
    2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
    2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
    2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
    2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
    2010-05-10 13:15:06     Error     The message status was set to FAIL.
    I have already checked Data Structure and it is fine.
    Regards
    In this scenarios we are using XSLT mapping using CDATA.
    Please suggest solution.

  • Messages on Holding at Message Monitoring under Runtime Workbench

    Hello Colleagues,
    we have currently the problem that a lot of messages for some interfaces are in status Holding under Message Monitoring at Runtime Workbench for PI 7.1.
    I'm not able to resend the messages with status Holding as well as change status to cancel.
    Quality of Service for the Interfaces are Exactly Once in Order.
    I assume an error message blocks the queue and due to the fact we have Exactly Once in Order configured all following messages be in status Holding.
    Is my assumption right?
    But, I am not abel to find any messages in status error with blocks the queue!
    How can I solve that issue?
    Many thanks in advance!
    Jochen

    I assume an error message blocks the queue and due to the fact we have Exactly Once in Order
    configured all following messages be in status Holding.
    AE should have least number of EOIO messages at a given instance...otherwise Holding is what you get.....and holding is common with EOIO....so see if you can chagne the QoS of some messages to EO
    But, I am not abel to find any messages in status error with blocks the queue!
    Never you will get an error in SXMB_MONI....or the queue blocked....
    When your message goes out of IE...the corresposding message entry is marked with chequered flag...observe in MONI you will see this....however in AE the message can fail if not able to send to the target system....
    For some more understanding refer my answer in this thread:
    Re: Restarting Error's in SXMB_MONI
    Regards,
    Abhishek.

  • Stuck in To Be Delivered Status in Message Monitoring - Adapter Engine

    Hi,
    I have messages stuck in To Be Delivered status in Messages Monitoring. When i checked the Audito Logs, there are NO LOGS. I resent the message and now the logs indicated in the Audit Logs is:
    2014-03-26 08:39:10
    Information
    The message was successfully received by the messaging system. Protocol: XI URL: http://<host>:<port>/MessagingSystem/receive/AFW/XI Credential (User): PIIXXXX
    2014-03-26 08:39:10
    Information
    Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
    2014-03-26 08:39:10
    Information
    Message successfully put into the queue.
    2014-03-26 08:52:48
    Information
    Admin action: Trying to redeliver message.
    The connection between the receiver is ok, does this have something to do with the Communication Channels?
    Please help.
    thank you.

    Hi Eng Swee,
    there are messages that were cancelled yesterday and the status is 'Terminated With Errors'
    this is what is indicated in the Audit Logs
    2014-03-26 02:38:47
    Information
    Admin action: Trying to fail message.
    2014-03-26 02:38:47
    Error
    The message status was set to FAIL.
    2014-03-26 02:38:47
    Information
    Admin action: The message was successfully set to status failed.
    2014-03-26 02:38:47
    Error
    Asynchronous error detected: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Message failed by admin.. Trying to report it.
    2014-03-26 02:38:47
    Error
    Asynchronous error reported.
    Is this the reason why the messages are stuck?
    thank you!

  • Want to access Status in Message Monitoring

    Dear All,
      I want to get access to the Status Parameter in Message Monitoring so that depending on the Status(Waiting or Syste Error),I can set my logic and send a mail to the developer.
    I need help.
    <b>1. Where can I find out the Parameter for status in RWB Message Monitoring?
    2.Is there any method so that I can set some parameters and it will directly send mail to the developer or I have to use Mail Adapter and write my own scenario?
    3.If I am to develop my own scenario,then how to automate the whole process for each of the New messages?</b>
    Thank you in Advance.
    Sugata

    Hi Suresh,
    Thank you for your reply.But this is not what I wanted.In my RWB,there are different Message monitoring Status parameters and I want to get hold of that,to be more open,I want that status to come as Subject of my mail.For that reason I need the Status Parameter,and I need to put that in my mail.How to do that?
    Cheers..
    Sugata

  • Error in Seeburger Message Monitoring

    Hi ,
    I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
    I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.

    Really didn't understand your scenario. That sentence makes no sense:
    "I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
    But what I understand from the error message you have provided...................
    if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
    Under Parameters Tab:
    You must have set the following parameter
    MDN Mode = "ASYNC"
    And has not provided the following parameter just below it :
    Receipt Delivery Address
    This parameter should have value: the URL of your own AS2
    server where the asynchronous MDNs are
    to be delivered.
    Hope this solves your problem.
    Regards,
    Suddha

  • Message got struck in hold status in message monitoring.

    Hi SDNers,
                 I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
                 After repetetive attempts of restarting the message, still it is in hold status.
                 Even if I tried to cancel the message, it is not cancelling as it is in hold status.
                Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
    Regards,
    Jayaram.G

    Hi,
    If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
    Check queue status
    Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
    Check the status of the scheduler and the status of the XBQ* and XBT* queues:
    u25CF     Inbound qQueues
    XBTI* (ExactlyOnce)
    XBQI* (ExactlyOnceInOrder)
    u25CF     Outbound queues
    XBTO* (ExactlyOnce)
    XBQO* (ExactlyOnceInOrder)
    u25CF     Acknowledgment queues
    XBTB* (ExactlyOnce)
    XBQB* (ExactlyOnceInOrder)
    u25CF     Large message queue
    XBTL* (ExactlyOnce)
    If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
    If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case.

  • Message status "Holding" - Message monitoring adapter framework

    Hello,
    We have some messages with the status "Holding" in a queue in the message monitoring in the adapter framework.
    Normally you have to restart the first message of that queue. The message with the status "system error". Unfortunately this message is not available anymore because it is older than 30 days and the retetion period is 30 days.
    I already read the blog about "[How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1887311350DB01819286872323159351End?blog=/pub/wlg/3566]"
    The blog does not mention what to do when the first message (sequential number) is not available anymore.
    Is it possible to restart the messages in the queue in that case?
    Thanks
    Kind regards
    Frank

    Unfortunately this message is not available anymore because it is older than 30 days and the retetion period is 30 days.
    I assume that the message was deleted.....in this case the next message in the queue will be blocking the queue....so try resending this message....even the blog mentions that you either solve the error or cancel the message....so now start from the second message....if possible solve the error for this message....if not possible to resolve then cancel it so that rest of the queue gets processed
    From the blog:
    Now the erroneous message is the first message in the display. You can look at the error reason, try to fix the problem and
    resend or cancel the message to release the queue.
    Regards,
    Abhishek.

  • To Be delivered status in Message monitoring

    Hi,
    There are some messages in TO BE DELIVERED status in Message monitoring while selecting integration server. I could neither cancel nor resend.
    any input reg. this will be appreciated.
    I didn't see any messages with TO BE delivered status in adapater engine.
    I could able to clear What ever messages in system error status in adapter engine by filtering based on sequential id.
    I have seen this thread  & link also.
    To Be Delivered
    Re: "To be delivered" status in RWB -- Any solution?
    http://help.sap.com/saphelp_nw04/helpdata/EN/49/e3fb40ef74f823e10000000a155106/content.htm
    I could not see any entry in SMQ1, SMQ2, SM58 also
    Thanks
    Praba
    Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:02 PM
    Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:04 PM

    Hi,
    You cannot resend or cancell the messages which are in status "To Be Delivered". Check Receiver adapter File/Jdbc/ OFTP e.t.c. which is processing these messages.
    Check with your Basis team to remove the lock of adapters if any. Or to process these messages you require soft restart of Java stack.
    I had same kind of issue two days back with OFTP adapter messages and did soft restart of java stack with help of Basis team.
    Hope it will helps you
    Cheers
    Veera

Maybe you are looking for

  • Where on earth can i change resolution values/doc raster effects?

    Hi Guys and Galls, when importing a Bar Code i consistently get message that resolution for professional book printing is too low. (which results in text [print proof] overlaid on barcode, which obviously we don't want. when trying to save a piece of

  • Migration of code from one instance to another instance

    Hi OAF Team, i want to migrate the (OAF)code form one instance(test) to another instance(Dev), what is the procedure and how can i migrate from one instance to another instance. could you please solution for this. Regards, Muthu

  • CD Install doesn't work on Ultra 10

    I had a hard disk crash on an Ulra 10, so I replaced the disk with a new one, and tried to follow the directions in a Solaris 9 "getting started" manual: I put the installation CD in the CD drive and turned on the power. Instead of allowing me to ins

  • When will the new ios 6 released?

    I just wanted to know when will the new ios 6.x.x released..Last year ios 5.0.1 released less than a month after initial ios 5 release...I can't handle with these type of bugs....

  • Application Server, Message Server, Gateway

    Hi, Can anybody tell me which transaction in SAP gives me the details (Name and port) of the application server, message server, gateway server/service? Regards, Kishore