Universal cable + 10w charger doesn't work with iPad 1

I have a universal cable and 10w charger that works with my iPhone 4 and iPhone 3Gs, however my iPad 1 does not recognize it (as if it wasn't plugged in)

Hello marianaygreco,
Thanks for using Apple Support Communities.
To charge your iPad, please ensure you are using the correct adapter as is depicted below.
Identifying your USB power adapter
Picture
Agency marking
Name
Wattage
Works with…
Apple 10W
USB Power Adapter
10W
All iPhone models
iPad (3rd generation) and earlier
All iPad mini models
Apple 12W
USB Power Adapter
12W
All iPhone models
All iPad and iPad mini models
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Take care,
Alex H.

Similar Messages

  • Apple tv mirroring doesn't work with ipad 2

    Apple tv mirroring doesn't work with ipad 2 and last update achieved

    you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

  • Male to male audio cable for car doesn't work with my iphone 4s?

    I have a 3.5 mm male to male cable that I have used in my car so I can listen to my music.  It works fine with my iphone 3G, but it doesn't work with the new 4s.  Is there a special cable I need to use with it?  It's weird, because my earbuds work with either iphone, but not the audio cable.  Suggestions??

    I have the exact same issue with my new 4S.
    I haven't find a solution yet.

  • My FM transmitter and car charger doesn't work with my new iPod Touch.

    As stated in the subject, when I connect my new iPod Touch to the FM transmitter and/or car charger that I was using with my iPod video, it doesn't work. When I connect the transmitter alone, nothing happens and when I connect the car charger, a screen appears that says something like, "charging not supported with this device"
    Has anyone experienced these issues? Or does anyone know of a solution???

    I bought the new iPod Touch 3rd Gen 32Gb model on the day they were announced. This is my first iPod, but my wife already owned an iPod classic. I tried the car charger that we had bought for her older iPod and I too got a message something like, "charging not supported with this accessory".
    I saw the previous response and went out to shop for a new adapter. I found a Belkin kit that included the auto 12v power socket adapter that one can plug a USB cable into. The unit came with a USB cable that plugs into the iPod docking port. The kit also came with an AC home adapter with one USB port. My newer iPod charges just fine with both of these adapters.
    So I would agree with the previous post. The newer units need the newer USB charging adapter rather than the older basic 12v adapter.

  • HT4528 iphone 4 charger doesn't work with iphone 5

    I bought an iPhone 5 recently and discovered I cannot charge it using the iPhone 4 USB charger. I plug the Lightning cable into the new Apple USB charger that came with the 5 and it works. I plug it into my older 4 Apple USB charger (that looks 100% identical) and it doesn't work. iPhone 4 works on both.
    What the heck?

    Check the output on both chargers and see if there is a difference.

  • Universal Dock's remote doesn't work with iPhone Photos

    Has anyone tried Universal Dock's remote with iPhone Photos? I can't get it to work.
    The remote does work with iPhone music and video though.

    i just bought this dock as a car dock. I have it hooked up to power 12v and output to 1/8 into head unit. Now, I have to be in iTunes music to get it to work and it only allows volume, playing of files in a playlist and to next song. Are any of you guys having issues with VERY limited use of the remote and lack of really a benefit from using a remote because you have to touch it anyways to change through songs or video??? Are you guys wondering why you even bought it if the remote is not supported as a functional addition?

  • Ipod cannot be disconnected / old Ipod charger doesn't work with nano 3G.

    Hey,
    i have problems to disconnect my ipod nano 3gen. from itunes!
    It says that it cannot dosconnect the ipod because there are programs which use files on it. So how can i disconnect it savely? Can i use the windows hardware disconnect "tool"?
    +solved! it was my defragmentation tool...+
    My second problem is that an old ipod charger only works with ipod 5gen and ipod nano 2gen. but not with my ipod nano 3gen. Is there anything wrong with it?
    If so, which charger can i buy?
    I hope you can help me!
    Greetz
    Phil from Frankfurt!
    Message was edited by: gamerphil

    thanks for your help :P
    no answers?

  • Cable wont charge iphone but works on iPad. States it is not a supported cable

    My iPhone says that the cable is not supported but it is the original cable and my ipad charges with the same cable. Any ideas?

    Look for lint in the phone's charging socket.

  • Remote app doesn't work with ipad 2 and ios 7.0.3

    Hi to everyone!
    I have a problem with the remote app and my ipad 2 using ios 7.0.3
    If I try to add a song to "next songs" the app crashes. But it works fine on the iphone 5 with ios 7.0.3
    What could be the solution to solve this problem?

    there's been an update for the remote app, now all works fine :-)

  • Lightning to VGA adapter doesn't work with Ipad Air

    I have a Lightning to VGA adapter that I want to use with my Ipad Air and pc screen. When I connect it with my Ipad and the screen, on my ipad the blue bar appears but I don't get anything on my pc screen. I dit the same with my iphone 6 and that works perfect. Any idea what the problem could be?
    Both devices has IOS 8.3.
    Thanks in advance.

    I have a similar problem to blueskoi. I have a lightning to HDMI Connector which no longer works on my iPad Air, however it still works fine on my wife's iPad 4.
    The only difference I can find is that her iPad hasn't been updated to IOS 8.3, whereas my iPad Air has.
    Is anybody else experiencing the same problem, or am I missing something?
    I have done a full settings reset on my Air but that didn't resolve it.  I get the blue bar at the top of the screen and my TV Screen flashes, but then no signal appears,
    Any help would be most gratefully received.
    Regards
    Paul

  • My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

    My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

    Since there's no one side on a lightning cable, make an appointment with genius bar for an evaluation.

  • Official Apple Composite Cable DOESN'T WORK with iPhone 3GS firmware 3.1.2

    I've tried everything and I cannot make the official apple composite cable (MB129LL/B) work with my iPhone 3GS 3.1.2.
    I get no video output AND no sound as if the cable is simply not made for my 3GS
    What do need to do to get composite video output on my 3GS 3.1.2????

    "The 3GS will not work with a Composite cable. It will only work with a Component cable. See here: http://support.apple.com/kb/HT1454"
    I have had no luck with getting the component cables to work with my 3GS. They are the Apple branded cables, not some knockoff. I would be angry if I needed to buy the universal dock to get them to work. Per some of the forums I've read, it is not needed. Also, from all the reading I've done on the TV out feature in this forum and others, it appears to be a hit or miss whether it works or not.

  • My universal dock doesn't work with my iphone4s !!

    Hi, good day,
    My universal dock doesn't work with my iphone 4s, but it work with my ipod touch 4th gen. Its actually works on both of my device back then, and i din't use the dock for few month, now I can't use it woth my iphone. I did  restore both of my device but it still doesn't works with my iphone.
    So any solution to solve it??
    Thank you. ^_^

    Please explain.
    What does "cellcom line doesn't work with my iPhone" mean?
    What are you trying?  What is happening?
    Where did you buy the iphone?
    Any info abnout your issue at all?

  • IPod Stuff doesn't work with my new iPhone

    I finally sprung for the iPhone three weeks ago and I love it. But I think I'm going to have to buy more new stuff. Neither set of my portable speakers that I use with my iPod (5th gen. video) work with the iPhone. When I put the iPhone in the dock, I get some message about Airplane Mode. Music does play through the speakers, but they won't charge the iPhone. When I put the iPhone on its own charger and tried to use the auxiliary input on the speakers, there was only silence.
    Do I need a special cable or something?
    Also, my car charger for the iPod doesn't work with the iPhone.
    Am I going to have to spring for another set of portable speakers? I've read that the Pure-Fi is compatible with iPhone.
    Thanks!

    Both my mini and my video iPod were USB -- not Firewire.
    Both your Mini and your iPod with video synced via USB and charged via USB when connected to your Mac, but they also support charging via Firewire and most of the older 3rd party devices charged iPods via Firewire - your iPods include firewire pins in the connector for charging via firewire.
    The first generation iPhone also syncs and charges via USB when connected to a computer, and the first generation iPhone also includes firewire pins for charging via firewire also, as your iPods include. The first generation iPhone does not support syncing via Firewire, but it does support charging via Firewire.
    Apple removed the firepins from the iPhone 3G connector as they have done with all new iPods released after a certain date and for all new iPods to be released in the future. 3rd party device manufacturers were made aware of this so all new 3rd party devices must support charging via USB only or include charging via USB in addition to charging via Firewire if a new device is to be backwards compatible with older iPods.

  • My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

    My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.  I get an error message with multiple suggestions but none of them apply to my situation.
    I am so dissatisfied with this printer.  I'm sorry I got it from Amazon because now it is a hassle to return it.  I will never buy another Canon.
    The printer menus are confusing.  I hate using it.  I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model.  Never again.  Stick with cameras.
    Marcy Hotz

    This note won't be as angry and frustrated as the last one...
    Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer.  I deleted all the old stuff.
    I also had several scanning applications on my drive which just confused me.
    When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which).  So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
    It works now.  So I'm satisfied, will keep this maching.  I just had to take some time, sit down and focus on the problem.

Maybe you are looking for