Unix find - need nonrecursive solution

Hey got another UNIX question.
I'm on Unix, in SunOS 5.10
I'm trying to use the find command to pick off some target files, however, it traverses all subfolders
recursively. I realize I could just use an "ls" solution, however, I also want to utilize the -mtime option of
find (to pick off only files older than - for example - 4 weeks.)
So I suppose my bigger question is: "What's the easiest way to search a single directory for files older than a
given time (ie # of days), and not recursively search child folders?"
So first off, a test case:
mkdir test
cd test
touch abc.txt
touch abc.sh
mkdir dir1
touch dir1/abc.sh
cd ..
find ./test -type f -name "*.sh"
./test/abc.sh
./test/dir1/abc.sh
So here, I just want to return:
./test/abc.sh
Now doing some Googling, I found a few threads that mention some other options:
1) -maxdepth
   Tried this, doesn't seem to be there in my version of Unix/ksh
   find ./test -type f -name "*.sh" -maxdepth 1
   find: bad option -maxdepth
2) -xdev
   Only works on mount points, not a good/generic solution. (doesn't work for me, these aren't mount points)
3) -prune
   find dir $ ! -name dir -prune $ ...
   so :
   find ./test $ ! -name ./test -prune $ -type f -name "*.sh"
      (no results)
   find ./test $ ! -name "./test" -prune $ -type f -name "*.sh"
      (no results)
Any ideas?

sybrand_b wrote:
My big question is
Why are you asking off-topic Unix questions in a forum about Oracle RDBMS?
Sybrand Bakker
Senior Oracle DBA
Ah, I see what I did. I thought I was posting to a generic "General" forum, however, this is the "General" sub forum WITHIN the Oracle Database forum - my bad.
I know we had some areas on this site for other topics, (ie Java, Linux, etc), and I was trying to get to there, but it's the first time I wanted to post outside of Oracle topic - and I did it wrong. Sorry about that.
Is it possible to move this thread to this forum, perhaps? where it might be more "on-topic"?
https://community.oracle.com/community/developer/english/server_%26_storage_systems/solaris/solaris_10

Similar Messages

Can't find my Personal Hotspot after upgrading my iPhone 5 32gb to IOS8.1........ Please I need a solution.

I can't find Personal Hotspot after upgrading my iPhone 5 32gb to IOS8.1......I have searched everywhere and still cannot find it .. Please I need a solution.

Hi Rayhiggs,
Welcome to the Apple Support Communities!
To set up and use Personal Hotspot please use the attached article for the process. If Personal Hotspot is not showing as an option in Settings > Cellular, it may be necessary to contact your carrier as described in the article.
iOS: Understanding Personal Hotspot - Apple Support
Cheers,
Joe

I can't find ADP Mobile Solutions App when others can; help

several of my employees can find ADP Mobile Solutions App on their phone, but it won't show up on mine. It won't show up on my Apple MacBook computer or Ipad either. Does any know why Apps show up on some phones, but not others?

Hi..
If this is the app you are referring to > http://itunes.apple.com/us/app/run-powered-by-adp-mobile/id388928133?mt=8
You need to download and install it... same for your iPad.
FYi... apps that run on an iOS based devices such as the iPhone and iPad cannot run on a Mac. Two different operating systems.
Mac OS X vs iOS
edited by: cs

Adobe error (523:523) In version 10 - Need Alternative solution

When I am trying view Statements(PDF) which are encrypted in my application , for few statements it triggers " There is problem with Acrobat / reader. If it is running, Please exit and try again(523:523)". In few forums it has been stated that by turning off the protected mode at start up " Edit-->preferences-->general-->Enable protected mode at start up" resolves this issue. But the client doesnt want to turn off " Protected mode"due to security reason. Can any one help me with this?
FYKI :
I have got reply from Adobe forums ..
https://forums.adobe.com/message/6578512#6578512
The purpose of re- posting the same query is we need alternate solution other than Turning OFF Ënable protected Mode at start up.
Please advice me in this regard. Thanks a lot.
Regards,
Sreelatha Sekhar.Pat Willener

Hi Shakti,
Please find the details which you have asked me for.
1) I am the user of those encrypted files.
2) Windows 7 / Windows 8.1.
3) I am not opening the PDFs in Browser instead I am opening through the application in which Adobe Reader is linked to it to view the PDF files.
I have also updated to Adobe Reader 11.0.08. Still the problem persists.
Please help me in this regard. Thank You.
Sreelatha

Sharing is not pirating -- I need a solution

I used to be able to go to my vacation home and watch my home videos on my Apple TV or go to my friends house with my laptop and stream my photos to his Apple TV, but now I can't. My family of 6 can only share with 5 computers and we used to be able to stream from everybody's computer to our home theater. All the things we loved about Apple TV are gone. I am needing a solution.

It's not quite what you think...
The "new" Apple TV has no hard drive. The hard drive probably added close to $100 to the cost of the device. By removing the drive, they can drop the price to $99 and this will probably get more business from impulse-buyers who are willing to take a chance on a $99 purchase.
What the new Apple TV has instead of a hard drive, is 8GB of solid-state storage. But it really uses it as a filesystem "cache" for streaming. A single TV show episode might be 2GB. A movie is longer and thus bigger. If the 8GB storage was used the same way the original Apple TV used it's hard drive, it would be full after just a couple of movies or a few TV show episodes. So it doesn't make sense to use it that way. Hence as a "standalone" device, it can really only "stream" and that means you are "renting" from the Internet or streaming from another local computer running iTunes. But the good news is it's cheap.
As for the 5 computers in the house... no problem. In fact the new Apple TV is easier than the old Apple TV because it uses iTunes new "Home Sharing" feature.
To use it, make sure each computer in your house has been upgraded to run the latest version of iTunes. On each computer, go into iTunes -> Advanced -> Turn on Home Sharing. You will need to provide your iTunes ID (this is the email address you use to buy content from iTunes.)
You then turn on Home Sharing on the Apple TV. If you own any iPhones or an iPod Touch, download the latest version of Apple's "Remote" app (free) and turn on "Home Sharing" there as well.
The simplicity of "Home Sharing" is that the Apple TV will "just see" every computer in your house as long as it is running iTunes at the time. No need to set a sharing password on each computer and pair the Apple TV to each iTunes individually.
You can now browse from computer to computer to find movies, TV shows, music, etc.
If you want to use take a computer to your vacation cottage, you'd still need the original Apple TV and/or a laptop. I use a small portable hard drive with my laptop so I can take a copy of my movies with me when I travel.
One last point... old iTunes "sharing" would allow +streaming only+! Even if all computers used the same iTunes account it didn't matter. This was a huge annoyance as content purchased on different computers would not be available on all computers and re-syncing your collection was a pain. "Home Sharing" actually recognizes that the content was all purchased via a common iTunes account so in addition to streaming, it actually allows COPYING. If the content was purchased via iTunes, then syncing is automatic. If the content was purchased elsewhere, you can tell "Home Sharing" in iTunes to display only "Items not in my library". From that screen you can do a select all and drag to your own library.

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I need a solution of this complicated problem to finalize my final project

Introduction
This project revolves around an important text processing task, text compression. In particular, you will be required to encode a sequence of words read from a source file into binary strings (using only the characters 0 and 1). It is important to note that text compression makes it possible to minimize the time needed to transmit text over a low-bandwidth channel, such as infrared connection. Moreover, text compression is helpful in storing large documents more efficiently. The coding scheme explored in this project is the Huffman Coding Scheme. While standard encoding schemes, such as Unicode and ASCII, use fixed-length binary strings to encode characters, Huffman coding assigns variable-length codes to characters. The length of a Huffman code depends on the relative frequency of its associated character. Specifically, Huffman coding capitalizes on the fact that some characters are used more frequently than others to use short codewords when encoding high-frequency characters and long codewords to encode low-frequency characters. Huffman coding saves space over state of the art fixed-length encoding and is therefore at the heart of file compression techniques in common use today. Figure 1 shows the relative frequencies of the letters of the alphabet as they appear in a representative sample of English documents.
Letter     Frequency     Letter     Frequency
A     77     N     67
B     17     O     67
C     32     P     20
D     42     Q     5
E     120     R     59
F     24     S     67
G     17     T     85
H     50     U     37
I     76     V     12
J     4     W     22
K     7     X     4
L     42     Y     22
M     24     Z     2
Figure 1. Relative frequencies for the 26 letters of the alphabet.
Huffman coding and decoding
Huffman’s algorithm for producing optimal variable-length codes is based on the construction of a binary tree T that represents the code. In other words, the Huffman code for each character is derived from a full binary tree known as the Huffman coding tree, or simply the Huffman tree. Each edge in the Huffman tree represents a bit in a codeword, with each edge connecting a node with its left child representing a “0” and each edge connecting a node with its right child representing a “1”. Each external node in the tree is associated with a specific character, and the Huffman code for a character is defined by the sequence of bits in the path from the root to the leaf corresponding to that character. Given codes for the characters, it is a simple matter to use these codes to encode a text message. You will have simply to replace each letter in the string with its binary code (a lookup table can be used for this purpose).
In this project, you are not going to use the table given in Figure 1 to determine the frequency of occurrence per character. Instead, you will derive the frequency corresponding to a character by counting the number of times that character appears in an input file. For example, if the input file contains the following line of text “a fast runner need never be afraid of the dark”, then the frequencies listed in the table given in Figure 2 should be used per character:
Character          a     b     d     e     f     H     i     k     n     O     r     s     t     u     v
Frequency     9     5     1     3     7     3     1     1     1     4     1     5     1     2     1     1
Figure 2. The frequency of each character of the String X.
Based on the frequencies shown in Figure 2, the Huffman tree depicted in Figure 3 can be constructed:
Figure 3. Huffman tree for String X.
The code for a character is thus obtained by tracing the path from the root of the Huffman tree to the external node where that character is stored, and associating a left edge with 0 and a right edge with 1. In the context of the considered example for instance, the code for “a” is 010, and the code for “f” is 1100.
Once the Huffman tree is constructed and the message obtained from the input file has been encoded, decoding the message is done by looking at the bits in the coded string from left to right until all characters are decoded. This can be done by using the Huffman tree in a reverse process from that used to generate the codes. Decoding the bit string begins at the root of the tree. Branches are taken depending on the bit value – left for ‘0’ and right for ‘1’ – until reaching a leaf node. This leaf contains the first character in the message. The next bit in the code is then processed from the root again to start the next character. The process is repeated until all the remaining characters are decoded. For example, to decode the string “0101100” in the case of the example under study, you begin at the root of the tree and take a left branch for the first bit which is ‘0’. Since the next bit is a ‘1’, you take a right branch. Then, you take a left branch (for the third bit ‘1’), arriving at the leaf node corresponding to the letter a. Thus, the first letter of the coded word is a. You then begin again at the root of the tree to process the fourth bit, which is a ‘1’. Taking 2 right branches then two left branches, you reach the leaf node corresponding to the letter f.
Problem statement
You are required to implement the Huffman coding/decoding algorithms. After you complete the implementation of the coding/decoding processes, you are asked to use the resulting Java code to:
1.     Read through a source file called “in1.dat” that contains the following paragraph:
“the Huffman coding algorithm views each of the d distinct characters of the string X as being in separate Huffman trees initially with each tree composed of a single leaf node these separate trees will eventually be joined into a single Huffman tree in each round the algorithm takes the two binary trees with the smallest frequencies and merges them into a single binary tree it repeats this process until only one tree is left.”
2.     Determine the actual frequencies for all the letters in the file.
3.     Use the frequencies from the previous step to create a Huffman coding tree before you assign codes to individual letters. Use the LinkedBinaryTree class that we developed in class to realize your Huffman coding trees.
4.     Produce an encoded version of the input file “in1.dat” and then store it in an output file called “out.dat”.
5.     Finally, the decoding algorithm will come into play to decipher the codes contained in “out.dat”. The resulting decoded message should be written to an output file called “in2.dat”. If nothing goes wrong, the text stored in “in1.dat” and the one in “in2.dat” must match up correctly.

jschell wrote:
I need a solution of this complicated problem to finalize my final project The solution:
1. Write code
2. Test code3. If test fails, debug code, then go to step 2.

I´ve bought the new IPad3, what a disappointment the 3G does not work, no Internet available, APPLE what are you doing for the all the people in Germany who bought the new IPad3? I´m still an Apple fan, all my products are from Apple but I need a solution

I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.

JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it?

Pop Up Window - Dynamic Page - Need Best Solution

I'd like to create a pop-up window for my site. I've used behaviors in the past. I'm not sure if that's the best way now. Basiclly I have a photo gallery with thumbnails. Once you click the thumbnail I want a larger window to open with the image. I've seen the javascript windows used that use CSS lightbox, however I can't get it to work with my site. I guess I should mention I'm using:
ASP vbscript
SQL Database
Unit is set for repeating regions
Help me find the best solution to carry out this task. Thanks in advance.

At this time I can't post the page. This is what I'm using:
http://www.lokeshdhakar.com/projects/lightbox2/
Using asp vbscript ,ms sql database with a link to the image paths that are sitting in the images folder.
This is really all I can show you. Hopefully you can make heads of tails out of it. Thanks for answering my post!
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
Dim rs_ssfGallery
Dim rs_ssfGallery_cmd
Dim rs_ssfGallery_numRows
Set rs_ssfGallery_cmd = Server.CreateObject ("ADODB.Command")
rs_ssfGallery_cmd.ActiveConnection = MM_conn_ssfGallery_STRING
rs_ssfGallery_cmd.CommandText = "SELECT * FROM dbo.tbl_pictures ORDER BY picture_ID ASC"
rs_ssfGallery_cmd.Prepared = true
Set rs_ssfGallery = rs_ssfGallery_cmd.Execute
rs_ssfGallery_numRows = 0
%>
<%
Dim HLooper1__numRows
HLooper1__numRows = 25
Dim HLooper1__index
HLooper1__index = 0
rs_ssfGallery_numRows = rs_ssfGallery_numRows + HLooper1__numRows
%>
<%
' *** Recordset Stats, Move To Record, and Go To Record: declare stats variables
Dim rs_ssfGallery_total
Dim rs_ssfGallery_first
Dim rs_ssfGallery_last
' set the record count
rs_ssfGallery_total = rs_ssfGallery.RecordCount
' set the number of rows displayed on this page
If (rs_ssfGallery_numRows < 0) Then
rs_ssfGallery_numRows = rs_ssfGallery_total
Elseif (rs_ssfGallery_numRows = 0) Then
rs_ssfGallery_numRows = 1
End If
' set the first and last displayed record
rs_ssfGallery_first = 1
rs_ssfGallery_last = rs_ssfGallery_first + rs_ssfGallery_numRows - 1
' if we have the correct record count, check the other stats
If (rs_ssfGallery_total <> -1) Then
If (rs_ssfGallery_first > rs_ssfGallery_total) Then
    rs_ssfGallery_first = rs_ssfGallery_total
End If
If (rs_ssfGallery_last > rs_ssfGallery_total) Then
    rs_ssfGallery_last = rs_ssfGallery_total
End If
If (rs_ssfGallery_numRows > rs_ssfGallery_total) Then
    rs_ssfGallery_numRows = rs_ssfGallery_total
End If
End If
%>
<%
Dim MM_paramName
%>
<%
' *** Move To Record and Go To Record: declare variables
Dim MM_rs
Dim MM_rsCount
Dim MM_size
Dim MM_uniqueCol
Dim MM_offset
Dim MM_atTotal
Dim MM_paramIsDefined
Dim MM_param
Dim MM_index
Set MM_rs    = rs_ssfGallery
MM_rsCount   = rs_ssfGallery_total
MM_size      = rs_ssfGallery_numRows
MM_uniqueCol = ""
MM_paramName = ""
MM_offset = 0
MM_atTotal = false
MM_paramIsDefined = false
If (MM_paramName <> "") Then
MM_paramIsDefined = (Request.QueryString(MM_paramName) <> "")
End If
%>
<%
' *** Move To Record: handle 'index' or 'offset' parameter
if (Not MM_paramIsDefined And MM_rsCount <> 0) then
' use index parameter if defined, otherwise use offset parameter
MM_param = Request.QueryString("index")
If (MM_param = "") Then
    MM_param = Request.QueryString("offset")
End If
If (MM_param <> "") Then
    MM_offset = Int(MM_param)
End If
' if we have a record count, check if we are past the end of the recordset
If (MM_rsCount <> -1) Then
    If (MM_offset >= MM_rsCount Or MM_offset = -1) Then ' past end or move last
      If ((MM_rsCount Mod MM_size) > 0) Then         ' last page not a full repeat region
        MM_offset = MM_rsCount - (MM_rsCount Mod MM_size)
      Else
        MM_offset = MM_rsCount - MM_size
      End If
    End If
End If
' move the cursor to the selected record
MM_index = 0
While ((Not MM_rs.EOF) And (MM_index < MM_offset Or MM_offset = -1))
    MM_rs.MoveNext
    MM_index = MM_index + 1
Wend
If (MM_rs.EOF) Then
    MM_offset = MM_index ' set MM_offset to the last possible record
End If
End If
%>
<%
' *** Move To Record: if we dont know the record count, check the display range
If (MM_rsCount = -1) Then
' walk to the end of the display range for this page
MM_index = MM_offset
While (Not MM_rs.EOF And (MM_size < 0 Or MM_index < MM_offset + MM_size))
    MM_rs.MoveNext
    MM_index = MM_index + 1
Wend
' if we walked off the end of the recordset, set MM_rsCount and MM_size
If (MM_rs.EOF) Then
    MM_rsCount = MM_index
    If (MM_size < 0 Or MM_size > MM_rsCount) Then
      MM_size = MM_rsCount
    End If
End If
' if we walked off the end, set the offset based on page size
If (MM_rs.EOF And Not MM_paramIsDefined) Then
    If (MM_offset > MM_rsCount - MM_size Or MM_offset = -1) Then
      If ((MM_rsCount Mod MM_size) > 0) Then
        MM_offset = MM_rsCount - (MM_rsCount Mod MM_size)
      Else
        MM_offset = MM_rsCount - MM_size
      End If
    End If
End If
' reset the cursor to the beginning
If (MM_rs.CursorType > 0) Then
    MM_rs.MoveFirst
Else
    MM_rs.Requery
End If
' move the cursor to the selected record
MM_index = 0
While (Not MM_rs.EOF And MM_index < MM_offset)
    MM_rs.MoveNext
    MM_index = MM_index + 1
Wend
End If
%>
<%
' *** Move To Record: update recordset stats
' set the first and last displayed record
rs_ssfGallery_first = MM_offset + 1
rs_ssfGallery_last = MM_offset + MM_size
If (MM_rsCount <> -1) Then
If (rs_ssfGallery_first > MM_rsCount) Then
    rs_ssfGallery_first = MM_rsCount
End If
If (rs_ssfGallery_last > MM_rsCount) Then
    rs_ssfGallery_last = MM_rsCount
End If
End If
' set the boolean used by hide region to check if we are on the last record
MM_atTotal = (MM_rsCount <> -1 And MM_offset + MM_size >= MM_rsCount)
%>
<%
' *** Go To Record and Move To Record: create strings for maintaining URL and Form parameters
Dim MM_keepNone
Dim MM_keepURL
Dim MM_keepForm
Dim MM_keepBoth
Dim MM_removeList
Dim MM_item
Dim MM_nextItem
' create the list of parameters which should not be maintained
MM_removeList = "&index="
If (MM_paramName <> "") Then
MM_removeList = MM_removeList & "&" & MM_paramName & "="
End If
MM_keepURL=""
MM_keepForm=""
MM_keepBoth=""
MM_keepNone=""
' add the URL parameters to the MM_keepURL string
For Each MM_item In Request.QueryString
MM_nextItem = "&" & MM_item & "="
If (InStr(1,MM_removeList,MM_nextItem,1) = 0) Then
    MM_keepURL = MM_keepURL & MM_nextItem & Server.URLencode(Request.QueryString(MM_item))
End If
Next
' add the Form variables to the MM_keepForm string
For Each MM_item In Request.Form
MM_nextItem = "&" & MM_item & "="
If (InStr(1,MM_removeList,MM_nextItem,1) = 0) Then
    MM_keepForm = MM_keepForm & MM_nextItem & Server.URLencode(Request.Form(MM_item))
End If
Next
' create the Form + URL string and remove the intial '&' from each of the strings
MM_keepBoth = MM_keepURL & MM_keepForm
If (MM_keepBoth <> "") Then
MM_keepBoth = Right(MM_keepBoth, Len(MM_keepBoth) - 1)
End If
If (MM_keepURL <> "") Then
MM_keepURL = Right(MM_keepURL, Len(MM_keepURL) - 1)
End If
If (MM_keepForm <> "") Then
MM_keepForm = Right(MM_keepForm, Len(MM_keepForm) - 1)
End If
' a utility function used for adding additional parameters to these strings
Function MM_joinChar(firstItem)
If (firstItem <> "") Then
    MM_joinChar = "&"
Else
    MM_joinChar = ""
End If
End Function
%>
<%
' *** Move To Record: set the strings for the first, last, next, and previous links
Dim MM_keepMove
Dim MM_moveParam
Dim MM_moveFirst
Dim MM_moveLast
Dim MM_moveNext
Dim MM_movePrev
Dim MM_urlStr
Dim MM_paramList
Dim MM_paramIndex
Dim MM_nextParam
MM_keepMove = MM_keepBoth
MM_moveParam = "index"
' if the page has a repeated region, remove 'offset' from the maintained parameters
If (MM_size > 1) Then
MM_moveParam = "offset"
If (MM_keepMove <> "") Then
    MM_paramList = Split(MM_keepMove, "&")
    MM_keepMove = ""
    For MM_paramIndex = 0 To UBound(MM_paramList)
      MM_nextParam = Left(MM_paramList(MM_paramIndex), InStr(MM_paramList(MM_paramIndex),"=") - 1)
      If (StrComp(MM_nextParam,MM_moveParam,1) <> 0) Then
        MM_keepMove = MM_keepMove & "&" & MM_paramList(MM_paramIndex)
      End If
    Next
    If (MM_keepMove <> "") Then
      MM_keepMove = Right(MM_keepMove, Len(MM_keepMove) - 1)
    End If
End If
End If
' set the strings for the move to links
If (MM_keepMove <> "") Then
MM_keepMove = Server.HTMLEncode(MM_keepMove) & "&"
End If
MM_urlStr = Request.ServerVariables("URL") & "?" & MM_keepMove & MM_moveParam & "="
MM_moveFirst = MM_urlStr & "0"
MM_moveLast = MM_urlStr & "-1"
MM_moveNext = MM_urlStr & CStr(MM_offset + MM_size)
If (MM_offset - MM_size < 0) Then
MM_movePrev = MM_urlStr & "0"
Else
MM_movePrev = MM_urlStr & CStr(MM_offset - MM_size)
End If
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Southern Store Fixtures Inc.</title>
<link href="CSS/global.css" rel="stylesheet" type="text/css" />
<link href="CSS/layout.css" rel="stylesheet" type="text/css" />
<link href="CSS/details.css" rel="stylesheet" type="text/css" />

<link href="CSS/lightbox.css" rel="stylesheet" type="text/css" />
<script src="Scripts/protype.js" type="text/javascript"></script>
<script src="Scripts/scriptaculous.js?load=effects,builder" type="text/javascript"></script>
<script src="Scripts/lightbox.js" type="text/javascript"></script>

<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
#apDiv1 {
position:absolute;
left:1226px;
top:643px;
width:284px;
height:251px;
z-index:1;
a:link {
color: #CCC;
text-decoration: none;
a:hover {
color: #5FABFF;
text-decoration: none;
a:visited {
text-decoration: none;
a:active {
text-decoration: none;
</style>
<link href="CSS/gallery.css" rel="stylesheet" type="text/css" />
</head>
<body>

<div id="wrapper">

<div id="header"><img src="SSFLogo.png" width="298" height="96" alt="SSFlogo" /></div>

<div id="banner"><img src="blueHeader_2.png" width="950" height="133" alt="header" /></div>

<div id="mainNav">
    <ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="index.asp">Home</a>    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Company Info</a>
      <ul>
        <li><a href="#">Privacy Policy</a></li>
        <li><a href="#">About Us</a></li>
        <li><a href="#">Jobs/Career</a></li>
        <li><a href="#">Information Request</a></li>
      </ul>
    </li>
    <li><a class="MenuBarItemSubmenu" href="#">Gallery</a>
      <ul>
        <li><a class="MenuBarItemSubmenu" href="#">Store Pictures</a>
          <ul>
            <li><a href="#">Item 3.1.1</a></li>
            <li><a href="#">Item 3.1.2</a></li>
          </ul>
        </li>
</ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Products</a>
      <ul>
        <li><a href="#">Self Serve</a></li>
        <li><a href="#">Serve</a></li>
        <li><a href="#">Multi Decks</a></li>
        <li><a href="#">Combinations</a></li>
        <li><a href="#">Food Service</a></li>
        <li><a href="#">Islands</a></li>
        <li><a href="#">Produce</a></li>
        <li><a href="#">Floral</a></li>
        <li><a href="#">Hot Foods</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">News/Events</a>
      <ul>
        <li><a href="#">Inside Look</a></li>
        <li><a href="#">Happenings</a></li>
        <li><a href="#">Trade Show Schedule</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Contact</a>
      <ul>
        <li><a href="#">Customer Service</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Buiss. Portal</a>
      <ul>
        <li><a href="#">Login</a></li>
      </ul>
    </li>
</ul>
</div>


<div id="subBanner"><img src="secBanner.png" width="950" height="156" alt="secBanner" /></div>


<div id="contentMain">
    
    <div id="gallery">
      <p>
        
      </p>
      <table width="400" border="0" align="center" id="galleryNav2">
        <tr>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
              <a href="<%=MM_moveFirst%>">First</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
            <a href="<%=MM_movePrev%>">Previous</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
            <a href="<%=MM_moveNext%>">Next</a>
          <% End If ' end Not MM_atTotal %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
            <a href="<%=MM_moveLast%>">Last</a>
          <% End If ' end Not MM_atTotal %></td>
        </tr>
      </table>
      <p> </p>
      <table align="center" id="HorzLooper">
        <%
startrw = 0
endrw = HLooper1__index
numberColumns = 5
numrows = 5
while((numrows <> 0) AND (Not rs_ssfGallery.EOF))
startrw = endrw + 1
endrw = endrw + numberColumns
%>
        <tr align="center" valign="top">
          <%
While ((startrw <= endrw) AND (Not rs_ssfGallery.EOF))
%>
          <td><div id="galleryImage">
            <div id="galleryThumb"><a href="images/pic/<%=(rs_ssfGallery.Fields.Item("picture_url").Value)%> rel="lightbox"><img src="images/thumb/<%=(rs_ssfGallery.Fields.Item("thumb_url").Value)%>" alt="<%=(rs_ssfGallery.Fields.Item("alt_url").Value)%>" /></a></div>
            <div id="galleryImageID"><%=(rs_ssfGallery.Fields.Item("picture_ID").Value)%></div>
            <div id="galleryImageFamily"><%=(rs_ssfGallery.Fields.Item("family").Value)%></div>
          </div></td>
          <%
startrw = startrw + 1
rs_ssfGallery.MoveNext()
Wend
%>
        </tr>
        <%
numrows=numrows-1
Wend
%>
      </table>
      <p> </p>
      <table width="400" border="0" align="center" id="galleryNav">
        <tr>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
              <a href="<%=MM_moveFirst%>">First</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
              <a href="<%=MM_movePrev%>">Previous</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
              <a href="<%=MM_moveNext%>">Next</a>
          <% End If ' end Not MM_atTotal %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
              <a href="<%=MM_moveLast%>">Last</a>
          <% End If ' end Not MM_atTotal %></td>
        </tr>
      </table>

    </div>
    
</div>


<div id="contentSec">
    <div id="column1"></div>
    <div id="column2"></div>
    <div id="column3"></div>
</div>


<div id="secNav">
    <div id="column1">
      <p align="center">Supermarket </p>
      <p align="center">C-Store </p>
      <p align="center">Small Format  </p>
      <p align="center"> Food Service </p>
      <p align="center"> Gourmet </p>
      <p align="center"> Restaurant</p>
    </div>
    <div id="column2">
      <p align="center">Produce </p>
      <p align="center">Prepared Foods</p>
      <p align="center">Deli </p>
      <p align="center"> Meat </p>
      <p align="center">Seafood </p>
      <p align="center">Cheese </p>
      <p align="center">Bakery </p>
      <p align="center">Floral </p>
      <p align="center">Sushi </p>
      <p align="center"> </p>
</div>
    <div id="column3">
      <p align="center">Soup </p>
      <p align="center"> Chocolate </p>
      <p align="center">Food Bars </p>
      <p align="center">Low Temp </p>
      <p align="center">Gelato </p>
      <p align="center"> Hot Cases </p>
      <p align="center"> Pizza/Sandwich </p>
      <p align="center"> Multi-Decks </p>
      <p align="center">  Islands</p>
      <p> </p>
    </div>
    <div id="column4">
      <p>Trade Shows</p>
      <p>About</p>
      <p>Info</p>
      <p>Privacy</p>
      <p>Content</p>
      <p>Service</p>
      <p>Parts</p>
      <p>Login</p>
    </div>
</div>


<div id="footer">Southern Store Fixtures 2010 Inc.| All Rights Reserved</div>

</div>

<script type="text/javascript">

</script>
</body>
</html>
<%
rs_ssfGallery.Close()
Set rs_ssfGallery = Nothing
%>

My 4s phone getting hot in sim tray side so i need a solution

my 4s phone getting hot in sim tray side so i need a solution?

They are free at Corporate Verizon stores; retailers usually charge for them. You also can call Customer Service and have them send you one.
And you don't need a SIM card to activate an iPhone 4S on VzW's network.

I NEED A SOLUTION ON HOW TO UNLOCK THE AFTER EFFECT "Action Trailer.aep"

I NEED A SOLUTION ON HOW TO UNLOCK THE AFTER EFFECT File, "Action Trailer.aep"

We seriously don't have enough information to help you.
What do you mean by "unlock"?
My wild, shot-in-the-dark guess is that you've got some sort of template that, when you try to save, says that it's locked. If that's the case, try using "Save As" instead. If that's not your problem, refer to Todd's link and provide more info.

I need a Solution Manager Key, please

Hello,
I'm running an HSC and need a solution manager key. Can anyone generate a key for me, please?
Hostname = FUJISAPD
System number = 01
Instance = R3Q
Thanks in advance.
Best Regards,
André Koji Honma
Support Analyst

Those keys MUST NOT be posted here.
Install a solution manager, you will need it because you won´t get any patches without it.
Markus

I need a solution

Hi,
i need a solution for voip,
we have two offices in two city
in one of our offices we have 100 land line and in another 25 land line, we need 200 internal line for first office and 75 internal for second office , we need both offices connect to each other,
what equipments do you offer to me
Regards,

linksys is just for small office home office, im afraid the device they have will not be able to handle the network setup that you required. the number of lines that can be available for linksys voice system is limited. you may check some other heavy duty voice over ip device for this kind of network setup.

Did not find needed xsi:type attribute on element anyType

The followings exception is thrown when using the access a web service using the
proxy jar.
The return xml contains
<debts xm:bind="debts is return.safaccount.debts">
<anyType xm:multiple="debt in return.safaccount.debts">{debt}</anyType>
</debts>
debts is a vector contains Serializable Object class.
How do you resolve this?
<Nov 14, 2002 2:36:27 PM ICT> <Error> <HTTP> <101019> <[ServletContext(id=553030
0,name=EAIService,context-path=/EAIService)] Servlet failed with IOException
java.rmi.RemoteException: web service invoke failed; nested exception is:
javax.xml.soap.SOAPException: failed to deserialize xml:weblogic.xml.sch
ema.binding.DeserializationException: did not find needed xsi:type attribute on
element <anyType>
javax.xml.soap.SOAPException: failed to deserialize xml:weblogic.xml.schema.bind
ing.DeserializationException: did not find needed xsi:type attribute on element
<anyType>
at weblogic.webservice.core.DefaultPart.toJava(DefaultPart.java:296)
at weblogic.webservice.core.DefaultMessage.toJava(DefaultMessage.java:35
9)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:465)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav

Hi Daniel,
This is really an "constructing and XMLMap issue" with WebLogic Workshop, so I
would post it on that newsweb group:
weblogic.developer.interest.workshop
BTW: Serialization/Deserialization required instanciable classes with no-arg constructors.
You should attach the WSDL for this web service, so that folks can see what Workshop
generated for the schema element(s). This (the schema elements) is probably where
the problem starts :-) Also, state if that is the default xmlmap generated by
Workshop, or a custom one.
Regards,
Mike Wooten
"daniel" <[email protected]> wrote:
>
The followings exception is thrown when using the access a web service
using the
proxy jar.
The return xml contains
<debts xm:bind="debts is return.safaccount.debts">
<anyType xm:multiple="debt in return.safaccount.debts">{debt}</anyType>
</debts>
debts is a vector contains Serializable Object class.
How do you resolve this?
<Nov 14, 2002 2:36:27 PM ICT> <Error> <HTTP> <101019> <[ServletContext(id=553030
0,name=EAIService,context-path=/EAIService)] Servlet failed with IOException
java.rmi.RemoteException: web service invoke failed; nested exception
is:
javax.xml.soap.SOAPException: failed to deserialize xml:weblogic.xml.sch
ema.binding.DeserializationException: did not find needed xsi:type attribute
on
element <anyType>
javax.xml.soap.SOAPException: failed to deserialize xml:weblogic.xml.schema.bind
ing.DeserializationException: did not find needed xsi:type attribute
on element
<anyType>
at weblogic.webservice.core.DefaultPart.toJava(DefaultPart.java:296)
at weblogic.webservice.core.DefaultMessage.toJava(DefaultMessage.java:35
9)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:465)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav

Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

After the iOS 7.0.2 update words with friends is not working for me either. When I attempt to open the app it just closes itself after a few seconds of being open. This happens every time I attempt to open it.

Unix find - need nonrecursive solution

Similar Messages

Maybe you are looking for