Exporting .trx file after running testcases using TFS Inrelease 2013.4

Hi All,
Need your inputs in achieving a major blocker in our release process: 
1) We are running testcases as the part of release process using Inrelease TFS 2013.4 .
2) Testcases runs fine in a lab environment and the issues come wrt to .trx file.
3) We couldn't find any .trx file in my RM deployer, after digging into the issue found the PS Script (TCMExec1.PS) has no option to export .trx file rather , it delete the .trx file .
Look at below highlighted line : 
If I comment the delete statement , it exports to %appdate%temp../RM../ location , every time I trigger test cases.
Since it creates a new folder every time I run testcases, I m not able to read trx file to publish a customized report(We have written a login for this)
Could you please help me with an option/script  to export to one particular location ? Like C:\Report ?  
(Optional: Environment : TFS 2013.4 , Rm 2013.4, We are using RM Deployer ,MTM (Labcenter) 2013.4 )
Many Thanks,
Abraham Dhanyaraj

Hi Abraham,
I am glad to hear you resolved the issue. Thanks for sharing your experience here, it is good to other members who experience the same issue in the community.
Best regards,

Similar Messages

  • Exporting audio files separately from video using a Mac

    Using a Mac computer, can you export audio files separately from video in Adobe Premiere Elements 11?  If so, how would I do that?
    Thanks as always.

    I worked through the instructions in the Classroom in a Book for exporting
    the video and the audio together and the audio separately, but I am not
    quite sure of some of what to check in some of the categories.  I would
    appreciate some guidance.  The purpose of sending this project is to have
    my son clean up the sound.
    highlighted MPEG
    Presets:  NTSC DVD Standard
    File:  Speaking Out for Healthcare for Everyone-51.prel
    Save In: /Users/Barb/Desktop/New York State Single Payer/Healthcare
    Stories/Videos
    Advanced:  clicked on
    Preset:  NTSC DVD Standard  Or should it be widescreen
    Audio Format Settings
    Audio Format:  Dolby Digital  (Don't know what to check)
    Basic Audio Settings
    Codec:  Dolby Digital
    Audio Layer:  Dolby Digital Stereo
    Frequency:  48 kHz
    Bitrate Settings:
    Bitrate (kbps):  Don't know what to check.  It shows up as 192
    Thanks.  I don't know what I would do without this community.
    barb

  • Database automatic export keeps failing after running for about 24h

    Hi,
    We have a Sql azure database that is not that big in size (+-4.5 GB) but does have a reasonably large schema (+-12700 tables) Until recently (01 august) we had a daily export scheduled of the database to use as backup. However since the first of
    this month, we get daily mails that the export has failed. No other indication is given as to why.
    We did notice that the time it took to take the backup increases a lot over time. the time it took to take the export has gone up in one month from 13h to 19h, while the data size of the bacpac file has increased from 647MB to 727MB.  has anyone encountered
    a situation like this before? My only guess is that the export takes to long to take. 
    Are there any other options to take a backup? We never needed a backup up until this point, but we don't want to wait with addressing this issue until we actually need it...
    best regards,
    Wim

    Hi,
    Please have a check on the below links for Azure SQL Database Backup and Restore.
    http://msdn.microsoft.com/en-us/library/jj650016.aspx
    http://fabriccontroller.net/blog/posts/backup-and-restore-your-sql-azure-database-using-powershell/
    http://blogs.msdn.com/b/wats/archive/2013/03/04/different-ways-to-backup-your-windows-azure-sql-database.aspx
    I would suggest you post a feedback on the SQL Database Feedback forum.
    http://feedback.azure.com/forums/217321-sql-database
    Hope this helps.
    Regards,
    Mekh.

  • I have exported a file from premiere cs3 using quicktime animation codec, when i burn it the audio is not there..help!?

    hello.
    am having a proble with adobe premiere cs3
    i have exported the file as quicktime using the animation codec, with 100per cent quality as it needs to be the highest quality
    when i play the file with media player the sound is there, but when i burn it onto a dvd the audio is not there anymore... i really dont understand what i am doing wrong! can anyone help please?
    i am using quicktine as im told this the best for optimum lossless quality
    if i cannot burn it with audio using the quikctime animation codec, then i might try exporting it as an avi file. if so, what is the best codec to use for lossless quality?
    thankyou!!!!

    And when you follow Jim's suggestions, Export as elemental streams, i.e. one Video-only file and one Audio-only file. Encore will like that better.
    Good luck,
    Hunt

  • Auto_annotation data commented in .ldt file after running fndload download

    Hi guys,
    After running fndload to download conc program .ldt file created 'afcpprog.lct 115.40' is having auto_annotation code in '/*..*/' that is commented code,contains parameters list inside,I think due to that when .ldt file uploaded it doesn't copy parameters with conc program, can you please suggest solution for this.
    BEGIN PROGRAM 'GEONTEUPROFINVXML' 'GEMSONT'...rnSRS_FLEX = 'GEMSONT' '$SRS$.GEONTEUPROFINVXML'rn AUTO_ANNOTATION =rn '/**nrn * @param org_id org_idnrn * @rep:paraminfo {@rep:type OE: Number Zero Precision} {@rep:displayed N} {@rep:required}nrn------* @rep:paraminfo {@rep:type 100 Characters} {@rep:displayed Y}nrn */'....end programrnrnrncan you pl suggest solution for this
    Thanks,
    varun

    Hi guys,
    After running fndload to download conc program .ldt file created 'afcpprog.lct 115.40' is having auto_annotation code in '/*..*/' that is commented code,contains parameters list inside,I think due to that when .ldt file uploaded it doesn't copy parameters with conc program, can you please suggest solution for this.
    BEGIN PROGRAM 'GEONTEUPROFINVXML' 'GEMSONT'...rnSRS_FLEX = 'GEMSONT' '$SRS$.GEONTEUPROFINVXML'rn AUTO_ANNOTATION =rn '/**nrn * @param org_id org_idnrn * @rep:paraminfo {@rep:type OE: Number Zero Precision} {@rep:displayed N} {@rep:required}nrn------* @rep:paraminfo {@rep:type 100 Characters} {@rep:displayed Y}nrn */'....end programrnrnrncan you pl suggest solution for this
    Thanks,
    varun

  • Where are my files after running Migration Assistant?

    I ran Migration Assistant using a Time Machine back up as I bought a new MacBook Pro that could hold all my files that I previously had on an iMac and another MacBook Pro. I first ran Migration Assistant and got all my files, preferences etc. on the new MBP no problem, but then after trying to combine the files from the iMac using a Time Machine back up as well, I don't see any of the files from my iMac available anywhere. However, all the space is filled up. Where are my files? Am I doing it wrong?

    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

  • Unable to access BCM 2010 DB with Outlook 2010 after running compatibility pack for Outlook 2013

    After reading about the Description of Business Contact Manager compatibility pack for Outlook at this link http://support.microsoft.com/kb/2793723 it clearly states "Business Contact Manager for Microsoft Outlook is a compatibility pack that enables
    Business Contact Manager for Outlook 2007 and Business Contact Manager for Outlook 2010 to run in Microsoft Outlook 2010 and Microsoft Outlook 2013. Business Contact Manager for Outlook (BCM) also supports using Outlook 2010 and Outlook 2013 in a side-by-side
    installation."  This link also states "General product fixes, including stability and performance improvements."
    So, I was hoping for some stability and performance improvements but desired to continue running from Outlook 2010.  After running this downloaded compatibility pack it had little messages other than completed. If I try to run it again it says the database
    is already updated.  however, now I cannot open the BCM DB in Outlook 2010.  when I try to connect to it from Outlook 2010 BCM it only opens a small window with no message, only a yellow exclamation sign.  It also won't allow me to restore the
    back up.
    Can I undo what the compatibility pack program did to my BCM 2010 DB?
    Now it won't allow me to restore a DB from two days ago. It gives this error "Access is denied due to a password failure. RESTORE FILELIST is terminating prematurely".  I know the password is correct.
    Please help, anyone? Now I'm starting to freak out a bit.  I am going to reinstall BCM and pray.
    I was able to restore the two day old DB by not entering a password. Odd since I know I backed up using a password.

    Hi,
    Just checking in to see if the information was helpful. Please let us know if you would like further assistance.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • How do I restore my backup (.wim files) after running HP System recovery on a G62 with windows 7

    I had to do a system restore after getting a blue screen and I backed up the files on my external drive. after restoring the system I tried to restore my files from my external with Recovery manager but it didn't see my external so I couldn't restore. I copied and pasted the backup folder on my g62 desktop and tried again with no results. As far as I can tell the restore was done because my free space on the g 62 decreased by the same size as the backup, but when I open the c:\ drive I can't see the transfer. these are .wim files and I even tried to call tech service (my warranty juse expired) and they were trying to sell me extended warranty for the next year to help me. the problem exist with HP if they had good programs that follow up what it was meant to do maybe Today I wouldn't be here looking for help. when I restored the system, recovery told me the it would install my backup, but nothing happened leaving me hanging.NEED HELP!!!!!!!!!!!!!!

    If you call AppleCare they will be more than willing to help you. Use the appropriate phone number on this page. Tell them you need a support related fulfillment - replacement disks. As shldr says there will be a small charge, but you will be able to install your system again.
    Best of luck.

  • Looking for a script exporting pdf files after changing PMS to CMYK colors

    Hello every one,
    I have lot of files which needs to change in InDesign
    1. PMS colors (if any) to CMYK
    2. Exportas a specific color profile (GWG_GenericCMYK)
    To do this I have file names, sizes information in excel sheet. Can I assume with scripts…?
    New file sizes, name creation      will be using of excel sheet,
    Save      the file (location I will choose manually sounds that script needs to      pause here)
    Placing in center of the      document than
    Color swatches changes PMS to     CMYK (if any other wise leave it as it is),  at the end
    Exports file as a pdf with     already defined pdf settings (GWG_GenericCMYK).
    Can some one make my dream come true ...???
    If anyone solve this situation it’s saves my towns of time. Please help me any tremendous scripter ….
    I don’t have any knowledge in scripting... Please see for example excel sheet. sorry for image i tryed to upload excel file some error..!!!
    Thanks in Advance
    Best Regards,
    Siva

    Hello every one,
    If whole process is not possible through script..? Please let me know some solutions, reference links, are any suggestions, Please help me any one..!!!
    Regards,
    Siva

  • Illustrator CS6 won't open additional files after 30 minutes use

    Illustrator CS6 (on an iMac, OS X Yosemite, Version 10.10) sort of freezes up after I've been using it for about 30 minutes - it won't open or create additional files or copy/cut/paste objects.
    It did this with OS X Maverick as well. I tried uninstalling the software and reinstalling it.
    The only way I can fix this issue is to save all opened windows and quit Illustrator. When I reopen it, it seems fine but it freezes up again every hour or so.
    Please help! Thank you

    Hello worksmc,
    I looked at the above snapshot and it helps a bit but would like to know if above snapshot is at the state when the AI stops opening the Ai files? If not, then please attach the one for that state as that would really debugging the issue.
    Btw, what type of files do you open for the first half 'n hour? What kind of objects are in those files? Do you keep the multiple documents open, if yes, then how many are these?
    Appreciate your understanding!
    Thanks,
    Dhirendra

  • Best compression for exporting large files from iMovie for use in iDVD?

    I have a doco that I've made as separate projects too slow to make it all in one project - which I then exported as Quicktime .mov files. When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed.
    What would be the best compression to apply to the large .mov files but reduce the overall file sizes by say 10%
    Its sometimes taking up to 6 hours to render each project average total screentime per project is about 70 minutes and each project file size ranges from 1 to 6GB...
    I feel like I'm a little out of my depth on this one!
    Any suggestions for this dilemma?
    Thanks
    Tony

    When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed... Any suggestions for this dilemma?
    Not sure if your 4.7GB reference is for the source files or the resulting "muxed" MPEG2/PCM encoded content. In any case a single layer DVD is limited to 4.7 GBs of total content. To be safe, this usually means you are limited to 4.2 to 4.3 GB of encoded movie and/or slideshow content depending on how many and what type of menus you are creating created. Thus, if you are encoding for a single-layer DVD and your project encoded content exceeds the capacity of your DVD, then this would likely explain your problem.
    If your project size reference is for the source content being added to your iDVD project, then it is totally irrelevant and you need to concentrate on the total duration of your iDVD and the method of encoding instead of file size. Basically, for a single-layer DVD, only about 60 minutes content can be encoded using the "Best Performance" encode option, 90 minutes using the "High Quality" setting, or 2 hours in the "Professional Quality" encode mode. Thus, if your content duration exceeds the capacity of your encoding mode here, it would likely explain your problem.
    In either case, the solution would be to either burn to higher capacity optical media/higher capacity encoding mode or burn your content to multiple DVDs as individual projects at the current media capacity/encoding mode.

  • Export .xlsx file from Webclient UI using abap2xlsx framework

    Hello,
    I have an urgent requirement to export the contents of internal tables to a .xlsx file using abap2xlsx framework.
    Classes like CL_GUI_FRONTEND_SERVICES or FM's like GUI_DOWNLOAD doesn't work for Webclient UI.
    Could anyone suggest me the proper stepwise solution with code snippet.
    Regards,
    Suyog

    Hi Suyog,
    Do you want to download the table view contents to a xls file right?? Is my understanding is correct?
    IF it is then go to the .html page of your table view and there fill the attribute downloadToexcel.
    Data: lv_excel type string.
    Further clarification check the view BT115QIT_SLSQ/Items.
    Regards,
    Rajya lakshmi Ch.

  • I am having trouble displaying my PDF file after running script.

    I am getting a blank screen.  Does anyone know how to fix this?

    You'll need to provide more information. Starting with what "script" you're talking about, and what application you're using to open the file.

  • Recover files after run recovery disk

    Hi, i have an a305-s6898 with Xp.
    I carry the NB to service and there they run the Recovery Disk (that crash, delete, erase, all my XP system, files, mails, disk partitions, etc)
    Does any have an idea if a could recover some files?  (mi xp configuration, partitions, files, something?)
    Does any have an idea if i should (must or could) call to toshiba center and tell him, that his service center at argentnina sucks!?
    Thanks.

    The only chance you have of getting anything back is by sending the drive to one of the drive recovery specialist companies and have them see if they can retreive them.  There is no guarantee that they will be able to do so and the cost would begin around $1000.00 and go up from there. Unless you have some priceless documents or photos that can't be replaced you might as well just move on.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • How can I export a file that may use in Final Cut Pro?

    Hello friends,
    May I know how to export a file that I can use it Final Cut Pro???

    If you are talking about rendering then just use any production codec that FCP supports. You have access to them all. Use the Render Cue or create a custom preset in the Adobe Media Encoder.
    If you want to do something like dynamic link with FCP, that does not exist. You can save a PPro project as a FCP XML but any PPro effects or PPro settings unique to PPro will not come across. If you turn an After Effects project into a FCP project by going through PPro as was suggested then you will NOT get any of the effects you applied to your composition or any of the animation or anything but the footage In and Out points, opacity, rotation and position because that is all that will be moved into PPro because After Effects plug-ins are not compatible with PPro. If there is a dynamic link to an AE project in your PPro project that will not move to FCP at all. You'll get nothing.
    So the long and short of it is if you want the work that you have done in AE to show up in FCP you must render the project. I use ProRez 444 10 bit for any work I do on FCP. You can make a custom Output Module preset to help speed up the workflow.
    If you are new to AE please read this on rendering: After Effects Help | Basics of rendering and exporting
    If you are really new please go through these three tutorials: Basic Workflow

Maybe you are looking for