Unix "top" and Zones
If I had 1 global zone and 3 non-global zones underneath it. And let's say I have 4 cpus and have allocated
2 cpus to 1 non-global zone
1 cpu to 1 non-global zone
1 cpu to 1 non-global zone
Let's now say my 2 cpu zone is running at 100% of the cpu and my other 2 zones are doing nothing.
If I do a "top" on the 2 cpu zone, will I see cpu utilization at 50% or 100%?
frank69m wrote:
Thank you robert. I'm just doing some initial investigation on Zones and how my unix administrators would be managing it. Looks like LDOM might be the way for us.Nothing is perfect -- the trouble with LDOMs is twofold...
1) You have 2 - N full OS footprints running in memory. So you've divided an equitable allocation into RAM / N pieces.
2) You have 2- N full OS storage requirements.
Which compromises can you live with?
Similar Messages
-
Set top and bottom inset spacing values in Text Frame Options via jsx script
I am looking for a way to set the top and bottom inset spacing values only to 2 points in Text Frame Options via a .jsx scrpt.
For years, I have used a script that sets Preferences, such as:
with(app.storyPreferences){
opticalMarginAlignment = false;
opticalMarginSize = 12; // pts
I would like to add the code to this same script that would make Top = 0p2 and Bottom 0p2 but leave Left and Right as 0p0.
Any help would be greatly appreciated.Here is the full .jsx file that we now use to set preferences.
Ideally, this could be modified to include setting any text frame created to have 0p2 inset Top and Bottom, but 0p0 Left and Right:
//ApplicationTextDefaults
//An InDesign CS2 JavaScript
//Sets the application text defaults, which will become the text defaults for all
//new documents. Existing documents will remain unchanged.
with(app.textDefaults){
alignToBaseline = false; // align to baseline grid
try {
// appliedFont = app.fonts.item("Times New Roman");
appliedFont = app.fonts.item("Helvetica");
catch (e) {}
try {
fontStyle = "Medium";
catch (e) {}
autoleading = 100;
balanceRaggedLines = false;
baselineShift = 0;
capitalization = Capitalization.normal;
composer = "Adobe Paragraph Composer";
desiredGlyphScaling = 100;
desiredLetterSpacing = 0;
desiredWordSpacing = 100;
dropCapCharacters = 0;
if (dropCapCharacters != 0) {
dropCapLines = 3;
//Assumes that the application has a default character style named "myDropCap"
//dropCapStyle = app.characterStyles.item("myDropCap");
fillColor = app.colors.item("Black");
fillTint = 100;
firstLineIndent = "0pt";
// firstLineIndent = "14pt";
gridAlignFirstLineOnly = false;
horizontalScale = 100;
hyphenateAfterFirst = 3;
hyphenateBeforeLast = 4;
hyphenateCapitalizedWords = false;
hyphenateLadderLimit = 1;
hyphenateWordsLongerThan = 5;
hyphenation = true;
hyphenationZone = "3p";
hyphenWeight = 9;
justification = Justification.leftAlign;
keepAllLinesTogether = false;
keepLinesTogether = true;
keepFirstLines = 2;
keepLastLines = 2;
keepWithNext = 0;
kerningMethod = "Optical";
kerningValue = 0;
leading = 6.3;
// leading = 14;
leftIndent = 0;
ligatures = true;
maximumGlyphScaling = 100;
maximumLetterSpacing = 0;
maximumWordSpacing = 160;
minimumGlyphScaling = 100;
minimumLetterSpacing = 0;
minimumWordSpacing = 80;
noBreak = false;
otfContextualAlternate = true;
otfDiscretionaryLigature = true;
otfFigureStyle = OTFFigureStyle.proportionalOldstyle;
otfFraction = true;
otfHistorical = true;
otfOrdinal = false;
otfSlashedZero = true;
otfSwash = false;
otfTitling = false;
overprintFill = false;
overprintStroke = false;
pointSize = 6.3;
// pointSize = 11;
position = Position.normal;
rightIndent = 0;
ruleAbove = false;
if(ruleAbove == true){
ruleAboveColor = app.colors.item("Black");
ruleAboveGapColor = app.swatches.item("None");
ruleAboveGapOverprint = false;
ruleAboveGapTint = 100;
ruleAboveLeftIndent = 0;
ruleAboveLineWeight = .25;
ruleAboveOffset = 14;
ruleAboveOverprint = false;
ruleAboveRightIndent = 0;
ruleAboveTint = 100;
ruleAboveType = app.strokeStyles.item("Solid");
ruleAboveWidth = RuleWidth.columnWidth;
ruleBelow = false;
if(ruleBelow == true){
ruleBelowColor = app.colors.item("Black");
ruleBelowGapColor = app.swatches.item("None");
ruleBelowGapOverprint = false;
ruleBelowGapTint = 100;
ruleBelowLeftIndent = 0;
ruleBelowLineWeight = .25;
ruleBelowOffset = 0;
ruleBelowOverprint = false;
ruleBelowRightIndent = 0;
ruleBelowTint = 100;
ruleBelowType = app.strokeStyles.item("Solid");
ruleBelowWidth = RuleWidth.columnWidth;
singleWordJustification = SingleWordJustification.leftAlign;
skew = 0;
spaceAfter = 0;
spaceBefore = 0;
startParagraph = StartParagraph.anywhere;
strikeThru = false;
if(strikeThru == true){
strikeThroughColor = app.colors.item("Black");
strikeThroughGapColor = app.swatches.item("None");
strikeThroughGapOverprint = false;
strikeThroughGapTint = 100;
strikeThroughOffset = 3;
strikeThroughOverprint = false;
strikeThroughTint = 100;
strikeThroughType = app.strokeStyles.item("Solid");
strikeThroughWeight = .25;
strokeColor = app.swatches.item("None");
strokeTint = 100;
strokeWeight = 0;
tracking = 0;
underline = false;
if(underline == true){
underlineColor = app.colors.item("Black");
underlineGapColor = app.swatches.item("None");
underlineGapOverprint = false;
underlineGapTint = 100;
underlineOffset = 3;
underlineOverprint = false;
underlineTint = 100;
underlineType = app.strokeStyles.item("Solid");
underlineWeight = .25
verticalScale = 100;
//Units & Increments preference panel
//Must do this to make sure our units that we set are in points. The vert and horiz
//units that get set default to the current measurement unit. We set it to points
//so we can be sure of the value. We'll reset it later to the desired setting.
with(app.viewPreferences){
horizontalMeasurementUnits = MeasurementUnits.points; // Ruler Units, horizontal
verticalMeasurementUnits = MeasurementUnits.points; // Ruler Units, vertical
//General preference panel
with(app.generalPreferences){
pageNumbering = PageNumberingOptions.section; // Page Numbering, View
toolTips = ToolTipOptions.normal; // Tool Tips
// Not supported in CS4
// toolsPalette = ToolsPaletteOptions.doubleColumn; // Floating Tool Palette
completeFontDownloadGlyphLimit = 2000; // Always Subset Fonts...
try {
//Wrapped in try/catch in case it is run with CS4 and earlier to avoid the error
preventSelectingLockedItems = false; // Needed for CS5+
catch (e) {}
//Type preference panel
with (app.textEditingPreferences){
tripleClickSelectsLine = true; // Triple Click to Select a Line
smartCutAndPaste = true; // Adjust Spacing Automatically when Cutting and Pasting Words
dragAndDropTextInLayout = false; // Enable in Layout View
allowDragAndDropTextInStory = true; // Enable in Story Editor
with(app.textPreferences){
typographersQuotes = true; // Use Typographer's Quotes
useOpticalSize = true; // Automatically Use Correct Optical Size
scalingAdjustsText = true; // Adjust Text Attributes when Scaling
useParagraphLeading = false; // Apply Leading to Entire Paragraphs
linkTextFilesWhenImporting = false; // Create Links when Placing Text and Spreadsheet Files
// Missing following (Font Preview Size, Past All Information/Text Only)
//Advanced Type preference panel
with(app.textPreferences){
superscriptSize = 58.3; // Superscript, size
superscriptPosition = 33.3; // Superscript, position
subscriptSize = 58.3; // Subscript, size
subscriptPosition = 33.3; // Subscript, position
smallCap = 70; // Smallcap
with(app.imePreferences){
inlineInput = false; // Use Inline Input for Non-Latin Text
//Composition preference panel
with(app.textPreferences){
highlightKeeps = false; // Keep Violations
highlightHjViolations = false; // H&J Violations
highlightCustomSpacing = false; // Custom Tracking/Kerning
highlightSubstitutedFonts = true; // Substituted Fonts
highlightSubstitutedGlyphs = false; // Substituted Glyphs
justifyTextWraps = false; // Justify Text Next to an Object
abutTextToTextWrap = true; // Skip by Leading
zOrderTextWrap = false; // Text Wrap Only Affects Text Beneath
//Units & Increments preference panel
with(app.viewPreferences){
rulerOrigin = RulerOrigin.spreadOrigin; // Ruler Units, origin
// These are set at the end of the script after all the changes have been made
// horizontalMeasurementUnits = MeasurementUnits.points; // Ruler Units, horizontal
// verticalMeasurementUnits = MeasurementUnits.inches; // Ruler Units, vertical
pointsPerInch = 72; // Point/Pica Size, Points/Inch
cursorKeyIncrement = 1; // Keyboard Increment, Cursor Key
with(app.textPreferences){
baselineShiftKeyIncrement = 2; // Keyboard Increment, Baseline Shift
leadingKeyIncrement = 2; // Keyboard Increment, Size/Leading
kerningKeyIncrement = 20; // Keyboard Increment, Kerning
//Grids preference panel
with(app.gridPreferences){
baselineColor = UIColors.lightBlue; // Baseline Grid, Color
baselineStart = 48; // Baseline Grid, Start
baselineDivision = 6; // Baseline Grid, Increment Every
baselineViewThreshold = 50; // Baseline Grid, View Threshold
baselineGridRelativeOption = BaselineGridRelativeOption.topOfPageOfBaselineGridRelativeOption; // Baseline Grid, Relative To
gridColor = UIColors.lightGray; // Document Grid, Color
horizontalGridlineDivision = 12; // Document Grid, Horizontal, Gridline Every
horizontalGridSubdivision = 12; // Document Grid, Horizontal, Subdivisions
verticalGridlineDivision = 12; // Document Gird, Vertical, Gridline Every
verticalGridSubdivision = 12; // Document Grid, Vertical, Subdivisions
gridsInBack = true; // Grids in Back
documentGridSnapto = false; // snap to grid or not
documentGridShown = false; // show document grid
//Guides & Pasteboard preference panel
with(app.documentPreferences){
marginGuideColor = UIColors.violet; // Color, Margins
columnGuideColor = UIColors.magenta; // Color, Columns
with(app.pasteboardPreferences){
bleedGuideColor = UIColors.fiesta; // Color, Bleed
slugGuideColor = UIColors.gridBlue; // Color, Slug
previewBackgroundColor = UIColors.lightGray; // Color, Preview Background
minimumSpaceAboveAndBelow = 72; // Minimum Vertical Offset
with(app.viewPreferences){
guideSnaptoZone = 4; // Snap to Zone
with(app.guidePreferences){
guidesInBack = false; // Guides in Back
//Dictionary preference panel
with(app.dictionaryPreferences){
composition = ComposeUsing.both; // Hyphenatin Exceptions, Compose Using
mergeUserDictionary = false; // Merge User Dictionary into Document
recomposeWhenChanged = true; // Recompose All Stories When Modified
// Missing (Lang, Hyph, Spelling, Double Quotes, Single Quotes)
//Spelling preference panel
with(app.spellPreferences){
checkMisspelledWords = true; // Find, Misspelled Words
checkRepeatedWords = true; // Find, Repeated Words
checkCapitalizedWords = true; // Find, Uncapitalized Words
checkCapitalizedSentences = true; // Find, Uncapitalized Sentences
dynamicSpellCheck = true; // Enable Dynamic Spelling
misspelledWordColor = UIColors.red; // Color, Misspelled Words
repeatedWordColor = UIColors.green; // Color, Repeated Words
uncapitalizedWordColor = UIColors.green; // Color, Uncapitalized Words
uncapitalizedSentenceColor = UIColors.green; // Color, Uncapitalized Sentences
//Autocorrect preference panel
with(app.autoCorrectPreferences){
autoCorrect = true; // Enable Autocorrect
autoCorrectCapitalizationErrors = false; // Autocorrect Capitalization
// Missing (Language, Misspelled word pairs)
//Display Performance preference panel
with(app.displayPerformancePreferences){
defaultDisplaySettings = ViewDisplaySettings.typical; // Preserve Object-Level
persistLocalSettings = false;
// Missing (antialiasiing, greek below
//Story Editor Display preference panel
with(app.galleyPreferences){
textColor = InCopyUIColors.black; // Text Color
backgroundColor = InCopyUIColors.white; // Background
smoothText = true; // Enable Anti-Aliasing
antiAliasType = AntiAliasType.grayAntialiasing; // Type
cursorType = CursorTypes.standardCursor; // Cursor Type
blinkCursor = true; // Blink
// Missing (Font, Size, Line Spacing & Theme)
//File Handling preference panel
with(app.generalPreferences){
includePreview = true; // Always Save Preview Images with Doc
previewSize = PreviewSizeOptions.medium; // Preview Size
with(app.clipboardPreferences){
preferPDFWhenPasting = false; // Prefer PDF When Pasting
copyPDFToClipboard = true; // Copy PDF to Clipboard
preservePdfClipboardAtQuit = false; // Preserve PDF Data at Quit
// Missing (Enable Version Cue)
// Optical margin (hanging punctuation, outside margins)
with(app.storyPreferences){
opticalMarginAlignment = false;
opticalMarginSize = 12; // pts
//Wrap Up (do at end of script)
//Units & Increments preference panel
//Must do this to make sure our units that we set are in points. The vert and horiz
//units that get set default to the current measurement unit. We set it to points
//so we can be sure of the value. We'll reset it later to the desired setting.
with(app.viewPreferences){
horizontalMeasurementUnits = MeasurementUnits.picas; // Ruler Units, horizontal
verticalMeasurementUnits = MeasurementUnits.inches; // Ruler Units, vertical
// These two flags are turned off to avoid the error message about
// missing image links when InDesign opens an ad. This can especially
// be a problem when doing batch processes.
with(app.linkingPreferences){
checkLinksAtOpen = false; // checkbox: true/false
findMissingLinksAtOpen = false; // checkbox: true/false -
Will JCO work in Unix Environment and in Webshere 3.5
I need to know whether SAPJCO.jar will work fine in unix environment and also whether is it compactible with websphere version 3.4.
Hi Nikki,
The answer for your question is <b>YES</b>. Unix supports java and Websphere. I think you are aware of of running complex J2EE applications on websphere. If you are able to run java based applications on your server and do not worry you can run sapjco.jar without any problem. Recently we had an integration project [ SAP R/3 and Lotus Domino Server]. It worked out perfectly.
Read this will let you know more,
http://www-128.ibm.com/developerworks/websphere/zones/portal/catalog/doc/appportletbuilder/ApplicationPortletBuilder_v410_wsdd.html
Hope this will solve your problem.
Thanks
Kathirvel -
IPMP configuration and zones - how to?
Hello all,
So, I've been thrown in at the deep end and have been given a brand new M4000 to get configured to host two zones. I have little zone experience and my last Solaris exposure was 7 !
Anyway, enough of the woe, this M4000 has two quad port NICs, and so, I'm going to configure two ports per subnet using IPMP and on top of the IPMP link, I will configure two v4 addresses and give one to one zone and one to the other.
My question is, how can this be best accomplished with regards to giving each zone a different address on the IPMP link.
IP addresses available = 10.221.91.2 (for zone1) and (10.221.91.3 for zone2)
So far, in the global zone I have
ipadm create-ip net2 <-----port 0 of NIC1
ipadm create-ip net6 <-----port 0 of NIC2
ipadm create-ipmp -i net2,net6 ipmp0
ipadm create-addr -T static -a 10.221.91.2/24 ipmp0/zone1
ipadm create-addr -T static -a 10.221.91.3/24 ipmp0/zone2
the output of ipmpstat -i and ipmpstat -a is all good. I can ping the addresses from external hosts.
So, how now to assign each address to the correct host. I assume I'm using shared-ip?
in the zonecfg, do I simply (as per [this documentation|http://docs.oracle.com/cd/E23824_01/html/821-1460/z.admin.task-54.html#z.admin.task-60] ):
zonecfg:zone1> add net
zonecfg:zone1:net> set address=10.221.91.2
zonecfg:zone1:net> set physical=net2
zonecfg:zone1:net> end
and what if I have many many addresses to configure per interface... for example zone1 and zone2 will also require 6 addresses on another subnet (221.206.29.0)... so how would that look in the zonecfg?
Is IPMP the correct way to be doing this? The client wants resilience above all, but these network connections are coming out of different switches thus LACP/Trunking is probably out of the question.
Many thanks for your thoughts... please let me know if you want more information
Solaris11 is a different beast altogether.
Edited by: 913229 on 08-Feb-2012 08:03
added link to the Solaris IPMP and zones docThanks for the reply....
It still didn't work... but you pointed me in the right direction. I had to remove the addresses I had configured on ipmp0 and instead put them in the zonecfg. Makes sense really. Below I have detailed my steps as per your recommendation...
I had configured the zone as minimally as I could:
zonepath=/zones/zone1
ip-type=shared
net:
address: 10.221.91.2
physical=ipmp0
but after it is installed, I try and boot it and I get:
zone 'zone1': ipmp0:2: could not bring network interface up: address in use by zone 'global: Cannot assign the requested address
So, I changed the ip-type to exclusive and I got:
WARNING: skipping network interface 'ipmp0' which is used in the global zone.
zone 'zone1': failed to add network device
which was a bit of a shame.
So, finally, I removed the addresses from ipmp0
ipadm delete-addr ipmp0/zone1
ipadm delete-addr ipmp0/zone2
and set the address in zonecfg together with the physical=ipmp0 as per your recommendation and it seems to be working.
So, am I correct in taking away from this that if using IPMP in shared-ip zones, don't set the address in the global zone, but stick it in the zone config and everyone is happy?
I think this was the only way to achieve multiple IP addresses on one interface but over two ports?
Lastly, why oh why is the gateway address in netstat -rn coming up as the address of the host?
Anyway, thanks for your help.
;) -
I have recently changed lap tops and moved my itunes library successfully.
However I cannot now synce my ipod classic with the new windows pc.
The lap top is not recognising the ipod.
I have spoken to apple and they think its a settings issue on my pc ? I have fully deleted and then reinstalled itunes .
can any one help ? This should be easy to resolve but appears to be a common issue when looking on the web.
Thank youHere is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I upgraded my "new ipad" (the 3rd generation I think) to ios 6.0.1 and now am experiencing various issues.
1- Neither Pages or Numbers will open. I just see a gray screen that says Pages or Numbers at the top and all of my documents are gone. The icon that allows me to create a new document also does not appear. I went to icloud.com to see whether my documents still existed, which brings me to the 2nd problem.
2- It appears that all of my Pages documents are still on icloud, but all of my Numbers documents are gone. There were only about 10, but I access 2 of them nearly every day, so this is a big issue for me.
I went into Settings and all of the icloud information is correct and it "Documents & Data" is on. When I look at the storage, I see the Pages documents but not the Numbers ones. The next thing I did was turn my ipad off and back on, but this didn't fix anything. Since my Pages documents are still on icloud, I then tried to delete the Pages app from the ipad so that I could reinstall it, which resulted in the 3rd problem.
3- I cannot delete any apps. I can get all of the icons to shake and the small x IS available, but everything freezes when I click it. I can't do anything at that point except reset the ipad or wait until it eventually restarts itself. I've tried this with Pages as well as multiple other apps, all with the same result. I've also tried downloading a new app (which worked fine) and then deleting that one, but I got the same result.
3a- A small related issue to this that I am far less concerned about is that when the ipad restarts itself, it comes back on and the screen is really dark and I can barely make out what appears on the screen. If I enter my password right away, it stays that way until I go into Settings - Brightness & Wallpaper and touch the brightness setting (although I'm not actually changing the setting because it already shows that the brightness is turned up a little over halfway). If I don't enter my password right away and let it go completely dark, then click the home button, the brightness is fine.
So now I'm stuck. My guess is that I will need to restore it, but wanted to check before I take that step. Unfortunately, my laptop is on its deathbed so I haven't been synching my ipad to it and I fear my Numbers documents are gone forever. I'd like to try everything I can to fix these issues before doing the restore in hopes that I can get the Numbers documents back.
Any suggestions for any or all of these problems?Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever. -
when I close out a website it goes to my desk top and then tells me firefox is already running and I have to shut down my system and bring it back up and wait to log back in. It's quite frustrating.
Try Ctrl>ALT>DEL then click Start Task Manager, then find the process firefox.exe, then click end program, then try opening Firefox again. <!-- click applications > new task.... > explorer.exe --> done! If that doesn't work, then try re-installing Firefox or going to this link to safe mode area and click continue to safe mode and then try and exit, if this problem still occurs then disable extensions and plugins
-
I started using my external monitor with my macbook pro and as soon as I plug it in it to the monitor it adjusts the screen by zooming out a bit and creating about 3/4 of an inch black borders on the top and bottom of the screen. But these dont show up on the monitor so I assumed it was fine. But when I took it off the monitor, the borders were still there like it was still on the monitor. Any hellp? Its starting to mess with my eyes haha.
Hi aefulcher,
It sounds like you had the external display set to mirror the internal display so the resolution(s) were changed to match each other.
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
Check if the current resolution matches your screen's natiive resolution.
Thank you for visiting Apple Support Communities.
Nubz -
How can I get Firefox to fill my screen? There are gaps in the top and bottom of my screen, thanks.
I dropped my laptop recently and messed up the hard drive so after installing new hard drive I reloaded win 7 and Mozilla Firefox. When Firefox loads up there is a 1" plus gap on the top and a half inch gap at the bottom of all pages. How can I get the browser to fill the screen? Thanks.
This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered -
I have an IMac. I put a folder on the desk top and now want to delete it. The folder seems to be locked. I went into Get Info and attemted to unlock the folder and delete it. Won't go away. There is nothing in the folder. How do I unlock this folder and delete it? When I try to delete it, I'm asked for my password which I put in and is accepted, but will not delete the folder. Any help would be great.
If you are sure there is nothing in it, download trashit, a useful free app. That will dispose of it.
Download Trash It! for Mac - Force-empty your trash can. MacUpdate.com -
we bought this new air mini pad i used a very old lap top now i trying to get it to work on my apple desk top and it wants the other i so fustrated our son tryed no luck and i am trying for hours nothing on the air works only the mail and face book i not conected to i tunes even thought i keep putting in my info
Are you using version 11.x of iTunes on your computers?
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
I have tried to install home sharing between my desk top and lap top. I can only see the music I have bought from iTunes on my lap top. Is this normal? I thought I would be able to see my entire library.
Yes I tried that. I finally turned off all home sharing settings, shut down my desktop and found them in my account settings in the store on the cloud. So at that point I just had it download everything. But I suspect that with the ipad somehow being on, the store was saying I had already received them? Regardless, my trip today whilst running errands, I was rocking out to vintage Police music! Thank you so much for responding.
-
How to suppress blank line in top and end of portlet
I created one small report (portlet) however when i execute this one; i remarked there is one blank line in the top
and another one at the end of the report. How can i eliminate these lines. I need this space to be able to see
a lot of information in the same page.
I use portal 3.0.9.2After developping a lot of portlet and read a lot of TAR on metalink and a lot of message on OTN i discovered the solution.
Wnen you create one report with the wizard there is no way to erase the first line ( header ) in the result.
Second for the last line of the results ( blank line ) ; the problem is with netsacpe 4.75 ( no problem with internet explorer )
with Netscape you will see one blank line and not with internet explorer ( confirm with Oracle support )
Anyway in the place of developping one report with the wizard ; you can copy and paste your sql statement of your report
inside one dynamic page and control all you want.
I will give you one example than i created; i hope it will help other persons like me
( we need to read a lot of thing to do something really simple with portal )
<HTML>
<HEAD>
<style type="text/css">
<!--
.TabFontText {
font-family: Arial, Helvetica;
font-size: 9pt;
-->
</style>
</HEAD>
<BODY>
<ORACLE>
begin
htp.p('<table cellspacing=0>');
for c in ( select '<a TARGET="_blank" HREF="http://'||ssdw_portal.pkg_globl.
fnc_get_server_port||'/pls/portal30/docs/FOLDER/SSDW_AIDE/'||replace(item.name,
' ','+')||'">'||item.display_name||'</a>' filename , to_char(item.updatedate,'dd/mm/yyyy hh24:mi') last_updated
FROM portal30.wwsbr_all_items item ,
portal30.wwsbr_all_folders folder
WHERE folder.name = 'SSDW_AIDE'
and folder.caid = item.caid
and folder.id = item.folder_id
and item.language = 'us'
and item.name like 'GUIDE%ANG%'
order by item.name ) loop
htp.p('<tr>');
htp.p('<td bgcolor=#CCCCCC width=325>');
htp.p('<font class="TabFontText" >');
htp.p(c.filename);
htp.p('</td>');
htp.p('</font>');
htp.p('<td bgcolor=#CCCCCC width=125>');
htp.p('<font class="TabFontText">');
htp.p(c.last_updated);
htp.p('</td>');
htp.p('</font>');
htp.p('</tr>');
end loop;
htp.p('</table>');
end;
</ORACLE>
</BODY>
</HTML>
Marc Fortin
[email protected] -
How can I print the top and bottom halves of 11x17 PDF on 8.5x11?
I have a multi-page 11x17 PDF of quiz cards designed to be printed double-sided so that a question appears on one side and the answer on the other side. (Page 1 has the questions; page 2 has the answers.) My printer is 8.5x11 so I would like to print the top half of 11x17 page 1 onto 8.5x11 page 1 and the bottom half of 11x17 page 1 onto 8.5x11 page 2. Then I will flip the 8.5x11 pages over and repeat the process, this time printing 11x17 page 2.
Is there a way to print the top and bottom halves of an 11x17 PDF onto two 8.5x11 pages?
Thanks!The easiest solution I know of requires you to have a copy of Adobe InDesign. You can easily layout PDFs within InDesign in the configuration you want and create a new PDF.
I don't know any way to print it directly in that layout, unfortunately. -
Setting up page printout format for pdf on a Mac OS/X Snow Leopard Mac Pro. Printer is HP 8500A OfficeJet Pro Plus bought after July 14, 2011 serial number- CN141CK7QM
When I print to file as a pdf I am getting the first page correctly but subsequent pages are getting clipped along the top and the right margins.
I don't have this problem with my IBook 4.0
The issue is formatting an html page to a pdf when the print request is asking for a pdf or when the print request is to the printer.
The url to my HP Office jet Pro 8500A Plus is:
mdns://Officejet%20Pro%208500%20A910%20%5B530E4F%5D._pdl-datastream._tcp.local./?bidi
I have a IBook G4 and I do not have any of this problem.
I have specified a default paper size of "USLetter".
This printing issue is a new one that occurred since I started the Firefox updates after Firefox 6.0 series.
I am checking with HP on this issue. Prior to the HP8500A (installed in July 2011) I did have a HP6180 Officejet for several years without encountering such a conflict.
So my second question is; Are there Firefox printing conflicts with the HP 8500A printers?
EHW 091211Joanna,
It seems that Illy (still) moves in (ever new) mysterious ways.
I was surprised to see that you got away with your French word, but the hat part must have hidden the first part from the nanny filter. The first part by itself would have become asterisks.
Maybe you are looking for
-
How to make arrays or repeat objects in circle?
Hello, 1 - How to make arrays without copying and pasting? Fig-1 2 - how to create objects repeated in circles? Fig-2 Regards and Thanks
-
Error retrieving data in Oracle BI 11g from DB2 AS/400
Hello everybody, In my Oracle BI 11g environment I want to have data coming from a DB2 AS/400 database. Retrieving the tables from the database in BI Administration and building the repository works fine. But as soon as I want to see the data (from t
-
Placing Image - 'Sort by' problems
I am having an issue with my image placement in all adobe programs. When I go to 'place' an image within photoshop or indesign, my file directory appears and is sorted by last modified. I need it sorted by name (which is usually the default). I can c
-
Is it possible to have an album or smart album that uses pictures from multiple libraries?
-
Has anyone put card reader into cd/dvd drive by mistake ? If so how do i get it out without breaking drive