Unknown group 'network' in message bus configuration file

I observe the above warning which appears right after the 'Starting DBUS system message bus' message during initialisation.
Should I be concerned with this?
How to I clear it so that my init scripts are nice and tidy?

pacman -S filesystem
And your done

Similar Messages

[SOLVED]Unknown group "socketsentry" in message bus configuration file

If you -like me- come along this error message when updating KDE follow this few steps to have the PLASMA Widget SocketSentry up and running:
1. launch KUser
2. add a new group called socketsentry and add all your users to it - at least all you want to be able to run this plasmoid.
3. reboot
Look at here: http://code.google.com/p/socket-sentry/ … l?id=10#c0 and here http://code.google.com/p/socket-sentry/ … ed_with_un for more info about his.
Arch rules! :D:D:D

Hey! Thank you very much :-) I hope dbus will run OK now

Unknown username "policykit" in message bus configuration file

dev@null> sudo dbus restart /usr/lib
:: Stopping D-BUS system messagebus [DONE]
:: Starting D-BUS system messagebus [BUSY]
Unknown username "policykit" in message bus configuration file
[DONE]
dev@null>
Well policykit has been changed to polkits in arch (AFAIK) so the friggin' policykit group shouldn't indeed be there anymore.
I checked with 'pacman -Ql dbus-core' but couldn't find the configuration file.
This is just a warning I'm gettin', but anybody know this configuration file? Wouldn't wanna create this deprecated group manually.
Last edited by algorythm (2010-03-09 15:08:16)

Try to find that config file where that group so:
# cd /etc/dbus-1/system.d
# find . | xargs grep 'policykit'
and change it.
Hope this helps.
Antonio

After Reinstallation: avahi user and message bus errors

I did a re-install of OSX 10.6.3 on a working copy, updated all software and did a permission repair. I however now get these console errors that did not happen before:
11.05.10 11:59:06 com.apple.SystemStarter[29] Starting D-Bus System Bus
11.05.10 11:59:06 com.apple.SystemStarter[29] Unknown username "avahi" in message bus configuration file
11.05.10 11:59:06 com.apple.SystemStarter[29] Failed to start message bus: Could not get UID and GID for username "messagebus"
The re-installation forgot to set something that was working on my system before. Could anyone please help me to correct this issue by hand?
Cheers,
Reto

In the console window during boot. I've now done a clean install of OSX and the errors went away. They were entirely related to the process of re-installing the system over my existing copy. It seems that the re-installation is not entirely complete.
Reto

VM Unknown (Inaccessible) - Configuration file cannot be found

I am running a single VM on a small HP Proliant server with ESXi 5.0 which boots off a thumb drive
The box has two drives mirrored with a raid card
The machine was powered down safely
The drives were removed
The machine was accidentally powered on without the drives (yes he is in the corner)
When I put the drives back in and powered up the box vSphere showed the VM as "Unknown (inaccessible)" with the EVENTS description "Configuration file cannot be found". The details shows "Configuration file for Unknown on localhost.localdomain in ha-datacenter cannot be found"
I powered the machine down and went into the raid card bios configuration where i observed a mirror sync in progress. This continued for a little over 4 hours and finally it reported the drives as "optimal".
I rebooted the box but vSphere still shows the VM as Unknown (inaccessible).
I thought I was being clever installing our small dental practice server onto a VM but suddenly realise I am way out of my depth here. Is there any hope to get the VM going and can anyone point me in the right direction?
Many thanks

Hi,
Unfortunately I am experiencing the same issue with the difference that I have restored iSCSI access to the LUN and I can browse my datastore and see the files within. but esx 5.5 host still displays all the VMs in that datastore as "inaccessible". I have tried a bunch of possibilities without any positive result, including:
1. removing the VMs from inventory and adding them again
2. delete files in /var/lib/vmware/hostd/stats
3. Rename vmInventory.xml and adding the VMs again
The one thing that I have noticed which makes me more fightened is that I cannot download or copy the existing VM files within my datastore but I am able to create new ones!
Any suggestions that may save me?

Where is the configuration file for my message server ?

Hi:
I am in charge for a message server version upration from 5.1 to 5.2, My question is very simply , I can not find configuration file for message server,when I execute start-msg [smtp | imap | pop | store | http] which configuration file it will read ?
and /usr/iplanet/server5/slapd-www/config/slapd.conf
is my ldap server configuration file ?
and the following three file is mta related file ?
/usr/iplanet/server5/msg-www-1/imta/config/dispatcher.cnf
/usr/iplanet/server5/msg-www-1/imta/config/job_controller.cnf
/usr/iplanet/server5/msg-www-1/imta/config/imta.cnf
My question is very simple and I am a new junior for ims . Anyway Thanks !!
$ imsimta version
iPlanet Messaging Server 5.2 (built Feb 21 2002)
libimta.so 5.2 (built 15:07:23, Feb 21 2002)
SunOS ctidml 5.8 Generic_108528-27 sun4u sparc SUNW,Ultra-5_10

There is NO ONE messaging server configuration file.
The store configuration is read from the configuration ldap server on startup, and cached in temporary files, msg.cnf and local.cnf. Do not attempt to edit these files, as that won't work.
Use the configutil utility to see what the store configuratin is

The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

All,
I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
groups for different applications, just as I'm trying here with Office 2013.
Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
and publish all applications within a package to a user regardless of whether they are in the correct group or not?
The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
Thanks

Nicke,
The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
on the machine when delivered?
<Configuration>
<Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
 <Product ID="ProPlusVolume">
 <Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
 </Product>
</Add>
</Configuration>
3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
Dan,
Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
From what I’ve read / watched I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
(I think).
The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
Is my understanding above correct or have I missed some options / methods?
If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
this use case is the AppV method one which will be unsuitable?
Thanks

[svn] 3519: Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service .

Revision: 3519
Author: [email protected]
Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
Log Message:
Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xml

Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I thought the same too, looks like its not just me having this issue, hope Apple do something soon. Thanks for your help

Where is the Network configuration file?

I have a G4 Laptop that connects readily to the University Hotspot as well as to my home wifi router. However the College would prefer I use the admin network which uses the same wifi hardware but is secure, unlike the hotspot network. The system is predominantly populated with XP machines and the IT folks have attempted to get me on the admin network but authentication with WPA Personal, WPA Enterprise, WPA2 Personal, and WPA2 Enterprise do not work. When I try to use Airport Assist or diagnostics nothing helps. If I ask Airport to see the "Configuration" file it sends me to an area of Microsoft related files which is an enigma to me.I suspect something in the configuation file, wherever it is, is important and perhaps similar to what XP uses. Does anyone have any information about hooking a Leopard G4 into a windows based network?

Raymond Zachary wrote:
I have a G4 Laptop that connects readily to the University Hotspot as well as to my home wifi router. However the College would prefer I use the admin network which uses the same wifi hardware but is secure, unlike the hotspot network. The system is predominantly populated with XP machines and the IT folks have attempted to get me on the admin network but authentication with WPA Personal, WPA Enterprise, WPA2 Personal, and WPA2 Enterprise do not work. When I try to use Airport Assist or diagnostics nothing helps. If I ask Airport to see the "Configuration" file it sends me to an area of Microsoft related files which is an enigma to me.I suspect something in the configuation file, wherever it is, is important and perhaps similar to what XP uses. Does anyone have any information about hooking a Leopard G4 into a windows based network?
You shouldn't have to deal with any such configuration files. Pull down the AirPort menu bar item. In the resulting list you should see the "admin network". Select that, then enter the supplied password. If that doesn't work, check and report exactly what happened.

In system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, i cloud user and groups network and more

in system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, iCloud user and groups network and more.
Genius bar told me to erase the harddisk and install OSX Maverick again. This has not changed the problems with the system settings

You need to Repartition the drive as One partition which will erase all data from it and then reinstall OS X. then with the initial setup system you chose the language on the first screen that comes up. That sets the language for the whole system.
There is no other way of completely removing certain information created by a previous owner. this hold strue whether you are selling or give a Mac to someone.
To do the repartitioning you need to use the Online Internet Recovery system, if the Mac came with Lion 10.7 or above, or from the original system reinstall discs that came with it when it was new.

HT2914 Hello: I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080,

Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, Paul

You can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec.

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

[svn:bz-trunk] 15090: Bug: BLZ-506 - Unexpanded {0} in error message from LocalFileResolver related to services .configuration.file

Revision: 15090
Revision: 15090
Author:   [email protected]
Date:     2010-03-29 01:55:44 -0700 (Mon, 29 Mar 2010)
Log Message:
Bug: BLZ-506 - Unexpanded in error message from LocalFileResolver related to services.configuration.file
QA: No - I already tested.
Doc: No
Checkintests: Pass
Details: Applied customer's patch.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-506
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/LocalFileResolver.java
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

Which files do you have in the defaults\pref folder in the Firefox program folder?
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
See also "Other solutions":
*http://kb.mozillazine.org/Preferences_not_saved
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Unknown group 'network' in message bus configuration file

Similar Messages

Maybe you are looking for