Unknown type TABLE for element Error

This question i am posting on behalf of one of my friend
In RF transaction, created a screen that contains table control. The table control has created using wizard
If we run the transaction with in SAPGui its working fine. After creating Internet service, and publish and run thru internet explorer its giving the following said Error
" Unknow type TABLE for element IT_PRODUCT"
I checked the controls statement for table view , its there in the code Here IT_PRODUCT is tableview for tablecontrol
Any Info ?
a®

Solved.
The problem is because , the table control had been created thru "Table Control Wizard" , solved by creating the table control using SE51 has resolved the issue.
Strange ?
May be because wizard unncessary creating lot of HTML code while publishing
a®

Similar Messages

Use global temp table for DML error logging

our database is 11.2.0.4 enterprise edition on solaris 10
we are wondering if anyone has an opinion of or has done this before, to use a global temp table for DML error logging. We have a fairly busy transactional database with 2 hot tables for inserts. The regular error table created with dbms_errlog has caused many deadlocks which we don't quite understand yet. we have thought using global temp table for the purpose, and that seemed to work, but we can't read error from the GTT, the table is empty even reading from the same session as inserts. Does anyone have an idea why?
Thanks

The insert into the error logging table is done with a recursive transaction therefore it's private from your session which is doing the actual insert.
Adapted from http://oracle-base.com/articles/10g/dml-error-logging-10gr2.php
INSERT INTO dest
SELECT *
FROM source
LOG ERRORS INTO err$_dest ('INSERT') REJECT LIMIT UNLIMITED;
99,998 rows inserted.
select count(*) from dest;
COUNT(*)
    99998
SELECT *
FROM err$_dest
WHERE ora_err_tag$ = 'INSERT';
1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    1000        Description for 1000
1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    10000        Description for 10000
1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    1000        Description for 1000
1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    10000        Description for 10000
rollback;
select count(*) from dest;
COUNT(*)
        0
SELECT *
FROM err$_dest
WHERE ora_err_tag$ = 'INSERT';
1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    1000        Description for 1000
1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    10000        Description for 10000
1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    1000        Description for 1000
1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    10000        Description for 10000

Condition type table for mm

hw to get a condition type table for mm?i
i want to get the records from eban,ebkn,esll,esuh, and some more fields (service currency,service condition type,service price and service price unit) but the functional consultant people dnt know wr these 4 fields are? i have got records from eban , ebkn ,esll
and esuh.but i dnt know hw to get the another four fields .i m doing report for mm module.these four fields are condition from condition table .

Hai Safi,
U compare Tables Ekbe-Knumv , Ekko-Knumv , From Table Konv-Knumv
U will get all the condition types(Kschl) But Konv is a Cluster Table U have to write Seprate Select query.
Reward Points If Usefull,
Thanks & Regrds.
Shiva .

Output Type ZF01 for Billing Error...

Hi Experts,
I am trying to configure the OUTPUT Type ZF01 for Archiving Billing docuemnts using Application V3. At present output type is configured with all paramenters for archiving and when we are testing that we are facing below error.
File name
OD0NP-WAG040\arch_exch\ is unknown
Message no. SG001
Diagnosis
No entry was found in the conversion table for the logical file name
OD0NP-WAG040\arch_exch\.
Procedure
Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
We have the above file path configured and it has all access for sap system and users.
We have configured required details in NACE t.code and not sure if there is some thing else we need to take care off, so appreciate your help around this.
--Thanks
Pankaj

Hi,
Is there any report (like RSNAST00) which needs modification in order to make the output type work as required.
Appreciate your quick help around this.
--Thanks
Pankaj

No argument of type TABLE frm-10764 error

I'm trying to base a data block on a procedure. When I use a cursor ref there is no problem, however when I use a table I get the error no argument of type TABLE or REFCURSOR (frm-10764). In the package I have defined a table and I use an in out variable of the table type defined. In the block I reference the package.procedure and I get the above message. Can any one tell me what I'm doing wrong??
Thanks
Simon

Hello,
If i understood u guys correctly then here is example and it is working perfectly with F5.0 & O8.0. May be u will find some un-necessary code. pl. ingore it.
Step1- Create a stored Package Specification with declaration of ur REF Cursor.
package plsql_tab IS
--Declare REF Cursor Type
type plsql_refcur is ref cursor;
end plsql_tab;
Step2- Create ur own stored procedure and pass REF cursor as an argument.
procedure proc1
(p_cur in plsql_tab.plsql_refcur)
is
k pls_integer := 0;
var1 number;
var2 varchar2(50);
begin
loop
fetch p_cur into var1, var2;
exit when k>=10 or p_cur%notfound;
insert into plsq_tbl values
(k,'In Proc1 : '| |var2);
dbms_output.put_line('In Proc1 : '| |var2);
end loop;
close p_cur;
end;
Step3- Create a form, write form procedure like below and then call this procedure on WHEN-Button-Press or anywhere u needed.
procedure proc2 is
--declare REF Cursor
cur_plsql plsql_tab.plsql_refcur;
begin
--Open REF Cursor for a given Qry
open cur_plsql for select * from plsq_tbl
where rownum < 10;
--Pass REF Cursor as an IN Parameter
proc1(cur_plsql);
--Close REF Cursor
close cur_plsql;
end;
Hope it will help u.
Thanks & Regards,
Anil

Table for COFC error messages

Hi,
There are 1000+ orders are in error when we check thru COFC . As it's a tedious job to check error message for each error record, Is there any table to get error text messages for all error records?
Thanks in advance
Murali

Hi,
what you see in COFC is nothing else than the AFRC.table entries. Nevertheless the message itself is not stored in AFRC itself.
Process COFC-records by marking all of them and tick "save", the ones that can be posted nor are posted only the "real" errors remain.
You can schedule a job running CORUPROC report, to do this automatically.
Best regrads, Christian

Multi-level nested tables for repeatable XML Elements

Hi there,
Suppose we have a XML Schema „ASchema“ like this (XMLDB schema annotations are left out for simplicity):
<xs:schema xmlns:xs=" .... " />
<xs:element name=“A“>
     <xs:complexType>
          <xs:sequence>
               <xs:element name=“B“ maxOccurs=“unbounded“/>
                    <xs:complexType>
                         <xs:sequence>
                              <xs:element name = “C“ maxOccurs=“unbounded“/>
                         </xs:sequence>
                    </xs:complexType>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
</xs:element>
</xs:schema>
After registering this schema in Oracle, I can define a table like this:
CREATE TABLE ATable
id NUMBER,
doc XMLTYPE
XMLTYPE COLUMN doc
XMLSCHEMA “ASchema“ ELEMENT “A“
VARARRAY doc.“XMLDATA“.“B“ STORE AS TABLE “BTable“
((PRIMARY KEY (NESTED_TABLE_ID, SYS_NC_ARRAY_INDEX$)) ORGANIZATION INDEX)
This creates a nested table "BTable" within the table "ATable". So far so good, I can use this nested table to gain faster access on every possible subelement of Element B when I set an appropriate index.
I now want to create another nested table for element “C“ like this:
DROP TABLE ATable;
CREATE TABLE ATable
id NUMBER,
doc XMLTYPE
XMLTYPE COLUMN doc
XMLSCHEMA “ASchema“ ELEMENT “A“
VARARRAY doc.“XMLDATA“.“B“ STORE AS TABLE “BTable“
((PRIMARY KEY (NESTED_TABLE_ID, SYS_NC_ARRAY_INDEX$)) ORGANIZATION INDEX)
VARARRAY doc.“XMLDATA“.“B“.“C“ STORE AS TABLE “CTable“
((PRIMARY KEY (NESTED_TABLE_ID, SYS_NC_ARRAY_INDEX$)) ORGANIZATION INDEX)
But this statement fails with the error message something like „ ... no such attribute ... „
And here's my question: is it possible to create nested tables for repeatable XML Elements that are subelements of other repeatable XML Elements ? And if so, how can I do it ?
Thank you very much in advance
Jan

Found a (partial) solution myself:
If you add the attribute xdb:storeVarrayAsTable="true" to the root element of the XML schema, Oracle XMLDB generates nested tables for all repeatable XML Elements while registering the XML schema.
Unfortunately, the names of these nested tables are system-generated, hence it's a bit uncomfortable to set indices on them. You can find out the names of these nested tables as follows:
select table_name, parent_table_name, parent_table_column from user_nested_tables;
Further information on that subject is supplied in the following thread:
Re: default tables for elements with maxoccurs > 1
It would be nice if there was a way to name the generated nested tables via appropriate XMLDB schema annotations.
regards
Jan

ORA-23309: object UMESH.PRODUCT_MASTER of type TABLE exists

Hi,
I have two schema on the two servers for replication replication is working fine.
i export one schema to another so all the tables exists at both the sites.
I am adding objects in the replication group using oracle enterprise manager
console.
some of the tables added fine.
but some gives me error like.
ORA-23309: object UMESH.PRODUCT_MASTER of type TABLE exists
before adding this objects in the group i do like
SQL> SELECT oname FROM DBA_REPOBJECT ;
ONAME
AC_ACCOUNT
AC_ACCOUNT$RP
AC_ACCOUNT$RP
AC_ACCOUNT_MASTER
AC_ACCOUNT_MASTER$RP
AC_ACCOUNT_MASTER$RP
6 rows selected.
at both the sites.
when i add product_master in the group then entries becomes like
SQL> SELECT oname FROM DBA_REPOBJECT ;
ONAME
AC_ACCOUNT
AC_ACCOUNT$RP
AC_ACCOUNT$RP
AC_ACCOUNT_MASTER
AC_ACCOUNT_MASTER$RP
AC_ACCOUNT_MASTER$RP
PRODUCT_MASTER
7 rows selected.
but with the error in
and when generate replication support.
SQL> select status,request,message,oname from dba_repcatlog;
STATUS         REQUEST
MESSAGE
ONAME
ERROR          CREATE_MASTER_REPOBJECT
ORA-23309: object UMESH.PRODUCT_MASTER of type TABLE exists
PRODUCT_MASTER
ERROR          CREATE_MASTER_REPOBJECT
ORA-23309: object UMESH.PRODUCT_MASTER of type TABLE exists
PRODUCT_MASTER
STATUS         REQUEST
MESSAGE
ONAME
ERROR          GENERATE_INTERNAL_PKG_SUPPORT
ORA-23308: object UMESH.PRODUCT_MASTER does not exist or is invalid
PRODUCT_MASTER
ERROR          GENERATE_INTERNAL_PKG_SUPPORT
ORA-23308: object UMESH.PRODUCT_MASTER does not exist or is invalid
STATUS         REQUEST
MESSAGE
ONAME
PRODUCT_MASTER
ERROR          GENERATE_INTERNAL_PKG_SUPPORT
ORA-23308: object UMESH.PRODUCT_MASTER does not exist or is invalid
PRODUCT_MASTER
but in the same situation other objects are working fine.i am fed up with this error.
any help will be appreciated.
Thanks
Umesh
null

thanks hament
I have two schema my master definition site have all the objects but second master
site. have no object.
i use these command like
this is at master definition site.
SQL> BEGIN
2     DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3       gname => '"AA"',
4       qualifier => '',
5       group_comment => '');
6 END;
7 /
PL/SQL procedure successfully completed.
SQL> ed
Wrote file afiedt.buf
1 BEGIN
2     DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3       gname => '"AA"',
4       type => 'TABLE',
5       oname => '"PRODUCT_MASTER"',
6       sname => '"UMESH"',
7       copy_rows => TRUE,
8       use_existing_object => FALSE);
9* END;
SQL> /
PL/SQL procedure successfully completed.
SQL> commit;
Commit complete.
SQL> BEGIN
2     DBMS_REPCAT.ADD_MASTER_DATABASE (
3        gname => 'AA',
4        master => 'neo.world',
5        use_existing_objects => FALSE,
6        copy_rows => TRUE,
7        propagation_mode => 'ASYNCHRONOUS');
8 END;
9 /
PL/SQL procedure successfully completed.
SQL> COMMIT;
SQL> select source, status, master,sname, request, oname, type, message from dba_repcatlog;
SOURCE
STATUS
MASTER
SNAME                          REQUEST
ONAME                          TYPE
MESSAGE
LOCAL.WORLD
SOURCE
STATUS
MASTER
SNAME                          REQUEST
ONAME                          TYPE
MESSAGE
ERROR
SOURCE
STATUS
MASTER
SNAME                          REQUEST
ONAME                          TYPE
MESSAGE
NEO.WORLD
SOURCE
STATUS
MASTER
SNAME                          REQUEST
ONAME                          TYPE
MESSAGE
UMESH                          CREATE_MASTER_REPOBJECT
SOURCE
STATUS
MASTER
SNAME                          REQUEST
ONAME                          TYPE
MESSAGE
PRODUCT_MASTER                 TABLE
SOURCE
STATUS
MASTER
SNAME                          REQUEST
ONAME                          TYPE
MESSAGE
ORA-00942: table or view does not exist
SOURCE
STATUS
MASTER
SNAME                          REQUEST
ONAME                          TYPE
MESSAGE
but according to me this table must be created at the second master site.
which is main issue i am facing.
and if i made product_master at second master site manually
then execute this at master defination site.
SQL> BEGIN
2     DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3       gname => '"AA"',
4       type => 'TABLE',
5       oname => '"PRODUCT_MASTER"',
6       sname => '"UMESH"',
7       copy_rows => TRUE,
8       use_existing_object => TRUE);
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-23309: object "UMESH"."PRODUCT_MASTER" of type TABLE exists
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 2552
ORA-06512: at "SYS.DBMS_REPCAT", line 562
ORA-06512: at line 2
SQL> /
PL/SQL procedure successfully completed.This is very strange if the table exists then error and if
it doesn't then error.
Thanks
Message was edited by:
Umesh Sharma

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay.

Dynamic Table UI Element with different data type for each cell

Hi Experts,
I have a problem with a dynamic Table UI Element in Web Dynpro ABAP. I have the following coding:
METHOD set_col_row .
TYPE-POOLS: icon.
DATA:
    lv_node         TYPE REF TO if_wd_context_node,
    lv_node_info    TYPE REF TO if_wd_context_node_info,
    lv_element      TYPE REF TO if_wd_context_element,
    lt_attributes   TYPE wdr_context_attr_info_map,
    lv_table        TYPE REF TO cl_wd_table,
    lv_table_column TYPE REF TO cl_wd_table_column,
    lv_text_view    TYPE REF TO cl_wd_text_view,
    lv_image TYPE REF TO cl_wd_image,
    lv_text_edit TYPE REF TO cl_wd_text_edit,
    lv_header       TYPE REF TO cl_wd_caption,
    attribute       LIKE LINE OF lt_attributes,
    lv_index       TYPE string,
    lv_cur_row         TYPE i,
    path            TYPE string,
    lv_value           TYPE string,
    attr_name       TYPE string,
    l_trc_point_id TYPE string,
    l_num_cols      TYPE string,
    l_num_rows      TYPE string,
    lv_text         TYPE string,
    lv_index2 TYPE i,
    lr_ress_selections TYPE REF TO /its/di_2_cpr_ress_selections,
    lt_comp_tab TYPE cl_abap_structdescr=>component_table,
    ls_comp_tab LIKE LINE OF lt_comp_tab,
    lv_count TYPE i,
    lv_col_count TYPE i,
    lv_col_count_read TYPE i,
    lv_index_read TYPE i,
    lv_num_cols_minus_1 TYPE i,
    lv_bind_lv_value TYPE string,
    wd_standard_cell TYPE REF TO cl_wd_table_standard_cell,
    lv_data_count TYPE i,
    lv_data_count_str TYPE string,
    wd_table_column TYPE REF TO cl_wd_table_column,
    lv_column_id TYPE string.
FIELD-SYMBOLS:
     TYPE ANY.
Instanz der Klasse /ITS/DI_2_CPR_RESS_SELECTIONS
lr_ress_selections = /its/di_2_cpr_ress_selections=>factory( ).
ASSIGN lr_ress_selections->gr_table->* TO gt_comp_tab.
ls_comp_tab-name = 'SUMME'.
APPEND ls_comp_tab TO lt_comp_tab.
ls_comp_tab-name = 'CELL_VARIANT'.
APPEND ls_comp_tab TO lt_comp_tab.
CLEAR ls_comp_tab.
l_num_rows = num_rows + 1.
CONDENSE l_num_rows.
l_num_cols = num_columns + 1.
CONDENSE l_num_cols.
UI-Element 'TABLE'
lv_table ?= wd_this->m_view->get_element( 'TBL_TABLE' ).
lv_table->remove_all_columns( ).
Kontext-Knoten 'TABLE'
lv_node = wd_context->get_child_node( 'TABLE' ).
lv_node_info = lv_node->get_node_info( ).
lv_node_info->remove_dynamic_attributes( ).
attribute-type_name = 'STRING'.
lv_num_cols_minus_1 = num_columns - 1.
Für jede Spalte einmal tun
DO lv_num_cols_minus_1 TIMES.
    lv_index = sy-index + 1.
    CONDENSE lv_index.
    lv_table_column = cl_wd_table_column=>new_table_column( ).
    lv_column_id = lv_table_column->id.
Spaltenüberschriften setzen
    IF lv_index EQ 1. "Beim ersten Durchlauf --> erste Spalte = "Ressourcen"
      lv_text = text-010.
      sy-index = 0.
    ELSE. "Danach für jede weitere Spalte eine Zeile aus der gt_comp_tab nehmen
      lv_index_read = lv_index - 1.
      READ TABLE lt_comp_tab INDEX lv_index_read INTO ls_comp_tab.
      lv_text = ls_comp_tab-name.
      lv_header = cl_wd_caption=>new_caption( text = lv_text ).
      lv_table_column->set_header( lv_header ).
    ENDIF.
    CONCATENATE 'TABLE.A' lv_index INTO path.
    lv_text_view = cl_wd_text_view=>new_text_view( bind_text = path ).
    lv_table_column->set_table_cell_editor( lv_text_view ).
    lv_table_column->bind_selected_cell_variant( 'TABLE.CELL_VARIANT' ).
    lv_table->add_column( lv_table_column ).
    wd_table_column ?= wd_this->m_view->get_element( lv_column_id ).
*****************Test Cell Variant*************************************************
    IF lv_index GT 1.
      LOOP AT .
          IF sy-tabix EQ lv_cur_row.
          Name zuweisen
            ASSIGN COMPONENT 'NAME' OF STRUCTURE .
          Zuweisen ob Blatt oder nicht
            lv_element->set_attribute( name = 'NAME' value = lv_value ).
            ASSIGN COMPONENT 'IS_LEAF' OF STRUCTURE set_attribute( name = attr_name value = lv_value ).
          ENDIF.
    ENDLOOP.
Now my problem is, that I need for every ROW of my table UI Element a different cell editor. I know how to change it for the column. But is not my issue. I want to have images (traffic lights red and green) in some rows. The other rows should have numbers. The coding works, so that I have all the data at the right place in my table, only the images are shown as a string, because the cells of these rows have the cell editor Text_View. I tried something with cell variants (with cl_wd_table_standard_cell), but it was not possible for me to get a cell variant "image" in these cells/rows were I need it.
I hope you understand my problem and now what to do here.
Thanks a lot in advance.
Best Regards,
Ingmar

Hi Experts, I have a problem with a dynamic Table UI Element in Web Dynpro ABAP. I have the following coding: METHOD set_col_row . TYPE-POOLS: icon. DATA: lv_node TYPE REF TO if_wd_context_node, lv_node_info TYPE REF TO if_wd_context_node_info, lv_element TYPE REF TO if_wd_context_element, lt_attributes TYPE wdr_context_attr_info_map, lv_table TYPE REF TO cl_wd_table, lv_table_column TYPE REF TO cl_wd_table_column, lv_text_view TYPE REF TO cl_wd_text_view, lv_image TYPE REF TO cl_wd_image, lv_text_edit TYPE REF TO cl_wd_text_edit, lv_header TYPE REF TO cl_wd_caption, attribute LIKE LINE OF lt_attributes, lv_index TYPE string, lv_cur_row TYPE i, path TYPE string, lv_value TYPE string, attr_name TYPE string, l_trc_point_id TYPE string, l_num_cols TYPE string, l_num_rows TYPE string, lv_text TYPE string, lv_index2 TYPE i, lr_ress_selections TYPE REF TO /its/di_2_cpr_ress_selections, lt_comp_tab TYPE cl_abap_structdescr=>component_table, ls_comp_tab LIKE LINE OF lt_comp_tab, lv_count TYPE i, lv_col_count TYPE i, lv_col_count_read TYPE i, lv_index_read TYPE i, lv_num_cols_minus_1 TYPE i, lv_bind_lv_value TYPE string, wd_standard_cell TYPE REF TO cl_wd_table_standard_cell, lv_data_count TYPE i, lv_data_count_str TYPE string, wd_table_column TYPE REF TO cl_wd_table_column, lv_column_id TYPE string. FIELD-SYMBOLS: LIKE LINE OF lt_attributes, TYPE ANY TABLE, TYPE ANY, TYPE ANY, TYPE ANY. * Instanz der Klasse /ITS/DI_2_CPR_RESS_SELECTIONS lr_ress_selections = /its/di_2_cpr_ress_selections=>factory( ). ASSIGN lr_ress_selections->gr_table->* TO . lt_comp_tab = lr_ress_selections->gt_comp_tab. ls_comp_tab-name = 'SUMME'. * APPEND ls_comp_tab TO lt_comp_tab. * ls_comp_tab-name = 'CELL_VARIANT'. APPEND ls_comp_tab TO lt_comp_tab. CLEAR ls_comp_tab. l_num_rows = num_rows + 1. CONDENSE l_num_rows. l_num_cols = num_columns + 1. CONDENSE l_num_cols. * UI-Element 'TABLE' lv_table ?= wd_this->m_view->get_element( 'TBL_TABLE' ). lv_table->remove_all_columns( ). * Kontext-Knoten 'TABLE' lv_node = wd_context->get_child_node( 'TABLE' ). lv_node_info = lv_node->get_node_info( ). lv_node_info->remove_dynamic_attributes( ). attribute-type_name = 'STRING'. lv_num_cols_minus_1 = num_columns - 1. * Für jede Spalte einmal tun DO lv_num_cols_minus_1 TIMES. lv_index = sy-index + 1. CONDENSE lv_index. lv_table_column = cl_wd_table_column=>new_table_column( ). lv_column_id = lv_table_column->id. * Spaltenüberschriften setzen IF lv_index EQ 1. "Beim ersten Durchlauf --> erste Spalte = "Ressourcen" lv_text = text-010. sy-index = 0. ELSE. "Danach für jede weitere Spalte eine Zeile aus der gt_comp_tab nehmen lv_index_read = lv_index - 1. READ TABLE lt_comp_tab INDEX lv_index_read INTO ls_comp_tab. lv_text = ls_comp_tab-name. lv_header = cl_wd_caption=>new_caption( text = lv_text ). lv_table_column->set_header( lv_header ). ENDIF. CONCATENATE 'TABLE.A' lv_index INTO path. lv_text_view = cl_wd_text_view=>new_text_view( bind_text = path ). lv_table_column->set_table_cell_editor( lv_text_view ). lv_table_column->bind_selected_cell_variant( 'TABLE.CELL_VARIANT' ). lv_table->add_column( lv_table_column ). wd_table_column ?= wd_this->m_view->get_element( lv_column_id ). ******************Test Cell Variant************************************************** IF lv_index GT 1. LOOP AT ASSIGNING . ASSIGN COMPONENT 'TYPE' OF STRUCTURE TO . ADD 1 TO lv_data_count. lv_data_count_str = lv_data_count. CONCATENATE 'A' lv_index lv_data_count_str INTO path. wd_standard_cell = cl_wd_table_standard_cell=>new_table_standard_cell( view = wd_this->m_view variant_key = 'FLDATE' ). IF = '01' OR = '04'. lv_image = cl_wd_image=>new_image( bind_source = path view = wd_this->m_view ). wd_standard_cell->set_editor( lv_image ). wd_standard_cell->set_cell_design( '01' ). ELSE. lv_text_view = cl_wd_text_view=>new_text_view( bind_text = path view = wd_this->m_view ). wd_standard_cell->set_editor( lv_text_view ). wd_standard_cell->set_cell_design( '02' ). ENDIF. wd_table_column->add_cell_variant( wd_standard_cell ). ENDLOOP. ENDIF. ************************************************************************************* CONCATENATE 'A' lv_index INTO attribute-name. lv_node_info->add_attribute( attribute ). ENDDO. DO num_rows TIMES." Für jede Zeile einmal tun lv_cur_row = sy-index. lv_element = lv_node->create_element( ). lv_node->bind_element( new_item = lv_element set_initial_elements = abap_false ). DO l_num_cols TIMES. ADD 1 TO lv_col_count. IF lv_count LT 1. LOOP AT ASSIGNING . IF sy-tabix EQ lv_cur_row. * Name zuweisen ASSIGN COMPONENT 'NAME' OF STRUCTURE TO . "NAME lv_value = . * Zuweisen ob Blatt oder nicht lv_element->set_attribute( name = 'NAME' value = lv_value ). ASSIGN COMPONENT 'IS_LEAF' OF STRUCTURE TO . "NAME lv_value = . lv_element->set_attribute( name = 'IS_LEAF' value = lv_value ). ENDIF. ENDLOOP. ENDIF. IF lv_count GT 0. lv_col_count_read = lv_col_count - 1. lv_index = sy-index. LOOP AT ASSIGNING . IF sy-tabix EQ lv_cur_row. CLEAR ls_comp_tab. READ TABLE lt_comp_tab INDEX lv_col_count_read INTO ls_comp_tab. ASSIGN COMPONENT ls_comp_tab-name OF STRUCTURE TO . lv_value = . CONDENSE lv_index. CONCATENATE 'A' lv_index INTO attr_name. lv_element->set_attribute( name = attr_name value = lv_value ). ENDIF. ENDLOOP. ENDIF. lv_count = lv_count + 1. ENDDO. CLEAR lv_col_count. CLEAR lv_count. ENDDO. ENDMETHOD. I definied my table in Layout Tab of the View and create here in thos method dynamicly my columns. lv_table_column = cl_wd_table_column=>new_table_column( ). . . lv_table->add_column( lv_table_column ). In I have my data that should be shown later in my table. So I create for each row in this fieldsymbol in a loop: lv_element = lv_node->create_element( ). lv_node->bind_element( new_item = lv_element set_initial_elements = abap_false ). Later I fill every cell in my table with a different value with this loop: LOOP AT ASSIGNING . IF sy-tabix EQ lv_cur_row. CLEAR ls_comp_tab. READ TABLE lt_comp_tab INDEX lv_col_count_read INTO ls_comp_tab. ASSIGN COMPONENT ls_comp_tab-name OF STRUCTURE TO . lv_value = . CONDENSE lv_index. CONCATENATE 'A' lv_index INTO attr_name. lv_element->set_attribute( name = attr_name value = lv_value ). ENDIF. ENDLOOP. Now my problem is, that I need for every ROW of my table UI Element a different cell editor. I know how to change it for the column. But is not my issue. I want to have images (traffic lights red and green) in some rows. The other rows should have numbers. The coding works, so that I have all the data at the right place in my table, only the images are shown as a string, because the cells of these rows have the cell editor Text_View. I tried something with cell variants (with cl_wd_table_standard_cell), but it was not possible for me to get a cell variant "image" in these cells/rows were I need it. I hope you understand my problem and now what to do here. Thanks a lot in advance. Best Regards, Ingmar

Error in Event Binding for Table UI element

Hi,
I had created a table UI element in my web dynpro component and it worked fine. After a few weeks, while I was making some other changes in the same module and did a syntax check on the component, I got this error "The event binding for element "TBL_ABC" contains errors". There is a "Correct errors" button given along with this error message, which removes the error. But I just wanted to know what is the reason for this error.
Regards,
Akshatha.

Hi,
Please check for the cardinality of the node which you are using to bind for the TABLE UI element.
I think the cardinality should be either 1:N or 0:N.
Give it a try.
Regards,
Lekha

(SUP for Blackberry) JCo unknown type error when using PT_ARQ_REQUEST* RFC

Dear community,
I am encountering a weird error when trying to execute the PT_ARQ_REQUEST_PREPARE RFC in a Leave Request scenario for BlackBerry with the SUP.
When creating the MBO from the RFC PT_ARQ_REQUEST_PREPARE and testing it with the parameters
im_command = create
im_modus = r
im_pernr = 00001000
im_wi_id = 000000000000 (initial value)
im_request_id = *emptyString* (initial value)
I get an "execution suceeded" everytime EXCEPT when I try to return the output structure ex_request! However, this is exactley the information needed to execute the following RFCs PT_ARQ_REQUEST_EXECUTE and PT_ARQ_REQUEST_CHECK. The error I get when executing is the following:
unknown JCO type
java.sql.SQLException: unknown JCO type
I checked for short dumps in the transaction ST22 and found an OBJECTS_OBJREF_NOT_ASSIGNED_NO (CX_SY_REF_IS_INITIAL) error that marks an error when retrieving the attributes (most likely from the ex_request structure). I looked at the structure and found out that it is a deep structure. Could that be the reason for the error? How can I fix it and get the correct output? Does anybody has experience with a similar problem?
Thank you for your help in advance!
Best regards,
Jenny
PS: some additional info about the error message:
unknown JCO type
unknown JCO type
java.sql.SQLException: unknown JCO type
com.sybase.vader.jca.sap.connector.cci.SapJcoResultSetMetaData.getColumnType(SapJcoResultSetMetaData.java:135)
com.sybase.uep.eis.RecordSetImpl.<init>(RecordSetImpl.java:69)
com.sybase.uep.tooling.eis.BaseEISOperation.getRecordSetFromResultSet(BaseEISOperation.java:980)
com.sybase.uep.tooling.eis.BaseEISOperation.execute(BaseEISOperation.java:259)
com.sybase.uep.tooling.eis.BaseEISOperation.execute(BaseEISOperation.java:154)
com.sybase.uep.tooling.eis.SapEISOperationImpl.execute(SapEISOperationImpl.java:401)
com.sybase.uep.tooling.ui.ModelsUtil.getEEISOperationMetaData(ModelsUtil.java:252)
com.sybase.uep.tooling.ui.ModelsUtil.refreshAttributes(ModelsUtil.java:892)
com.sybase.uep.tooling.ui.ModelsUtil$3.run(ModelsUtil.java:778)
com.sybase.uep.tooling.om.util.MobileObjectModelsUtil.execUpdate(MobileObjectModelsUtil.java:1027)
com.sybase.uep.tooling.ui.diagram.extension.commands.CommandUtils.runUpdate(CommandUtils.java:219)
com.sybase.uep.tooling.ui.ModelsUtil.refreshRead(ModelsUtil.java:742)
com.sybase.uep.tooling.ui.ModelsUtil$6$1.run(ModelsUtil.java:1046)
org.eclipse.gmf.runtime.diagram.ui.properties.sections.AbstractModelerPropertySection$3.doExecuteWithResult(AbstractModelerPropertySection.java:584)
org.eclipse.gmf.runtime.emf.commands.core.command.AbstractTransactionalCommand.doExecute(AbstractTransactionalCommand.java:247)
org.eclipse.emf.workspace.AbstractEMFOperation.execute(AbstractEMFOperation.java:150)
org.eclipse.gmf.runtime.common.core.command.CompositeCommand.doExecuteWithResult(CompositeCommand.java:403)
org.eclipse.gmf.runtime.common.core.command.AbstractCommand.execute(AbstractCommand.java:135)
org.eclipse.core.commands.operations.DefaultOperationHistory.execute(DefaultOperationHistory.java:511)
org.eclipse.gmf.runtime.diagram.ui.properties.sections.AbstractModelerPropertySection.executeAsCompositeCommand(AbstractModelerPropertySection.java:315)
com.sybase.uep.tooling.common.ui.property.view.UEPPropertySheetSection.executeAsCompositeCommand(UEPPropertySheetSection.java:406)
com.sybase.uep.tooling.common.ui.property.view.UEPPropertySheetSection.runAsCommands(UEPPropertySheetSection.java:389)
com.sybase.uep.tooling.ui.properties.sheets.mbo.MBOAttributesBoundMappingPropertySection.runAsCommands(MBOAttributesBoundMappingPropertySection.java:583)
com.sybase.uep.tooling.ui.tableviewer.common.editingsupports.PropertyViewCommandDelegate.runInCommand(PropertyViewCommandDelegate.java:48)
com.sybase.uep.tooling.ui.ModelsUtil$6.run(ModelsUtil.java:1039)
org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
Edited by: Jenny Bachmann on Feb 8, 2011 6:29 AM

Hi Jenny,
I can't remember what the issue exactly is but I think it's related to one of the data types used in the returned structure.
In any case it's probably a good idea to create your own RFC enabled function module to call the 3 standard function modules instead of calling them one after the other. This way you will avoid unnecessary network communication and you have more control on the data that is exchanged.
Regards,
Pierre

Error while filling setup table for Quality Mangement D/Sources

HI Experts,
Iam trying to fill the QM setup tables.
Steps iam following are
1.T-code OLIQBW
2.Selecting Event QV, QE and gave selection parameters and name for Run.
3. Execute
4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
   Exception CX_SY_DYN_CALL_PARAM_NOT_FOUND
   Date and Time          27.08.2009 11:21:01
Function parameter "I_ADDITIONAL_DATA" is unknown.

Hi Mansi,
Runtime Errors         CALL_FUNCTION_PARM_UNKNOWN
Exceptn                CX_SY_DYN_CALL_PARAM_NOT_FOUND
Date and Time          27.08.2009 11:56:20
ShrtText
Function parameter "I_ADDITIONAL_DATA" is unknown.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLQMER" had to be terminated because one of the
     statements could not be executed.
This is probably due to an error in the ABAP program.
Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
     with the parameter "I_ADDITIONAL_DATA".
     This parameter is not defined.
Error analysis
An exception occurred. This exception is dealt with in more detail below
     . The exception, which is assigned to the class
      'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
     caught nor passed along using a RAISING clause, in the procedure
      "QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
      to occur, the running program was terminated.
     The reason for the exception is:
     The reason for the exception is:
     Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
     with the parameter "I_ADDITIONAL_DATA".
     This parameter is not defined.
Missing RAISING Clause in Interface
     Program                                 SAPLQMER
     Include                                 LQMER$01
     Row                                     5
     Module type                             (FUNCTION)
     Module Name                             QMER_EXTRACTION_RD_RESULTS
Trigger Location of Exception
     Program                                 SAPLQMER
     Include                                 LQMERU01
     Row                                     488
     Module type                             (FUNCTION)
     Module Name                             QMER_EXTRACTION_RD_RESULTS

Short dump error while filling setup tables for 2LIS_06_INV

Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
    SQL error in the database when accessing a table.
plz can anyone help me out...

Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
    SQL error in the database when accessing a table.
Information on where terminated
    Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
    The main program was "RMCENEUR ".
    In the source code you have the termination point in line 827
    of the (Include) program "LMRMBWF01".
    The program "SAPLMRMBW" was started as a background job.
    Job Name....... "RMCENEUR"
    Job Number..... 10524100
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLMRMBW "; its source code begins in line
    806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING    t_mcrbkey_bv    TYPE mcrbkey_t
807                                  t_mcrbkey_nbv   TYPE mcrbkey_t
808                                  t_ekbe_acc      TYPE t_ekbe
809                         CHANGING t_mcrbco        TYPE mcrbco_t.
810
811   TYPES: BEGIN OF s_target.
812   TYPES: table_left LIKE rbco.
813   TYPES: table_right TYPE rbex.
814   TYPES: END OF s_target.
815   TYPES: t_target TYPE TABLE OF s_target.
816
817
818   DATA: t_rbco_nbv TYPE t_target,
819         t_rbco_bv   TYPE t_target,
820         s_rbco      TYPE s_target,
821         s_ekbe      LIKE ekbe,
822         s_mcrbco    TYPE mcrbco,
823         l_index     LIKE sy-tabix.
824
   825 * Data source: invoice item non-background
826   IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>>     SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828        ON   ( rmandt = imandt AND
829               rbelnr = ibelnr AND
830               rbuzei = ibuzei AND
831               rcobl_nr = icobl_nr )
832        INTO TABLE t_rbco_nbv
833        FOR ALL ENTRIES IN t_mcrbkey_nbv
834        WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835              r~belnr = t_mcrbkey_nbv-belnr.
836   ENDIF.
837 * Data source: invoice item background
838   IF NOT t_mcrbkey_bv[] IS INITIAL.
839     SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840        ON   ( rmandt = imandt AND
841               rbelnr = ibelnr AND
842               rbuzei = ibuzei AND
843               rcobl_nr = icobl_nr )
844        INTO TABLE t_rbco_bv
845        FOR ALL ENTRIES IN t_mcrbkey_bv
846        WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance

Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5

Hi All,
I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
FROM (SELECT CASE Isnumeric(
accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
WHEN 1 THEN Cast(
fact_highweedsandgrassdetails.vendorinvoiceamount AS
VARCHAR(
10))
END AS
Total_Dollar_Amount,
fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township AS
CaseTownship,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag AS
CaseReferredToLegalFlag,
fact_casedetails.macinitiatedflag AS
CaseMACInitiatedFlag,
fact_casedetails.conversionstatusdesc AS
CaseConversionStatusDesc,
fact_casedetails.assignedstaff AS
CaseAssignedStaff,
fact_casedetails.completedstaff AS
CaseCompletedStaff,
fact_casedetails.closedbystaff AS
CaseClosedByStaff,
fact_casedetails.initiator AS
CaseInitiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
DECIMAL(6, 2))
AS
DaysOpen,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursOpenToMow,
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursAssignedToMow,
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END AS
NumberComplete,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate IS
NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate
<=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHoursOLD,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHours,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
Assigned_Department_Staff,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
'HWG', 0)
, '-', 0)) AS compliancejoin,
fact_highweedsandgrassdetails.maccomments AS Expr1,
dbo.dim_highweedscensustracts.b1_census_tract
FROM dbo.fact_highweedsandgrassdetails
INNER JOIN dbo.fact_casedetails
ON fact_highweedsandgrassdetails.casenumber =
fact_casedetails.casenumber
INNER JOIN dbo.dim_highweedscensustracts
ON fact_highweedsandgrassdetails.casenumber =
dbo.dim_highweedscensustracts.casenumber
GROUP BY fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag,
fact_casedetails.macinitiatedflag,
fact_casedetails.conversionstatusdesc,
fact_casedetails.assignedstaff,
fact_casedetails.completedstaff,
fact_casedetails.closedbystaff,
fact_casedetails.initiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
fact_highweedsandgrassdetails.vendormoweddatetime,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate
IS NOT NULL
AND
fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE
fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)),
Cast(Datediff(ss,
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN
( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(18, 2)) * 60,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]'),
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(
Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
, '-', 0)),
fact_highweedsandgrassdetails.maccomments,
dbo.dim_highweedscensustracts.b1_census_tract) AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
ASC
SV

I just counted the columns from the top:
1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
might be staring on the wrong column.
Erland Sommarskog, SQL Server MVP, [email protected]

Unknown type TABLE for element Error

Similar Messages

Maybe you are looking for