Unloading multiple movies at once

I'm trying to remove multiple dynamically created movies at
one time. I'd like all of these clips to unload when entering a new
frame in the timeline, but the only way i know how to do this is to
list them all individually. Is there a way to do this at once like
a wildcard or something?
Any help would be greatly appreciated.

yeah or if they're all loaded into a parent clip, use the
clips access operator to loop through and ace them, like ...

Similar Messages

From my music how do i move multiple songs at once to a playlist

From( My Music) how do I move multiple songs at once to a playlist.
Thanks

Your issue has nothing to do with Apple networking. You may get better results in getting a solution if your post your issue to the iTunes area of the Apple Support Communities.

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

Moving multiple messages at once...HELP PLEASE!

I can't move multiple messages at once in Mail. Why not? When's it going to get fixed?

I can. So it's just your installation. If I were you, the first thing I would try to do is, if you have multiple user accounts on that same computer, see if it is afflicting the other user accounts as well.
If so, I would try reapplying 10.6.3 COMBO update, after running disk utility verify hard disk (and repair if necessary) and running disk utility repair disk permissions.
If not, I would try rebuilding all the mailbox folders. May want to run the two disk utility routines anyways before rebuilding.

Unload parent movie after onloadInit of child movie

Hi,
I am loading external swf's into a main load.swf, using a Moviecliploader object. What I basically want to do is that, after an external movie, say home.swf, loads another external swf, say about.swf, home.swf should be unloaded.
home.swf is loading about.swf into the _root.mc_holder, which is placed inside load.swf. I want all external files to be placed within this holder. Now this is working with some files, but not with others. My standard code within all files is this:
//code within home.swf to load about.swf
var loader:MovieClipLoader = new MovieClipLoader();
var ldrlistener = new Object();
loader.addListener(ldrlistener);
ldrlistener.onLoadStart = function(_mc:MovieClip) {
    trace("about loading started");
ldrlistener.onLoadProgress = function(_mc:MovieClip, loaded:Number, total:Number) {
    var prcnt:Number = Math.floor((loaded/total)*100);
    if (prcnt == 10) {
        trace("loading:10");
        ldgraphic.gotoAndStop("ten");
    if (prcnt == 15) {
        trace("loading:15");
        ldgraphic.gotoAndStop("fifteen");
    if (prcnt == 20) {
        trace("loading:20");
        ldgraphic.gotoAndStop("twenty");
    if (prcnt == 25) {
        trace("loading:25");
        ldgraphic.gotoAndStop("twentyfive");
    if (prcnt == 30) {
        trace("loading:30");
        ldgraphic.gotoAndStop("thirty");
    if (prcnt == 40) {
        trace("loading:40");
        ldgraphic.gotoAndStop("forty");
    if (prcnt == 50) {
        trace("loading:50");
        ldgraphic.gotoAndStop("fifty");
    if (prcnt == 55) {
        trace("loading:55");
        ldgraphic.gotoAndStop("fiftyfive");
    if (prcnt == 60) {
        trace("loading:60");
        ldgraphic.gotoAndStop("sixty");
    if (prcnt == 70) {
        trace("loading:70");
        ldgraphic.gotoAndStop("seventy");
    if (prcnt == 80) {
        trace("loading:80");
        ldgraphic.gotoAndStop("eighty");
    if (prcnt == 100) {
        trace("loading:100");
        ldgraphic.gotoAndStop("hundred");
ldrlistener.onLoadInit = function(_mc:MovieClip) {
    ldgraphic._alpha = 0;
    trace("load completed");
loader.loadClip("about.swf",_root.mc_holder);
this.unloadMovie();                    //unloads home.swf, which was loaded from load.swf
Now the problem is, it is successfully unloading the movie, but after a while it stops doing this. Is there something wrong with the code?? Any help will be greatly appreciated.

Hi Kglad,
I seem to have managed to get it to work so far. But once again, I can't be sure as it seems to stop working on its own. Also, if I do not insert the this.unloadMovie, the next movie does not load in some cases. I think I need to reconsider my strategy, but for now this will have to do. Thanks for the response

Delete multiple emails at once on iPhone 5s - any fix?

I have alot of emails which "appeared" in my inbox. Not sure if because it's sinced to my home email account which also has alot of emails in the inbox of the server. But my main question is how to delete multiple emails at once. I've read "work arounds" on using the select, move button, unselect and then the trash button. Seems to do what it is supposed to do, however when I go back to my mailboxes, the messages didn't get moved to the trash and are still showing up where they originally were. Any ideas on a real fix out there?
Thanks,
Olmbre

No, there is no way to delete all emails in one step. Of course, you can select multiple emails individually and delete them as a group.

How to delete multiple email at once?

Hi,
I'm on the move a lot and go between my PC and my iPhone but sometimes I get hundreds of emails on my iPhone that I have already viewed on my PC.
Is there a way to do a "Select all" to delete multiple email at once instead of using the edit feature?

Is there a way to do a "Select all" to delete multiple email at once instead of using the edit feature?
No. You'll have to click edit then put a check next to each email you want to delete, then hit delete. Once in trash, you can delete all.

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

How do I delete multiple items at once instead of one at a time?

How do I delete multiple items at once instead of one at a time? I have several duplicate items in my library and would like to delete the duplicates. Thanks!

You can select multiple items using shift to select a range and control to add or remove items from it.
Regarding duplciates, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group of identical tracks to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. This can happen, for example, if you start iTunes with a disconnected external drive, then connect it, reimport from your media folder, then restart iTunes.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background. Please take note of the warning to backup your library before deduping, whether you do so by hand or using my script, in case something goes wrong.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

How can I delete multiple photos at once from the official Photos app?

Dear fellow Apple users,
I have many pictures on my Camera Roll in Apple's Photos app. What's the quickest way to delete multiple photos at once?
Thus far, I know how to delete photos one by one, but that's time-consuming.
Thank you.

No not box with arrow, that is share button. Edit is where it shows in the pic I posted

Is there a way to format multiple images at once? Change colour mode or resolution?

Is there a way to format multiple images at once? Change colour mode or resolution?

It's very easy to make an action.
Go to window > actions
In the actions panel, simply click the 'create a new action' button, it starts recording as soon as you've created it (when you've given it a name).
Now you can apply the changes you want to make to the images on the file you have opened.
After you've done all you need to do. You click the 'stop' button. The action is now ready to use. And you can apply the changes you made on all the other files.
Then you can continue how gener7 explained.
I usually include a save and close command, so that the whole batch doesn't end up opened after running the script.
But if you do that you have to create a new file, and save it to your computer before you start recording the action, otherwise the save command will be replaced by each file. And you'll end up with one edited file in the end. At least for as far as I know!

ICloud keeps duplicating my contacts, any of which I need to delete anyways. Is there a way to delete multiple contacts at once? I have been deleting them one at a time, but they keep reappearing.

ICloud keeps duplicating my contacts, any of which I need to delete anyways. Is there a way to delete multiple contacts at once? I have been deleting them one at a time, but they keep reappearing.

I have exactly the same problem! I have Outlook 2010 and it does the same thing with my contacts, and calender enteries!! Really frustrating

Insert data into multiple entities at once using a view object

Hi,
I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
Is this possible? And how (if it is)?

Hi,
I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
Is this possible? And how (if it is)? Peter:
This is definitely supported and tested. Please send us the exception stack trace. You must running into other problems. A few things to note:
A) You have to mark the entities as both updateable (not read-only) and not reference-only.
B) If you're not seeing an exception stack, turn on diagnostic. Here is how:
To turn on diagnostic, go to the IDE,
1. Select the project.
2. Do right mouse click and select "Project Settings..."
3. On the Settings dialog, select Configurations/Runner.
4. In the righthand side pane, you should see a textbox for "Java
Options". Please add the following JVM switch:
-Djbo.debugoutput=console
Then, rerun. The run command should include
-Djbo.debugoutput=console as in
"D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
You should now see a lot more output on the IDE's message window. Here you should see the exception stack trace.
If you invoking your app directly from command prompt, just add "-Djbo.debugoutput=console" after your "java.exe".
Thanks.
Sung

How do I apply a preset to multiple images at once?

I'm almost embarassed to ask this, because it seems so simple. But I'm new to LR and need some help.
I want to apply a preset (exmample, a preset that resembles film) to multiple images at once. (similar to batch editing in Photoshop) but I want want the white balance etc to necessarily be the same, obviously. Please help!

Select all of your thumbnails in the develop module film strip or in the library prior to going into develop. Then turn on Auto-Sync. Any adjustment you make to your first image will be repeated on all of the selected images. Or just perfect your first image and choose sync. You will see a pop-up dialog and you can choose exactly which develop settings you wish to sync e.g. white balance only or white balance and other settings.
To be clear Auto-sync will apply all develop settings on the fly to all selected images.
Sync will apply the settings from the first selected image to all of the subsequently selected images unless you choose exceptions. For example you may wish to apply exposure, contrast, highlights and shadows from your perfected image but not the crop settings.
Don't forget to turn off Auto-Sync when you have finished otherwise it will affect future editing.
P.S. There is no such thing as an embarrassing question. The beginners forum is designed entirely for that purpose.

HitTest for multiple Movie Clip at the same time

I have a movie it is a triangle.I duplicate it and I want to hitTest on the first triangle movie clip and I added 3 different line movie clips on the 3 side of triangle.I tried to write a code something like that.
if(firstTriangle_mc.hitTestObject(line1_mc,line2_mc,line_3mc){
trace("Ok");
but I've got error.I think it is not allowed hitTestObject for multiple Movie Clips.So is there anyone have an opinion about it?What should I do?

Here is another test for multiple movie clips for hitTestPoint but only the first work the others don't
uc_mc.addEventListener(Event.ENTER_FRAME,hitle);
function hitle(e:Event) {
if (uc_mc.hitTestPoint(cub1,cub1Y,true)&&(cub2,cub2Y,true)&&(cub3,cub3Y,true)) {
uc_mc.alpha=0.5;
}else{
uc_mc.alpha=1;
The code above doesn't work.What should I do?

Unloading multiple movies at once

Similar Messages

Maybe you are looking for