Unpublish a query
Hello,
I know i can make a query available to other users when publishing it to roles. I wonder if it's possible to unpublish it ...
thanks
best regards,
Armelle Rolland
Hi Armelle,
Yes, it is possible. please refer to the following recent post:
How to unassign query from a role
Hope it helps.
Thanks,
Abhishek.
Similar Messages
-
BI: SQL Query to get unpublished timesheet line status
For Project Server 2010
I am trying to write a query that will pull data similiar to the Timesheet History where it includes published and unpublished lines. This is the history over all approvers/assignment owners.
I have been able to create most of this data, but NOT the published/unpublished specifically. I want to create exactly what you would see in the PWA timesheet approval history (Mock-up seen below).
This is a critical issue for me, so any help would be greatly appreciated!!
NashParrotHi NashParrot,
I might be wrong but the Published/Unpublished information is not part of the Reporting database. All the data found in the reporting database is the published one. So your solutions would be: PSI and/or the (not supported) query of the draft/published databases
Hope this helps
Paul -
How to know that a form is running in query-only mode
I have a form that can run in query-only mode or non-query-only mode depending on the current user who logs in, and I want to change its apprearance dynamically when it's in different modes (for example, enable or disable buttons). Is there a built-in or system variable from which I know that the form is running in query-only mode or not?
Thanks,
ShuThe global variable solution is what we are using now. I thought there are some unpublished built-in or system variables. In my application, there is a public "menu" form from where hundreds of forms are CALLed with some in query-only mode and some in non-query-only mode depending on the current user role. :PARAMETER.QUERY_ONLY will always be 'NO' because the "menu" form is started in non-query-only mode. But it's good to know about it.
Thank you very much for your replies,
Shu -
Union_all query returns wrong results
I have 6 individual queries that combine together using "union_all". If I run it, it returns 6084 records, see example 1.
Example 1:
sql1
union_all
sql2
unionl_all
sql3
sql6;
if I do it this way, example2, I get only 3821 records. Is there a bug in Oracle 11g? I select everything from 6084 records, I should get them all, correct?
Example 2:
select * from
sql1
union_all
sql2
unionl_all
sql3
sql6
note that I use "union_all" because the computer does not take it without the underscore.user557594 wrote:
Your queries do not deal with thousand of rows. My queries worked ok before the upgrade to 11g. I just want to know if there is a bug related to union all in 11g.If you believe that you are encountering a bug, you really should be posting this over on Metalink (My Oracle Support). When you do, you'll want to specify at a minimum the 4 digit Oracle version you are using (11g could mean either of two major releases and a few different patchsets).
I'm sure if you search My Oracle Support, you'll find at least one bug in whatever version of 11g you're using that occurs when UNION ALL is used (though I'll wager that you need two or three other conditions to be true as well). If you open a ticket, however, Oracle Support can determine whether you are actually encountering an error and/or whether you've encountered any of the published bugs, an unpublished bug, or a new bug. Once you know that, Oracle Support may or may not have a patch for you.
Unfortunately, if you can't post a test case that would allow us to reproduce the problem locally, it's going to be hard for us to provide much assistance. Of course, Oracle Support will also need a reproducible test case, but they can probably help you work through the process of putting one together complete with sample data and a query plan.
Justin -
MDS 2012 Unpublished business rules exist
Hi,
I'm running SQL Server 2012 SP 1 CU 1 (11.0.5532). My MDS database version is 11.2.0.1.
Whenever I click "Apply Rules" in the web frontend, I get a popup saying:
MDSERR400038: Unpublished business rules exist. Apply the business rules before running Business Rules or Validation again
We've also had some problems with the sql error log, getting a lot of messages like:
The activated proc '[mdm].[udpValidationQueueActivate]' running on queue 'MDS.mdm.microsoft/mdm/queue/validation' output the following: 'MDSERR400038|Unpublished business rules exist. Apply the business rules before running Business Rules or Validation
again.'
When I query the view [mdm].[viw_SYSTEM_SCHEMA_BUSINESSRULES] all business rules has status "Active".Don't know if this will help
https://social.msdn.microsoft.com/Forums/en-US/8b38e0ec-ac85-4c4d-86af-0550ddac407b/mdserr400038unpublished-business-rules-exist-apply-the-business-rules-before-running-business
Andy Tauber
Data Architect
The Vancouver Clinic
Website | LinkedIn
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Error while running a query-Input for variable 'Posting Period is invalid
Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System AdministrationOK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
-> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
-> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
-> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM -
Logical database in adhoc query
Hello All,
Can anyone tell me what is the logical database in adhoc query?Hi
When you create a query , you have to select an infoset. Infoset can be considered as a source from which data is populated in the Query Fields.
Infosets are created from Transaction SQ02.
There can be four methods through which an Infoset can become a source of data:
1. Table join ( By joining two or more tables from Data dictionary)
example: Joining tables PA0001 and PA0006 on Pernr to get a one resultant dataset
2. Direct read of Basis Table ( Like PA0001 as a source for data in Infoset )
3. Logical Database ( A Pre-written Program by SAP that extract data from clusters, tables taking care of authorizations and validity periods)
Example : Logical database PNP, PNPCE (Concurrent Employement),PCH ( LDB for Personnel Development Data)
Custom Logical DBs can be created in T_Code SE-36.
4. Data Retrieval by a Program ( Custom code written by ABAP developers which will collect and process data) . This program has a corresponding Structure in data dictionary and the fields of this structure will be used in query)
Reward Points, if helpful.
Regards
Waseem Imran -
Query help on Goods Receipt Query with AP Invoice
Looking for a little help on a query. I would like to list all the goods receipts for a given date range and then display the AP Invoice information (if its been copied to an AP Invoice). I think my problem is in my where clause, I plagerized an SAP query to show GR and AP from a PO as a start. SBO 2005 SP01. Any help would be great appreciated. Thanks
SELECT distinct 'GR',
D0.DocStatus,
D0.DocNum ,
D0.DocDate,
D0.DocDueDate,
D0.DocTotal,
'AP',
I0.DocStatus,
I0.DocNum ,
I0.DocDate,
I0.DocDueDate,
I0.DocTotal,
I0.PaidToDate
FROM
((OPDN D0 inner Join PDN1 D1 on D0.DocEntry = D1.DocEntry)
full outer join
(OPCH I0 inner join PCH1 I1 on I0.DocEntry = I1.DocEntry)
on (I1.BaseType=20 AND D1.DocEntry = I1.BaseEntry AND D1.LineNum=I1.BaseLine))
WHERE
(D1.BaseType=22 AND D1.DocDate>='[%0]' AND D1.DocDate<='[%1]')
OR (I1.BaseType=20 AND I1.BaseEntry IN
(SELECT Distinct DocEntry
FROM PDN1 WHERE BaseType=22 AND DocDate>='[%0]' AND DocDate<='[%1]'))Hi Dalen ,
I believe it is because of the condition
(D1.BaseType=22 AND D1.DocDate>='%0' AND D1.DocDate<='%1')
OR (I1.BaseType=20 AND I1.BaseEntry IN
(SELECT Distinct DocEntry FROM PDN1 WHERE PDN1.BaseType=22 AND DocDate>='%0' AND DocDate<='%1'))
Try changing
D1.BaseType=22 OR D1.DocDate>='%0' AND D1.DocDate<='%1
PDN1.BaseType=22 OR DocDate>='%0' AND DocDate<='%1'))
Lets see what would be the result . Lets have some fun with troubleshooting
See what would be the difference in the result .
Thank you
Bishal -
Can you check for data in one table or another but not both in one query?
I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID Name
123 John Doe
124 Jane Donaldson
125 Harold Douglas
MARKETER_ACCOUNT
Key AccountID Marketer StartDate EndDate
1001 123 10526 8/3/2008 9/27/2009
1017 123 10987 9/28/2009 12/31/4712 (high date ~ which means currently with this marketer)
1023 124 10541 12/03/2010 12/31/4712
ARCHIVE
Key AccountID Marketer StartDate EndDate
1015 124 10526 8/3/2008 12/02/2010
1033 125 10987 01/01/2011 01/31/2012
So my query needs to return the following:
123 John Doe 10526 8/3/2008 9/27/2009
124 Jane Donaldson 10541 12/03/2010 12/31/4712 (this is the later of the two records for this account between archive and marketer_account tables)
125 Harold Douglas 10987 01/01/2011 01/31/2012 (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
select AccountID
from
ACCOUNT A,
MARKETER_ACCOUNT M,
ARCHIVE R
where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
where M2.AccountID = A.AccountID),
(select max(R.EndDate) from Archive R2
where R2.AccountID = A.AccountID)
and upper(A.Name) like parameter || '%'
<can you do a NVL like this? probably not... I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
, max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
, max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
, row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
, a.name
, b.MktKey
, b.FromDt
, b.ToDate
from account a
join filtered_basedata b
on (a.id = b.AccountId)
ID NAME MKTKEY FROMDT TODATE
123 John Doe 10987 28.09.2009 31.12.4712
124 Jane Donaldson 10541 03.12.2010 31.12.4712
125 Harold Douglas 10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin -
Query help : Query to get values SYSDATE-1 18:00 hrs to SYSDATE 08:00 hrs
Hi Team
I want the SQl query to get the data for the following comparison : -
Order Created is a Date Column , and i want to find out all the values from (SYSDATE-1) 18:00 hours to SYSDATE 08:00 hours
i.e.
(SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 08:00:00.
RegardsHi, Rohit,
942281 wrote:
If i want the data in the below way i.e.
from (SYSDATE-1) 18:00 hours to SYSDATE 17:59 hours ---> (SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 07:59:00.If you want to include rows from exactly 18:00:00 yesterday (but no earlier), and exclude rows from exatly 08:00:00 today (or later), then use:
WHERE ord_dtl.submit_dt >= TRUNC (SYSDATE) - (6 / 24)
AND ord_dtl.submit_dt < TRUNC (SYSDATE) + (8 / 24)
So can i use the below format : -
ord_dtl.submit_dt BETWEEN trunc(sysdate)-(6/24) and trunc(sysdate)+(7.59/24) . Please suggest . .59 hours is .59 * 60 * 60 = 2124 seconds (or .59 * 60 = 35.4 minutes), so the last time included in the range above is 07:35:24, not 07:59:59.
If you really, really want to use BETWEEN (which includes both end points), then you could do it with date arithmentic:
WHERE ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - (6 / 24)
AND TRUNC (SYSDATE) + (8 / 24)
- (1 / (24 * 60 * 60))but it would be simpler and less error prone to use INTERVALs, as Karthick suggested earlier:
WHERE ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - INTERVAL '6' HOUR
AND TRUNC (SYSDATE) + INTERVAL '8' HOUR
- INTERVAL '1' SECONDEdited by: Frank Kulash on Apr 17, 2013 9:36 AM
Edited by: Frank Kulash on Apr 17, 2013 11:56 AM
Changed "- (8 /24)" to "+ (8 /24)" in first code fragment (after Blushadown, below) -
Query help, subtract two query parts
Hi,
I am beginner of PL/SQL and have a problem I couldn’t solve:
Table (op_list):
Item - Amount - Status
Item1 - 10 - in
Item2 - 12 - in
Item3 - 7 - in
Item1 - 2 - out
Item2 - 3 - out
Item1 - 1 - dmg
Item3 - 3 - out
Item1 - 2 - out
Item2 - 5 - out
Item2 - 2 - in
Item3 - 1 - exp
Would like to get result of query (subtract amount of 'out/dmg/exp' from 'in' ):
Item - Amount left
Item1 - 5
Item2 - 6
Item3 - 3
I wrote code that returns sum of all incoming items and sum all out/dmg/exp items, but couldn’t solve how to subtract one part of querry from another. Or maybe there is a better way. Also worried what happens if there is no 'out/dmg/exp' only 'in'
select item.name, sum(op_list.item_amount)
from op_list
inner join item
on op_list.item = item.item_id
where op_list.status = 'in'
group by item.name
union
select item.name, sum(op_list.item_amount)
from op_list
inner join item
on op_list.item = item.item_id
where op_list.status = 'out'
or op_list.status = 'dmg'
or op_list.status = 'exp'
group by item.name
Return:
Item1 - 10 [10 in]
Item1 - 5 [2+1+2]
Item2 - 14 [12+2]
Item3 - 7
Item3 - 4 [3+1]
Thanks in advanceHi,
We can also use simple inline views to get what we need.
select a.item,a.amount-b.amount Balance from
(select item,sum(amount) Amount from op_list
where status = 'in'
group by item) a,
(select item,sum(amount) Amount from op_list
where status in ('out','dmg','exp')
group by item) b
where
a.item=b.item
order by item;
ITEM BALANCE
Item1 5
Item2 6
Item3 3Regards,
Prazy -
Query help: query to return column that represents multiple rows
I have a table with a name and location column. The same name can occur multiple times with any arbitrary location, i.e. duplicates are allowed.
I need a query to find all names that occur in both of two separate locations.
For example,
bob usa
bob mexico
dot mexico
dot europe
hal usa
hal europe
sal usa
sal mexico
The query in question, if given the locations usa and mexico, would return bob and sal.
Thanks for any help or advice,
-=beekyHow about this?
SELECT NAME
FROM <LOCATIONS_TABLE>
WHERE LOCATION IN ('usa','mexico')
GROUP BY NAME
HAVING COUNT(DISTINCT LOCATION) >= 2Results:
SQL> WITH person_locations AS
2 (
3 SELECT 'bob' AS NAME, 'USA' AS LOCATION FROM DUAL UNION ALL
4 SELECT 'bob' AS NAME, 'Mexico' AS LOCATION FROM DUAL UNION ALL
5 SELECT 'dot' AS NAME, 'Mexico' AS LOCATION FROM DUAL UNION ALL
6 SELECT 'dot' AS NAME, 'Europe' AS LOCATION FROM DUAL UNION ALL
7 SELECT 'hal' AS NAME, 'USA' AS LOCATION FROM DUAL UNION ALL
8 SELECT 'hal' AS NAME, 'Europe' AS LOCATION FROM DUAL UNION ALL
9 SELECT 'sal' AS NAME, 'USA' AS LOCATION FROM DUAL UNION ALL
10 SELECT 'sal' AS NAME, 'Mexico' AS LOCATION FROM DUAL
11 )
12 SELECT NAME
13 FROM person_locations
14 WHERE LOCATION IN ('USA','Mexico')
15 GROUP BY NAME
16 HAVING COUNT(DISTINCT LOCATION) >= 2
17 /
NAM
bob
salHTH!
Edited by: Centinul on Oct 15, 2009 2:25 PM
Added sample results. -
QUERY HELP!!! trying to create a query
i'm creating a summary report
i have a table with sale dates
for example i have a table tab_1 and column saleDate as
saleDat
1923
1936
1945
2003
2005
saleDate contains years and there are some missing years where no sale
was made
My report has to display years starting from earliest year
so i have to create a query that starts with 1923
but the problem is that I have to have years that are not in table.
for example i have to display years 1924 which is not in table
so the part of report has to look like
1923 blah blah summary.........
1924 "
1925
1926
2005
2006
upto current year (2006 may not be in the table, but i have to display)
i just need to know the query that can query all the years starting from
the ealiest saleDate to current year
thanks in advancePlease write the query in the following form:
SELECT a.year, --- place other columns from your table.
FROM (SELECT (:start_num + rownum) year
FROM all_tab_columns
WHERE :start_num + rownum <= :end_num) a,
tab_1 b
WHERE a.year = b.saleDat(+);
Note:
1) if your start year and end year are 1923 and 2006. Then input as below:
:start_num = 1922
:end_num = 2006
2) Since for some of the years (1924 etc) may not be there in your so you may need to use NVL to print proper indicators.
3) If you have more than one record in tab_1 for a particular year then group them based year and then use it.
Hope this helps.
- Saumen. -
Hi
I have a query / recordset that would be looking at 12000 rows in a database and 10 different variables and potential filters chosen by end users.
Should I put 10 wild card / url Where statements in my recordset query or should I put IF statements in my query.
ie.
If URL colname then ",and BetType= "xzz"" .
Is that the most efficient way to run my queries.
I will be running about 10 recordsets on my page all looking at these url variables so it will be a busy page.
If that is the answer can someone please tell me how to insert the if statement - i've tried allsorts but it wont work.
$colname_Recordset4 = "%";
if (isset($_GET['colname'])) {
$colname_Recordset4 = $_GET['colname'];
mysql_select_db($database_racing_analysis, $racing_analysis);
$query_Recordset4 = sprintf("SELECT BetType, sum(if(season='2006-2007', Bet, 0)) AS '2006-2007', sum(if(season='2007-2008', Bet, 0)) AS '2007-2008', sum(if(season='2008-2009', Bet, 0)) AS '2008-2009' FROM dataextract WHERE BetType Like %s and TrackID = 1 and Distance = 1000 and Class = 1 GROUP BY BetType", GetSQLValueString($colname_Recordset4, "text"));
$Recordset4 = mysql_query($query_Recordset4, $racing_analysis) or die(mysql_error());
$row_Recordset4 = mysql_fetch_assoc($Recordset4);
$totalRows_Recordset4 = mysql_num_rows($Recordset4);
hope someone can help.
SimonThat part of the query cross tabs my data into three columns - not intended to confuse the issue. I'd have the same problem with a basic query.
So Here is a very basic version:
I want an IF statement to go around: "WHERE Distance = 1000" and "AND Class = 1"
That I believe will reduce the effort on the MYSQL Server as it wouldn't be running a bunch of wild card queries and would only run if there is a URL paramter delivered.??
I just don't get how to put the IF statements in PHP.
thanks
$maxRows_Recordset3 = 5;
$pageNum_Recordset3 = 0;
if (isset($_GET['pageNum_Recordset3'])) {
$pageNum_Recordset3 = $_GET['pageNum_Recordset3'];
$startRow_Recordset3 = $pageNum_Recordset3 * $maxRows_Recordset3;
mysql_select_db($database_racing_analysis, $racing_analysis);
$query_Recordset3 = "SELECT * FROM dataextract WHERE Distance = 1000 AND Class = 1";
$query_limit_Recordset3 = sprintf("%s LIMIT %d, %d", $query_Recordset3, $startRow_Recordset3, $maxRows_Recordset3);
$Recordset3 = mysql_query($query_limit_Recordset3, $racing_analysis) or die(mysql_error());
$row_Recordset3 = mysql_fetch_assoc($Recordset3);
if (isset($_GET['totalRows_Recordset3'])) {
$totalRows_Recordset3 = $_GET['totalRows_Recordset3'];
} else {
$all_Recordset3 = mysql_query($query_Recordset3);
$totalRows_Recordset3 = mysql_num_rows($all_Recordset3);
$totalPages_Recordset3 = ceil($totalRows_Recordset3/$maxRows_Recordset3)-1; -
IF and ABS condition statement in BEX query designer
Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
ArnoldHi Arnold,
Thank you,
Nanda
Maybe you are looking for
-
Can I move my iTunes library from a Mac to a PC? (iOS to Windows 7)?
Hi everyone, I currently have an 24" iMac, but I'll be traveling overseas and I'd rather not have a MBP (I know, right?!). I am planning to get a Sony laptop. Is it possible to move my iTunes library over? Please let me know! =D My iTunes library is
-
Sales order stock error in Process order confirmation
Hello SAP Gurus, In Make To order scnario while I do COR6 order confirmation it gives me Error that Sales order stock does not exist. Can anyone suggest me which way I can remove the error? What is the Transaction and movement to transfer stock to SA
-
Schedule reports and wait until the report complete
I have wrote a java program to call BO SDK to schedule several crystal reports (same report, run at once with different parameters) to an unmanage disk. The program run successfully and can generate the reports. I would like to add an email notificat
-
Hi, Pls explain me what is query analyzer. our client is goint to ask us to implement the query analyzer before applying any sp or packages in our production setup. Kindly give some idea on how to configure, whether its any third party tool and how t
-
What does a grey screen with a cloud in the middle mean?
Hi Guys, I'm restoring from time capsule, last I saw it was at %30 but now has a cloud symbol on a grey background. What does this mean? Cheers