Unreliable, mainly non-existent tether with Nikon D800 (current firmware) to LR5.4 running on Macbook OS X 10.7.5. Tried all steps in LR help, plus using different Macbook. tethering tethered
I recently upgraded my camera from Nikon D700 to D800. For two weeks tethering to LR 5.3 worked impeccably. The day before a major shoot I upgraded to newly released 5.4 which promised tether support for my backup camera, Nikon D 610, although 5.4 still does not seem to recognise the 610!
For the first two days of this commercial shoot tethering to D800 also worked perfectly, then started to get intermittent, and Macbook gave message that USB drawing too much power and device needed to be removed (I've external drive and camera in the two USB sockets.) Then after that it only worked sporadically for a few frames. It sees contents of camera disk, but tether is sometimes there, then vanishes.
The remaining three days of my shoot were a major headache, with me spending every evening working through LR Troubleshooting page - tried the entire page. Introduced a powered USB 3 hub, different USB cables, different Macbook…everything!
Tethering works with Mac's Image Capture, and like a dream with a trial version of Capture One.
Apple Genius Bar and they checked it out – it did the same for them, and all they could conclude was that the issue is down to LR. They connected the camera to Aperture on their own Macbook and it tethered flawlessly. I’ve had to instal this to do my tethered capture whilst this issue persists. Anyone else had this issue and how did they overcome it?
Ugh. Apparently "messing with it" is still the answer. I decided to try the LinkSys router I was using before I bought the Time Capsule, and my iPhone connected with no problem.
I went through the steps again, and after rebooting my Time Capsule this time, I can connect again. The troubling thing it that this started with a power-off of my iPhone. No changes or installations, just a reset. Am I going to have to reboot my Time Capsule (which has no power switch, just a cord I have to unplug) every time I reboot my iPhone?
Jinkies.
Similar Messages
-
Lightroom 4 tethering unusable with Nikon D800
I am on LR 4.4 using Nikon D800E.
I had been using LR tethered with some intermittent locking issues since LR 3 with my Nikon D300.
About 4 months ago, I purchased a Nikon D800E and started to use it tethered (as I had done with the D300) with LR 4.
It would lock up consistently and I would have to reboot the computer to regain functionality. This would happen so many times during a shoot, that tethering just became unusable.
After much testing, It turns out that the problem occurs when the camera's buffer reaches zero. LR consistently is unable to recover from this zero condition. Periodically it will allow one more shot after a bit (as if it tried to recover), but the shot in LR has an esclamation mark by it as damaged data. And at that point it will never recover without a complete computer reboot.
I'm shooting with a team in studio - I can't have LR be this flakey - It is not acceptable to not be able to reach a zero buffer condition while shooting (I'm using Profoto and it can recycle faster than the camera can send to LR). It is not usable in its current state tethered with a Nikon D800. Just not usable.
I had to switch to using Nikon's Camera Control 2 (which functions perfectly and never has trouble recovering from a zero buffer condition), until Adobe can fix this significant bug.
Come on Adobe - Fix your software so it functions.
P.S. I also noticed that conveniently Adobe removed the functionality of their report a bug link.After exhaustive testing (including trialing Phase One's Capture One Pro 7), it appears to be a bug in Adobe's SDK used in both LR4 and Capture One Pro 7.
Here is the results:
Well this has been over a month of testing.
The problem is that the D800(E) can't recover from a zero buffer condition when shooting tethered with LightRoom 4 or Phase One's Capture One Pro 7.
It recovers just fine when using Nikon's own Camera Control Pro 2.
This started when I moved from the Nikon d300 which I had been shooting tethered with LR4 just fine, to the D800E. If I shot faster than the buffer and got the buffer down to zero, the next shot would produce a digitally corrupted image and then stop functioning. The buffer would not free up. It would take a reboot of the software to get it working again. Sometimes just turning the camera off and on would get things working again.
I was sure it was Lightroom, as I had tethering instability with earlier versions of LR. So I switched to using Nikon's Camera Control Pro 2 to tether and the problem went away. So I was sure it was LR. I also posted within the LR forums and another user experienced the exact same issue.
Today, I installed Phase One's Capture One Pro 7 software ( lists the D800E as supported for tethering - confirmed with a phone call to Phase One ).
Exact same issue. Exactly the same.
So, tomorrow I'm contacting Nikon because I'm thinking it has to be their SDK that they're providing to both Adobe and Phase One.
Oh and I also upgraded to the just released Nikon D800 firmware - no change.
If it's their SDK it means there's little chance of a solution in the near future, because first waiting for them to fix it and then waiting for the vendors to upgrade to the newest SDK release.
So apparently the ONLY way to tether with the D800 is Nikon's own tethering software, which although the tethering is reliable and fast, the viewing, etc is tedious at best. -
Will there ever be an upgrade for Lightroom 3 that will work with Nikon d800 NEF files?
Will there ever be an upgrade to Lightroom 3 that will work with Nikon D800 NEF files?
Why not use Lightroom 4 instead?
I mean, assuming you can get it running fast enough, you'll usually get better results with PV2012 - right? And in the cases where you prefer PV2010 (if there are any), it's there too...
R -
Just imported a large picture library from Aperture to LR 5.7.1- Can't view Nikon D800 NEF files in LR5. The projects and files loaded - but no thumbnail view of the image
I have a Nikon D50 nef on my desktop. Double-clicking on it opens Photoshop, which launches Adobe Camera Raw. If you get that far and can make adjustments in the ACR panel, you are fine. That's what opens first.
Then you click "Open" in ACR and your nef opens in Photoshop and the document tab on top gives the .nef extension. You make your edits there, but if you close Photoshop, you won't save it as nef, it won't be in the Save file list. You save it as psd for example and close Photoshop.
You now have a nef with develop settings on your desktop and the psd you saved out of Photoshop.
All perfectly normal as J.J. said, Photoshop will edit the nef file, but it will be saved in a format other than nef.
Gene -
trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.
Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John -
I have a new Airport Extreme that works great with my IMac but keeps dropping out on our Windows 7 PC. I have tried all 11 2.4 Ghz channels and they all have dropout issues. Any suggestions?
Hello sstefanik
Check out the articles below to troubleshoot your issues with getting a proper connection with Wi-FI. Try creating a new Network Location and join your network to see if you can get on that way.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G. -
Conflict with Nikon D800 and CS6
I have been having an issue with files from my D800 when opening them in Photoshop CS6. I should note that this issue has never been a problem with any other camera that I have owned and used with CS6 (D3200, D7000, D80, Kodak Pro SLR N, Hasselblad H3D).
When attempting to open a number of files, ONLY from the D800, I seem to be limited to 10 or 11 files max. Once it loads that quantity I get an error message that it is out of resources. I had chalked it up to the tif files that I typically work with being 16-bit files at a little over 200MB each just being too large to open in any higher quantity.
Last evening I shot a graduation party for a friend and had inadvertently set the camera to shoot "basic" (lowest possible quality) jpg's at a file size of about 3MB each (still 7830 X 4912px). When I tried to load them into photoshop to do some dust clean-up and a few minor tweaks I was surprised to find that it still would only open 10 files before giving me the same error message.
Has anyone else had this issue? If so, I would appreciate hearing how you may have adjusted settings in either the camera or in CS6 to resolve this issue. Again, it has never been an issue with any other camera I have used, and the Hassy is 39MP so file size shouldn't be the problem. It seems to be something in conflict between photoshop and files from that specific camera. To further elaborate and head off the next question, yes, this seems to happen with other D800's as well as I have rented a couple of others while this one was at Nikon for warranty repair and those cameras had the same issue with CS6.
Thanks in advance for any suggestions you may have.Noel, here is the information for you. Hopefully it's helpful.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6092 MB
Free memory: 1977 MB
Memory available to Photoshop: 3255 MB
Memory used by Photoshop: 71 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics Family
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: Intel(R) HD Graphics Family
OpenCL Unavailable
Driver Version: 8.15.10.2476
Driver Date: 20110809000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics Family
Video Card Memory: 2822 MB
Video Rect Texture Size: 8192
Serial number: 91198181452695744567
Application folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\Arnalpix\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 570.1G, 370.0G free
Required Plug-ins folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.3
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Pinch 13.0
Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
ZigZag 13.0
Optional and third party plug-ins:
Noise Ninja NO VERSION
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
Itunes won't connect, status bar goes about half way and stops, then times out. I have tried all fixes posted, you name it, I have done it. Running Vista and current version of Itunes. Can connect to Internet with any other app. Using Firefox, their latest version if that matters.
I have seen this is an on going problem throughout the Itunes community. All I can say is 'Bad Form Apple, Bad form.'One more odd thing. The itunes diagnostics believes my windows firewall is on which is it not (believe me I've checked/double checked etc) AND believes itunes is not enable in windows firewall which it is, if ever I turned WF on. How can itunes get this wrong? I mean, if itunes believes its being blocked, maybe that's why I'm being blocked...has anyone heard of this?
-
I imported my D800 nef files into lightroom 4 and found that you can't then open them in photoshop CS5. I then tried opening them directly into photoshop and that didn't work either. On spec I re imported the files into lightroom but converted them to DNG during import. Then I was able to transfer them to photoshop with no problem.
This may help some of you who just bought the fantastic D800.
MikeThere is a post in the Lightroom Journal recently which will explain the issue fully. Support for your camera was only done in LR 4.0 which is the equivalent of ACR 7 and also in ACR 6.7 release candidate.
http://blogs.adobe.com/lightroomjournal/ -
Firefox and Yahoo suddenly, for me, stopped working insofar as being able to open my mail.
I removed Firefox from my system and re-loaded it. Same problem.Hmmmm, http://www.seattlepi.com/ loads fine hear in 10.4.11, FF 3.6.8, but I do see it uses some kind of Flash.
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
Might be later ones around also... saw 11.3 I think.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
You should also consider the Shockwave Player, which displays Web content that has been created by Adobe Director, much used for multimedia: For PPC Macs: http://get.adobe.com/shockwave/
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html
Then Test Adobe Shockwave & Flash Players...
http://www.adobe.com/shockwave/welcome/ -
Why can't I down load a free app I get a message that there is a problem with my payment method but I gave all information correctly , I did recently change my card no because I lost my old one .i did change the no. On my account HOPE YOU HAVE SOME SUGGESTIONS I DON'T SEE WHY THEY HAVE TO CHECKMY PAYMENT METHOD FOR A FREE GAME
Contact iTunes customer support.
We're all users like yourself and as such have no access to your account. -
I have Firefox 18.0, AdBlock 2.2.1, am up-to-date on my Windows 7, have no bugs nor viruses, but still there are "fake" hyperlinks embedded in websites. Also, rollover ads are making a presence again. Any suggestions? Tweaking the Java settings doesn't help. I haven't done Flashblock it blocks a lot of my work crud, but would be willing to deal with that annoyance if someone feels that it would be the resolution to my problem.
There are a lot of IntelliTXT like ''ad'' pop-ups possible.
If your current Adblock Plus filter settings aren't blocking some pop-ups then it is best to take this to the Adblock Plus forum.
* https://adblockplus.org/forum/
* http://en.wikipedia.org/wiki/Category:Internet_advertising_services_and_affiliate_networks
* http://en.wikipedia.org/wiki/IntelliTXT -
Hi guys
I tried the last two days everything from this forum. Run bootcamp, after restart (hold alt) go to the mac HD and delete or replace the bootcamp device (tried both options). had it almost done, at the end when it was installing/finnishing windows the error code "could not prepare the computer to boot into the next phase...... " and of course after that the "no bootable device insert boot disk and press any key boot camp".
Please help me to fix this thing!
Thanks a lot!
hopelessdumbPlease only use 1 thread https://discussions.apple.com/message/25160426#25160426
-
Entering any website, such as www.facebook.com or www.yahoo.com, for example, directly onto the address bar reads a 404 error. Entering them onto the Google entry bar, I get a Google page that looks more like Ask.com before getting a 404 error when clicking onto it.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
i would like to download all my iPod songs on my new ipad2 and MacBook. However I get a message that the iPod was previously used on another computer. Can I manually install on the iPad and MacBook? Most of the songs were previously downloaded from CDs
Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2
Maybe you are looking for
-
Hey! So basically, I've been using my Wifi connection (from home) lately, I had no troubles what-so-ever. I turned on my 3G network this morning, and again, everything's going perfectly fine with my connection. I came home around half 4 from school a
-
have been using firefox for a while updated this morning an now it will not start up, page goes blank and says something to the effect that firefox can not access the web through the browser, bing is what i use, i like firefox because i can block the
-
Office 365 subscription - 60 minutes not included(...
Hello, I have purchased a Windows tablet which has Office 365 subscrption including skype 60 minutes. I live in Germany. I could not see these free minutes under Services and Products in my Microsoft account. The FAQ for the tablet says: The basic p
-
Mail and Gmail two-step verification
For the last several days I've been encountering an issue with Mail.app and gmail where my application specific password is valid for one day only. This is not the case for the application specific password I have set up to work with Mail on my iPhon
-
i'm tryiong to upload a podcast but its not working here is the link to the rss feed http://www.geocities.com/alexandjoeypodcast canu please tell me what i am doing wrong Message was edited by: blink470