Unselect rows in WAD automatically

Hello experts,
how can I unselect automatically selected rows in an analyse item in WAD, if I switch to another tab-strip e.g.?

Hi Robert,
    Yes there is a Way to Do this.
Here is how.
1) Click on the First Tab Panel and Go to Edit Mode.
There are 5 Things you can change here
   a) Caption
   b) Icon
   c) Activation Action
   d) Deactivation Action
   e) Subordinate Web Item
What you need to change is the *Activation Action. *
Command.
If you click on the Command then Command Wizard Should Pull Up.
When Command Wizard is Displayed Do the following.
1) Click on ALL Commands Tab.
2) Click on Commands for Web Items to open it.
     From that List Pick the First Command. Click on BACK_TO_INITIAL_ITEM_STATE. This will highlight that option.
3) Click on NEXT at the bottom of the Command Wizard.
4) Pick the Target Web Item -> Analysis_ITEM_1 if that is the one on Tab 1
5) Click NEXT.
6) Click OK
7) Click OK
Repeat the Above Steps for Tab Panel 2.
I have got this to work. Get back if its not working.
Hope this Helps!!
Datta.

Similar Messages

  • ADF treetable - Identify RightClick of selected vs unselected row

    Hello,
    We have a tree table with client and server Listeners set for selection and contextMenu types
    TreeTable is set to use contextMenu select = true
    Use Case 1
    User selects a Row
    selection listener fires
    Use Case 2
    User right clicks a selected Row
    contextMenu listener fires
    Use Case 3
    User right clicks a unselected Row
    selection listener fires
    contextMenu listener fires
    We need to differentiate between Use Case 1 and 3
    For Use Case 3, our requirement is to suppress/ignore the firing of selection Listener
    A possible approach could be to read the event source (tree table) and check if any immediate oncoming event is of type contextMenu, and then bypass the code inside selectionListener
    Any pointers ?

    Couple of points
    1. The documentation mentions the use of getRowKey() which is returning null
    The highlighted row key is established as a currency in the table when the action for context menu item is executed. The currency in the table can be retrieved by calling "table.getRowKey()"
    2. As posted, we are interested to know if the row was right clicked and then disregard the selection Listener. The server listener for context menu select is fired after the selection listener. So we need help
    Any pointers ?
    Thanks

  • Create new row in Report automatically

    Post Author: miwalker
    CA Forum: Crystal Reports
    I have a report that contains a table with a row for each week and columns containing totals for how many defects are in each state (i.e. Open, Verify, Closed).  Each week I update the table and add a new row with the totals for that week.  I also have a bar graph that displays this information graphically. Is it possible to create a formula that when I run the report it automatically creates a new row in the table and updates the totals rather than me having to do it manually?  If I can do that I would then like to use a scheduler to automatically run the report each week. Thanks,    

    Post Author: miwalker
    CA Forum: Crystal Reports
    Thanks Mavrick5.  I was able to generate the correct date now, but I'm still having problems getting it to write on a new row.  Row #1 will contain the running totals of each "state" for the week.  I then want a new line generated when I run the report the following week with the totals for that specific week, and so on as the weeks progress.  Right now it just keeps overwriting the first row. Is there a function I can use in the formula to get it to write to a new line? I've been looking through the forum but haven't found anything on this subject. Thanks,

  • Delete Row in WAD layout for input ready query

    Hi All
    I am using WAD for planning applications.....when i execute the Web template, it is displaying the query in edit mode which is ok... i am able to edit and insert the records in layout but i didn't find any option for deleting row...i couldn't see any command button for delete functionality in WAD...
    please help me out......how i can get delete functionality in my user input query opened in WAD
    Thanks
    Tripple k

    Hi
    Thanks for your help...but that is not going to help...by the way i am surprised why SAP has removed these basic functionality from IP while they are there in BPS..like add row delete row...in WAD if we dont have option for new line...we have to specify the no. of new lines in prior....also if user has filled the new lines then next line will not come untill he save..trhis is ridiculas....i am not able to find any wayout for these silly functionality
    Thansk
    Tripple k

  • New Rows in WAD with Free text characteristic

    I have created an input ready query and one of the characteristic (based on InfoObject 0POSTXT) created is to enter a free text for the given row.  In row selection there are also few more characteristics with master data already created.
    If I use BEx I am in position to enter free text and choose relevant master data for remaining characteristic and plan for my key figures, Works perfectly fine.
    I have now created a new WAD template assigning the input ready query and when I execute the same I am not in position to enter the free text for my text characteristic.  In WAD Application I am forced to choose the value from the available F4 help otherwise I get the invalid value error.  So BEx works fine but not the WAD.
    Any ideas what piece of configuration I am missing?  Any help is highly appreciated.  I have already selected Key (in value Display), in access type of value selection I tried all options with no luck.
    Regards,
    Sachin

    Hello Sachin,
    enter values for characteristics without master data table is only possible in BEx Analyzer.
    Also in BI Planning Functions one can create values for characteristics without master data table.
    For the BEx Web Analyzer this is not implemented; this feature is on the list of possible further developments. It not yet clear whether and when features from the this list will be developed.
    Regards,
    Marc
    SAP NetWeaver RIG

  • Error in entering a new characteristic value using input ready row in WAD

    Hi Guys,
    I have created input ready query with input ready row option to enter both characteristic and key figure values.  I have created info object without master data tick in Master data/text tab  to enter free text which inturn will create a new record in master data. It is working in Bex analyzer, here I can enter any value to create a  new entry in the master data but where as in WAD  I am getting error message reading invalid values. In WAD I am restricted to choose only available master data entries. Do I miss any settings in WAD. Your help will be highly appreciated.

    Hi,
    the feature you are requesting is called "Master Data Planning". Unfortunately it is not supported by SAP. Please use the term "master data planning " to search this forum and you will find some threads about this issue.
    Hope this helps
    Matthias Nutt
    SAP Consulting Switzerland

  • Multiple row resizing or automatic height fit

    Hi,
    I have just opened a very simple excel file in Numbers. The workbook consists of only 1 sheet and one table with 3 columns and around 30 rows; is just a list. The problem is that, when I Opened, the text didn't fit the height of the rows, so I had to manually change the row heigh.
    Is there any way to change the heigh of multiple rows or just something like the "autoFit" feature in excel?

    I am not sure if this is what your asking or not, but if you select a single column or row, then use the little blue dot to extend the selection. now you can grab the right/bottom edge where you see the gripper markings and you can change the width/height of all the selected columns/rows.
    Autofit for columns is not there (That I can find it). but rows are automatically autofit in height. If you have some text that wraps in the cell, if you make the column wide enough, you will notice that all the rows get smaller in height to fir the unwrapped text.
    Hope this is even close to what your asking
    Jason

  • Ho do i unselect the "Do this automatically for files like this from now on." in the download dialog box?

    I have mistakenly clicked on the "Do this automatically for files like this from now on" in the download dialogue box. I want to open a pdf in adobe when I click on the link. currently the file just gets saved and I cannot change it. I have read thru the suggestions and gone into tools> options> applications and reassigned all of the pdf options to ask first and firefox still just downloads the files to somewhere. I don't want this option and I need to unselect the automatic box.
    How do i do so?
    I would really like to talk to someone on the phone.

    Ok, do this:
    #Go to www.getfirefox.com, and download Firefox. Install it over your current version of Firefox
    #After installing Firefox 18, then try to Reset.

  • How to set the current row in table automatically when tabout from one row to next row

    Hi
    I'm using jdev 11.1.2.0.0
    How can we set the  row(in which row focus is)  as current row in the table?
    If we create a table with single row selection, then whichever row we select, that row becomes current row because of the selection listener(#{bindings.xxvo.collectionModel.makeCurrent}).
    Then if we do tabout from one component to another component in table and moved to next row, then the focus would be on another row .
    when focus is shifted from one row to another row, then how can we make the focused row as current row or selected row.
    Any suggestion would we appreciated
    Thanks.

    Add clientListener inside table component and set client listener type to dblClick with method as a JavaScript method name.
    <af:clientListener method="dblclk" type="dblClick"/>

  • Unselect rows in tableview

    Hi,
    When I select the selected rows in MULTISELECT mode but when i try to clear that by clearing selectedRowIndexTable it is not working.
    What should i do ?
    Regards,
    Manav

    HI,
    U can try using the following code
    LAYOUT
        <htmlb:form>
         <htmlb:tableView id="tab1"
                      table="<%= itab %>"
                     visibleRowCount="8"
                      design="ALTERNATING"
                      footerVisible="TRUE"
                     selectionMode="multiSelect"
                     keepSelectedRow="true" >
         </htmlb:tableView>
    <htmlb:button  id = "but1"
                   onClick="test"/>
         <%if itab3 is not initial.%>
       <htmlb:tableView id="tab1"
                      table="<%= itab3 %>"
                     visibleRowCount="8"
                      design="ALTERNATING"
                      footerVisible="TRUE"
                     selectionMode="multiSelect">
         </htmlb:tableView>
       <%endif.%>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    TYPES
    types : tab type table of ZNW_SID_NUM_TEST.
    types : row type ZNW_SID_NUM_TEST.
    PAGE ATTRIBUTEs :
    Irow type row
    Itab type tab.
    Itab3 type tab.
    Itab2 type selectedrows.
    Rowselected type string.
    onCreate
    select * from ZNW_SID_NUM_TEST into corresponding fields of table itab
    onInputProcessing
    CLASS CL_HTMLB_MANAGER DEFINITION LOAD.
    IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
      DATA: event TYPE REF TO CL_HTMLB_EVENT.
      event = CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
    if  event->id = 'but1' and event->event_type = 'click'.
      DATA: tv TYPE REF TO CL_HTMLB_TABLEVIEW.
      tv ?= CL_HTMLB_MANAGER=>GET_DATA(
                      request      = runtime->server->request
                      name         = 'tableView'
                      id           = 'tab1' ).
    IF tv IS NOT INITIAL.
    DATA: tv_data TYPE REF TO CL_HTMLB_EVENT_TABLEVIEW.
      tv_data = tv->data.
    refresh itab2.
    refresh itab3.
    call method tv_data->GET_ROWS_SELECTED
          receiving selected_rows = itab2.
    endif.
    data : ind type SELECTEDROW,
           row_s type row.
    if itab2 is not initial.
        data :rw LIKE LINE OF itab.
        loop at itab2 into ind.
          READ TABLE itab INDEX ind-index into
          rw.
           if rw is not initial.
           row_s = rw.
          append row_s to itab3.
          clear row_s.
          endif.
        endloop.
    endif.
    Endif.
    This gets the values selected in Multiselect mode and displays them in another table.
    Hope this helps,
    Regards,
    Siddhartha

  • How to select all rows in table automatically after refreshing?

    Hi,All
    After refreshing the table,I want to select all rows,like MultipleButton's function.
    How can I do?
    Thanks
    Smile.

    Hi,-Grif-
    * Set the selected state for the given row groups
    * displayed in the table.  This functionality requires
    * the 'selectId' of the tableColumn to be set.
    * @param rowGroupId HTML element id of the tableRowGroup component
    * @param selected Flag indicating whether components should be selected
    function selectGroupRows(rowGroupId, selected) {
      var table = document.getElementById("form1:table1");
      table.selectGroupRows(rowGroupId, selected);
    }I don't know that the parameter selected is a boolean,or the checkbox(radio button) id?
    Thanks
    Smile

  • How to get the rows in a multiselect table automatically checked?

    Hi,
    I have retrieved all the rows whose job status is 'Manager'. Now i need these rows to be automatically checked when a button is clicked.
    how do i do this?
    Please reply as soon as possible.

    Hi,
    is this a new thread or is it a duplicate of http://forums.oracle.com/forums/thread.jspa?messageID=2339633
    Frank

  • Is it possible to increment the table rows automatically?

    In my HTML page I created one table with some columns but i'm unable to write code for incrementing the rows dynamically....
    i.e.. soon after entering the data in the last column, a new row should be automatically created by pressing enter key (without using any buttons it should create new row).... Is it possible...

    I don't think so. You have to trigger an js event to create a new row, I guess. You may need to write lot of javascript code. You can look for some third party grid controls.

  • USER INTERFACE IN FXML with some automatic row insertion

    Dears!
    Pls answer that
    I want to create a data entry from which contains a row with 5 columns like this
    sr# partyCode partyName particulars amount
    Now I want that when i enters values in this row and press enter key then a new row is created automatically and I want sr# value to start from 01 and increase automatically too after every enter key pressing.
    Pls help
    BR
    TANVIR

    tanvir ahmed wrote:
    Dears!
    Pls answer that
    I want to create a data entry from which contains a row with 5 columns like this
    sr# partyCode partyName particulars amountYou probably want to use a GridPane for this, with one row of Labels for the headers and rows of TextFields below. There's a [url http://docs.oracle.com/javafx/2/layout/builtin_layouts.htm]tutorial for the layout panes.
    Now I want that when i enters values in this row and press enter key then a new row is created automatically and I want sr# value to start from 01 and increase automatically too after every enter key pressing.Just create a controller (see [url http://docs.oracle.com/javafx/2/fxml_get_started/fxml_tutorial_intermediate.htm]this part of the tutorial) and register the appropriate listeners ([url http://docs.oracle.com/javafx/2/events/convenience_methods.htm]tutorial) with your text fields to add new items to the grid pane as necessary.

  • Automatic Row Processing (DML) - Return Key Into Item

    Hello,
    This question is on Apex 4.2:
    I'm Displaying the [UNIKEY] column value after the record is inserted into the table using :
    page process > process row table_name > Source: Automatic Row Processing (DML) > Return Key Into Item > "Item Name"
    This works fine while inserting records, my question is why this does not respond on update / delete ?
    ϯ LT

    LT
    Check your branches.
    What might be happening is that on insert and update an other branch is followed.
    Where the branch of the insert either isn't clearing the cache of the page or is setting the item with it's own value.
    The branch on the update on the other hand is clearing the cache of the page and not setting the item.
    With a delete there is a clear cache process generate by the wizard. Check if this process is only running on the delete and not on the update.
    From memory the process is called something with reset.
    If the above doesn't help try to replicate the problem on apex.oracle.com and give access with a guest developer account so we can have a look.
    Nicolette

Maybe you are looking for