Update 2.0.1 results in wifi failures

I updated to iPod Touch software 2.0.1 on the day it was released. Having set up all of the wifi access points I connect to regularly under 2.0, everything worked fine. I could even connect to other networks. Then, I changed the configuration of my home router and went to update the iPod to reflect that.
I clicked 'Forget this network', and restarted the iPod. Now, whenever I go to join it, even after entering the correct WPA2 key, it acts as if it's connected, but only provides an APIPA occasionally. It's almost as if the DHCP service on the device is failing, leading to it not being able to connect.
I've tried resetting all settings, as well as restoring the iPod. I've also tried using WEP and WPA, with the same results. My router will not function as an open AP, so that isn't an option, unfortunately.
I'm honestly stumped as to what this could be, because it survived a restore. I've just got a sinking feeling that it could be the result of the firmware update that accompanied 2.0.1.
Any ideas?
Thanks.
EDIT: I found the following thread on MacRumors, which seems to describe the same problem I'm having, but with the iPhone. http://forums.macrumors.com/showthread.php?p=6021787

A lot of speed improvements, but sadly the iPhone ringer issue is still present. That is the ringer volume goes down from time to time for no apparent reason (gets confused with the iPod volume and sets the ringer volume to that volume)

Similar Messages

Dear Customer, It hase come to our attention that your account billing Information records are out of date. That requires you to update your Billing Information. Failure to update your records will result in account termination records... Click on

Dear Customer,
It hase come to our attention that your account billing Information records are out of date. That requires you to update your Billing Information. Failure to update your records will result in account termination records...
Click on the reference link below and enter your login Information on the following page to confirm your Billing Information records..
Verify Now >
Wondering why you got this email?
It's sent when someone adds or changes a contact email address for an Apple ID account. If you didn't do this, don't worry. Your email address cannot be used as a contact address for an Apple ID without your verification.
For more information, see our frequently asked questions.
Thanks,
Apple Customer Support
TM and copyright Â© 2014 Apple Inc. Apple Sales International, Hollyhill Industrial Estate, Cork, Ireland. Company Registration number: 15719. VAT number: IE6554690W.
All Rights Reserved / Keep Informed / Privacy Policy / My Apple ID
Anyone else get this today?
And yep i know this message doesn't go here however the ability to post in general postings to most viewers is lost to me in the ridicules way apple setup there support

It's phishing. Forward it to [email protected] and then delete it.
(118880)

Updating mavericks 10.9.5 turns wifi into Yosemite crap

After updating Mavericks to 10.9.5, wifi problems start to resemble Yosimite's wifi problems. Instead of getting better results with apple's software upgrades, wifi connection drops more frequently. It's getting to the point where things become annoying and frustrating. I purposely did not want to upgrade to Yosemite because of the wifi bug that everyone is experiencing for many months. But now in Maverick after the last upgrade, things are becoming more like Yosemite.
Is apple gonna do anything about this? Or we just have to follow all possible instructions from the net, and still experience wifi droppings for Mavericks and Yosemite?
I have tried many possible ways to fix Yosemite - http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/, but connection still drops very very frequently.
Now on my other machine running Mavericks, things are looking the same, wifi drops very frequently, I have to switch off and on the wifi about 20 times daily.
APPLE do you have a fix for Mavericks and Yosemite WIFI PROBLEMS ??????

1. Its too bad apple dont monitor these forums, or maybe they do, but they just dont know how to fix the wifi issue that everyone is experiencing, and has been going on for a long time. Thanks for the feedback link, i have wrote a few of them in the past and im sure everyone else hv written feedback about wifi.
2. I use a router from isp and also tried airport express. I dont think its a router issue becoz i have used this same router for a year and on my macmini running mountain lion, wifi never drops. And when i travel, using macbookpro running mavericks, wifi drops, and surely its not an option to use an airport extreme when traveling or at a friends home...i mean we cannot replace routers everywhere we go, those cheap routers still work with other computers, even mountain lion. Its the expensive computers that needs improvements, but obviously the latest updates for mavericks made it like a crappy yosemite. One thing i notice is apple really improve their way of marketing their products, their advertisements are looking very nice now.
I think replacing routers is not a solution, the only solution right now is to switch off wifi and switching back on again and again, thanks to the sophisticated innovation from apples yosimite and latest mavericks. Today i have done that about 20x.

My iphone 4s and ipad 2 both with 7.0.4 update will no longer connect to wifi but non-mac lap top has no issues

my iphone 4s and ipad2 both with 7.0.4 update will no longer connect to wifi.
About three days ago the ability to connect came and went and the connection never lasted more than 10-15 minutes; it has not been able to connect since last night. I do not think it's my wifi router as non-mac lap top has no issues. I have seem many similar questions posted.

Reboot your router by removing all power from it for about 15 seconds. Also, if your router still has its default SSID (such as LINKSYS, DLINK, NETGEAR, etc) change the SSID to something unique. Note that all other devices on your network will have to be reconnected if you change the name, but if the name is still the default that is most likely your problem.
If the SSID is not the default then the reboot should fix it.

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same probl

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.

Satellite L505D-S5983
I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
Then add things carefully, rebooting Windows and testing the USB and audio at each step.
Please note this.
The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
All of the latest drivers for your model are easily found here. This one is for the sound.
Realtek Audio Driver for Windows 7 (32/64)
-Jerry

After 10.7.4 update can no longer see home wifi signal

Ever since I updates my MacBook air my home wifi ( the one I used for the update) no longer shows up on my computer. It shows up on my mac mini and iPad and my MacBook air can connect to other networks. Any ideas?

No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

TS1398 Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi

Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi

not much response in here which surprises me...
Anyway... AS I am still looking for answers, I will share a couple of points that I realised...
in Airport Utility, I noticed that my iphone MAC address was actually showing as client connected, despite my phone network showing the spinning wheel next to the network name for ever and never actually connecting.
I am currently testing the router mode in Network to be on DHCP and NAT mode with a range from .2 to .200
My phone is now connected....
Everything seems to be ok and happy so far...
strange that this router and phone have worked together for at least a couple of years, the phone works everywhere else, and all other toys connect to my WIFI just fine. the list is as follow:
airport extreme
Zeppelin air
2x apple tv
2 ipads
iphone 4s
2 mac
1 pc
I have litterally just hard reset the router with a pin just now as a last resort... same...
I will leave the router as DHCP & NAT until a potential firmware or OS update...

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later.

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?

Try disabling your firewall; both on your PC and the external Firewall/Router.

WSUS throwing 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal."

Hello,
Within the past two months our WSUS Server started throwing error 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal." We currently have 252 computers with errors in WSUS,
and 33 updates with errors. We have never had issues up until two months ago. If you keep rebooting the machine, and keep running updates, they eventually all install. I believe I will see the machines with errors go away as the weekly scheduled
WSUS install runs over and over, and the machines reboot.
- We run IE8 in our environment and sometimes IE9.
- We have 300 clients, all running Windows 7 SP1 x64.
- Our WSUS server is running on Server 2008 R2. The WSUS build number is 3.2.7600.262.
- We created an alternate WSUS 4.0 server on Server 2012, and redownloaded all updates. We put one client on it and it is showing errors on 3 updates, KB890830, KB931125, and KB2917500.
- Clients are throwing errors 800F0902, 80242016, and 80070005.
- I've noticed something with the C:\Windows\SoftwareDistribution\Download folder on the clients. When an update runs and fails, there is a "Install" folder created inside this folder. If you try to open it after the failure you get
"Access Denied" If you reboot the machine, the install folder goes away. (I assume this is a temp folder created to run updates). I've checked the permissions on this folder on various machines and all seems normal. I think
this is the root of the problem, and why we need to keep rebooting to get all of the updates to run.
- I tried deleting the Software Distribution folder on a client after stopping the update service, then restarting the update service. The folder redownloads but the client still throws errors.
- I've gone through our Group Policies looking for anything that can cause this and found nothing. We've created a test OU blocking inheritance, and only applying a WSUS policy in it to make it get the updates internally. I then rebuilt multiple
machines using Dell KACE, and still had failures.
- We run SEP 11 and 12 on our clients. I've tried removing the AV, making sure the firewall was off, etc. It still throws errors.
- I've spoken with our network team, and installed wireshark on a few clients looking for network errors and found nothing.
- I've tried various Dell KACE scripted installs on test machines (erasing and rebuilding the machines from scratch), after which I run Windows Updates from WSUS. They have thrown errors.
- I've rebuilt a machine using Dell KACE, undomained it, then ran updates externally from WSUS going to Microsoft's site, and I'm still getting errors.
- I've tried removing all software from the Dell KACE build to where it is just installing the OS and I'm still getting errors.
- I tried taking a plain Windows 7 x64 DVD and installing that on a test machine, then without domaining it and without installing any other software, running updates from Microsofts update site. This seems to work, althrough it does throw some errors
but I believe those are related to having to reboot your machine in order to complete the updates (I can't remember that error code at the moment).
Has anyone else been experiencing this? Any suggestions as to how I can fix this?

Hi,
Error 800f0902
Please try the method in this thread:
Error
Code: 800f0902
Error 80242016
If you receive Windows Update error 80242016 while checking for updates, it might be caused by a connection interruption between your computer and the Windows Update servers.
80070005
Usually means access denied
Since it worked perfectly for a while, did you make any change on the server? Any applications new installed on clients?

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

Hello SuzMiller
Check out the article for the troubleshooting steps for issues with email on your iPhone and iPad.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

After updating to 10.8.3 my wifi won't power on

After updating to 10.8.3 my wifi won't power on.
When I click the "turn wifi on" button nothing seems to happen. Anyone else having this issue? Was working fine before update.

You could try changing Location:
Click whatever is there and select Edit Locations. Then click the + sign and create a new location - matters not what you call it. That might bring to life the "turn wifi on" button.

OS X Mavericks v10.9.4 Update still does not fix the wifi shut off in sleep mode problem

OS X Mavericks v10.9.4 Update was supposed to fix the wifi connectivity problem with my iMac. Wifi disconnects in sleep mode and does not connect when awakened. Must reconnect manually every time. PITA.

Your observation is correct about wifi disconnection in sleep mode. That is normal, you may want to check to see if your Mac supports Power Nap/is enabled- OS X: About Power Nap
The reconnect should be automatic within a few seconds.
Does it happen with multiple wifi networks or just one?
Have you tried deleting and re-adding the wifi network?

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

HT5934 is there a fix for 4s wifi failure?

Is there a fix for the 4s wifi failure? It's really sad that Apple has not publically addressed this issue or responded to any of the "posts" I've been reading.

My 4s is chugging along. What WiFi failure are you referring to?

How to update the test case result in MTM using C#

Hi
I have tried the following code but when I execute the same I am getting the testcase result as "In Progress".
How to update the testcase execution result as Passed.
I tried the below code:
public
static
void UpdateResult()
TfsTeamProjectCollection tfs =
new
TfsTeamProjectCollection(TfsTeamProjectCollection.GetFullyQualifiedUriForName(server));
ITestManagementService tms = tfs.GetService<ITestManagementService>();
ITestManagementTeamProject proj = tms.GetTeamProject(project);
ITestPlan Plan = proj.TestPlans.Find(1);
ITestRun testRun = proj.TestRuns.Create();
testRun = Plan.CreateTestRun(false);
ITestPointCollection points = Plan.QueryTestPoints("SELECT
* FROM TestPoint");
foreach (ITestPoint
p in points)
testRun.AddTestPoint(p,Plan.Owner);// null);
testRun.State = TestRunState.Completed;
testRun.Save();
ITestCaseResultCollection results = testRun.QueryResults();
ITestIterationResult iterationResult;
foreach (ITestCaseResult
result in results)
iterationResult = result.CreateIteration(1);
foreach (ITestStep
testStep in result.GetTestCase().Actions)
ITestStepResult stepResult = iterationResult.CreateStepResult(testStep.Id);
stepResult.Outcome = TestOutcome.Passed;
iterationResult.Actions.Add(stepResult);
iterationResult.Outcome = TestOutcome.Passed;
result.Iterations.Add(iterationResult);
result.Save();
results.Save(true);
testRun.Save();
testRun.Refresh();

Hi Mohammed,
Sorry for my delay.
According to your code, I have been modified your code in my side and it can work fine. So you can refer the following code to check your issue in your side.
Reference:
publicstaticvoidUpdateResult()
TfsTeamProjectCollectiontfs
= newTfsTeamProjectCollection(TfsTeamProjectCollection.GetFullyQualifiedUriForName(server));
ITestManagementServicetms
= tfs.GetService<ITestManagementService>();
ITestManagementTeamProjectproj
= tms.GetTeamProject(project);
ITestPlanPlan = proj.TestPlans.Find(1);
IStaticTestSuitesuite
= Plan.RootSuite.SubSuites.Where(s
=> s.Id == 1339).First()
asIStaticTestSuite;
ITestCasetestcase
= null;
testcase
= suite.Entries.Where(e
=> e.Title == "login").First().TestCase;
ITestRuntestRun
= project.TestRuns.Create();
testRun
= Plan.CreateTestRun(false);
ITestPointCollectionpoints
= Plan.QueryTestPoints("SELECT * FROM TestPoint WHERE TestCaseId ="+
testcase.Id);
foreach(ITestPointp
inpoints)
testRun.AddTestPoint(p,
Plan.Owner);// null);
//testRun.AddTestPoint(p, null);
testRun.State =
TestRunState.Completed;
            testRun.Save();
ITestCaseResultCollectionresults
= testRun.QueryResults();
ITestIterationResultiterationResult;
foreach(ITestCaseResultresult
inresults)
                iterationResult = result.CreateIteration(1);
foreach(ITestSteptestStep
inresult.GetTestCase().Actions)
ITestStepResultstepResult
= iterationResult.CreateStepResult(testStep.Id);
                    stepResult.Outcome
= TestOutcome.Passed;
                    iterationResult.Actions.Add(stepResult);
               iterationResult.Outcome
= TestOutcome.Passed;
result.Iterations.Add(iterationResult);
result.Outcome
= TestOutcome.Passed;
result.State = TestResultState.Completed;
result.Save(true);
testRun.Save();
testRun.Refresh();
Note: you will need to
base on your requirement to modify the code such as modify the testsuite id and title in your side.
In addition, I find a blog about TFS API that can help you:
# Code snippets on Test Management APIs
http://blogs.msdn.com/b/aseemb/archive/2012/08/07/code-snippets-on-test-management-apis.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Update 2.0.1 results in wifi failures

Similar Messages

Maybe you are looking for