Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

Similar Messages

Step failure causes sequence failure Option

Hi !
I need some clarification about the Step failure causes sequence failure Option , I'm using TS 4.2 Under Win XP .
Lets say i have a Seq with 4 steps in all of then Step failure causes sequence failure Option is Checked .
Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? and will it record the result for this steps ?
Thank U .
Kobi Kalif
Software Engineer

Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? YES
and will it record the result for this steps ? YES
What this is signifying, is if a Step fails then when the Sequence has completed and returned back to the caller the status of this step will be FAILED.
If you need to jump to Cleanup then you will need to set the Post Action.
regards
Ray Farmer
Regards
Ray Farmer

[svn:bz-4.0.0_fixes] 20615: fixing the regression failure caused by the nest collection level fix, an actionscript type without remote alias will resolved as " className", we should filter out the special case

Revision: 20615
Revision: 20615
Author:   [email protected]
Date:     2011-03-04 12:11:09 -0800 (Fri, 04 Mar 2011)
Log Message:
fixing the regression failure caused by the nest collection level fix, an actionscript type without remote alias will resolved as ">className", we should filter out the special case
Modified Paths:
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/AmfIO.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

HT204053 I have different icloud and iTunes id's and I want to do homesharing for all my devices. I'm trying to set up a new iMac but homesharing is not working. SHould it be the itunes or iCloud id?

I have different icloud and iTunes id's and I want to do homesharing for all my devices. I'm trying to set up a new iMac but homesharing is not working. Should it be the itunes or iCloud id?

Welcome to the Apple Community.
Preferably your iTunes account, but it shouldn't really matter for getting homesharing turned on, as long as it's a valid ID.

How can I resize and reposition the Date Created window for All windows?

When setting view options for a finder window set to list view, I cannot get column resizing or positioning to hold. When making those changes, the option for "All Windows" automatically shifts to "This window only" and it then does not hold.
How can I resize and reposition the Date Created column for All WIndows?

Hi Harmz,
Try dragging this file to the Îesktop & reboot...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist

We are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

we are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

Moderator Action:
You already asked this question, two days earlier.
https://forums.oracle.com/thread/2585158
Stay with your original post. Deliberate multiple posting is the same as spamming the forums.
This new post is locked.

ME21N - new field added and same value posted to it for all line items

hi all
i have added new field under item level in me21n screen.
data for new filed fetched from tables with values entered in header level material number.
For one record, it is ok
but for multiple records, same value is fetched for all line items
i have written coding in screen exit for 0111
and function exits EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
how to solve
pl help
regards
senthil

MODULE STATUS_0111 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
if sy-tcode eq 'ME23N' or sy-tcode eq 'ME23'.
    LOOP at SCREEN.
      if screen-group1 ne 'PCS'.
        screen-input = 0.
        MODIFY SCREEN.
      endif.
    ENDLOOP.
ENDIF.
TYPES : BEGIN OF ty_cabn1,
         atnam TYPE cabn-atnam,
       end of ty_cabn1.
DATA : itab_cabn1 TYPE STANDARD TABLE OF ty_cabn1 INITIAL SIZE 0,
         wa_cabn1 TYPE ty_cabn1.
TYPES : BEGIN OF ty_cawn1,
    atinn TYPE cawn-atinn,
    atzhl TYPE cawn-atzhl,
    atwrt TYPE cawn-atwrt,
    end of ty_cawn1.
DATA : itab_cawn1 TYPE STANDARD TABLE OF ty_cawn1 INITIAL SIZE 0,
         wa_cawn1 TYPE ty_cawn1.
TYPES : BEGIN OF ty_cawnt1,
   pcs TYPE cawnt-atwtb,
    atinn TYPE cawnt-atinn,
    atzhl TYPE cawnt-atzhl,
    atwtb TYPE cawnt-atwtb,
      end of ty_cawnt1.
DATA : itab_cawnt1 TYPE TABLE OF ty_cawnt1,
         wa_cawnt1 TYPE ty_cawnt1.
TYPES : BEGIN OF ty_pcs1,
pcs TYPE cawnt-atwtb,
atwrt TYPE cawn-atwrt,
atwtb TYPE cawnt-atwtb,
    end of ty_pcs1.
DATA : itab_pcs3 TYPE TABLE OF ty_pcs1,
         itab_pcs4 TYPE TABLE OF ty_pcs1,
         wa_pcs1 TYPE ty_pcs1.
TYPES : BEGIN OF ty_pcsn,
matnr TYPE ausp-objek,
ebelp TYPE dynpread-stepl,
atwrt TYPE cawn-atwrt,
atwtb TYPE cawnt-atwtb,
END OF ty_pcsn.
DATA : itab_pcsn TYPE TABLE OF ty_pcsn,
         wa_pcsn TYPE ty_pcsn.
TYPES : BEGIN OF ty_ausp1,
     objek TYPE ausp-objek,
     atinn TYPE ausp-atinn,
     atwrt TYPE ausp-atwrt,
   END OF ty_ausp1.
DATA : itab_ausp1 TYPE STANDARD TABLE OF ty_ausp1 INITIAL SIZE 0,
         wa_ausp1   TYPE ty_ausp1.
DATA : param_name1(35) TYPE c.
DATA: progname1      TYPE sy-repid,
        dynnum1        TYPE sy-dynnr,
        dynpro_values1 TYPE TABLE OF dynpread,
        dynpro_values2 TYPE TABLE OF dynpread,
        field_value1   LIKE LINE OF dynpro_values1,
        ematn1         TYPE mara-matnr.
if sy-tcode ne 'ME23N' and sy-tcode ne 'ME23'. "psk
    clear : itab_cabn1,itab_cawn1,itab_cawnt1,itab_pcs3,itab_pcs4,itab_pcsn,itab_ausp1.
    clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
    if sy-uname eq 'IBM_ABAP'.
      param_name1 = '000000001'.
    else.
      param_name1 = '000000013'.
    endif.
    SELECT atnam
    FROM cabn
    INTO CORRESPONDING FIELDS OF TABLE itab_cabn1
    WHERE atinn = param_name1.
    select *
    FROM cawn
    into CORRESPONDING FIELDS OF TABLE itab_cawn1
    WHERE atinn = param_name1.
    if itab_cawn1[] is NOT INITIAL.
      SELECT atinn atzhl atwtb
      FROM cawnt
      INTo CORRESPONDING FIELDS OF TABLE itab_cawnt1
      FOR ALL ENTRIES IN itab_cawn1
      WHERE atinn = itab_cawn1-atinn
      AND atzhl = itab_cawn1-atzhl.
    endif.
    if itab_cawnt1[] is NOT INITIAL.
      sort itab_cawnt1 by atinn atzhl.
      loop at itab_cawnt1 INTO wa_cawnt1.
        READ TABLE itab_cawn1 INTO wa_cawn1 with key atinn = wa_cawnt1-atinn
                                                     atzhl = wa_cawnt1-atzhl BINARY SEARCH.
        if sy-subrc eq 0.
       CONCATENATE wa_cawn-atwrt '->' wa_cawnt-atwtb INTO wa_cawnt-pcs.
       MODIFY itab_cawnt FROM wa_cawnt TRANSPORTING pcs.
       wa_pcs-pcs = wa_cawnt-pcs.
          wa_pcs1-atwrt = wa_cawn1-atwrt.
          wa_pcs1-atwtb = wa_cawnt1-atwtb.
          append wa_pcs1 to itab_pcs3.
        ENDIF.
        CLEAR : wa_cawnt1,wa_cawn1, wa_pcs1.
      ENDLOOP.
    ENDIF.
    CLEAR: dynpro_values1, field_value1.
dynpro_values-FIELDNAME = 'MEPO1211-EMATN'.
APPEND dynpro_values.
    field_value1-fieldname = 'MEPO1211-ematn'.
    APPEND field_value1 TO dynpro_values1.
    progname1 = 'SAPLMEGUI'.
    dynnum1 = '1211'.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME                               = progname1
        DYNUMB                               = dynnum1
TRANSLATE_TO_UPPER                   = ' '
     REQUEST                                = 'A'
PERFORM_CONVERSION_EXITS             = ' '
PERFORM_INPUT_CONVERSION             = ' '
DETERMINE_LOOP_INDEX                 = ' '
START_SEARCH_IN_CURRENT_SCREEN       = ' '
START_SEARCH_IN_MAIN_SCREEN          = ' '
START_SEARCH_IN_STACKED_SCREEN       = ' '
START_SEARCH_ON_SCR_STACKPOS         = ' '
SEARCH_OWN_SUBSCREENS_FIRST          = ' '
SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
      TABLES
        DYNPFIELDS                           = dynpro_values1
   EXCEPTIONS
     INVALID_ABAPWORKAREA                 = 1
     INVALID_DYNPROFIELD                  = 2
     INVALID_DYNPRONAME                   = 3
     INVALID_DYNPRONUMMER                 = 4
     INVALID_REQUEST                      = 5
     NO_FIELDDESCRIPTION                  = 6
     INVALID_PARAMETER                    = 7
     UNDEFIND_ERROR                       = 8
     DOUBLE_CONVERSION                    = 9
     STEPL_NOT_FOUND                      = 10
     OTHERS                               = 11
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
READ TABLE dynpro_values1 INTO field_value1 with KEY fieldname = 'MEPO1211-EMATN'.
    LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
      clear ematn1.
      if sy-subrc eq 0.
        ematn1 = field_value1-fieldvalue.
      endif.
      if ematn1 is not INITIAL.
        clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = ematn1
          IMPORTING
            OUTPUT = ematn1.
        select *
        FROM ausp
        INTO CORRESPONDING FIELDS OF TABLE itab_ausp1
        WHERE objek = ematn1
        and atinn = param_name1.
        CLEAR itab_pcs4.
        if itab_ausp1[] is not INITIAL.
          sort itab_ausp1 by atinn atwrt.
          sort itab_cawn1 by atinn.
          READ TABLE itab_ausp1 INTO wa_ausp1 INDEX 1.
          loop at itab_cawn1 INTO wa_cawn1 WHERE atinn = wa_ausp1-atinn AND atwrt = wa_ausp1-atwrt.
            READ TABLE itab_cawnt1 INTO wa_cawnt1 WITH KEY atinn = wa_cawn1-atinn
                                                            atzhl = wa_cawn1-atzhl.
            if sy-subrc eq 0.
              wa_pcs1-atwrt = wa_cawn1-atwrt.
              wa_pcs1-atwtb = wa_cawnt1-atwtb.
              append wa_pcs1 to itab_pcs4.
              wa_pcsn-matnr = wa_ausp1-objek.
              wa_pcsn-ebelp = field_value1-stepl.
              wa_pcsn-atwrt = wa_cawn1-atwrt.
              wa_pcsn-atwtb = wa_cawnt1-atwtb.
              APPEND wa_pcsn to itab_pcsn.
            ENDIF.
            clear : wa_ausp1,wa_cawn1,wa_cawnt1.
          ENDLOOP.
        ENDIF.
       clear wa_pcs1.
       read TABLE itab_pcs4 into wa_pcs1 index 1.
       if sy-subrc eq 0.
         EKPO_CI-ZPCS = wa_pcs1-atwrt.
       endif.
      ENDIF.
    ENDLOOP.
    CLEAR: field_value1.
    LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
      clear wa_pcsn.
      if field_value1-fieldvalue is not INITIAL.
        read TABLE itab_pcsn INTO wa_pcsn with key matnr = field_value1-fieldvalue
                                                    ebelp = field_value1-stepl.
        if sy-subrc eq 0.
          clear EKPO_CI-ZPCS.
*EKPO_CI-ZPCS = wa_pcs1-atwrt.
          EKPO_CI-ZPCS = wa_pcsn-atwrt.
        endif.
      endif.
    ENDLOOP.
   CLEAR: field_value1, dynpro_values1.
   progname1 = 'SAPLXM06'.
   dynnum1   = '0111'.
   field_value1-fieldname = 'EKPO_CI-ZPCS'.
   APPEND field_value1 TO dynpro_values1.
   if ematn1 is not INITIAL.
     clear wa_pcs1.
     read TABLE itab_pcs4 into wa_pcs1 index 1.
     if sy-subrc eq 0.
       EKPO_CI-ZPCS = wa_pcs1-atwrt.
     endif.
   ENDIF.
endif.
ENDMODULE.                 " STATUS_0111 OUTPUT
Function exits:
^^^^^^^^^^^^^^^^^
EXIT_SAPMM06E_016
^^^^^^^^^^^^^^^^^
INCLUDE ZXM06U41 .
DATA XFISTL LIKE EKPO-FISTL.
TABLES: ADRC, T001W.
DATA: PLANT LIKE T001W-WERKS.
SELECT SINGLE * FROM T001W WHERE WERKS = I_EKPO-WERKS.
SELECT SINGLE * FROM ADRC WHERE ADDRNUMBER = T001W-ADRNR.
XFISTL = ADRC-SORT2.
SET PARAMETER ID 'FIS' FIELD XFISTL.
* Added For PCS 12.11.2010
DATA : fs_ekpo type EKPO_CI.
if sy-tcode = 'ME22N' or sy-tcode = 'ME23N'.
*  if tekpo-zpcs is INITIAL.
*    message e000(zmm) with 'PCS Type should be chosen'.
*  endif.
  loop at tekpo.
    if ( tekpo-ebeln eq i_ekpo-ebeln and tekpo-ebelp eq i_ekpo-ebelp ).
      ekpo_ci-zpcs = tekpo-zpcs.
    endif.
  ENDLOOP.
endif.
^^^^^^^^^^^^^^^^^
EXIT_SAPMM06E_018
^^^^^^^^^^^^^^^^^
INCLUDE ZXM06U40 .
E_CI_EKPO-ZPCS = EKPO_CI-ZPCS.
E_CI_UPDATE = 'X'.

URGENT:HOW TO COMBINE CLUSTER AND TRANSPARENT TABLE..WITHOUT USING FOR ALL

how can we join bkpf and bseg without using FOR ALL ENTRIES.HOW DO I COMBINE THE 2 TABLES SO THAT I GET BETTER PERFORMANCE.
START-OF-SELECTION.
SELECT bukrs belnr gjahr budat FROM bkpf INTO TABLE i_bkpf
WHERE bukrs = p_bukrs AND "COMPANY CODE
gjahr = p_gjahr AND "FISCAL YEAR
budat IN s_budat. "POSTING DATE IN DOC
IF sy-subrc = 0.
SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
i_bseg FOR ALL ENTRIES IN i_bkpf
WHERE bukrs = i_bkpf-bukrs AND "COMPANY CODE
belnr = i_bkpf-belnr AND "A/CING DOC NO
gjahr = i_bkpf-gjahr AND "FISCAL YEAR
hkont = p_hkont. "General Ledger Account"
IF sy-subrc = 0.
SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
i_bseg1 FOR ALL ENTRIES IN i_bseg
WHERE bukrs = i_bseg-bukrs AND "COMPANY CODE
belnr = i_bseg-belnr AND "A/CING DOC NO
gjahr = i_bseg-gjahr. "FISCAL YEAR
ENDIF.
ENDIF.
IF NOT i_bseg1[] IS INITIAL.
LOOP AT i_bseg1.
IF i_bseg1-hkont = p_hkont AND i_bseg1-shkzg = 'S'.
v_sumgl = v_sumgl + i_bseg1-dmbtr.
ELSEIF i_bseg1-hkont = p_hkont AND i_bseg1-shkzg = 'H'.
v_sumgl = v_sumgl - i_bseg1-dmbtr.
ELSEIF i_bseg1-hkont NE p_hkont .
IF i_bseg1-shkzg = 'H'.
i_bseg1-dmbtr = - i_bseg1-dmbtr.
ENDIF.
i_alv-hkont = i_bseg1-hkont.
i_alv-dmbtr = i_bseg1-dmbtr.
APPEND i_alv.
v_sumoffset = v_sumoffset + i_bseg1-dmbtr.
ENDIF.
ENDLOOP.
regards
Essam.([email protected])

Hi Friend,
I see your code.. there is no other way than using for all entries for your situation.. how ever i saw ur code and a small recommandation in the change of code.
SELECT bukrs belnr gjahr budat FROM bkpf INTO TABLE i_bkpf
WHERE bukrs = p_bukrs AND "COMPANY CODE
gjahr = p_gjahr AND "FISCAL YEAR
budat IN s_budat. "POSTING DATE IN DOC
IF sy-subrc = 0.
if not p_hkont is initial.
SELECT bukrs belnr gjahr hkont shkzg dmbtr FROM bseg INTO TABLE
i_bseg1 FOR ALL ENTRIES IN i_bkpf
WHERE bukrs = i_bseg-bukrs AND "COMPANY CODE
belnr = i_bseg-belnr AND "A/CING DOC NO
gjahr = i_bseg-gjahr. "FISCAL YEAR
ENDIF.
i_bseg[] = i_bseg[]1.
delete i_bseg where hkont ne p_hkont.
else.
Your existing logic...
endif.
In this way you can avoide writing two selects on bseg..
Thanks
Mahesh

Configure "Always hide forms document message bar" and "Do not show edit warnings" for all users?

We need to do a mass deployment of Adobe Reader XI 11.0.3 with "Always hide forms document message bar" preference setting automatically set for every user so they do not have to go through the menu and set it manually.
Is there a way to configure this for all users with the customization wizard or another method?
We also need to do the same for "Do not show edit warnings"
If these are registry keys, which registry keys set these options?

Try http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/DocumentStatus.html?zoom _highlight=message#idkeyname_1_5647.
If that doesn't work and there's a configuration item in the preferences UI, do this:
Get regshot.
Close everything but Acrobat/Reader.
Take a reg shot.
Configure the setting via the UI.
Tak another reg shot.
Compare the two.
That process will give you your answer.
If there is no corresponding pref in the UI, then you probably can't do it.
Ben

HT1677 When I am searching and enter what I am looking for all of my old emails are popping up. Is there a reason for this and way to remove it?

While searching with safari when I am typing in what I am searching for all of my old emails pop in that are related to the subject. Is there a reason for this and or way to rid the search of this?

Sometimes you want to just to search something that specific. Like if I am searching "ebay" I want the address and site for ebay to appear not everyone of my previous emails reguarding Ebay or searches in regards to ebay and this is all that pops up.

How to save a customized format and save it as default template for all reports?

Hi All,
I have a specific format to be followed for all the reports. I'm using WebI Rich Client 4.1 SP1. Can i create a template with this customized format and save to use it for all the reports in future as a default format. If so how can that be done?
Regards,
Naren Vema.

Naren,
Another option is, if you want to FORCE global stylesheet for ALL users. You can update the WebIDefaultStyleSheet.css located in \SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\images\ folder.
Regards,
Ajay

How to block for data sync between web cloud and each PC.I want control for all user's pc as administrator.

I already blocked as below url.
Sync/Store/Share Core Creative Cloud
https://creative.adobe.com/api/assets
https://creative.adobe.com/api/collections
hptts://creative.adobe.com/api/share
But one of user create file on C:\Users\Administrator\Creative Cloud Files it is sync with web cloud and another pc.
I saw sync on or off function in set up tap.
but I want block sync for all users as administrator.

Moving the discussion to File Hosting, Syncing, and Collaboration.
Thanks,
Atul Saini

Setting New Window and New Tab behavior in Safari for all users

I would like Firefox to open to the homepage I have set for our school district rather than seeing the tiles for all users.

hello mcdermk, you could have a look at this method in order to lock and deploy certain settings: http://kb.mozillazine.org/Locking_preferences
in order to set a custom new tab page, you can put this line into the mozilla.cfg file:
lockPref("browser.newtab.url", "www.example.com");

Fly reporting recording Begin and End of sub-sequences

Hi,
I've opted to use the Fly report option in T.S. 3.5 and have Excluded steps which Pass or are Done.
I was expecting the test report to show only a report header and any Failed lines.
However I find that the test report for a Passed unit includes lines recording the start and end of all
the sub-sequences, e.g. :
Begin example sub-sequence
End example sub-sequence
Any ideas how this detail can be excluded please.
thanks,
Gary.

Gary,
You would have to modify the relevant report generation sequence file.
Regards
Ray Farmer
Regards
Ray Farmer

Timer expiry to cause sequence failure

Hi,
I would like to cause a sequence to go to cleanup and the result to fail after a timer has expired.
At the moment in the 'Post Conditions' of the timers I have specified a custom condition expression: Step.Result.TimeoutOccured
On condition True: Go to Cleannup
On condition False: Go to next step.
How would it possible to modify the result to fail once the timer has expired?
Many thanks,

Hi feb,
Just had a look around the forums. Without a bit more information I'm not able to answer the question but maybe these posts will help you out?
http://forums.ni.com/ni/board/message?board.id=330&message.id=2605&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=330&message.id=4915&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=330&message.id=1982&requireLogin=False
Hope these help.
Is there any chance (if this doesn't help, you could forward on some of your code and I could have a closer look?)
AdamB
Applications Engineer
National Instruments
Applications Engineering Team Leader | National Instruments | UK & Ireland

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Similar Messages

Maybe you are looking for